Mouse pad works only in Mode safe

Similar Questions

• Satellite L30 Vista screen don't be turned on; extrnal monitor works only in Mode safe

  Hello

  I have LS30-10s.
  first the laptop screen not lit up even if I saw a pale ghost of the icons etc.;

  I tried the fact to unplug and now the switch down (battery is dead long) successfully intermittent and random;

  I borrowed an external LCD (Lenovo $) and went well, and by pressing Fn + F5 would actually sometimes make the laptop screen live too.

  I changed the screen inverter and that seemed to restore the laptop screen, but the next time I restarted + or + screen would work unless I chose safe mode.

  Currently I can only use the screen external and only in safe mode.

  Everyone knows this?

  Hello

  Just a few questions:
  The external monitor works properly before disassembling the laptop and replaced the LCD inverter Board?
  What exactly happens if you start the computer in normal mode?

  Have you tried to start Notepad using a Live CD (PE Win or Linux live CD)?
  I would also recommend to check if new OS install is possible.

  Safe mode is just a test environment and the system does not access all recourses of material by using safe mode.
  So, theoretically the issue could be related to a faulty hardware or system problems.

• Vista Ultimate black screen with the living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86, but it will not install in safe mode

  have a ultimate black screen vista under contract with living mouse, pc will only boot in safe mode, downloaded hotfix kb977675-v2 - x 86 but it will not install in safe mode

  have you tried the manager used tasks related to bugs

  Msconfig

  Explorer.exe

  and have had no joy... Please heeeeeeeeeeeelllpppppp

  Hello

  It is the fix in case there are any information it helps.

  A computer that is running Windows Vista or Windows Server 2008 stops responding at a black
  screen early in the startup process
  http://support.Microsoft.com/kb/977675

  Microsoft - contact patch Support issues.
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  ======================

  Other troubleshooting methods that can help.

  Why my screen is black when I start Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  References to Vista also apply to Windows 7.

  No registration necessary data and re - install Windows 7 might be the best option, but here are a
  few others.

  You can save your files by putting the drive in another computer or an external hard drive enclosure, then
  saving them. Do this using several methods to redundantly. Of course, a real computer
  Shop or the manufacturer of your system can help to recover the files.

  --------------------------------------------------------------

  You can access Mode safe? Repeatedly press F8 as you start? If yes you can try Control Panel
  -Double click - Driver tab - click on UPDATE driver - device Manager - map - graph
  then right click on the device and UNINSTALL - REBOOT.

  Another method to try to get to the desktop (try in normal Windows Mode without failure)
  is CTRL + ALT + DEL and the processes tab find EXPLORER.exe and END PROCESS on it.
  then on the tab Applications - lower right - new task - the type in EXPLORER.exe. Safe mode is
  accessible by tapping F8 as you start several times.

  First check this thread in case it is simple and if not to come back to this thread.

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/50247d5e-0ae0-446c-A1bd-11287fd1478a

  Black screen problems are extremely difficult to repair and all hotfix is usually a hit or miss
  base. That there is no information on a black screen as there is just a blue screen
  adds to the difficulty. Often using a restore point or Startup Repair will have no effect.
  You can try a google to see the proposed repairs, whom some have worked however these
  cover a wide field of efforts.

  Here's a video of one of them.

  http://www.Google.com/search?hl=en&q=black+screen+of+death+Vista&btnG=search&AQ=f&OQ=&AQI=G1

  Here's another fix
  http://blogs.PCMag.com/SecurityWatch/2008/12/the_mysterious_black_screen_of.php

  You have a window 7 disk? You can try restoring the system to it. If you do not have the
  discs, your system manufacturer will sell them at low prices. Or try in safe mode if you can get
  it.

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  You can create a recovery disc or someone else use same version (to do the system restore
  It only needs to be bootable).

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ------------------------------------------------

  These require the correct Vista discs since you can not start safe mode.

