Mouse Microsoft constantly double click on its ' own

Similar Questions

• Mouse problems. Double click to open things does not. Click to create a link in IE also does not work.

  When something can be simple click it to open it, it works. If there must be double clicked and then it doesn't. Also, the links in Internet Explorer work by clicking with the mouse. Am so frustrated. Tried every difficulty that I could find on the web & does not. Use a different mouse, reinstalled the drivers, nothing. Switched left button to be single click to open in settings - did not work. Have to use Tab to navigate something, so it is highlighted. Press "enter" and then it opens if this is the main screen, in a folder or in IE. Help... Please! Thank you.

  Leiden,

  In my view, there was a point he was working again properly. I suggest to do a System Restore and see if it helps
  See you soon ~!

• Mouse enter becomes double-click on touch device (iPad)!

  Hi all

  I created an interactive site through edge animate.

  I use the mouse in order to show the effects of mouse.

  When I view the site on my iPad (and other Apple iOS Tablet/mobile devices) - this enter/mouseover effects becomes a click (or press start etc.).

  This means that each button requires a "double tap" / "double click" in order to activate this button.

  I have searched high and low for a solution for this but couldn't find anything.

  Can someone please?

  Desired effect:

  Code or solution that will eliminate the effect 'double click' my site on touch devices.

  Thank you!

  Jason

  I managed to work on a fix for this.

  Problem = double tap to get a click event for the button to work on the Apple iPad or iPhone.

  -He would record a mouse enter / mouse move events as an event of button on iOs

  Solution = # add touch version of modernizer

  = # Add this to your creation of scene complete - if (Modernizr.touch) {console.log ("Touch Me!")  } else {console.log ("can't touch this!")}

• Cursor is auto-ancrage at a predetermined location and clicking on its own.

  I am currently using a computer HP Envy with a Logitech wireless mouse. Recently, it has been a problem that my computer will suddenly look auto-clin the cursor in the same location and click. This happens randomly and became irritating because I use my computer constantly to type and play games and this can cause a large number of unintended results.

  Thanks for the help, it was actually the sensitivity of the touch screen, there was a piece of rubber or something that was be seen for some reason any. It fixed itself, once I cleaned the surface with a Kimwipe.

• Double-click on the graph in the map does not work

  Hello
  I had created an application where the user can click on the map and a marker will be created and it stores values x y and stored in the database and the user can also drag the marker and place it in the appropriate position and after the user drag and drop the marker we have a "confirm" to send the values of y from x to the database. I need to remove that confirm the button and replace only with double click where user double clicks on the marker settings must pass.
  
  To drag the marker, I use the mousedown event, but when I add the doubleclick event his does not work
  
  gr.doubleClickEnabled = true;
  gr.addEventListener (MouseEvent.DOUBLE_CLICK, registerComplaint);
  gr.addEventListener (MouseEvent.MOUSE_DOWN, mousedownGraphic);
  
  even when I comment on the mouse to the bottom of the double click event on the graphic marker does not work.
  
  Help me in this task I need to do urgently.
  
  Concerning
  Arun Mohan

  While I can't possibly guess the cause of your problem, there is an easy solution for this.

  ...
  // record the time for the last mouse down
  private var _lastMouseDownTime:uint = new Date().time;
  // how fast the second mouse down needs to be to qualify for double click
  private var _doubleClickThreshold:uint = 500;
  ...
  // traces mouse down and double click
  private function mouseDown(e:MouseEvent):void {
              trace("mousedown");
              var mouseDownTime:uint = new Date().time;
              if(mouseDownTime - _lastMouseDownTime <= _doubleClickThreshold){
                  trace("doubleclick");
              }
              _lastMouseDownTime = mouseDownTime;
  }
  

• How to open each file version of CS in its own version of the program when double-clicked?

  Hi all

  It is on the coexistence of Indesign CS4 and CS5.

  In my business: I work with Indesign CS4, but a colleague test CS5 in real works to day to day, and every day I met CS5 files I have to correct, so I also installed CS5. Now, when I start it in the morning, and no program InDesign is open again, whenever I double-click an Indesign file, the system will open with CS5, no matter whether the file is CS4 or CS5. I find it quite annoying, of course. I want that each version of file to open immediately in its own version of the program. I think that what is happening to a lot of people, but I find the question in the forums and haven't found anything.

  Of course I use roundabouts as have my colleague write '_CS5' at the end of each file, put CS4 in my startup items (so that once the program is open, the question works on the other hand, and any file Indesign just opens in CS4 when double-clicked...).

  In addition, all Indesign files appear on the desktop in the form of files CS5

  I'd appreciate a lot of ideas on the subject, thanks!

  soxy Rorohiko.com...

• funny behaving USB mouse: doing double click even when I press only once

  my mouse behaves funny recently: pretty much whenever I do a click, the result is a double click. When I press for one second and then release the mouse button, I often still get (not) the disiredc simple click... it's on windows, all programs.

  Windows XP, SP3, all installed updates
  Mouse USB (no name)
  my PC has 4 ports USB 1.1 on the integrated controller, I installed a USB 2 control with still 4 ports a year.

  I tried different settings of the mouse (click on the gear, etc.): same problem
  I plugged another mouse (newly purchased): same problem
  I plugged the mouse in all USB ports: same problem
  I plugged the mouse via a USB/PS-2 PS/2 adapter: same problem
  I started a Linux system: same problem
  My scanner (USB; Canon) begins behaving irregulars as weel: during a scan, it constantly stops and then restarts...

