Mouse freezes on slow computer-xtra when the computer on the floor is in use, what is interference

Similar Questions

• Satellite Pro M70 freezes everytime when the USB port is used

  Satellite Pro M70 (SPM76) crashes every time when the USB port is used.
  The mouse works, but external HD/Extarnal card sound/Memory stick causing the laptop to freeze. All the drivers are installed right, they are the most recent and have no trouble with other users.

  The devices are all compatible. Service pack 2 is installed, and all the hardware drivers on the toshiba have been updated... again, same problem.
  The toshiba is about 2 months old and have had this problem since I got it. First I thought it was the drvers, but I cleared of all (?) other options but the USB ports.

  Hello

  Believe me, that's not easy to say what the problem may be. It is important to see if the problem occurs because of hardware or software may be. I recommend you to backup all your data and reinstall the unit using rescue media. On this way the unit will be factory settings and will be clean preinstalled. Test your USB devices and see what happens.

  Try to use some standard like USB stick or external HARD disk parts, because in this case, you must not install any drivers please. If you use other devices like USB webcam with own software and drivers, it is possible that something goes wrong, but what. On this path, it is not possible to say.

• Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Th

  Whenever I open a creative cloud application adobe (such as Photoshop, Flash, AfterEffects etc.) it takes so long to open, and then after a few seconds, it freezes and I have to close the application ("force quit"). What happens here? Thank you

  If it's all programs of cc,

  Uninstall (properly using the uninstall programs) all cc

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud and use the app to install your programs of cc.

  If it's only some programs of cc who are broken, reset their preferences-

  Acrobat: https://forums.adobe.com/thread/1595848?start=0&tstart=0

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  hearing: https://forums.adobe.com/thread/1079494

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InCopy: https://forums.adobe.com/thread/526990

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• When I insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).

  I use outlook express 6 on windows xp pro.

  When I Insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).
  I did use the option of fixing , I used to Insert.  The reverse also occurs.  When someone using OE sends me an email with
  a peak inside the body of the email, it appears in the box and not in the body of the email. This happens only when they concern the
  my program.  Others using OE does this experience between them.

  My mail sending format is HTML and in its settings, I checked "send pictures with messages. In addition, in the tools of internet explorer, advanced, multimedia.
  I 'send photos' checked also, in the email window, under 'format', ' Rich Text (HTML) "checked.

  I have recently reinstalled cleanly win xp to address a system idle in general.  All updates are in place and tested it with antivirus and anti-malware programs.

  That is what it is?

  [Transferred from Internet Explorer]

  Original title: outlook express

  Tools | Options | Read. Read all messages in plain text it is checked? This it will make become an attachment.

• When the memory coherence is full, what consistency do?

  Dear Expert:
  
  I have a problem in customer, they ask:
  When the memory coherence is full, what consistency do?
  He takes care to write data or the entry on the disk?
  If it can be supported, how can I config?
  
  
  I read some documents, but I find things like this:
  < local plan >
  LRU <-eviction strategy > < / eviction strategy >
  < high-units > 1000 < / high units >
  < expiry delay > 1 h < / timeout >
  < / local plan >
  
  but I can not find somethings on the coherence jvm memory usage?
  
  
  Thanks in advance.

  Hello

  There is no magic solution to stop short of memory coherence. A cluster of coherence is a limited resource and has a finite size and you need to do some sort of exercise as you would with something like a database capacity planning system. You wouldn't continue to put data in a database without him running out of resources, and the same is true with consistency.

  Yes, there are things like expiry which allows you to limit the size of the caches, but like the previous poster said, when the limit is reached data will be evicted from memory. Unless you have some form of persistent storage for these data using something like a dumps, while the data is lost.

  You can set the overflow to disk so that when a size the cache limit is reached as described here http://download.oracle.com/docs/cd/E15357_01/coh.360/e15723/cache_examples.htm#BACCHCIA

  The problem with the ousting of size based and exceeded the size in function, is that the limit is per cache per JVM. This means that for a system with several caches and services that you usually end up expulsion or overflow to disk for a cache that reached its limit when there still may be a lot of memory left that you need to allow for each cache being full in your design.

  I saw people in the past are trying to find different ways of ousting of data based on the used JVM heap, but they never seem to be satisfactory. If you've seen a chart of the JVM heap usage you will see that it is usually a model of Sawtooth constantly up and down. A JVM could hit 90% use but still have a lot of real space because he had not recently made a GC. If you have a schema data eveicted when the reached JVM say 90% you could start to expel the data too early. Also, it's probably enough data in a cluster push possile faster than data can be evicted if you might still run out of memory. A cluster of coherence consists of multiple JVM processes and if you get skewed the disaggregation of data or you caching of objects of different sizes, it is quite possible to get Java virtual machines in the cluster running off lot well before others. The project I'm working on that, we had a situation where we had a few nodes in the cluster using more than 300 MB of heap more than the other nodes in the cluster - is quite a big difference when the total heap was only 2.5 GB.

