Mouse Bluetooth disconnects

I'm going to hurt to keep my mouse Bluetooth Sony VGP-BMS11 connected to my laptop installed with the windows operating system 8. I connect it with the 'add device' Manager, but it only works for a few hours at most. If I shut my phone off or put it on sleep, the mouse doesn't even when the laptop wakes. I'll have to maintain the extraction device and put it back. I tried to download some drivers online, but this doesn't seem to help. Is there a permanent solution to fix this Bluetooth connection? Can anyone help?

It turns out that this problem is specific to the Sony Vaio 13 Pro or 1312 please... There is a hotfix available for download on the Sony product support site.

http://www.Sony-Asia.com/support/download/562740/product/svp13213cg

Tags: Windows

Similar Questions

  • Mouse Bluetooth disconnects randomly the macbook pro

    So, I have a logitech bluetooth mouse (M535) and sometimes it disconnect random for my mac and then reconnect a few moments later... Is there a reason that this is happening, or is it possible to fix it?

    Bluetooth devices no longer meet

    Sources of interference Bluetooth

    Sources of interference of Bluetooth (2)

    Problems of Bluetooth wireless

    If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

    Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

    Reset the NVRAM EXTRA memory

  • HP ENVY 15-k001nc: mouse Bluetooth keeps disconnecting windows 10

    Hi I tried to solve this problem for months. I got it before the big update of Windows 10, but now the problem is back.
    Someone knows what you should do about it. A driver that works? I tried to update driver, do back, driver, generic driver, bluetooth support service, refusing the computer to turn off this device to save power on the adapter bluetooth and Wi - Fi, and so on. But the mouse keeps always disconnect even in the middle of working with her.

    I've updated 10 64-bit Windows.
    Adaptor Bluetooth Broadcom 43142 4.0 14.07.2015 12.0.1.689
    HP mouse Bluetooth X4000b 21.06.2006 10.0.10586.63
    Broadcom BCM43142 802.11 bgn adapter Wi - Fi 02.07.2015 7.35.275.2

    Hi, thanks for your response.
    It seems that the problem was with the batteries
    Today, the bluetooth mouse worked for about 1.5 minutes, after turning the mouse market again for 15 seconds and then nothing. I measured 1, 5V AA batteries and they had just 1V.

  • Bluetooth mouse Microsoft disconnects randomly.

    Vista Ultimate 64-bit. Laptop HP HDX with Bluetooth / wireless card.  The MS 5000 Bluetooth Mouse mouse log and will not reconnect after slowing for a hour or two. Back to zero is to reconnect the mouse BT.

    Cycling the power on the mouse does not help, the cycling switch on the bluetooth card Wireless does not help. Purchased and installed BlueSoleil and it does not help. Disable and enable the driver software has no effect.

    Yes, the first thing that I tried has new batteries and have done so several times. I called Microsoft and they sent me a new Notebook 5000 BT mouse and it is exactly the same thing, it disconnects after being idle for an hour or two. The power settings for my lap top are defined to keep the wireless / bluetooth on at all time and without stopping to save energy or at any other time. Wireless Internett works all the time and never turned off, even when the BT mouse does not work.

    The only thing that works is to restart. Then, the Microsoft Bluetooth Notebook Mouse works contains 5000 embellish until it disconnects.

    Maybe I don't understand the use a BT mouse? Shouldn't it reconnect automatically after setting the idle, by simply moving the mouse? Everything I tried should not be necessary... wight?

    BTW, the first thing out of the mouth of the man, that I spoke to on the phone line to support MS was that XP is easy to use and VISTA was not!  THE FIRST THING SAID, WITH a SUPPORT of MS TECHNICIAN! He's the guy who sent me the new BT 5000 mouse that does the same thing as the old mouse.

    Original title: Microsoft Bluetooth Notebook Mouse 5000 disconnection... must reboot to reconnect

    Vista Ultimate 64-bit. Laptop HP HDX with Bluetooth / wireless card.  The MS 5000 Bluetooth Mouse mouse log and will not reconnect after slowing for a hour or two. Back to zero is to reconnect the mouse BT.

