mouse does not! is it possible to activate when you changed the bateries?

I have a hp touch smart pc 520 and can not get the mouse works after that I get batteries

In fact nothing.

With almost all the keyboard and mouse wireless and Bluetooth, there is a button you open to the press on the transmitter/receiver dongle, and then on the bottom of the keyboard and mouse to connect wireless again.

Here is a document from HP with an explanation of how it works.

Tags: HP Desktops

Similar Questions

  • EliteBook 2740 recharge does not and HP product Assistant crashes when you start the battery check

    I just buy an elitebook 2740.  When I hover over the battery and plug icon in the taskbar, it says do not charge battery.  I tried to uninstall the ACPI compatible driver in the Device Manager and scan for new hardware to reinstall it, and it worked the first time.  But now it does nothing.  When I open produced tune, I get an error message and the program crashes when starting the battery check.

    Yes, I downloaded and installed the BIOS and chipset drivers and followed by the shutdown sequence.  It's the job niow.  I called Technical Support and learned that the battery does not load when it reaches a certain percentile because the computer recognizes it has a good charge.  When it is less than 95% fresh or so, it will load.  Mine does not work correctly.  Appreciate your help, I wasn't aware of this design feature before now.  Overall it was a good exercise.

  • PC does not, but windows 7 will be when you press the stop button

    CTM PC with Intel DQ45CB M/Bd - has an Intel Core 2 Quad CPU Q8400 @ 2 .66GHz clocked at 2.66 GHz

    System op of Win 7, latest updates everything is made.

    BIOS reset by changing the jumper block of configuration 1-2 to 2-3 m/bd. Restart the pc & then putting again. The battery also renewed. Also BIOS update made to the most recent available.

    Have you tried bypassing startup items and services to the configuration system. It does not correctly close from safe mode?

    I ran out of clues someone at - it a suggestion?

    Did you get my reply. Your suggestions led me to check the hardware including RAM - a few intermittent defective RAM sticks was the answer. It caused blue screens & also the prob of closing.

    Thanks for your help.

    (I'll mark this as answer - my previous attempt I've marked as an answer & it's gone)

    Your help much appreciated / Lyle Giles.

  • Hi all OneHow can you buy an IBook UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing.

    Hello world

    How can buy you an IBook of UK not available in Indian store a store; When you change the status of your country, your billing information and credit cards won't work; is there a solution for this using the same method of billing

    There is no solution, if it is not available in your area, you can't buy it.

  • Firefox does not open, says he is running when you try to restart, but does not appear

    Can't get Firefox to run visibly. Does not open in safe mode and does not close (said his execution when I try to shut down or restart the computer.) Have uninstalled Firefox and reinstalled 8.0 several times and nothing has changed. Have swept, defragmented, computer etc. and I tried some restorations system until this similar problem once cured with Firefox several months ago.

    Bring up the Windows Task Manager, but look in the "Process" tab for firefox.exe,.
    and shut it down from there, it won't do you any good search in "Applications".
    tab when you do not see the system taskbar.

    Firefox is closed correctly, and for when you just want to close and
    Immediately restart Firefox, see more information

    https://support.Mozilla.com/questions/866027
  • Store does not recognize my administrator user account when you try to upgrade Windows 8 to 8.1 Windows

    I bought an Inspiron 17 7737 directly from dell.com on 05/12/2013.  It was delivered 12/182013.  The operating system was Windows 8.  I had assumed that he would have the last version of Windows when it has happened since 8.1 was released in October. I opened the app Store and the Windows 8.1 upgrade was not available for me.  I realized it was one problem for others and that he has not pursued further at that time.  I was out of town for 2 weeks in January and has not used the laptop during this 2 week period.  When I got home, I opened the store and found placed prominently on the invitation to the free update to 8.1. I signed up using the administrator account and when I hit the download button for 8.1. I received the message "You must use an account with administrator privileges to install Windows 8.1, try connecting with the user of an administrator on this PC account and try the update again".  I checked my account has administrator privileges and tried again and got the same message. I created another user account and gives privileges to administrator and try the download again signed on this account and received the same message.  I called technical support and for more than 5 hours on 2 different days, the technician tried to solve the problem by uninstalling and reinstalling the Windows updates. When that has not resolved the problem, it "refreshed" my PC which I understood to be given to the State at the time of delivery. He had to do all the Windows (about 65) updates and tried to re-download 8.1.  This does not change the error message when you try to download at 8.1.  At that time, I was told that they were raising a technical team that search every newspaper in my machine and find a solution.  They said they'd call me at the time where there is a solution. Although my administrator account has not been recognized during an attempt to make the download 8.1, it acknowledged the role of the administrator when the technician needed administrative approval to all uninstall and reinstall activities in trying to solve the problem.

