mouse buttons act as touch pad

Pavilion DM1 - 3245CA Windows7 64 bit.

Right out of the box, I found the touchpad to be extremely frustrating that the delimited areas as 'right' and 'left' mouse click the points are just as sensitive to the touch as the touchpad itself.  The area of the mouse button can be used as the Tablet!  Therefore, when you touch the area to the right or left click on the mouse often jumps to a new location, which sometimes causes other "destination".

When I followed the instructions on the web site to modify the sensitivity of the touchpad or mouse button areas, the screens I see are different to those indicated for this machine and driver downloads for the touch pad indicates that I have the drivers.

From my point of view, it is a flaw that makes it almost impossible using this computer without using a USB mouse.


Boring, so you know what.

Figured it out on my dm1z

Go to mouse properties in Control Panel and then device settings tab, and then click settings

Under scrolling of the matches of the Palm check...

Drag on the gear icon and click on it, it should open a configuration window

I put the activation time filter 0

then I check the two boxes of restriction

then I move the mouse over the black central square at the bottom of the starting area, and then drag upward a bit take outside the touchpad buttons. Press close and OK endangered.

crazyiest touchpad I've ever seen, I still have problems moving the slider even with this setting.

Let me know if find you the best settings



Tags: Notebooks

Similar Questions

  • Buttons on the touch pad G505s does not properly in game?

    This is the second time I am posting this because of no response:

    I recently bought a Lenovo G505s about a month ago. Everything goes well with her until I downloaded Steam and downloaded games. 3 games I downloaded are snipers and therefore requires the left button of the mouse. But when I click it to shoot, he is sometimes unresponsive and is very laggy. This isn't the fault of the game, as I tried in different, but the problem is still there. I tried to change the round buttons (so that the right button is left to aim and shoot) and it works fine. I'd rather have the usual way around fact does anyone have a way to solve this problem? has this happened to you?

    If it is necessary here are some specs for the pc:

    AMD A8

    6 GB of ram

    WIndows 8.1

    also the buttons and trackpad works quite well with everything else except the game like Minecraft. It seems that when I move with WASD, the button does not work but the click of the button.

    Can someone give me an answer please?

    only, I have solved my problem. While randomly browsing settings for my PC, I stumbled upon the Windows mouse settings and it turns out that the time for clicks has been in the Middle, which explains the shift. I have this disables and problem solved without help of Lenovo at all. Lenovo support team good job

  • Portege R930 - Touch Pad on / off button does not work


    R930 nine (PT330A) and a minor but annoying thing... the small button above the touch pad and below the space bar for the Touch Pad on / off does not work. I can't find the configuration options for this anywhere. Fn + F9 works very well.

    Not much, but I like things to work! And this button would be very convenient for a quick switch.

    Thank you

    Can you use the Toshiba? I think you should have the button eco and presentation on this machine.

    Check please if you can enable/disable these keys in the HWsetup tool.
    I don t have Win8 machine, but I think that all these buttons can be enabled/disabled.

    Please, check and send comments.

  • Pro L10: After using a wireless mouse, the touch pad has stopped working

    Pro L10. After using a wireless mouse, the built in touch pad has stopped working properly. At the start of the keypad icon touch shows and the touchpad works intermittently, after a few minuets, the icon disappears and the touch pad stops working. In the control panel / mouse & or device drive I can how the program works, then disappears.

    I deleted the software and reinstalled nothing doesn't. In some cases, I get a message that a pointer is on.

    Can you help me?


    It seems that the wireless mouse or mouse wireless drivers/software has a bad influence on the touchpad.
    I put t have a good solution for this problem. Well, you can consult the page of the Toshiba driver for latest driver updates. If the updates doesn't solve this problem I suggest to use either the mouse wireless and disable the touchpad with FN + F9 key combination or use a regular USB mouse.
    I guess that you are having regular problems with a USB mouse.

  • Reverse the mouse buttons on a laptop running Vista Ultimate

    I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

    I use Vista Ultimate on a laptop. I want to reverse the mouse buttons.  When I check the control panel to reverse the buttons on the touch pad works like a 'right click '.  How can I reverse the buttons without messing up the keys.