  As I said the best thing to do is good capacity planning. Work out how much you need to organize and work on the size of your cluster based on that data. You probably still have some sort of eviction of the data well. The system on which I work at eviction of the moment according to some data and custom eviction of other data based on business rules. Custom eviction is juats another process that verifies the data and expels the relevant stuff.

  JK

• How to control automatic shutdown when the battery is discharged using Windows

  The laptop stops right in the Middle something without notice.

  Even after that I formatted the system, he still stops automatically when the battery is low, without advising me of either the low battery status or the judgment.

  I don't think that the cause of the problem is the power management because it is set to balanced.

  How can I control when the pc stops?

  Hello

  Usually, you can change these settings within the Windows power management.
  Using Win 7 or Win 8/8.1?

  Here is the Nice technical document about the features of Windows 7 power management
  http://APS2.toshiba-tro.de/KB0/HTD12017W0001R01.htm

  Check the last option called: battery.
  It provides many useful features such as low battery, critical battery level, low battery action or critical battery action

• Out of the blow of sleep when the HARD drive password used on Portege R700

  Hello
  I just got a DLI R700 with Win 7 Pro 64-bit
  I have a very annoying problem because it must be plus 1 minute to accept the password after the resumption of the mode standby. It would be faster out of the hibernation!
  So he wakes up from his sleep in a second, then you can enter the password without any problem but you just can't click on the arrow or press on enter up to what more than one minute. Similarly, it will accept even fingerprints directly at the exit (you get the green check mark) after wake but then expects just over one minute to move in the opening session on the desktop screen.

  Through a process of account, I worked on what was going on...
  Only, it crashes when you have the password on resume from sleep. CV password sleep turn out and he throws back in Office windows in seconds of wake
  This does not happen to resume from hibernation or reboot - scan of fingerprints or password is entered, then goes right into the office in a few seconds
  I started uninstalling software fingerpint, vap, power, toshiba - nothing always security management the same. Then I realized the password HARD drive - which was defined using the security of Toshiba and deleted using the same, has been still enabled in the bios. I have this off and everything works fine. I reinstalled the vap, power management and fingerprint software and everything is always very well, so it was defnitely the HARD drive password.
  Now it's really fake I want to have a RESUME from sleep password and HDD password protection - I have to choose between one or the other, unless I want to wait more than a minute each time he wakes from sleep which is a real pain! So it's clearly a bug in HARD drive password settings, probably in the bios? I have the latest BIOS installed.
  Any ideas on how to get this sort?

  Does anyone else have this problem with be either 32-bit or 64-bit. Or everyone doesn't have this problem, that is to say that they hear HARD drive password AND he wakes with password ok in a few seconds?
  Thank you

  Post edited by: bullerd

  Hey Buddy,

  It's really hard to say something about what I can only say that I can t noticed this problem on my Windows installation.

  By the way: you are using the version Windows from Toshiba or your own installation of Windows?

  Theoretically, it could be a problem to install Windows or disc itself are you able to test another installation of HARD drive or windows that you can make sure it is not a software problem?

• Qosmio X 500-058: no recovery after plugging screen down when the HDMI port is used

  When I connect my new Qosimo X 500 - 058 to monitor external (with the help of an HDMI to DVI converter cable), everything works well until the power of Windows application options off the monitor.

  Once this has happened, the screens don't wake up and stays black.
  The PC were not crushed, and if you press Ctrl-Alt-Delete, you get the normal menu options.

  But if you press Cancel, or lock, and then enter the password, the screens go black again.
  This problem does not occur if I remove the HDMI cable and use only the laptop screen.

  I found that if you select the option change user after pressing Ctrl-Alt-Del monitors come back to life after a lot of glitter, if at least I don't have to re-boot each time. Does anyone have any suggestions on how I trouble shoot this?

  Cheers, Alun

  Hello alum

  Have never heard about this but anything is possible. It will be interesting to see if the same problem persists without DVI converter cable.

  When this happens can you use FN + F5 key combination to turn on the transparent back of laptop?

• When the CBO would not use bitmap indexes available?

  I have a large data warehouse table in a star schema classic, with an index number of bitmap for the dimension tables. When you run queries that contain parameters for multiple indexes, the CBO will only use generally one or rarely two bitmap index.

  It seems to me that if the indexes are valid, statistics, the values of the parameters are present, etc and the CBO uses a bitmap index in an AND condition, he would like to use all those she could.

  there all the parameters that affect or bitmap how indexes him CBO will use? I'm looking for some advice on what to look for or research.

  Database is 11.2.0.3 base with no patch.