    Cycling the power on the mouse does not help, the cycling switch on the bluetooth card Wireless does not help. Purchased and installed BlueSoleil and it does not help. Disable and enable the driver software has no effect.

    The only thing that works is to restart. Then, the Microsoft Bluetooth Notebook Mouse works contains 5000 embellish until it disconnects.

    Maybe I don't understand the use a BT mouse? Shouldn't it reconnect automatically after setting the idle, by simply moving the mouse? Everything I tried should not be necessary... wight?

    It should work absolutely not.  There are a few more things to discover.  Have you tried both by clicking and moving the mouse buttons when you try to reconnect?  Experiment a bit with one or the other.

    Then see if disabling power on the Bluetooth radio management help.  Open the Device Manager, expand Bluetooth devices, find the device Bluetooth (not the enumerator), right-click on properties and go to the power management tab, if it exists.  Uncheck the box "Allow the computer to turn off the device to save power" to see if this changes the behavior at all.

    Thank you!
    Todd [MSFT]

  • The keyboard and mouse bluetooth suddenly stops working

    I asked this question before using Dell, but none of the answers provided.
    The keyboard and mouse bluetooth suddenly stops working.

    Given that this only happens when I'm online I make this question to the FireFox support.
    I have the latest version of FF:

    I installed the new BIOS and Shipset, but that does not change.

    Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

    R

    FredMcD said

    Keep a log of when this happens. What did you do when...

    Check the batteries.

    Hello

    Thanks for the help

    Just for information:

    I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

    Concerning

    R

  • the magic mouse keeps disconnect

    Since I upgrade 10.11.5 OS, (iMac, retina-1 years material) my magic mouse keeps disconnect in the middle of my work - installed new batteries. And, when my computer is asleep, it is not wake up. Everything freezes. Any thoughts?

    The index is with your comment "of the new batteries installed.    Once you have upgraded to 10,11 El Capitan, there is a mouse specially designed for this OS.   It is not really spoken aloud, but the box for the Magic Mouse 2 has a clear statement to be for OS 10.11 (+).   As operating systems go for ever higher, it may make sense to buy new mouse because all subsequent operating systems will need the facilities of this new creature.    The old mouse will work to some extent, but not, it seems, 100%.

  • IOS 9.2 Bluetooth disconnects on Apple music

    After the 9.2 ios updated my Bluetooth disconnects when I skip a song of Apple's music software. Is anyone having this problem? And it also happens to look like my ipad 2.

    I have an iPhone 6 and an iPad Mini 2 and use them with JayBirds BlueBuds X and only them tried for you. No disconnect - if jump using the buttons on the Atria or the screen of the device. Also tried a playlist on each that I had downloaded and another list of reading which has been streaming without any problem.

    You don't mention what device are you trying to use?

  • Mouse Bluetooth z8000 difficult to pair and stops working on Lenovo Yoga 3 Windows 10

    Just bought Lenovo Yoga 3 (which came with 10 Windows) and a mouse Bluetooth Z8000.  The mouse is difficult to pair (said matching did not work), but it can pair if the mouse is removed and readded, but then it stops working shortly after.  Yoga 3 supports Bluetooth 4.0.  Tried to install the driver Windows 8 HP and Lenovo Bluetooth driver update, but no change.

    Bruce

    I solved this problem:

    In Device Manager, expand Bluetooth, and then double-click Broadcom Bluetooth USB 4.0.
    In the Intel Wireless Bluetooth Properties dialog box, on the power management tab.
    Uncheck the box "allow the computer to turn off this device to save power".

  • Microsoft Arc Touch mouse Bluetooth works is not on my notebook of notes Windows 7 Ultimate edition and windows desktop 8!

    Hello world

    I just bought Microsoft Arc Touch Mouse Bluetooth to use it on my laptop Vaio PC Windows 7 Ultimate. My PC mouse detected and installed in the PC devices and printers folder. But that's all. Regardless of what I do on the mouse not recognized by PC (no cursor movement!). There are a number of support in the manual, but they say different division of Microsoft is nothing to do with the mouse! There is a web page address in the manual to download the drivers, but there are no drivers provided on this page. I tested on my office windows 8.1 also but get the same result!

