Mouse not working not properly

Similar Questions

• mouse not working not properly. It jumps all over the screen by itself

  Since the upgrade to the latest version of El Capitan, I have a problem with my mouse and my Trackpad 2. The trackpad does not at all even though it is connected and bluetooth works. The mouse jumps around on the screen and it is difficult to land on the site I want.

  If the mouse you mention is a Magic Mouse 1, which is probably the reason why.   Magic mouse 1 works up to a point, but you need Magic Mouse 2 for maximum effect, once you have upgraded to El Capitan.  I would add, with new OS on the horizon (Sierra), your need for MM2 becomes even more pressing.

• keyboard and mouse not working not properly after installing Windows 8.1

  I was forced to upgrade my computer to Windows 8.1. My keyboard worked fine until the system is restarted. Numbers on the keyboard stopped typing and letters were capitalized when the caps lock was turned off and the numbers at the top will only type the symbol above the numbers.

  I looked at this problem and it seems that I have to enter in the settings of the UEFI and disable the Intel XHCI mode. When I enter the settings of UEFI, I can't make any selection in the start menu. My keyboard and mouse stop working.

  Any suggestions?

  Thanks for posting a reply. Fortunately, I didn't have to try your solution because the computer solve itself.

• iPhone upgrade of the navigation software now works not properly

  iPhone 5

  New IOS software updated and now the navigation screen not working not properly

  is your site on?

• Keyboard and mouse not working not

  Keyboard and mouse not working not
  I tried to use the method of matching and again, it won't work. What should I do? Devastated and frustrated

  The same problem. Qosmio all in one PC. Also tried the instructions for pairing and the light indicates successful pairing but mouse and keyboard still does not. Can someone help please...

• Satellite Pro U200: VGA output works not properly when the AC adapter / CC has been connected

  Hello

  I have a problem with vga output. When I'm working on the battery and connect my laptop to external monitor is ok, but when I connect adapter then start waving also bluetooth and wlan is not working properly. In other cases when I disconnect laptop battery and connect the AC adapter it works correctly.

  Thanks in advance

  Hello

  Can you please describe more precisely what is happening here? Does not properly is a rather general statement.

• Satellite C660D - 19 X - touch pad or external mouse not working not

  Good evening

  Touchpad of my neighbour does not work.
  She tried an external mouse and I tried a different external mouse.
  No luck with either

  Any ideas?
  We tried it in safe mode too and no luck.
  We tried the system restore, but no luck.

  Thanks in advance.

  > We tried the system restore but no luck either.

  By restoring the system you mean the recovery procedure?
  Have you used the Toshiba or Toshiba HDD recovery recovery disk to put the laptop back to factory settings?

  > She tried an external mouse and I tried a different external mouse.
  I m wondering about this question, I assume that you have connected a USB mouse to this laptop, and you cannot move the cursor by using these external USB mouse.
  Is this right?

  In my opinion, even if the touchpad wouldn't work or would be disabled, the external USB mouse should work because both devices are unrelated to each other.

  Your comments would be greatly appreciated

• Touch pad mouse not working not - seeing yellow

  My touchpad mouse not working anymore, and a yellow light appeared. What is happening? What can I do to activate it?

  HP Probook 6460 b, CNU1363S3L, Prosessor Intel (R) Core (TM) processor i5 - 2410 M 2.30 GHz

  Hello

  You're welcome and good to hear it works

  All the best,

  DP - K

• wireless mouse not working not

  I just bought a laptop of Hp Envy PC m6-n168ca m6 to replace my last Envy with a damaged operating system. I have a Microsoft 4000 wireless mobile mouse to use with it and I plugged it in the usb connector and installed automatically and apparently successfully. Unfortunately, the mouse is not recognized on the screen. It works on my other laptop so I know it isn't the mouse. This is my first laptop touchscreen but I wonder if it has something to do with it? The function of mouse trackpad works fine but I need to be able to use the touch pad and mouse. Is this possible? Is there something I need to enable/disable or turn off? I searched through all the help and control settings and can not find any useful information. just how to change settings click of mouse and stuff. Can someone help me with this?

