Mouse red/detector of brightness does not?

I bought my book mac pro a little over a year and I bought the mouse with him.  Like the mac book pro and the mouse, but the mouse red/sensor has stopped working.  I replaced the batteries (new) and the Green led lights up and flashes - the mouse seems to be associated for the mac book pro but the red sensor/light does not illuminate.  Any ideas?  What is this repairable total or is - radiation?

Grateful for your point of view

mykef

Red light?   If it's a mouse Apple Magic Mouse sensor is not displayed in red.   You have an Apple mouse?

Tags: Peripherals

Similar Questions

  • X120e Funtion keys brightness does not?

    I just got the x120e and I have been through the fixed auto-éclaircissant himself. After that, I hit the Fn + Home and adjusted to my preference. He was not on the charger when I did so I was in a dark room I had the brightness down. Later in the day, I plugged it in to charge and I went to make it brighter. The brightness does not change however. All other agents Fn + F keys work. But not both for brightness. The strange thing is, I shut down the computer, whereas standby mode, then opens it again and it was really brilliant and I had to almost squint, but once again the keys did not work to lower it. I closed it and opened it and it is even lower. The keys still don't work. Any suggestions?


  • Device flashing red lights r200 printer does not

    flashing red lights the printer does not

    The flashing lights are no doubt an error message from the printer for you.  See the manual supplied with the printer or the web site of the manufacturer of the printer - model support and the type of lights flashing almost certainly have a specific meaning which will clear once you know what it means.

  • Running win XP pro sp2 mouse moves, but everything else does not

    Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

    Hi BobM202,

    1. did you of recent changes on the computer?

    2. you receive an error message?

    3. do you have security software installed on the computer?

    4. are you referring to freezing except office mouse movement?

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See section to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

  • Core i3: brightness does not change

    sound suddenly that my brightness does not change, I restart my laptop several times, but the brightness is not changing of f2 and f3 goes I go to setting and change the brightness, but it does not tell me what I do?

    Hi there @Hammad18

    Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

    I understand that you are having problems with brightness adjustment, on your laptop. I'm happy to help you with this. Please report the number of complete product for your laptop. Check out the following, if you need assistance with this information. How can I find my model number or product number?

    For now, maybe it's useful to you.
    The problems with the brightness of the screen

  • Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

    Original title: mouse scrolloing problem

    I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

    Hello

    1. the problem occurs on a particular application?

    I wish that you follow all the methods in this article to resolve the problem.
     
    The problems with the mouse button or scroll the parameters
    http://support.Microsoft.com/kb/303091
  • I have my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it might

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at * address email is removed from the privacy *.

    Thank you very much. I hope hear from you soon. Thank you once again :)

    Can I get help with a problem please? my button to right click on my mouse hp laptop pavilion 2008 does not work when I click on it. I tried to delete some files, but it wouldn't let me not make a right click on it to remove

    could you please email me at e-mail removed for privacy

    Thank you very much. I hope hear from you soon. Thank you once again :)

    You have a laptop. So try the right button on your touchpad. It work?
    If so, the only remaining possibilities are:
    1. bad mouse. Get a new one.
    2. defective UBS port. Plug the mouse into a different port. See if the right click of the mouse works this time.

    P.S. We do give advice to users via e-mail. All responses must be published and remained in this forum so that others with the same problem will use the answer.
    For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • The brightness does not change!

    I recently updated my windows but when it is done updating the screen brightness is not editable it is kinda stuck. I hate it when I use my laptop on the day because I can't increase the brightness. REMEDY!

    Hello

    Thank you for giving us the opportunity to help you.

    According to the description of the problem, you can not change the brightness after Windows Update. Here's a thread where a similar question was considered, then try to follow the suggestion of Pinaki and see if it also helps you to solve the problem.

    Brightness does not change

    Get back to us if the problem persists, we will be more than happy to help you.

    Kind regards

  • fingerprints fingerprints & brightness does not not with windows 8 build in hp probook 4540 9200 s

    HP probook 4540 s

    Windows 8 build 9200

    I detected a problem after the installation of the new operating system windows 8. fingerprint sensor does not work. After installing hp protect tool pilot there show an error message. his revealing "microsoft framework 3.5 required", but I have framework 4.5... Correct this essue as soon as possible. and another problem is brightness does not perfectly.all shortcuts keyboard not work except the brightness. and I can't reduce it manually too.my windos is enabled. and run fast on my laptop. Please fix my problems as soon as possible.