  Thanks in advance,

  Sean

  rp0428 - who has been deliberate because my question is not "how to solve this problem", that's exactly what I pointed out in my post. Just trying to see if there are all the controls to weight the decision-making community organizations in this area.

  OK - then let me simply state it.

  No - there are NO these parameters. But most of the posters are not really looking for a simple yes/no answer even if of many word of questions like that.

  See my response as of March 18, 2012 19:21 in this thread: https://community.oracle.com/message/10219613?

  Here I provide a simple table with SIX bitmap index, a query that uses predicates that combine values since the execution plan and the six columns indicating the different INDEX of BITMAP UNIQUE BITMAP, BITMAP or operations and BITMAP CONVERSION to ROWID.

  I won't repeat everything here, but this example should show you that Oracle will limit itself the way you suggest.

• Legend when the "back" button is used

  Hello

  I have a problem, I opened a modal of legend, up here, everything is beautiful. But when the user types the button "return" (the return of the Android device button) the application for return should another view (OK), but the legend is on the screen.

  Any suggestions?

  I found a solution:

  1 earphone is not the component itself, but systemManager.stage

  2 listening test phase of capture as systemManager.stage.addEventListener (KeyboardEvent.KEY_DOWN, backKeyHandler, true)

  3. in the handler if (e.keyCode == Keyboard.BACK) e.preventDefault ();

  Ty

• How to play a sound through computer speakers when the HDMI cable is used as I can't get the audio content

  I have a desktop monitor and an Alienware Alpha I bought recently, which of course is not a speaker. I use a HDMI cable to get the video of the Alpha on the screen, but when I plug the HDMI on my monitor I can not any audio to the fate of the computer speakers. In the Alpha settings, when I try to switch the audio in HDMI mode, it is said that the HDMI is not connected or incorrectly connected. Any help is appreciated. Thank you.

  I'm not quite familiar with the Alpha console, so I can only suggest to visit their support page where you can chat with an expert.

  I hope that you can solve your problem.

• CHKDSK freezes, very slow computer

  My computer runs very slowly from the windows of the last update. Many messages "not responding". Explorer, and pretty much any program I try to open freezes. The suggested problem solver running CHKDSK to search for disk errors.  He gets in what concerns the step 4 of 5 and 16766 330800 file it seems to freeze. The first time that I left it for more than 2 hours then turn it off. The next time I let him run and he just seemed to give place and loaded Windows. Any ideas? How long should I wait?

  My computer runs very slowly from the windows of the last update. Many messages "not responding". Explorer, and pretty much any program I try to open freezes. The suggested problem solver running CHKDSK to search for disk errors.  He gets in what concerns the step 4 of 5 and 16766 330800 file it seems to freeze. The first time that I left it for more than 2 hours then turn it off. The next time I let him run and he just seemed to give place and loaded Windows. Any ideas? How long should I wait?

  Looks like a bad drive.

  I backup your stuff and then try a system restore to see if updates uninstall helps you at all.

• LR CC 2015.3 version still crashes when the GPU acceleration is used!

  Today, I had installed Version 2015.3 and was hopeful that all the bugs have been fixed and all the problems of recent months have disappeared.

  Wishful thinking? When I turn on the GPU acceleration, it freezes again! When I disable it, everything seems to work well.

  I use a series of 380 MSI AMD Radeon R9 with 4 GB of GDDR5 memory on a Windows 7 computer.

  There is other users with similar experiences?

  Hi Suneye,

  With the new update of Lightroom, the feature GPU causing Lightroom to freeze is always a problem.

  Please read the article for a list of the Bug is fixed in the new update: Lightroom CC 2015.3 / 6.3 now available

  Kind regards

  Tanuj

• Impossible to resume when the screensaver is active, using TrackPoint or TouchPad

  I can't take back Saver screen, or using TrackPoint, TouchPad, no UltraNav button as an external mouse BT.

  The one and the only way uses the Ctrl + Alt + Delete, to resume.

  How can I solve this problem?

  Kind regards

  Harel

  Hello

  Maybe it s a problem with BOINC, if the problem won´t occur with the windows screen saver.

  Maybe there is an option in the BOINC preferences or somewhat, which may, in the end

  sreensaver, when you use your mouse and perhaps other BOINC users have had this problem also.

• Loss of Adobe Enterprise CC license when the current CC user uses the login

  We have CC Adobe Enterprise at our University. Recently, we have been having problems with people getting the error 'you already 2 registered computers in this account'. It happens on Mac and Windows. It seems that sometimes, when an individual who already has a personal subscription Adobe CC connects to the Adobe Cloud application to manage their fonts/etc, it causes the computer to lose our license from the company. Once we re-run the script license its fine for a while.

  Anyone had this problem before?

  Please contact support via the Support from Adobe to get this addressed.

  Thank you

  Stéphane