    I want to assure you that I understand what you want...
    You want with your mouse, click LEFT to open and do a RIGHT click to select?
    If so, right-click on a free space of the desktop > customize > mouse pointers > now here is the tricky part. I use a Dell computer. If you do not have a Dell, I'm not sure that you can follow from here. > you have a tab button? If so, click on it > under button Configuration, select "Switch primary and secondary buttons" > apply/OK
    See screenshot...


  • Satellite L500 - touch pad mouse buttons malfunction

    I had a Satellite L500 with Windows 7 and recently the touchpad mouse buttons started doing strange things, when clicking on the right button it seems to work like the left button (for example, the window with cut, copy, paste, etc.) rises, it will continue to happen until you click the left button a few times and then the normal operation is restored for a couple of actions and then it happen again.

    Has anyone already happen or offer any suggestions as to the cause and possible solutions?

    Thank you very much

    I really don't know why your touchpad and buttons Act so crazy, but you can try to do is to open the touchpad settings (Synaptics I think) and set it to default settings).

    After having again the functionality of this control.

  • Left click the Satellite C660 Touch Pad/buttons does not work

    Hi guys!
    I own a Toshiba Satellite C660 (of course: P) anyway. Today, I was just doing what I do usually on my laptop,
    when suddenly the left button of the mouse has stopped working. (Bare with me, it's very weird to explain xD!) Also I can not 'left click' on my touch pad. I can still move the cursor with the touchpad and right click with the right button.

    I tried slightly shaking incase of crumbs, or something. Although I never eat around my laptop. It is not difficult to grow as there is something under it, it just doesn't work!

    In summary, I can't left click. But I'm able to move and made a click right, weird!

    For the moment I have my USB mouse plugged in my computer and it works fine, but it is very annoying!

    Sorry if I don't explain it too well!

    Help, please!

    On this virtual path, it is not easy to say what the problem is here. It is not easy to tell if the left touchpad button is faulty or disabled in some way.

    As a first step, you should check all the settings for the touchpad. If your laptop computer has preinstalled software check Synaptics all parameters associated with the touchpad buttons.

  • my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    my touch pad on my laptop does not move the pointer, but when I have my mouse wireless pluged in it will work I was told I could have disabled the touch pad which I have to do to activate it again?

    Hi dove2k,


    Welcome to Microsoft Answers Forums.

    You will need to enable the touchpad on the laptop itself.

    Find the area of the touch pad, you will find a button to enable or disable the touchpad.

    If the step above doesn't, try this step.

    Go to control panel > mouse > device settings tab
    Click (or to disable)

    On some models, there is a keyboard shortcut to enable or disable the touchpad. For example, ACER, just do Fn + F7.
    You can click on Reset device if none of these solutions work.

    If you still can't touch pad to work, you will need to contact the manufacturer of the laptop computer for more information.

    Halima S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Equium L10 - touch pad stop working (mouse)

    Hi guys,.

    really need your help. I have an Equium L10-300 and my touch pad has stopped working. A few days back, he started to freeze, but reboot solved the problem... but now it has stopped working all together. The icon that normally indicates at the bottom right of the screen disappeared. Have done the FN9 thing and tried to look at the settings...

    Help, please

    Thanks, Pete

    Hi friend

    have you already tried to remove the mouse from the Device Manager? Or reinstall the driver would also be a very good attempt to resolve this situation as a whole.

    The first step that needs to be done is to exclude a software error, then go->> support downloads & -> support-> download home page-> download drivers

    Get the driver for your mouse and reinstall. If it shouldn´t work then come here and we will see what could be the next step...