  Thank you

  Britt

  @brittmeekison ,

  Hello and thanks for the display on the HP support forums.  Here are some links that can help you with your touchpad and mouse problem.

  Use and troubleshooting of the TouchPad and ClickPad (Windows 8)

  Troubleshooting of touch screen in Windows 8

  Here is the link to your drivers for your laptop as well.  When the removal and replacement of the drivers.  Make the removal of the drivers in safe mode.

  PC drivers for laptop HP ENVY m6-n168ca

  Safe mode of Windows 8

  If please after back and let me know how things are going with this.

  Thanks again for posting and have a great day.

• Bluetooth mouse not working from time to time (X 220)

  Bluetooth (Microsoft Bluetooth Notebook Mouse 5000) from time to time my mouse stops working.

  I have to either move the mouse around a lot or cycle power to operate again.

  The problem is not with the mouse, which works fine with other computers.

  JNavas wrote:

  Bluetooth (Microsoft Bluetooth Notebook Mouse 5000) from time to time my mouse stops working.

  I have to either move the mouse around a lot or cycle power to operate again.

  The problem is not with the mouse, which works fine with other computers.

  Problem solved by acontrol "Allow the computer to turn off this device to save power" in Device Manager > Bluetooth Radios > ThinkPad Bluetooth 3.0 > properties > power management.

• Wireless mouse not working not when the games starts

  I have a logitech LX6 wireless mouse and keyboard. They stand work very well in the main menu of Windows 7 and surf the Internet, how ever when I start a game (I tried WoW and SUP Commander) the mouse stoped working and everything I could do on the keyboard was out esc. Any ideas.

  It's strange.  You have another mouse and recently pass to it?  Or have you had it for awhile and the mouse has started to act like that?

  I could certainly go to the Web from Logitech site and see if there are any updated drivers for your mouse.  Also, make sure that you don't have another mouse plugged in at the same time playing these games.  I guess you do not, but sometimes a game will remember your previous settings of the mouse, and when you go play, he thinks that the mouse is always there.  So, you will need to uninstall and reinstall your games.  However, I would do that as a last resort.  If your mouse is new, you may contact support of Logitech to see if they know work around or solution.

• Video error for a single show - "video error: the files needed to display video are not installed or not working not properly.

  I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »

  Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D 920 processor and more than 230 GB of free hard disk space.

  The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)

  Maybe my computer is a militant fan of Star Wars?

  Windows XP Media Center 2005

  If this only happens in a show on a channel and passes every day but others
  shows on the same channel are watchable/recordable, it is possible that a copy
  never flag is set that is manifested by the video display
  error message.
   
  I would recommend that you post this topic on the forums of http://thegreenbutton.com .
   
  Tuesday, July 27, 2010, 00:54:06 + 0000, Pseudo Witty says:
   
  >
  >
  > I get a "video error: files needed to display video are not installed or not working not properly."  Please restart Media Center and / or restart the computer. »
  >
  > Windows XP MCE 2005 on a PC HP Media Center m750n with 2 GB of RAM, Intel Pentium D Processor 920 and more than 230 GB of free hard disk space.
  >
  > The strange thing is, it only happens for a show, "Star Trek: The Next Generation" at 07:00 on channel 55 Houston.  Sometimes it is live or recorded.  Shown immediately before and immediately after about 55 works fine, as does anything on any other channel. (Although if I leave the video error for more than a few seconds, then I get an error of the tuner on the other channels until I quit Media Center and bring backup.)
  >
  > Maybe my computer is a militant fan of Star Wars?
  >
  > Windows XP Media Center 2005
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 Win Server

  Deskjet 6122 driver will not properly work on a HP Proliant ML 150 6 server running Window server 2003 Enterprise edition SP2. I have loaded driver 990c and it works, but the side two the 6122 print function will not work with 990c. Is there any solution for this?