    I buy an incompatible mouse to my PC? No where on the box of the product or in the manual of any mention of any specific PC it is exclusively designed for!

    Can we thru' shed some light on this? so that I can return it to the store if necessary?

    Thanks in advance.

    Hello

    Thanks for posting your query in Microsoft Community.

    From the description, I understand that the Microsoft Arc Touch Bluetooth mouse does not work on windows and Windows 7 Ultimate notebook office 8.1.

    Let me tell you that Microsoft Arc Touch Bluetooth Mouse is compatible with these operating systems: Windows, Windows 8, Windows RT 8.1 and Windows RT 8.1
    So it does not work with windows 7. As the problem persists even after logging in to windows 8.1, the equipment may be defective. I suggest you contact Microsoft support hardware for more help.

    In the meantime, you can try the following methods and check.

    Method 1: Install the implementation for the Arc Touch Bluetooth mouse.
    Please see the link below:
    http://www.Microsoft.com/hardware/en-us/d/arc-touch-Bluetooth-mouse

    Method 2: Troubleshooting of hardware and devices
    The hardware and devices troubleshooter can detect and correct errors and incorrect settings in devices. You can view these steps to run this utility for troubleshooting:
    (a) press the Windows key + X, select Control Panel
    (b) change the display option in the top right large icons
    (c) click on troubleshooting and click the view all option on the left panel
    (d) run the hardware and devices troubleshooter.

    Method 3:
    You can see the article mentioned below if the problem persists.
    Troubleshooting: mouse
    http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

    You can read the articles for more information.

    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398

    Why Windows is not find my device?
    http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_3

    If the problem persists, contact Microsoft Support Hardware.
    http://www.Microsoft.com/hardware/en-us/support
     
     
    For any Windows help in the future, feel free to contact us and we will be happy to help you.

  • Mouse keeps disconnecting and connecting

    I am running windows 7 Professional on my PC and for some reason, I started to get an error with the mouse 'guard disconnect and reconnect' for some reason any. I was using the mouse for a while, but this problem has never happened before, but now it keeps on past and he began to irritate me off the coast until someone knows a solution to this problem?

    That may mean its cord is damaged or worn out inside.  Have you tried another mouse?

  • Magic Mouse guard disconnection

    Hello! Sorry if I am posting this in the wrong area and I can't find the section of the Magic Mouse.

    Anyway, when I use my magic mouse, at random times it disconnects. I did so many things that have been posted here on the forums and it still does not work. I even tried to restart the iMac and pressing Cmd, Alt, P and R, I heard the iMac from sound twice and tried will remove the com.apple.Bluetooth.plist but guess what? This file does not exist for me... I use OS X El Capitan.

    And Yes. My batteries are 94%...

    Can someone help me? I've been at this for hours!

    Thanks in advance!

    com.apple.Bluetooth.plist should be in the Preferences.

    You have any other features Bluetooh nearby that can cause interference?

  • Mouse magic disconnection since 10.11.2 upgrade

    Since the update of this week OSX, my Magic Mouse disconnects frequently Bluetooth. Was working fine before. Have changed batteries. Removed and re-paired, but still the problem persists. Seems to be triggered by the use of the extended screen - when I move on the other screen the disconnection is instantaneous. Very welcome solutions!

    Try resetting the PRAM.

    Barry

  • Motorola sjyn0817a mouse bluetooth pairing issue

    Motorola sjyn0817a bluetooth mouse pairing question. Initially, the mouse paired with my computer hp laptop dv4 but after 3 or 4 days, he stopped the match. my laptop recognizes the mouse but the mouse does not respond or doesn't work.