    Everyone knows about this problem?  It is resolved, and if so, how is it resolved?

    You are not alone. Many have had the same problem with no resolution. I think there's something funny to do with user accounts. Making a second account with admin privleges does not work. I would try to reinstall the operating system of hidden image and try again. A refresh like tried Dell will not do because it retains much of the data before the update; you need a clean start. Do nothing witht the account Admin other than to let Windows put up and set your password. All updates must be installed before the upgrade is displayed in the store. I have improved five facilities to win 8 and have had zero problems.

  • Alertlog location does not change when you change the setting bdump

    Hello

    I changed the background_dump_dest parameter to a new location, but the database continues logging in the old file. I already tried to delete the old file alertlog, but creates the database again on the old path of destination. The other papers in bdump (*.trc) have been properly redirected to the new location.

    I have to restart the instance so that the change can take place? Is this a bug in Oracle?

    DB version: 10.2.0.3
    OS: - Linux 2.6.18 - 53.el5xen #1 SMP Sat Nov 10 19:46:06 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux


    Thank you in advance,

    albrotar wrote:
    Yes, I've already specified the DB version (s. first post of this thread). It comes to 10.2.0.3

    In this case, I would say that it requires a reboot.
    It was stated in the bug: Bug 3412765

    All trace files will be generated in the new location but not alert log.

    Concerning
    Anurag

  • What does the green check mark when you change the info from an average of song?

    I imported an album in ITunes, I bought on Amazon and for some reason, adjust the volume slider is all the way up to + 100% on all of his songs. Whenever I try to change this back to normal, a little green check mark next to it. When I click on it, it is up to + 100%. When I ignore it and click on OK, he returned to high volume and won't let me change it. The green check mark means something? How should I do? I don't want to have my ears bleed whenever a song from the album appears when I shuffle. And I really like this album.

    The green check mark recognizes that there is a change of treatment. At this point, you must click OK if you want to accept changes or Cancel if you do not.

    In some cases, iTunes will not commit a change if the file is read-only or your account does not have sufficient permissions to make changes. See fix for iTunes for Windows security permissions , if necessary.

    TT2

  • Our plug-in did not load with Acrobat 9 Pro when you open the PDF from outlook?

    We have a plug-in for Acrobat Pro 9 and 10.  The plug-in will be responsible if a local pdf file opening.  However, when you try to open the file PDF of Outlook 2013 (x 86), our plug-in not was not loaded.  Any suggestions?

    Thank you
    Weiqun

    In any case, I found the answer myself by using the process monitor.  The reason for our plugin dest does not work because it has been installed in a subdirectory under the plug-in.  Once I moved the plugin directly under the plug-ins directory, the plug-in has been loaded correctly.

    Process monitor, when you load Acrobat from Outlook, Acrobat tries to enumerate all subdirectories under the plug-in, and it finds the api (for example \sample\sample.api).  But somehow he will attempt to create the file directly under the plugin: C:\Program Files (x 86) \Adobe\Acrobat 9.0\Acrobat\plug_ins\sample.api and get the error NAME_NOT_FOUND.

  • When you change the date range, some data refresh some is not the case.

    In looking at some the report explore end-user (EU - FxM cartridge), I noticed that some data are updated based on the data and the time I selected. I noticed that the response time service level and measures processing time service level (metric in the green circle) doesn't refresh at all. I noticed the same behavior when you look at some different indicators in the report to explore end-user. Anyone encountered this?

    I think you are referring to this point of view, but I don't know how you got there from the browser of the end user:

    Looking at the Design tab in the right pane of Action and selecting the view "user end/FxM/Applications/Application Service level Layout" to inspect, it turns out that "jelly bean" service level indicators are configured to display:

    / responseTimeServiceLevel/value/latest/min

    / processingTimeServiceLevel/value/latest/min

    As the notes of Osama, the "last" value here will not change when the time interval of page is updated.

    Contrary to what he says, if this dashboard has been configured to display the "current" value, these indicators would show the last value not expired before the end of the time range of page.

    You can:

    -Open a session to demand that this configuration of the dashboard be changed in a future release, a matter of pension

    -change this system view (which will not survive an upgrade of the FxM cartridge)

    -(deep) to copy the view "User end/FxM/Applications/FxM information request" and change the copied view (which survive and upgrade). You must also change the type mapping "FxM Application result" in Applications/FxM/end user to point to your point of view, updated the.

    Kind regards

    Brian Wheeldon

  • Photo editing program does not work when you change the color and brightness.

