mouse scroll wheel not

Stopped my mouse scroll wheel, and I can't tell if it's a problem of software or hardware (out of stock).  I tried to reset the scroll in the mouse control panel and checked for Intellipoint updates, but does not.

Advertisement

Try a system restore to a Date before the problem began:

Restore point:

http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

Do Safe Mode system restore, if it is impossible to do in Normal Mode.

Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

Try a restore of the system once, to choose a Restore Point prior to your problem...

Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

http://www.windowsvistauserguide.com/system_restore.htm

Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • My 2000 wireless optical mouse scroll wheel works intermittently-"mouse sigal is low."

    Original title: my 2000 optical wireless mouse scroll wheel works intermittently

    I recently bought a set of wireless with an optical mouse wireless 2000, office 100 wireless keyboard and a wireless desktop kit 3.1 receiver. After you have installed the drivers and the Intellitype/point than roulette software of the mouse does not work all the time, for example after clicking on my way in a 80 page PDF manual and long Web page that the wheel seems to not work in one direction, then the other way won't work. I tried new batteries, latest driver bouquet of microsoft site (intellipoint 8.01) moving to the receiver or away to "signal low mouse." Today, however, the mouse is 2-3 feet away from the receiver and it keeps popping up saying ' the mouse sigal is low you want to start the troubleshooter? Yes, I tried this and tried to move the USB without success. Can someone HELP please... Tired of drag and drop

    Same problem here, but I found a way to make this work (in fact there are two ways LOL)

    -Remove one of the batteries.  Believe it or not, the scroll wheel works perfectly when I remove one of the battery (any).  However, I do not know how long it will last since there isn't that one battery in operation.

    OR

    -Remove the lid of dough and remove the batteries.  Use a screwdriver to loosen the screw about 2 rounds (for some reason, I think that it is screwed in too tight).  Replace the batteries and you are or that you set.

    I can't guarantee that my methods will still work, but the fact is that it works for me since then.

  • Move between photos using the mouse scroll wheel in the library module

    I've recently upgraded to LR6.4, in the library, to the Magnifier module, I can't move between photos using the mouse scroll wheel. When I point the cursor on the picture, I get a "magnifying glass". The only way I can move between photos is to click on the film. I was able to use the mouse scroll wheel to move between pictures before. Help, please.

    It doesn't matter whether or not this option is displayed. Just open the preferences and restart LR should dissipate it.

  • I got an on my mouse scroll wheel,... y at - it a setting to use instead of the arrows?

    I got an on my mouse scroll wheel,... y at - it a setting to use instead of the arrows?

    I'm sorry, but this option is only available in the library Module, and not in the develop Module.

  • The mouse scroll wheel doesn't work does not correctly?

    Win 7, Microsoft Wireless Mouse 5000
    Everything worked fine but I had to reformat & return my computer again the conditions of the plant.  I have add the correct software for my mouse.  Now, when I use the scroll wheel, it moves the screen a full coming soon page (spreadsheet, word processing, etc.).  The unique thing is that I can say that she does so ONLY with products at Microsoft (Excel & Word so far), with any other software, it seems to work as it should (a few lines at a time).  No one knows what is the cause?  Help please.

    Thanks in advance... Bob

    Hello

    1. have you checked if the problem occurs with a different mouse?
    2. don't you make changes on the computer before the show?


    You can try the steps provide in the supplied knowledge base articles and check if that helps:
    Troubleshoot a wireless mouse that does not correctly
    http://support.Microsoft.com/kb/321122
    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398
     
  • Loss of function of mouse Scroll Wheel

    I took a leap and a leap of faith, the upgrade to Firefox 3. something to 11.0. I work through awkward differences in the user interface, but I'm having a problem with the scrolling.

    I can't put my finger on any particular website or the size of the page, but I find that sometimes my mouse wheel will stop working with Firefox and I have to use the scroll bar to scroll through a document. Once he goes, he went. I can move to another tab that previously scrolls with the wheel and it is no longer made.