  Try the Startup Repair tool-

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  Try Repair Options recovery or a Windows 7 boot disk system

  How to run a startup repair in Windows 7
  http://www.SevenForums.com/tutorials/681-startup-repair.html

  -----------------------------------------------

  Here are a few Google searches where many have found different solutions:

  Vista black screen - check that a 1st
  http://www.Google.com/search?hl=en&source=HP&q=Vista+black+screen&AQ=f&OQ=&AQI=G10

  Vista black screen Solution
  http://www.Google.com/search?hl=en&q=Vista+black+screen+solution&AQ=f&OQ=&AQI

  Vista black screen Fix
  http://www.Google.com/search?hl=en&q=Vista+black+screen+fix&AQ=f&OQ=&AQI

  -----------------------------------------------

  If necessary and you can access all ordinary Windows.

  If nothing works, you can do a repair installation.

  How to start on the System Recovery Options in Windows 7
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  ---------------------------------------------------------------------------

  Another method that works sometimes: at the command prompt, type of Vista startup disk:
  (type in a single line or copy / paste a line at a time and then press enter - do not type)
  parenthesis or "BOLD")

  c:

  cd\

  CD c:\Windows\System32\winevt (there is a space between cd and C :)
  
  Ren LogsOLD Logs (there are spaces between ren and newspapers and Logsold)

  RESTART Windows

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Firefox 5 displays the right fonts only in Mode safe!

  After upgrading to Firefox 5, I noticed it displays the wrong fonts (larger than they should - they look ok in Firefox 4.x, Chrome, Opera).

  The strange thing is that if I run Firefox 5 Mode without failure, it displays it correctly. I have disabled all addons, I cleaned all Cache, configuration of the size of minimum font... even reinstalled. It is allowed only in Mode safe looking.

  What else to do?

  Safe mode disables extensions in Firefox 4, and disables hardware acceleration.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  Try to turn some of the prefs Boolean gfx.font_rendering on the topic: configuration page to disable some features.
  
  Filter: gfx

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.
  
  You can use the filter at the top bar of the on: page config to more easily spot a pref.

• keyboard recognized only in Mode safe

  I am running XP SP3... .n a HP desktop computer

  A normal start, or a PS/2 or USB keyboard is recognized.  However, both are recognized in Mode safe. .

  I have a Logitek LX7 mouse that is working very well in Normal Mode as well. but no keyboard.  I ran THREE different cleaners on the system, the malware dectives, etc. etc.    I have uninstall/re-installed keyboard drivers then in Safe Mode and do not know what else to do?

  When in normal mode, the mouse works fine, but I can't do what-so-ever typing.

  It happened once before about two weeks ago.  But after a few days the re-boot it is normal again.

  I know that it is probably little corrupted code somewhere, but you can't FORCE the normal system to recognize material?:  I tried everything I know.

  I looked through the event viewer reports and you seem to have a staggering number of questions. It would be useful to know if you have Windows XP Home Edition or professional? Also do you have installed SP3?

  Type: error
  Date: 20/06/2011
  Time: 11:10:19
  Event: 1008
  Source: MsiInstaller
  Description:
  The installation of c:\WINDOWS\Installer\92b0f.msi is not allowed due to an error in software restriction policy processing. The object is not reliable.
  I not understand yet what this means.

  Type: error
  Date: 20/06/2011
  Time: 10:44:16
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service EventSystem with arguments "".
  to start the server:
  {1BE1F766-5536-11D1-B726-00C04FB926AF}

  {1BE1F766-5536-11D1-B726-00C04FB926AF} is 'COM + Event System'
  service.

  I would like to check the status of the Services.

  Click on the Start button and select Control Panel, administrative tools, Services. Find event of COM + in the list system and verify that the startup type is manual (startup). If it is not set to manual (start) right click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started.

  Also, look for Remote Procedure Call (RPC) in the list and make sure that the startup type is automatic. If it is not set to automatic, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: error
  Date: 20/06/2011
  Time: 11:02:39
  Event: 10005
  Source: DCOM
  Description:
  DCOM got error "% 1084" try to start the service StiSvc with arguments "".
  to start the server:
  {A1F4E726-8CF1-11D1-BF92-0060081ED811}

  This type of error, click on the Start button and select Control Panel, administrative tools, Services. Find Windows Image Acquisition in the list and make sure that the startup type is manual. If it is not set to manual, right-click and select Properties, general tab. There is a box after the startup type. The options are available in a menu drop-down by clicking on the down arrow to the right of the box. Make the change and click apply and then click OK. Restart the computer and verify if it has started

  Type: WARNING
  Date: 20/06/2011
  Time: 10:37:21
  Event: 18
  Source: i8042prt
  Description:
  The device sent an incorrect response (s) after a reset of the mouse.

