mouse Notebook 3000 stopped working

Cable connected to the USB port used and broke the copper wire to connect. The PID used the background because there are a lot of friction created in this area, since it is a key to its use. I don't want to pay triple the value of the mouse contacting someone who can tell me who is its broken. How can I replace as there is no PID.

Hello

Most of the 3,000 have a guarantee of 2 or 3 years if I'm not sure which one with that damage
would be covered. Check with the 1-800 number for help - maybe they have a solution.

Check your specific mouse for applicable warranty.
http://www.Microsoft.com/hardware/mouseandkeyboard/ProductList.aspx?type=mouse

Material guarantees MS
http://www.Microsoft.com/hardware/warranties.mspx

Supported MS material and warranty claims & Tech Support

http://support.Microsoft.com/select/default.aspx?target=assistance

I hope this helps.

Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Tags: Windows

Similar Questions

  • The keyboard and mouse bluetooth suddenly stops working

    I asked this question before using Dell, but none of the answers provided.
    The keyboard and mouse bluetooth suddenly stops working.

    Given that this only happens when I'm online I make this question to the FireFox support.
    I have the latest version of FF:

    I installed the new BIOS and Shipset, but that does not change.

    Suddenly, the keyboard and the mouse do not respond and I have to restart manually.

    R

    FredMcD said

    Keep a log of when this happens. What did you do when...

    Check the batteries.

    Hello

    Thanks for the help

    Just for information:

    I downloaded a free software called "StartupBooster" and using this to disable or remove some programs, problems with the gel (Take on wood), is gone. In addition it also speeds up boot time.

    Concerning

    R

  • USB mouse and keyboard stop working after I have install Windows Update KB2913431

    After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

    The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

    I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

    I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

    I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

    Thanks in advance for your suggestions you have!

    Edit: I thought I could include other system information.

    Motherboard: Gigabyte P67A-UMD
    -Drivers for integrated components:
    Related articles - USB:
    -Renesas Electronics 3.0 USB root hub
    -Renesas Electronics USB Host controller 3.0
    -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
    -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
    USB root hub-
    -Generic USB Hub
    -Network:
    -Realtek PCIe GBE Family Controller
    Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
    Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
    There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
    Mouse: Logitech (MX518) G3 mouse optical - wired
    Keyboard: Keyboard wired simple Generic USB Dell
    All other USB devices are currently disconnected

    Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

    In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
    This solves the problem.
  • Microsoft Comfort Mouse Sculpt has stopped working suddenly.

    Hello, my mouse Comfort sculpt stopped working all of a sudden. I wrote my notes in Notepad and after some time when I tried to start the mouse it does not work. Tried to replace the batteries, but of no use. Updating drivers did not help. Sculpt keyboard works very well. I tried on two machines and having the same problem. The blue laser light under the mouse is dead. However, when I turn on the mouse (power on) the blue light flashes for a second. Not sure if it is a hardware problem. I bought this mouse in January 2014 and worked great until today! Help, please.

    Hi Jordan,.

    From the description of the problem, it seems that it's a hardware problem. I would say contact Microsoft hardware support to improve assistance about the issue you are facing with Microsoft Comfort Mouse Sculpt.


    How to contact Microsoft if you have questions about your hardware device.

    http://www.Microsoft.com/hardware/en-us/support/contact-us

    For more information on how to replace or upgrade to Microsoft, hardware software and manual, click on the number below to view the article in the Microsoft Knowledge Base:

    326246 how to replace Microsoft software or hardware, order service packs and upgrades and replace product manuals

    The third-party products that this article discusses are manufactured by companies that are independent of Microsoft. Microsoft makes no warranty, implied or otherwise, regarding the performance or reliability of these products.

    Hope this information helps. If you need help with Windows, let us know and will be happy to help you.

  • Why my Bluetooth Notebook Mouse 5000 suddenly stopped working

    I was with my mouse ended last night & my mouse was working properly, but during a transaction, it suddenly stopped working. The bluetooth at the bottom of my toolbar says bluetooth is activated & panel says that it works correctly. I tried new discovery mode, but I don't have the code requested. Please help if you can. I don't know too much about computers, so if you can put answers in terms I can understand, I would be happy.

    Hi MzMillie,

    Is this a microsoft product? When you are prompted for a key code (although it has not one) try entering 0000 by using your keyboard. For tips on solving this problem, please see the link below.

    http://support.Microsoft.com/kb/952818

    Let us know if this helped. If you have other questions about this, feel free to post on this thread. Thank you.

  • 23-1000 all-in-one Pavilion: mouse and keyboard stop working

    I had my all-in-one since end of February 2016 - bought at Best Buy local - touch screen pc works still but don't do me any good because the mouse and keyboard do not work after 3 months of excellent performance.  Both have new batteries.  Can be signal problem because I've set up wireless.