    If I close Firefox and restart, the works of wheel scroll again (even with the page on which he left earlier. If I leave Firefox running, switching to another application, the scroll wheel works out there, so it is unlikely that the driver is corrupted.

    I am running Windows XP SP3 and Firefox 11.0 (downloaded and installed 05/04/2012)

    It is perhaps too early to know for sure, but I think that my problem, loss of the scroll wheel of the mouse in the web pages after visiting one or two particular websites and some time, navigation is not a memory leak problem as some have suggested, nor a funky extension, but rather a problem of mouse driver. I am using an IBM mouse brand with the driver bundled with it rather than the standard driver from Microsoft. removed the IBM mouse driver (and mouse) and installed a mouse of brand store using the standard mouse driver Windows XP. This has not hung up again within a few days of use.

    If I have a memory leak problem, I don't think I've met the result of it still. The program (which currently use 10.0.4 ESR) appears to be stable, no crashes, no crash and, Hooray! no problem scroll wheel mouse.

    I miss the function 'button magnifies' with the IBM mouse driver (it also works with the generic mouse when the IBM driver is loaded), but I would lose this function than to lose the scroll wheel and must exit and restart Firefox to retrieve.

  • Red line flashing light under the X 3000 HP mouse scroll wheel

    The lack of a better adequacy, m post my question in the laptop hardware section.

    This is the kind of a silly question, but for some reason my mouse HP X 3000 wireless decided to Flash a red color flashing line below the scroll wheel. This mouse HP documentation is thin enough, impossible to find the meaning of this code of lights in my mouse"support page.

    Logitech hardware, this indicates that the battery is very low. It indicates in a X 3000 HP mouse?

    It seems to work normally, but it is followed very precisely my hand movements and do not miss a single click.

    If anyone knows, please reply.

    Thank you.

    The first thing I would have suggested, it is change the battery.  On all the mice I've owned as a flashing red light / line means that the battery is low, as you said.  I can't find any information on the cause, otherwise.

    Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

  • Scroll wheel not working do not in some applications

    I have seen many many posts on the same issue, but have not had any luck finding a working solution in any of them. Here is a link to a thread that has even links to more discussions on the same issue.

    http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/71db7003-45b1-4FBC-844f-da4894c20036

    I have a Microsoft wireless Intellimouse explore 2.0 and have recently upgraded to windows 7 (which is awesome = P)

    What is not so impressive, however, is that scrolling doesn't work at all in some applications, mainly 2 games I've known personally (Dragon Age: Origins and Neverwinter Nights 2), although others have reported other applications that do not work properly.

    Scrolling basically to something approaching normal speed is not picked up at all these games. If I turn the scroll wheel very quickly, in those games he zooms the camera all the way / exit, as if they picked up warpspeed mousewheel scrolling. Nothing happens if I scroll at a reasonable speed. Other applications I've tried work properly with my mousewheel, Internet Explorer, Firefox, Chrome, Explorer windows, Notepad, lots of others, etc.

    I have the latest version of the intellipoint software installed, I tried half of the list of the mouse in the intellipoint mouse settings to see if one of them would circumvent this problem. I tried to adjust the speed of scrolling. I tried to completely uninstall intellipoint and using the basic HID driver. I tried to install several drivers of microsoft mouse, even technically incompatible ones such as the USB intellimouse optical driver - it worked, but scrolling was fubared, although above warpspeed scrolling that's happened on the slightest movement of the scroll wheel to instead of having to do it turn very quickly - that in these problematic games if normal scrolling in applications was very good.

    I tried 2 different versions of intellipoint, 7.0.258.0, and 7.0.280.0, which were published on 08/05/2009 and 10/16/2009, respectively.

    In addition, this windows 7 install was clean, not an upgrade. My previous OS, vista 64, worked well with this mouse. My dual boot linux/Windows XP system works very well with him, even installed neverwinter nights 2 to ensure.