  I8042prt driver is the driver of keyboard and mouse PS/2.

  This link can help with keyboard / mouse prroblem
  http://www.EventID.NET/display.asp?eventid=18&eventno=1480&source=i8042prt&phase=1

  McAfee is a bad choice for your antivirus. There is a lot more suitable alternatives to freeware. Microsoft Security Esentials is commonly recommended to these forums. Personally, I prefer AVG 2011 Antivirus (FreeEdition). Withdrawal could remove some of the problems you have.

• Vista can only boot mode safe after updating Panda Internet Security installed on the system

  Original title: VISTA can only successfully starts in Mode safe. When you try the System Restore restarts in Normal Mode and restore failed "Volume Shadow Copy Service used by the system restore does not work"

  Problem started (I think) after that PANDA INTERNET SECURITY did a update and says a restart is required (29/09/2010). System could not restart normally. Started, but virtually nothing loaded and couldn't do anything.

  In Safe Mode, first mistake was a Protection Exception for TPSrv.exe (a PANDA executable)

  Tried to do a Safe Mode system restore to point before PANDA update (28/09/2010). System Restore starts safe mode and then restart in Normal Mode.  After about an hour comes up with error message "Volume Shadow Copy Service used by the system restore does not work. (0 x 81000202) event log.

  I also tried sfc.exe but found no compromise windows

  Hello

  Follow the steps mentioned below.

   

  Method 1:

  Check if the Volume Shadow Copy service is started. Follow the steps mentioned below.

  a. click the Start button and in the search box, type in: Services.

  b. press "Enter" to open the Services window.

  c. find related services that are listed above and check the status (on the road) and the Startup Type (automatic).

  d. double-click the service to change the status of started and set the startup type to automatic.

  Try to do a system restore and check.

  Method 2:

  Since you are able to boot into safe mode, I suggest you perform a clean boot and disable all non-Microsoft applications, then boot normally and control.

  To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Method 3:

  If you think it's a Panda Security software that causes this problem then, I suggest to uninstall Panda security of the system and check if you're able to boot normally.

  http://www.pandasecurity.com/homeusers/support/card?ID=23010&IdIdioma=2

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• What size of mouse pad works best?  I'm new to Illustrator.

  What size of mouse pad you like to use to design graphics and Illustrator?  I'm new to Illustrator! Thank you ~.

  I just saw the optical mouse doesn't work does not in many different places, Carlos. They do not in fact around 80/20.

  The mouse mat shouldn't have any model of contrast on this, btw. When you put your logo on a mouse pad, an optical mouse more will have probably the cursor jump around like drunk.

• mouse pad works correctly. active when you press is not on the left button

  active mousepad without pushing the button left mouse and sometimes active when you move the arrow with your finger on the mouse pad.  Pavilion of Win 7

  Have you tried uninstalling and reinstalling the driver for the touchpad for your laptop? You can download it from the download page of software and the driver for your model laptop.

  Alternatively, you can follow the instructions on the following document in order to identify the problem with the touchpad.
  http://support.HP.com/us-en/document/c01876141

• My Windows 7 works only in a safe mode. What can I do?

  When I start my computer, the office looks like as usual. However, I can't start any program. When I double click on ANY icon (including the START BUTTON), the circle of rotation it shows... and it runs forever. However, in safe mode, everything works fine.

  I followed the instructions on How to perform the boot in windows , but it did not help. So that means that this issue is not caused by application or start service interference.

  I tried to restore, but it has not all possible restore points. What can I do?

  Here is the link to the system information file

  Please help me

  UPDATE

  When I connect under a different name (guest), everything works normally.

  Alex

  Lets start with the latter, and we will work through to see if we can get this resolved.