    I'm trying to change my photos. When I try to make the picture turns into a bunch of dashes and spaces. I believe that the photo program is corrupted. It crashed the PC and reload the OS X El Capitan.

    With the amount of information you provided that it is impossible to offer a solution.  We cannot see your computer so we need to know the details of your problem and the configuration, i.e.:

    • What system do you use?
    • What version of iPhoto do you run?
    • where is your library? If it's on an external HD how this drive is formatted and connected to your Mac?
    • did you apply the updates or upgrades just before the problem occurs?
    • you run a library "managed" or "referenced"?

    • How much free space on your startup disk?
    • What difficulties have tried?

    Download and run Etrecheck.  Copy and paste the results in your response. Etrecheck is a diagnostic tool that has been developed by one of the most respected users here (and recommended by Apple's Support personnel) of the CSA to provide a snapshot of the system and help identify the most obvious culprits that can adversely affect the performance of a Mac.

  • Database does not start... ALTER database open; change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    HI during startup of the database of the following errors is. Please help solve the problem.

    SQL > alter database open;

    change the database open * ERROR at line 1: ORA-03113: end of file on the channel of communication process ID: 10400 Session ID: 418 serial number: 3 -.

    ============================================================

    Please see the alerts log entries

    --------------------------------------------------------------------------------------------------------------------------------

    Commissioning:

    Oracle Database 11 g Enterprise Edition Release 11.2.0.1.0 - 64 bit Production

    With the options of partitioning, OLAP, Data Mining and Real Application Testing.

    Using parameters in spfile D:\APP\ADMINISTRATOR\PRODUCT\11.2.0\DBHOME_1\DATABASE\SPFILEATTNDPRD server-side. ORA

    Parameters of the system with default values:

    process = 400

    sessions = 624

    memory_target = 4G

    control_files = 'D:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB0M_. CTL.

    control_files = 'C:\ORACLE\ORADATA\ATTNDPRD\CONTROLFILE\O1_MF_8LRQYB13_. CTL.

    DB_BLOCK_SIZE = 8192

    compatible = "11.2.0.0.0."

    log_archive_format = "ARC%S_%R.%T."

    db_create_file_dest = 'D:\oracle\oradata. '

    db_create_online_log_dest_1 = "D:\oracle\oradata".

    db_create_online_log_dest_2 = "C:\oracle\oradata".

    db_recovery_file_dest = 'C:\oracle\oradata\flash_area. '

    db_recovery_file_dest_size = 8G

    undo_tablespace = 'UNDOTBS1.

    Remote_login_passwordfile = "EXCLUSIVE."

    db_domain = «»

    dispatchers = "(PROTOCOL=TCP) (SERVICE = ATTNDPRDXDB)" "

    audit_file_dest = "D:\APP\ADMINISTRATOR\ADMIN\ATTNDPRD\ADUMP".

    AUDIT_TRAIL = 'DB '.

    db_name = "ATTNDPRD".

    open_cursors = 300

    diagnostic_dest = "D:\APP\ADMINISTRATOR".

    Sun 24 May 13:43:09 2015

    PMON started with pid = 2, OS id = 5792

    Sun 24 May 13:43:09 2015

    VKTM started with pid = 3, OS id = 6500 high priority

    VKTM clocked at (10) precision of milliseconds with DBRM quantum (100) ms

    Sun 24 May 13:43:09 2015

    GEN0 started with pid = 4, OS id = 13072

    Sun 24 May 13:43:09 2015

    DIAG started with pid = 5, OS id = 1424

    Sun 24 May 13:43:09 2015

    DBRM started with pid = 6, OS id = 8240

    Sun 24 May 13:43:09 2015

    PSP0 started with pid = 7, OS id = 2980

    Sun 24 May 13:43:09 2015

    DIA0 started with pid = 8, OS id = 12956

    Sun 24 May 13:43:09 2015

    MA started with pid = 9, OS id = 13356

    Sun 24 May 13:43:09 2015

    DBW0 started with pid = 10, OS id = 14248

    Sun 24 May 13:43:09 2015

    DBW1 started with pid = 11, OS id = 17900

    Sun 24 May 13:43:09 2015

    LGWR started with pid = 12, OS id = 5564

    Sun 24 May 13:43:09 2015

    CKPT started with pid = 13, OS id = 16736

    Sun 24 May 13:43:09 2015

    SMON started with pid = 14, OS id = 14068

    Sun 24 May 13:43:09 2015

    RECCE has started with pid = 15, OS id = 16288

    Sun 24 May 13:43:09 2015

    MMON started with pid = 16, OS id = 10884

    commissioning 1 dispatcher (s) for '(ADDRESS =(PARTIAL=YES) (PROTOCOL = TCP))' network address...

    commissioning or shared server 1...