    I unfortunately approach the end of my mind here and would really like to not have to shell out money on a new mouse to solve what seems to be a software problem, when it has me well served for nearly 7 years = P

    Does anyone have any suggestions? Please help (=

    EDIT: Dug up from this article, seems closer to what I feel

    http://support.Microsoft.com/default.aspx/KB/828675

    The workaround solution suggested, to change device connected to a device not tiltwheel, kind of work. Unfortunately, the sensitivity of scrolling in my affected applications are extremely high, if I do this - instead of having to turn the wheel like a madman, a shake back and forth sends the device flying completely inside or outside. Whatever it is, it sucks.

    Hi Arnham,

    Welcome to Microsoft Windows 7 answers Forum!

    Since the mouse works well with applications other than these two games, so it might be a compatibility issue with the game.

    You can check with the Publisher of the games on this issue and see if there are any availbale patches for the game.
    You can also check the seetings mosue and keyboard of these games.
     
     
    It will be useful.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum

  • The mouse scroll wheel stopped working after windows updates

    I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

    I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

    In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

    Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

    Thanks for any help,
    A.J.

    Hello

    What is the number and the model of the computer?

    I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

    Method 1:

    Step 1:

    Update driver mouse

    a. click on start.

    b. click on Panel.

    c. using the drop down next to the opinion of: in the upper right, select large icons.

    d. click on mouse.

    e. click on hardware tab, click the Properties button.

    f. click on the driver tab, click set to update driver.

    Step 2:

    Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

    http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

    Method 2:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Method 3:

    The problems with the mouse button or scroll the parameters

    http://support.Microsoft.com/kb/303091

    I hope that helps!

  • Wireless Mouse scrolling wheell 5000

    Right now the wheel scrolls Ahmed smooth.  I used the scrolling to "click on" animation.  How can I change my movement of scrolling?  Thanks for the tips

    Christinepge,

    Try these workarounds to these links,

    http://techietalkz.com/2011/04/10/how-to-workaround-for-Microsoft-Wireless-Mouse-5000-scroll-wheel-issue/

    The problems with the mouse button or scroll the parameters

  • I want to Ctrl-zoom in CS6, Alt-zoom - with the mouse scroll wheel...

    Hello!

    Is there by chance a way to change the entries and outzooming in InDesign CS6 to be with the Ctrl key instead of the Alt key? When you use the mouse to zoom scroll wheel, I mean.

    I used to press Ctrl and scroll the wheel to zoom in and zoom out, and now I'm too old to learn using Alt + key instead, that it is impossible, the tracks in my head to use Ctrl is too deep. Cannot be erased or replaced.

    Or is there maybe a way to make the wheel to zoom in and out without stroking any key?

    James

    No possibility to change the zoom keys. Here's another way to zoom in and out.

    Use Ctrl + space, and then click the mouse to zoom in

    Use Ctrl + Alt + SPACEBAR, and then click the mouse to zoom out

  • The mouse scroll wheel does not correctly order of fields of Photoshop

    Hi guys,.

    Some general info:

    1. I have Logitech Keyboard K800 - it have its own receiver

    2. I have mouse Logitech (MX1100) - it has its own receptor

    3 Photoshop CS6 x 64-latest updates

    4. Windows 7 x 64-latest updates

    5 set point - latest version

    6. more than system information (please let me know if I should post the entire text of popup Photoshop System Info):

    Adobe Photoshop Version: 13.0.1 (13.0.1 20120808.r.519 2012/08 / 08:21:00:00) x 64

    Operating system: Windows 7 64-bit

    Version: 6.1 Service Pack 1

    System architecture: Intel CPU Family: 6, model: 10, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3, SSE4.1, SSE4.2, HyperThreading FP

    Physical processor count: 4

    Number of logical processors: 8

    Processor speed: 3410 MHz

    Built-in memory: 16342 MB

    Free memory: 9098 MB

    Memory available to Photoshop: 14718 MB

    Memory used by Photoshop: 90%

    Tile image size: 128K

    Image cache level: 4

    OpenGL drawing: enabled.

    OpenGL drawing mode: Advanced

    OpenGL allows Normal Mode: true.

    OpenGL allows Advanced Mode: true.

    OpenGL allows old GPU: not detected.