    Welcome them

  • Satellite A660 - touch pad / stop and other buttons do not work

    Dear people on this forum,

    Recently, about 3 weeks ago, I turned on my computer and I cleaned out the dust because it was overheating.

    about 2 weeks before, I noticed that my touchpad is not working and the buttons at the top of the page do not work, there is no light (multimedia audio buttons wireless) I can't activate/deactivate or either, I don't know how. I don't know if the problem because I cleaned my laptop and has not logged a few threads back but I included this detail because I do not use these buttons if I haven't noticed if they were on. but he said: 2 days ago, I don't know how my wireless exploded Ant when I press fn + f8 (wireless) wireless communication switch is turned off, which is one of the buttons is not working (upstairs next to / switch even with my touch pad)

    I tried the following:

    Windows Update
    turn off the computer, remove all cables and battery and wait for about 30 minutes. Then then hold down the button for 30 seconds
    Reinstall the support flash cards, hw Setup utility / value pack
    and finally a Toshiba out of the recovery of the box using the recovery of 2 cd product

    I don't know what to do next. It's either:

    try something else
    or is there a wire is connected both touchpad and the buttons at the top and I have to open my laptop and connect them.

    Please answer as to my next step to get my wireless.

    Your dear member of the forums, kaujis

    Post edited by: kaujis

    Please don t get me wrong, but I don t know how to help you now. Disassembly of the laptop is to only authorized persons and if you do it on your own there is always a risk that something may be hurt or may be damaged.

    OK, I must also say that I also removed my machine too but I got lucky and everything is OK as before.
    I put t know how A660 looks inside, but the principle is still the same and I can't imagine you have whatever it is damaged.
    You know very well that we cannot say much about your problem. What you need to do now is the final test of functionality and install original recovery image that you got with your laptop. Test the functionality with the factory settings. If the problem is still there, I m afraid you must open for new laptop and check if everything is connected correctly.

    Last option is to contact the service and ask for help.

  • How to configure the automatic change of "blue tooth mouse" to "touch pad"?

    00F00D Toshiba PSP CDA-how do to implement the automatic change of "blue tooth mouse" to "touch pad". When 'blue tooth mouse' is disabled or no signal, cell automatically changes to "touch pad" & visa versa.


    You can turn off the tapping in the mouse properties. Go to control panel > mouse. In advanced options, you can disable this feature if the driver is correctly installed.

  • How to disable the touch pad so I can use my wireless mouse?

    How can I disable the touchpad on my SONY VAIO now that I use a wireless mouse?
    The problem is that the cursor continues to jump back when I type, then this morrectiony sentence inserted into itself.  As a demonstration that I type this this setence without any c. REA touch pad is soplutiobn PLease help! L probme asnand I guess that this turning point
    It's the
    Help, please!
    Caroline Reid

    See (don't forget the warning to connect an external mouse before disabling the touchpad).

    Another version:

  • My button touch pad not scroll more. How do I turn it back on?

    I ran a program of doctor PC through QWEST and now my touch pad button wil no longer scroll. Now, I have to use the arrow keys on my keyboard.

    Try a system restore to a Date before the problem began:

    Restore point:

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.


    Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

    See you soon.

    Mick Murphy - Microsoft partner

  • touch pad mouse

    I have a Dell Inspiron E1705 and I had to have my replaced hard and now the touch pad mouse appears as an external mouse and I can't turn it off if when I use and external mouse, I keep bumping it.

    Go to the control and mouse control panel applet and click on the tab settings of the device on the pad touch and then properties. Locate and disable (uncheck) the option of tapping.
    I hope this helps.
    Good day.

  • Touch pad to turn off Windows 7 when the mouse remotely installed as I could in Windows XP

    In Windows XP, I could go to control pannel, mouse and click to Disable Touchpad when another mouse was attached.  It would be automatically on the touch pad if no mouse was attached USB.  I couldn't locate any method or the answer that allowed a change of software touchpad in Windows 7.

    I had an old Dell D820, installed Win7 and couldn't find a way to disable the touchpad and keys/stick.  Based on other suggestions, I went to the Dell website and downloaded the drivers Vista (Win7 drivers not available).  As soon as he installed and rebooted, I had an icon in the Sys Tray (by the clock) that I could then select a setting to turn off when the external mouse connected.  So for those who said it is a pilot thing, I agree with them.

Maybe you are looking for