  09/07/2014 02:13 application Error failed application name: TeamViewer.exe, version: 9.0.29947.0, time stamp: 0x53b3d3c5
  Name of the failed module: LvHook.dll_unloaded, version: 0.0.0.0, time stamp: 0x4ddd846b
  Exception code: 0xc0000005
  Offset: 0x3aa645da
  ID of the process failed: 0x13ac
  Start time of application vulnerabilities: 0x01cf9b1b4e6f71fa
  The failing application path: C:\Program Files (x 86) \ \Version9\TeamViewer.exeTeamViewer
  Path of the failing module: LvHook.dll
  Report ID: 8c82bf14-070e-11e4-8f08-e89a8f766234

  dtsoftbus01 virtual DAEMON Tools c:\windows\system32\drivers\dtsoftbus01.sys Bus driver

  dtsoftbus01.sys
  Driver Description: Daemon Tools driver
  BSOD in Win7 problems

  Remove the Viewer from the team.

  Delete Hotspotsheild (don't know cause of BSOD)

  Completely remove SuperAntispyware (temporarily) and install Microsoft security Essentials.

  Click Start, type "msconfig" under the tab "Général" brand safe "Normal startup" is selected. Click the "Boot" tab and make sure "Safeboot" is disabled. Click 'Apply' and 'OK'. Restart your computer.

  To be able to diagnose what might be causing your crash of the system, we must dump files.

  Please refer to the link below to get the procedure recover, zip and upload them to the site as onedrive, file sharing google "dropbox, etc.".

  When you are finished, make public the folder and share the link here.

  Blue Screen of Death (BSOD) created by ZigZag3143 (MS - MVP)
  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-system/blue-screen-of-death-BSOD/1939df35-283f-4830-A4DD-e95ee5d8669d

• Mouse buttons works only with Windows 7

  Just returned from holiday, everything worked before but I try logging on to windows, and when you are prompted to select the profile that I cannot, after a while I finally get in but can not select anything on the desktop either. After a while, I start to use my keyboard so I not found this isn't my PC that freezes or whatever it is that it works fine, I can change on my mouse to another and get the same thing. Basically, the cursor works, but when I click on open areas/icons or just click on the buttons with that I get no response, even right click, I had a few moments for a few minutes where he worked, but have really no idea of why it works and why it doesn't.

  What works changes whenever I restart apparently.  Once I have restart and the left and right click of mouse buttons were functional full on taskbar, but nothing else, right now they do not work on the bar of tasks/all programs but you can click on anything on the desktop and open

  Both have been wired mouses, I mainly use the G5 wired mouse, point updated all drivers and still have the same result

  Hi MJKR,

  Try these steps and check the result.
  Step 1: Check in safe mode
  a. see start your computer in safe mode
  b. connection to the problem user account and check if the problem persists.

  Step 2: If the problem does not persist in safe mode, then try to clean boot
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. check to see if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Step 3: If the problem persists, restore the computer to an earlier time
  a. Click Start, type system restore in the search box and then in the list click on the system restore program.
  If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  b. in the System Restore dialog box, click on choose a different restore point and then click Next.
  c. in the list of restore points, click a restore point created before you started having the problem, and then click Next.
  d. click Finish.
  e. restart the computer and check if the problem persists.

  See What is system restore?

  Visit our Microsoft answers feedback Forum and let us know what you think.

• System Restore works only in Mode without failure. Why?

  Using Windows 7 Home Premium and can do in only safe mode system restore. In normal mode, the Restore Points are generated without problem.

  Hi JRHoot,

  Thank you for reaching out to the Microsoft Community.

  According to the description, it seems that you are unable to run the restore of the system in normal mode.

  To guide you in the right direction, I need a little more information of the computer with the problem. Please help me answer the following questions:

  -You have an error message when running the system restore?

  I will certainly help you with this issue.

  Here are a few troubleshooting methods that you can try in order to solve the problem.

  Method 1: Test the issue of clean boot and check.

  To help resolve the error message, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Please note: After troubleshooting, be sure to start your computer in normal mode by following these steps.

  a. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press Enter.Collapse this includes this image

  If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

  Method 2:

  Check the status of the shadow copy Volume service. If it is, then try to restart the VSS service and check.

  (a) click Start, type services.msc in the start search.

  (b) find the instantaneous volume cliché service.