    Video card provider: NVIDIA Corporation

    Renderer videocard: GeForce GTX 560/PCIe/SSE2

    Display: 1

    View the limits: = top: 0, left: 0, bottom: 1050, right: 1680

    Video card: 1

    Graphics card: NVIDIA GeForce GTX 560

    OpenCL Version:

    Driver version: 9.18.13.1090

    Driver date: 20121229000000.000000 - 000

    Video card driver: nvd3dumx.dll, nvwgf2umx.dll, nvwgf2umx.dll, nvd3dum, nvwgf2um, nvwgf2um

    Video mode: 1680 x 1050 x 4294967296 colors

    Legend of the video card: NVIDIA GeForce GTX 560

    Memory: 1024 MB

    Texture size video Rect: 16384

    Serial number: 92298292820550253494

    The application folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64-bit).

    Temporary file path: C:\Users\kckfm\AppData\Local\Temp\

    Zero Photoshop has async I/O active

    Scratch the volumes:

    F:\, 685.6 G, 198.8 G free

    Required plugins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Required\

    Main Plug-ins folder: C:\Program Files\Adobe\Adobe Photoshop CS6 (64 Bit) \Plug-ins\

    Additional Plug-ins folder: not defined

    Some other info:

    You know that you can control the fields of Photoshop http://screencast.com/t/ApVseKYRxz with the mouse wheel. Quite handy indeed. Just click on the field and spin the wheel and change the values.

    The problem:

    My mouse wheel is unable to control the entry boxes in this way. I select the field, spin the wheel and nothing happen. When I turn it faster a couple of times, that values are changing - odd ha? Scroll normally - don't change, scroll fast change. But to scroll quickly is not an option because I can't change the values slightly in small increments... There is a bug really...

    What I tried and did not work:

    1 restarted Photoshop

    2. connect / disconnect and change of the different receivers two USB slots.

    3. last Reintalling drivers SetPoint (after uninstalling I run ccleaner)

    4 put the logs all settings by default (because I specifically programmed some MouseKeys to Photoshop).

    5 install earlier versions of SetPoint drivers.

    6. set my UEFI BIOS to default values.

    7 restart the BIOS to load all the drivers again, but still no luck

    (the last think I did is to reinstall Photoshop)

    What I've researched so far:

    1. when I restart the computer and run Photoshop it works perfect HA! , but after a few seconds it is not words again...

    2. when I stop the SetPoint software, when I stopped it, it word perfect.

    3 when I unplug the keyboard receiver it word perfect, but I have no keyboard :)

    4. everything works perfectly in Illustrator and After effects.

    5 also, I noticed that when I CameraRaw images scrolling - http://screencast.com/t/xKnn6cY9 the I scroll more difficult and more difficult to achieve - spin the same problem.

    6. also in photoshop and bridge scrolling here - is quite smooth and works perfectly - http://screencast.com/t/75IXMG6Zria

    Perhaps the most important part - when I start to experience the problem:

    I had the same setup, same everything and everything worked well.

    I have installed the SSD drive, reinstalled Windows (same as before), updated my UEFI BIOS. Installed Photoshop and set point and problem began.

    Posted same request to Logitech, but you want to ask for help too.

    Thank you!

    Hi all

    I found a solution.

    1. uninstall your current driver of the set value.

    2. run CCleaner - http://www.piriform.com/ccleaner

    3. download an older version of setpoint - http://www.oldapps.com/setpoint.php

    (I used the SetPoint 6.15 software (x 64), I tried 6.20 6.32, 6.50, but no luck)

    4. now, all right!

    Thank you!

    Someone can it mark as resolved? Thank you!

    SK

  • The mouse scroll wheel does not.

    Original title:-mouse wheel stops

    Hello

    In recent weeks, the mouse wheel stops working after a few seconds, when clicking to the left or right, it works again for a short period.
    I've updated mouse driver win 7, changed the question even the mouse. Its in all the applications I use, ms, so many others.
    Hope someone has an answer.
    See you soon

    Hello

    Made the exercise of boot minimum and found the service which double clicked, gladinet. Order the service.
    Thanks a lot for your help. The support page is also very clear.
    Really appreciate your help
    Take care

  • Because the microsoft 5000 mouse scroll wheel have a side a click?