    Environment ORACLE_BASE = D:\app\Administrator

    Sun 24 May 13:43:09 2015

    ALTER DATABASE MOUNT

    Sun 24 May 13:43:09 2015

    MMNL started with pid = 17, OS id = 16128

    Mount of redo thread 1, with mount id 3325657453

    Database mounted in exclusive Mode

    Disabled lost write protect

    Completed: ALTER DATABASE MOUNT

    Sun 24 May 13:43:23 2015

    change the database open

    Sun 24 May 13:43:23 2015

    LGWR: FROM PROCESS ARCH

    Sun 24 May 13:43:23 2015

    Arc0 started with pid = 21, OS id = 10084

    Arc0: Started archiving

    LGWR: FROM PROCESS ARCH COMPLETE

    ARC0: FROM PROCESS ARCH

    Sun 24 May 13:43:24 2015

    Arc1 started with pid = 22, OS id = 18400

    Sun 24 May 13:43:24 2015

    ARC2 started with pid = 23, OS id = 17280

    Arc1: Started archiving

    ARC2: Started archiving

    Arc1: become the "no FAL' ARCH

    Arc1: become the "no SRL" ARCH

    ARC2: Become the heartbeat ARCH

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-19809: limit exceeded for file recovery

    ORA-19804: cannot recover disk 44571136 bytes limit 8589934592 space

    ARCH: 19809 error creating archive log file to ' C:\ORACLE\ORADATA\FLASH_AREA\ATTNDPRD\ARCHIVELOG\2015_05_24\O1_MF_1_10343_%U_. ARC'

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_ora_10400.trc file:

    ORA-16038: log 2 # 10343 sequence can be archived

    ORA-19809: limit exceeded for file recovery

    ORA-00312: wire 2 1 online journal: ' D:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYD8B_. JOURNAL"

    ORA-00312: wire 2 1 online journal: ' C:\ORACLE\ORADATA\ATTNDPRD\ONLINELOG\O1_MF_2_8LRQYDF6_. JOURNAL"

    USER (ospid: 10400): put an end to litigation because of the error 16038

    Sun 24 May 13:43:24 2015

    ARC3 started with pid = 24, OS id = 2188

    Errors in the d:\app\administrator\diag\rdbms\attndprd\attndprd\trace\attndprd_arc2_17280.trc file:

    ORA-19815: WARNING: db_recovery_file_dest_size 8589934592 bytes is 100.00% used and has 0 bytes remaining available.

    ************************************************************************

    You have choice to free up space in the recovery area:

    1 consider changing STRATEGY OF RETENTION of RMAN. If you are using Data Guard

    then consider changing POLICY of DELETE ARCHIVELOG RMAN.

    2 back up files on a tertiary device such as a tape with RMAN

    SAFEGUARDING RECOVERY AREA command.

    3. Add space drive and increase the db_recovery_file_dest_size setting to

    reflect the new space.

    4 remove the unnecessary files using the RMAN DELETE command. If a service

    the system control has been used to remove the files, and then use the RMAN DUPLICATION and

    Commands DELETE has EXPIRED.

    ************************************************************************

    Instance of stopped by USER, pid = 10400

    --------------------------------------------------------------------------------------------------------------------------

    Regarding

    Ngoyi

    Hello

    Now it works very well... with following

    --------------------------------------------------

    using sqlplus

    • Startup mount
    • ALTER database noarchivelog;
    • ALTER database open;

    -------------------------------------------------------------------------------

    Concerning

    Ngoyi

    -------------------------------------------------

  • Error code ' 0x8007000d: the data is not valid "when you change the data of mp3 files. Or rather, not being able to change it at all. ID3 has not touched this issue.

    Since I upgraded to 7, I have a folder of mp3s which is not recognized by WMP at all. The data on the slopes (glancing through Explorer) are completely empty with the exception of the title track and the artist, but I can't change it. I have studied this problem to the best of my ability. Change my tags to 2.3 and the reorganization of all THE information on the media for these tracks has any changed their appearance or ease of use through the windows.

    I wiped the file information and manually entered again all this and it had no effect. Files to play very well, but neither WMP or ITunes recognizes more than a single use.

    The other thing I noticed is that the track time are not displayed through the browser or ID3.

    I'm PANICKED by my inability to even add the title of the album!