  Should I assume that some conflicts between the two USB adapters, as shown in the eroor with a different OS as well?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message when you use the Scanner?

  Method 1:

  See the article and try to run the fix it:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  I suggest you to update mouse drivers and scan and check if it helps:

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

  Method 3:

  I suggest you to disable and re-enable the USB controllers:

  a. click Startand then click run.

  b. type devmgmt.msc, and then click OK. Device Manager opens.

  c. expand Bus USB controllers.
  Note: You need to scroll the list to find this point.

  d. right-click the first USB controller under USB Bus controllersand then click Uninstall to remove it.

  e. Repeat step 4 for each USB controller is listed under Bus USB controllers.

  Note: restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

• How can I set the pointer or mouse to do only the things when I double click?

  Original title: my highlites pointer without clicking, opening up much more often.  How can I set the pointer or mouse to do only the things when I double click?

  How can I configure my pointer/mouse to do only the things when I double click?  Currently, it has a mind of its own, putting highlight and things that I don't want to open.

  Hi George,.

  Try the following steps to disable the functionality of hover and check if it helps.
  a. Click Start and select Control Panel
  b. click on ease of access and select make the mouse easier to use
  c. If there is a check box for activate a window by hovering over it with the mouse uncheck it.

  You can also read the following article and check.

  Change the settings of the mouse

• Can I put a double click my mouse from Apple?

  Over the years, I've used many third-party mouse, but now in part because of problems of drivers with this mouse, I would give the Apple mouse that I got with my newish iMac to try. But I'm really used to having the number of right mouse button double click. Double click clicking once with my middle finger greatly relieves the pressure on my arthritic fingers. Is there a way to set the secondary click as a double click on the mouse from Apple? (I'm used to use Ctrl-click to join the context menus, so I do not have the usual setting right click on the mouse).

  Thank you

  Rob

  You can take a look at BetterTouchTool. If you are using a wired Apple mouse you can set, for example, Middle-click as a double click. To do this, a whole lot more of course. Right now it's still free, but its change to a sort of pay what you want plan. I did not read all of this.

  There is undoubtedly a way to write a small script you could start with double click of the mouse, but it's something that I personally never did.

• Wireless mouse left button does not open programs when double-clicked.

  I have a new Office Tips multimedia - microsoft wireless keyboard and mouse.  Sometimes the icons on the desktop when you click the left button double does not open the program.  And there are times when the program is opened, you can use the left button to navaigate within the program.  Why is this happening?  For the desktop icons, it happens more often in Internet Explorer... Help me please!

  Hi amwash55,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  Check and make sure that the mouse settings are correctly set.

  Set the double-click of the mouse speed

  http://www.Microsoft.com/enable/training/WindowsXP/doubleclickspeed.aspx

  If the mouse settings are correct, then make sure that you have installed the latest version of the drivers for the device.

  http://www.Microsoft.com/hardware/downloads/default.mspx

• How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  How can I configure my computer to the simple click with the mouse to double-click to open an item on the desktop instead

  Hi placebow,

  Open the Options folder by clicking the Start button, clicking Control Panel, appearance and personalization, and then clicking Folder Options. On the general tab, click single-click to open an item. (To return to the standard click, click double-click to open an item.)

  The setting applies not only at the office, but also in other areas of the shell.
  Ramesh Srinivasan, Microsoft MVP [Windows Desktop Experience]

• How can I change my mouse to the simple double click click?

  How can I get my mouse to single click instead of double-click? using windows vista

  Control Panel > Folder Options > general tab > select single click to open the Microsoft® Security MVP, 2004-2010

• How can I set one of the buttons on MS Explorer Touch Mouse double-click?

  I have a MS Mouse older 5000 and there is an option to set one of the two buttons on the side of double click.  I like this feature but can't find a way to do it on the Explorer Touch Mouse.

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  From the description of the problem, want to set buttons double click of the mouse. I'll be happy to help you on the issue.

  Let us try the steps from the following link:

  Change the mouse settings (to change the operation of the mouse buttons)
  http://Windows.Microsoft.com/en-us/Windows7/change-mouse-settings

  I hope this helps! Let us know if you have problems with Windows in the future.

• I have a problem with scrolling of mouse working on its own.

  Original title: in Windows 7, how can I stop popups, scrolling & other activities when I do click on the mouse.

  I recently moved from XP if it is not a problem.

  (1) while I read a website or a Word doc & move the cursor out of the way, it opens up the popups for no matter what cursor passes over, distract from what I'm trying to do.

  (2) in Word, when I try to highlight something to change or clear, somehow the cursor goes into scrolling on its own & does not allow me to highlight what I want.

  Basically, I would turn the mouse in what it was on XP because the "intuitive" nonsense is not help. If I want to see the popup, I can always right click. I have need it automatically sends me garbage.

  Y at - it a setting that I have not been able to find? I was well as the mouse settings and tried various combinations, but this feels like a more basic configuration question. If so, how should I do?

  Thank you

  Earl

  Thanks for your help with this.

  For some reason, the mouse was activating stuff (pop ups, etc.) when I checked precisely not to do.

  I tried what you suggested. What seems to have worked replaces the mouse. I had an arrangement to use a single set of keyboard/monitor/mouse with 3 computers, requiring the use of a mouse with the old pins instead of USB. I'm trying to do with 2 units of mouse and it seems fine. Don't know why, but I'm satisfied.

  Thanks again,

  Earl

• Wireless 5000 mouse erratic acts floats on its own

  wireless mouse behaves erratically, disobeys all the time but sometimes floats on its own when you click

  Have you tried to replace the battery?