  (c) make a right click on the Volume Shadow Copy service (VSS) and select Properties. Check if it is started.

  (d) if it is stopped, select start or restart. Make sure that the service is started and set as Automatic.

  (e) click on apply and OK, if you make changes.

  (f) check the status of the issue.

  Method 3: T emporarily disable the security software and verify.

  If the system restore works fine after you turn off the anti-virus, you can contact the manufacturer of security software and check if you need to change the settings.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If the problem persists, or you have questions about Windows, do not hesitate to let us know. It is our pleasure to be of service.

• Videos works only in mode without fail, otherwise just sounds times

  Hello
  I'm using Firefox 13.1 and 11.3 flash
  On websites like metacafe I can't play videos, everything is white or white but his cheek. I uninstalled and did clean install of firefox, so no new addons is installed just nvidia, shockwave, flash and adobe reader, and that's all.

  If I use firefox in safe mode then it works perfectly and didn't have any problems with anything. Tried to disable hardware acceleratin inf flash drive, but once I could open the flash setting just in SafeMode if you settings will not open just the flash global settings normal setting does not open. also tried to uninstall flash 11.3 and back to 10, but that has not helped.

  I'm using firefox for 8 years and hope I won't be in a need to change, because so far I really liked,

  You actually confirmed by

  • count the number of instances of plugincontainer that protected mode is disabled.
  • and also by checking the contents of the mms.cfg file.

  Apparently regardless of the version of the Installer used FlashPlayer can change this setting.

  I'm rather clutching at straws here because logically, it is hardware acceleration that I expected to be the problem, and then I would have suggested looking for an update of the graphics driver.

  • Update your graphics drivers to use hardware acceleration and WebGL
    • and see also General information on difficulty common audio and video questions
  • Another tip that I found is to delete Cookies Flash (LSO) /questions/922907 #answer - 319555

  No doubt you have problems with all the videos, not just some sites, you can try the audio and video links in this thread to Adobe

  • http://forums.Adobe.com/message/4311066?TSTART=0#4311066
    • that also has a link to Adobe troubeshlooting page http://forums.adobe.com/thread/889577

• Yoga 3 Pro Touch Pad works only with Win10

  This alluded autour in several other YOGA Pro 3 WIN 10 upgrades, but it should probably start splitting on each particular issue.

  My upgrade to Win10 without any problem on the upgrade itself. I did the upgrade with an attached mouse and now I no longer a switch back to the use of the touch pad. Another way of saying this is that my Fn + delete button doesn't work.

  I checked Synaptics for a driver, but they don't list one for Win10.

  A know a work around to get the touchpad working again or a suggestion to fix?

  Thank you

  Have you tried to install th Synaptics driver for Windows 10 on Lenovo's Support site?

  http://support.Lenovo.com/us/en/products/laptops-and-netbooks/Yoga-series/Yoga-3-Pro-1370-laptop-Len...

• post action step works only in mode 'Test DUT'

  Hello

  My main sequence has a list of steps, any file type of sequence.  I Specifies an action on each of them to skip to the end if the seq fails and if a flag is set:

  FileGlobals.StopOnFail == True & RunState.SequenceFailed == True

  I found that it only works if I run my test mode 'Test DUT'.  If I select ' run selected tests use Single Pass', then, he igonre this.

  This is how is he supposed to be?

  How can I solve this problem?

  Thank you

  Rafi

  TS4.1

  
  

• The mouse pointer freezes except in Mode safe

  After I connect my mouse pointer (except in SafeMode) freezes and does not detect my mouse and can not use computer. whatcould happened and how do I use the mouse again normally?

  Original title: it does not detect the mouse

  Hello Queen,

  -          What are the recent hardware/software changes on the computer?

  -          Was this well before work? If so, what changes to the configuration of the computer?

  -          What version of windows you use?

  -          Which is a wired or a wireless mouse you use?

   

   This problem could be due to some conflicts of third-party software with the mouse on the computer drivers.

   

  Try to clean boot

  I suggest you perform the cleanup starts, and then download and install the update from the following link.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  
  Note: Follow step 7 of section of boot KB929135 to put the computer back to normal mode.

  I hope this information helps you!