    Try this one: http://theWellTemperedComputer.com http://social.answers.microsoft.com/Forums/en-US/w7music/thread/027c07cf-db4b-45d5-afb4-85ce94eda4d0

  • Print templates do not work correctly when you change the orientation - prints come out with no dye if I closed and reopened LR

    I have two main models I use, their use for just the month without problem on a mac, you have a PC and installed CC in Lightroom, but he has decided that she wants to be stupid. This product only when I move a model oriented portrait in a landscape oriented one or vice versa. Sometimes I can fix it by exchanging between many different models and more and all of a sudden he finds himself again and I'm good to go. I * could * close and reopen Lightroom but it mucks up to printing, the model goes back to normal, but the next draw will be missing a color completely. Its a big waste of ink when a set of my inks costs $500. I'm on a PC and have the latest installed version of LR. I have attached the screencaps. Some would like TO help on this issue.both.jpg

    To anyone who has this problem, Adobe fixed it for me. When and only when the model is displayed correctly (usually on start-up LR) then right-click on this model and choose "Update with current settings". As the models were created on my mac for a reason any PC did not want to make them work properly. They will be working always once start LR so this should be an opportunity for you to correct!

  • Process page not throwing no data found error when you remove the item in a table

    Hi guys,.

    I'm trying to run a process page just before the process of MRU in tabular form and it is throwing an error no data found . Here is my code:
    BEGIN
         
         for i in 1..apex_application.g_f02.count LOOP     
              
              IF apex_application.g_f01(i) is not null THEN
                   
                   UPDATE STOCK
                        SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                   WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                   COMMIT;
                   
              END IF;
         END LOOP;
    END;
    F01 here is the checkbox column and the if statement is the cause of the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.

    When I click on a checkbox, and hit the Remove button what fires off times this process and then the MRU, I get the error not found data .

    Would appreciate it if someone could shed some light on this. Thank you very much.

    Published by: taepodong on July 1, 2012 07:54

    Hello

    >
    I'm trying to run a process page just before the process of MRU in tabular form and he throws no data were found error. Here is my code:

    BEGIN
    
         for i in 1..apex_application.g_f02.count LOOP     
    
              IF apex_application.g_f01(i) is not null THEN
    
                   UPDATE STOCK
                        SET PRODUCT_QUANTITY = PRODUCT_QUANTITY+apex_application.g_f08(i)
                   WHERE site_id = :P21_SITE_ID and product_id = apex_application.g_f02(i);
                   COMMIT;
    
              END IF;
         END LOOP;
    END;
    

    Here f01 is the column of the box and the if statement is causing the problem because if I get rid of the update statement (leaving just the commit) then it still throws the error.

    When I click on a checkbox and click on Remove button that triggers both this process and then MRU, I get the no found error of data.
    >

    You iterate over the f02 and seeking f01 not null. It's the misuse of the checkbox element. Please see these links. in particular the examples of process OnSubmit.
    http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_item.htm#CHDDCHAF
    http://docs.Oracle.com/CD/E23903_01/doc/doc.41/e21676/apex_app.htm#AEAPI215

    Kind regards

    PS: That's what you need to understand
    >
    Note that the boxes displayed by using APEX_ITEM. CHECK box will only contain values in the APEX_APPLICATION tables for those lines that are checked. Unlike other elements (TEXT, TEXTAREA, and DATE_POPUP) that can contain an entry in the corresponding table of APEX_APPLICATION for all submitted ranks, a checkbox will be an entry in the APEX_APPLICATION table if this option is selected.
    >

    Published by: Dominique July 2, 2012 09:44

Maybe you are looking for

  • HP pavilion g6: WiFi HP Pavilion G6 problem

    Hai. My HP Pc wifi does work not after I've upgraded 10 windlow WiFi (Turned off) State Please give me the solution how to fix... Thank you

  • How to turn off the sound recording on a Camileo H20?

    I just got a new VCR Camileo H20. Directly from the box. I use it for video road races to complement the photographs that I take with my Nikon digital camera. I am really satisfied with the short video clips that I record, whether they are clear and

  • Equium A100: Cannot open 'Accessibility' - complete common Module error

    Toshiba assist on my Toshiba Satellite A100 laptop, I press the accessibility of the icon. He then came with the error 'Common Module complete'. Help would be appricitaed.

  • Windows Update_0000066A error

    Windows said there was a significant update to install. I pressed 'install' and each time (4 times) error code received Windows Update_0000066A. How can I fix it so it will install?

  • Cleaning of the printheads to 6980 in windows 7?

    It's maddening!  I can't believe that there is no work around for the Toolbox missing in windows 7.  I NEED to clean the print heads and can't understand how.  I tried to do it manually according to instructions from HP (keep the button / stop, press