    Help - frustrated and have no idea what to do.

    Thank you

    Terry Anderson

    Hello @MaggiesMimi,

    Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

    I read your post on the issue of the keyboard and the mouse.  I understand that they both stop working recently, and you have already replaced the batteries.  I can certainly help you with this!

    First of all, try to review the following document and let me know how it goes:

    HP PC - keyboard and wireless mouse troubleshooting

    Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

    Have a great day!

  • Satellite C55-A-1R8 - mouse controls have stopped working

    Hello

    My mouse controls stopped working. I can only use the keyboard and or not integrated and standalone mouse mouse work. This makes my laptop unusable and inaccessible because there is not much I can do without the mouse. I bought it only in May and it is running Windows 8.1.

    My laptop is a Satellite C55-A-1R8

    I don't know what to do, please help!

    I will contact Toshiba support Monday, ashamed that they are closed weekends. Fortunately, it is still under warranty, but I'm not impressed. I guess it's related to the operating system.

    Thank you in advance for your help!
    Nathalie

    Maybe just the touchpad is disabled? Check it using please combination keys FN + F5 or simply using F5.

    Please check it out and provide feedback.

  • Microsoft Wireless Mobile Mouse 3500 has stopped working

    My wireless mouse has stopped working. The green light at the top is, but the blue light down below will not be displayed. I can push buttons and he will answer, but when I try to move my cursor I get nothing.

    Hello

    I tried new batteries?

    Looks like the mouse has problems.

    Wireless Mobile Mouse 3500 - has a 3 year warranty.
    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=019&active_tab=systemRequirements

    Microsoft Hardware warranties
    http://www.Microsoft.com/hardware/warranties.mspx

    These mice are delivered with 90 tech support of day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Wireless Mobile Mouse 3500 has stopped working

    My 3500 mobile wireless mouse has stopped working. Someday, that my mouse does not work all of a sudden. The led on the mouse is on, and the mouse has a new battery. I tried to plug the receiver most in each usb port and on another computer and still nothing.

    You did all the good troubleshooting and my conclusion is that you have a dead mouse, it happens, if it is still under warranty it resume.

  • Mouse and keyboard stopped working on Windows 8

    I have a laptop Sony Vaio model VGN-NS110E 2010 number middle. Since a few days ago my mother used it, and after it was closed and she turned on, the keyboard and the mouse do not work (the mouse wont even see on the desktop). (Yes, I tried to plug in an external mouse and keyboards, the computer won't even save) It seems that the keyboard does not work for a second before loading windows because I can press the NumLock key and the light comes on and goes off. But once windows starts loading, it stops working. The mouse and the keyboard also works if I get the computer start in recovery mode (the blue screen with the options to perform a system recovery, etc.). I can't the computer to boot in safe mode. And I tried to do a reset back a few days or a few weeks, and the mouse and keyboard still do not work. I'm guessing that the drivers are not loading, for some reason any. I guess the logical solution would be to do a factory reset, but my mom has all these bookmarks saved in his internet browser explorer, that she does not want desperately to lose. Anyone has any suggestions on how to fix or at least on the way to save somehow my moms stuff and if a reset?

    Hello Duane,

    Thank you for the update on the issue.

    If the keyboard and mouse does not work in one of the option, this means there could be a hardware problem is not getting detected so you may have to perform a refresh of your computer, but for this, there are also a working keyboard and a mouse. The best option that I can help you is to contact the manufacturer of your computer (SONY) or technicians who can check it physically and can reach to the root cause.

    Keep us updated on the issue.

  • Wireless Notebook Optical roulette 3000 stopped working

    Original title - wirelessnotebookopticalmouse 3000wheelstoppedworking

    Use since a long time... recently when you hit the wheel to move the text upwards or downwards, nothing happens most of the time. Have done all the troubleshooting items, synchronizatioin, etc.  Help someone out there?

    Hi Joseph,.

    Thanks for posting this question in the Microsoft Community.

    1. what operating system is installed?

    2. what security software is installed?

    3. don't you make changes to the computer before this problem?

    4. What is the brand and model of the mouse?

    5. What are all the steps you tried on the computer?

    Follow these methods.

    Method 1.

    Plug the mouse on another computer and check if that helps.

    Connect a different mouse to the computer and check if that helps.

    Method 2.

    Plug the mouse, run the hardware and devices Troubleshooter and check if that helps.

    Follow the link given to open the Hardware Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

    Method 3.

    This tutorial is designed to help you identify and fix the mouse, touchpad and keyboard problems in Windows.

    Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/en-us/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

    Additional information.

    Support for Microsoft mouse, keyboards, LifeChat, LifeCam & more: http://support.microsoft.com/ph/7746#tab1

    Feel free to post your request here on the Forums of Windows, we would be happy to help you.