    When I try to pair it with the blue botton of the mouse, orange/blue light on the mouse is blue and blinks several times after that he died and mouse does not respond.

    support for Bluetooth on my laptop is Autostart with bluetooth radio disabled the laptop to allow him to saving mode. also uninstalled the mouse for some time and added back the Device Manager without result. my laptop is win7 home premium 64 bit.

    don't know what else I can check?  Thank you for your help or suggestions in advance :)

    Hello

    1. You disconnect your mouse and plug it in again to see if it solves the problem?
    2. Have you tried a different mouse to check if his mouse issue?
    3. Have you checked if the same mouse works in another computer?

    Method 1: Check the setting sin Control Panel.

    1. Click Start.
    2. Select settings.
    3. Go to the control panel.
    4. Open the mouse.
    5. When the window opens see if "switch primary and secondary button" is checked or not.

    If it isn't check, check that it and click on apply. In this way, you will make your right button as your primary button.

    Now with the window of mouse, always open options, double click with the right button on the folder under the area "double click speed.

    Method 2: Run the troubleshooter of material:

    Open the hardware and devices Troubleshooter

    http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

    Method 3: Solve the Bluetooth devices

    The problems with Bluetooth devices

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    For more information, visit the following link: -.

    Change the settings of the mouse

    http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

    If the problem persists, contact the manufacturer Motorola to improve assistance to this topic:

    https://Motorola-global-portal.custhelp.com/app/chat/chat_launch/p_country_code/us/p_reference/moto_integration.php

    It will be useful.

  • Issue of iOS 9.3 Bluetooth disconnection

    I noticed that * might * have a bug with iOS 9.3.  All my devices using bluetooth now seem to disconnect randomly when using.  All my cars, headphones, bluetooth etc. soundbars have met randomly ~ 10 second interruption in the connection during normal use.  Devices will reconnect sometimes, other times I have to turn off the accessory and start up.  What happens with a 6s and is verified as event at least 6 different various vintage accessories using bluetooth.  Everyone has noticed this after the upgrade to 9.3?  Before application of 9.3 I had never seen this error before.  I also had this happen with at least a helmet on my iPad Pro using 9.3 as well.  I did the reboot standard/forget and repair etc and nothing seems to fix this.

    The confirmation that it is in fact a problem or advice would be appreciated!

    I have the same problem on iPhone 6s, iOS9.3

    Had no abandonment before that.

  • Qosmio F50 - keyboard and mouse USB disconnects for 2-3 sec

    Hello

    Well use a keyboard and a USB mouse to play games on it

    Somehow my mouse is "Razer Lachesis keyboard is 'Razer Lycosa' and I just installed the latest drivers for them."

    The problem is that my keyboard disconnects sometimes for 2-3 sec then am playing, but the mouse sometimes move slowly and don t answer correctly for the same duration 2-3 sec. I've tried everything updated and I went on Google and I didn t find something that can help

    In any case use windows Vista 32 - bit with latest updates and I didn't change the original Vista provided with my Qosmio F50 t.

    I hope you can help

    Hello

    Have you noticed intensively the HARD disk activity when this happens?
    East - the HDD LED flashes when the mouse or keyboard do not respond?

Maybe you are looking for

  • Skype problem - last version does not, please help

    So I can't install the latest version of Skype. It's really frustrating because whenever I try to install it, an error comes up saying "Failed to get address of procedure for GetLogicalProcessorInformation (KERNEL32.dll)"-J' tried to open Skype after

  • iPad 2: addition of 'peripheral' for synchronization

    I can add a non-Apple device, for example, your desktop PC Windows 10 w / the latest version of iTunes, to my list of "peripheral" on my account page Apple to facilitate synchronization of music?

  • Conect in europe

    I can connect my computer desk in Europe? (220 volts)

  • is it possible to increase the content of a digital picture by a constant.

    Hello I use the universal library to read a voltage from a data acquisition device, and it seems that the playback feature is put in a 1 d table then in a chart. I need to get this tension and multiply by a number and couldn't just as it is in table

  • Display error string indicator messages

    Hello world This time, my dilemma is as follows: I work in a machine control application where I provide a display of error messages to show the machine Operteur some text links to the fault. I intend to use an array of strings and a logic to select