    Thank you.

    Hello thatguy2,

    Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  • If the State shows red and javascript script does not

    I am just learning Javascript and I can't believe, I have problems with that simple statement, but alas I am.

    Any help would be appreciated.

    The script is a script of learning:

    JavaScript document

    var crust = prompt ("what kind of crust do you want - thin or regular?'");

    If (== crust "thin"). (crust is 'regular')) {

    var cheese is prompt ("choose your cheese?");.

    {Switch (Cheese)}

    case "mozarella":

    case 'feta ':

    "parmesan" case

    case "cheddar":

    break;

    by default:

    Alert ("sorry we not that kind of cheese.");

    break;

    }

    } else {}

    Alert ("sorry we don't serve that kind of crust here.'");

    }

    Line no 4 and 19 shows red and the script does not run.  Help, please.  I created a similar script with numbers and it works fine but as soon as I put channels in I get errors.

    I tried to rewrite these lines so many times in so many different ways.

    I use Dreamweaver CC 2015, I Am studying an old version of Javascript?

    Any help would be appreciated.

    Thank you

    Try to run your code through this online validation tool.

    JavaScript - http://www.jslint.com/



    Nancy O.

  • My helmet is bright red, and the speakers does not work, when I try to adjust the volume when there is no headset/speakers in, there is a sign of the cross as the symbol of the volume where the places are supposed to be, macbook pro retina display

    My helmet is for some time, as the eye of the terminator, glowing and speakers have not worked since. I need to plug headphones or external speakers. Whenever I try to adjust the volume when it shows just a cross symbol under the sign of the volume, where small squares usually are (see below)

    Is there a way to fix this? Some other similar forums tell me to try to manually move a switch in the audio jack, but I can't seem to find such a change and the thing that seems most like a light switch, does not move.

    Can someone please help?

    Thank you

    Your audio output is stuck in optical mode, this is the red light.

    The solution is to try to insert and remove the plug a dozen times or more in the hopes of convincing making fall out of optical mode and in electric mode.

  • HP probook 430 g3: keys Fn + brightness does not

    My probook cannot control the brightness by fn + shortcut. I tried to update the driver and reinstall the driver but it still does not. Any recommendations? Thanks in advance.

    Thanks for the reply. I just installed the driver "HP Hotkey support (American International)", then it is working.

  • the mouse doesn't work or does not work at startup

    HP Pavilion p6 - 2326 s

    Windows 8

    About half of the time: if I go to my office and come back a few minutes later, the mouse has stopped working.

    And about half of the time I initialize to start work, the mouse does not work.

    Only way to recover the function of mouse is stopped by pressing the Start button.

    It's a HP came with the computer mouse.

    What is the cause? How to fix?

    Thanks for any help,

    saraciborski

    Hi saraciborski, have you tried to change the USB connection to another location?

  • Satellite A100-812: screen brightness does not not & screen turns off after a while

    Some power management features do not work after a bios update (5.90).
    The display brightness can be changed in the power manager, or the top menu system. In the power manager, the cursor can be moved, but the brightness is not set. Toshiba menu system appears to hang on trying to change the brightness with F6 - F7 and won't move the cursor.

    In addition, the screen does not turn off after the set amount of minutes in the power manager.

    What is going on? How can this be repaired?
    Thanks in advance.

    Hello

    Some questions; Why you have updated the BIOS?
    Are you sure you used the right BIOS?

    In my opinion you shouldn't t to update anything if the laptop works properly!

    However, try to access the BIOS, set the default settings and save the settings before exiting the BIOS.
    If this does not help, I would pick up the laptop with the Toshiba Recovery CD.

    Good bye

  • Mouse - touchpad and USB - HID - does not work properely on Satellite L40-139

    The mouse is very unstable. Mouse touchpad both usb do not work properely, but the touchpad a little better. It happens that, even if the mouse using USB to the point does not move, while the left and right button are always react.

    It is brand new computer (L40-139) with initially installed Windows Vista. How can I solve the problem?

    It is very disturbing. Thank you.

    Hello

    have you ever tried to recover your machine, which means a complete reinstallation of your system? First: to exclude the material errors, you must perform this step, and if the error persists, then I suggest you to contact a service partner chartered for a checkup of material and a repair action.

    If the problem occurs after reinstalling windows, visit the following link to find the closest to the ASP available in your country:

    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ASP_SUPPORT

    Greetings

Maybe you are looking for