  • Mouse and Trackpad stopped working with the update of Yosemite may 2016

    I have an iMac that I bought in December 2012 with a magic mouse and trackpad.  With the last update of Yosemite or work on so I have no way to enter anything in the computer.  Has anyone else seen or resolved?

    No way to re - start in safe mode?   If you can, this can help.

    To load your Mac in Mode safe, press in and hold the SHIFT key while it starts. You can now stop the SHIFT key when you see an Apple logo and progress bar. To exit Safe Mode, just restart your Mac without hold the SHIFT key.

    NB.  Google script.

  • Mouse and keyboard stop working

    I have windows 7 64 bit edition Home premium.  Intel I5 6 GB of Ram chip. Had this system for 3 years and no problem.  Today, when I myself post on someones facebook page all of a sudden my keyboard stopped entered the words I typed. did not work.   The mouse was working. I rebooted and it worked for a few minutes.  Then he stopped again.  I plugged in the keyboard to a different usb port and it started working, but then the mouse has frozen completely.  I put the mouse on a USB of Hung and it works for now.   My anti virus is so far - I even ran the Norton Patrick gum aggressively looking for problems and he came back with no risk not found.   Is there any type of virus which would attack the keyboard and mouse?  Did someone had experience with in the past?  I have not downloaded new software in a year so nothing new has been added unless there is an automatic update of windows.  Just checked and the last updated 2/15, a few weeks ago and today is the first time with the problem.

    Hi Carl,

    1. What is the brand and model of the mouse/keyboard/computer?

    2. do you get an error related to the question message/code?

    This problem might be caused by the virus, but this usually occurs due to drivers of bad/corrupt keyboard/mouse/USB host controller.

    I suggest you follow the troubleshooting steps for the mouse and keyboard from the Microsoft KB article and check if it solves the problem.

    Mouse, touchpad and keyboard with Windows problems

    http://Windows.Microsoft.com/en-NZ/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

    Also refer to:

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISN

    Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

  • Microsoft lifecam 3000 stops working

    I recently bought a microsoft lifecam 3000 and when I use the camera it work until the microphone lights up and then a shrill sounds begins and the person I'm talking about does not hear me. I have tried everything I can think of why it is doing this? Help.

    I plan to take back and get one that actually works.

    Hello

    I suggest you try to update the latest drivers and software for the lifecam and check if it helps, here is the link:

    http://support.Microsoft.com/kb/929087

    Also check out this link:

    http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspx

    Check if that helps.

  • My Microsoft Wireless Mobile Mouse 4000 has stopped working!

    My Microsoft Wireless Mobile Mouse 4000 was working the other day and now won't work.  I tried batteries, turning power on and off, press and hold the bottom of the mouse USB and taking even the USB key.  I have a Windows 7 computer, I don't know how relevant this is, but I thought I should put it here anyway.  ANYONE HELP!

    I had the same problem and this is what worked for me:

    remove the USB transceiver

    Open the DEVICE MANAGER

    Right click on the MOUSE AND OTHER DEVICES of SCORE and choose SCAN for HARDWARE CHANGES

    Click with the right button on USB BUS CONTROLLERS, and then select SCAN for HARDWARE CHANGES

    Insert the USB transceiver

    Your computer should detect the mouse and function properly

    I have to repeat this process pretty much whenever I start my laptop, but it is only a few steps and not really a huge nusiance.

    Good luck.

Maybe you are looking for

  • InstallShield engine

    When I try to change or remove a program, I get an error message. That is to say the engine installshield (ikernel.exe) could not be launched, and no such interface supported. How can I fix this?

  • A driver for a unknown device in Windows 8: ACPI\INT33A0

    I have an unknown device listed in Device Manager. The hardware ID property has the following values: ACPI\VEN_INT & DEV_33A0 ACPI\INT33A0 * INT33A0 A search on Google, I found this page on support.lenovo.com calling device iSCT virtual device ACPI (

  • 700 - 327c envy: USB 3.0 700-327c does not

    So I installed the updated for sp1 drivers have all set up and stable operation but for some reason works only usb 2.0 and usb 3.0 does not work I have checked the wires to make sure that its all plugged in my Device Manager shows no problems. I don'

  • Cannot print on vellum or fabrics with all in a 310a

    I'm having trouble printing an autoCad drawing and XP on my 310 printer has one.  I make drawings of the installation and want to other views of a print on fabric or vellum area to use as overlay to compare page layouts.  My old HP printer allowed me

  • 'dial-up connection' dialog box keeps popping up

    When I use my computer (OS: Windows Vista Business) in offline mode, the dialog box 'dial-up connection' (asking me if I want to connect to the Internet) appears very frequently. It's super annoying!  Is there a way I can get it to stop happening in