  I'm afraid that there is no specific driver for this OS. The 990c driver will be the only option to get to work. I'm sorry.

• Installation of Windows 7 64-bit, keyboard & mouse not working not

  Hello

  I am trying to install Windows 7 64 bit and my keyboard & mouse stopped working so I can't complete installation. I looked online for a fix and tried to then plug in USB 2 ports, and they still do not work. I found a PS/2 keyboard lying around as it was referred to as a hotfix, however, that the mobo is not any PS/2 ports that will not work. Can you please let me know if you have a work around this? Of course, the Windows 7 installation disc doesn't have the correct drivers for this motherboard?

  I've contacted ASROCK support for my mobo and they have no idea?

  Here is my config of systems

  CPU: i5-4570 3.2 GHz

  Memory: 8 GB
  Video card: on board

  HARD DRIVE:, SATA
  CD-ROM:, SATA

  OS: Windows 7 32-bit

  Can someone please help?

  Soon Tom

  • Restart your computer (click Start > Shut Down > restart)
  • Enter the configuration of the system to BIOS to start Windows.
  • In the BIOS, look for the USB Legacy Support parameter of. ...
  • Select USB Legacy Support and change the setting to "Enabled". ...
  • Save the settings and exit the BIOS.

• Microsoft Arc Touch mouse Bluetooth works is not on my notebook of notes Windows 7 Ultimate edition and windows desktop 8!

  Hello world

  I just bought Microsoft Arc Touch Mouse Bluetooth to use it on my laptop Vaio PC Windows 7 Ultimate. My PC mouse detected and installed in the PC devices and printers folder. But that's all. Regardless of what I do on the mouse not recognized by PC (no cursor movement!). There are a number of support in the manual, but they say different division of Microsoft is nothing to do with the mouse! There is a web page address in the manual to download the drivers, but there are no drivers provided on this page. I tested on my office windows 8.1 also but get the same result!

  I buy an incompatible mouse to my PC? No where on the box of the product or in the manual of any mention of any specific PC it is exclusively designed for!

  Can we thru' shed some light on this? so that I can return it to the store if necessary?

  Thanks in advance.

  Hello

  Thanks for posting your query in Microsoft Community.

  From the description, I understand that the Microsoft Arc Touch Bluetooth mouse does not work on windows and Windows 7 Ultimate notebook office 8.1.

  Let me tell you that Microsoft Arc Touch Bluetooth Mouse is compatible with these operating systems: Windows, Windows 8, Windows RT 8.1 and Windows RT 8.1
  So it does not work with windows 7. As the problem persists even after logging in to windows 8.1, the equipment may be defective. I suggest you contact Microsoft support hardware for more help.

  In the meantime, you can try the following methods and check.

  Method 1: Install the implementation for the Arc Touch Bluetooth mouse.
  Please see the link below:
  http://www.Microsoft.com/hardware/en-us/d/arc-touch-Bluetooth-mouse

  Method 2: Troubleshooting of hardware and devices
  The hardware and devices troubleshooter can detect and correct errors and incorrect settings in devices. You can view these steps to run this utility for troubleshooting:
  (a) press the Windows key + X, select Control Panel
  (b) change the display option in the top right large icons
  (c) click on troubleshooting and click the view all option on the left panel
  (d) run the hardware and devices troubleshooter.

  Method 3:
  You can see the article mentioned below if the problem persists.
  Troubleshooting: mouse
  http://www.Microsoft.com/hardware/en-us/help/support/troubleshooting/mouse/wireless-Bluetooth

  You can read the articles for more information.

  Troubleshoot the incidents of the response to the mouse or wireless keyboard
  http://support.Microsoft.com/kb/838398

  Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device #section_3

  If the problem persists, contact Microsoft Support Hardware.
  http://www.Microsoft.com/hardware/en-us/support
   
   
  For any Windows help in the future, feel free to contact us and we will be happy to help you.