    I just bought the Microsoft Wireless Mouse 5000.

    I've looked everywhere but can't find nothing to explain how all the buttons work on the mouse. Nothing came with the unit and I can not find this simple information on your website.
    Can you please direct me where I can get this info or you can give it here?

    Click here for a manual and the last download IntelliPoint:

    http://www.Microsoft.com/hardware/en-us/p/wireless-mouse-5000#support

    Be sure to choose your version of Windows before you download Intellipoint. Most of the Intellipoint statement statement, apparently. TDS shows the inclination of the wheel allows horizontal and vertical scrolling, but which can be changed to in Intellipoint.

    SC Tom

  • Logitech k400 touchpad scrolling (and scroll wheel works does not in general)

    I use Firefox Beta 19 for Android on a mini MK808 PC (but this also applies to other devices when using any kind of keyboard/mouse combo external;) I tried also with a Tablet Motorola XOOM 2 Media Edition with similar results).

    My keyboard is a Logitech K400 with a touchpad. It must scroll the page when we slide down/up with two fingers. The feature does not work in Firefox; Instead, I have to hold the mouse button and drag a finger. The gesture of two-finger scrolling works with Chrome and the browser of stock on this device, this issue should be repairable. It's a little annoying because Firefox is differently from other applications.

    In addition, during this test with another real with a mouse wireless keyboard/mouse combo I found that the mouse scroll wheel does not work. Again, it works in Chrome, so it is a behaviour Firefox only. (In fact, it makes perfect sense, because scrolling with two fingers to the keyboard Logitech is to emulate the scroll wheel). This is actually good news, because now I'm sure enough many users will be offended by this bug and it should be fixed.

    Note: in case this information is useful, the scrolling mouse work on Firefox start page with thumbnails of the most used links, but not on the other pages.

    Added: Find the bug: https://bugzilla.mozilla.org/show_bug.cgi?id=686228

    Apparently, there's a difficulty, but when he reached the beta channel?

    Yes! He works in Aurora! Even if for some reason, the logic is opposite to that of Chrome (scrolling down moves the page down in the window instead of the top). I can live with that.

    Edit: well, it works partially in Aurora. Scrolling of the Mouse/touchpad does not work on pages that have fields independently scrollable (for example, the web interface of Tweetdeck with different columns) or the parts that are supposed to be stationary. I hope that (and reverse the direction) will be fixed later.

Maybe you are looking for

  • Firefox does not take into account compatibility of Windows 8 for screens high resolution.

    I recently tried the Windows 8.1 Overview, but then restore my machine Windows 8 again. Before that, the first time I installed Firefox, it ran at low resolution, if the toolbars and the content appeared huge and blurry. I fixed that with the disable

  • Network/Ethernet Controller / PCI Device / controller of Bus required SM - HP Pavilion g4 - A1Z04UA #ABC

    Hello Model number: g4 - 1264ca Product number: A1Z04UA #ABC After reformatting my laptop, I find that I'm missing 4 software, affecting to connect to wi - fi. Need help to find the drivers for the model above; number Ethernet controller Network cont

  • HP LaserJet Pro P1606DN compatible w / Airport Express?

    I'm going to buy a new Mac Pro and would like to be able to print wireless to a laser printer. I like the HP LaserJet Pro P1606DN, but this isn't a printer wireless, itself. I understand after talking with a representative from Apple that a printer n

  • EzVPN and XAUTH

    A hardware IOS with XAUTH client enabled on the client and the server requests a user name and password, which must be entered manually via cli. Is it possible to store the user name and password locally on the client of equipment for xauth phase rem

  • A question of router router vs

    Hye, sorry for the newbie question. When having a small bussiness composed of ~ 40 clients that I want to connect to one of these two routers ' router RV042G or a tp-link WR841N. On the other one I should get and why? Thank you