Mouse Touchpad no longer works correctly

Similar Questions

• Synaptics Touchpad no longer works correctly

  Hello Internet!

  Hear my fate and tremble: I recently updated my drivers from the official manufacturer website Synaptics touchpad.  Before the update I could press twice on the upper left of the touchpad to enable and disable the touchpad.  It is a convenient feature that I have grown very fond of.  However, after the update this feature no longer works!  I'm so devastated...  I really enjoyed watching the pretty light outline of my touchpad to turn to a hurt red when it has been disabled.  I suppose I could return the drivers back to their old form, but I wanted to check if anyone knew a separate fix so that I could have as well the new drivers and the old features that I loved so much.

  My model number is: A6Y49UA #ABA

  My operating system: Windows 7

  Thanks for your help, I remember you when I am the dictator of the world.

  Hi @El-Nacho .

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I see that you updated your driver from the manufacturer's website.  HP recommends that the drivers listed on the HP driver page.  These drivers have all been tested and known to work properly. When you install the drivers of the manufacturing site, they may or may not work properly with your laptop.  Can of OEM and sometimes change a driver so that it works properly with your exact laptop.

  Download or update of software and drivers for HP computers

  If you don't have a problem with the old driver, I suggest you do a roll back driver.

  15.3.11.0 is the version recommended for your laptop and Windows 7.

  Here is a link to the driver download page if you need it. HP Pavilion dv6-6c10us Entertainment Notebook PC Drivers

  Good luck!

• Mouse pads no longer works on laptop

  My HP laptop mouse pad stopped working while he was a little older than a year. The drivers are installed, a plug-in works mouse. My HP Tower is over 9 years & runs like a champ, but my laptop is horrible. By completely replacing the hardwear, is there anything else I can do?

  Short of taking it apart and replacing your touchpad is your only choice to operate. "Mouse pads" strange that it is usually called the Touchpad of what I know.  If you tried to uninstall the driver, and then reinstall and unresponsive, it would be a sing that the Touchpad no longer works. But since we have no history of usage it could have failed the liquid is spilled on him causing his failure as well. Otherwise, you'll have to disassemble the Palm to get it on the touchpad and replace it or some requires that you replace the complete plamrest'en as part of the palmrest Touchpad.

• Touchpad no longer works after the clean boot

  Own, I started my laptop today, following the steps on http://support.microsoft.com/kb/929135. After the first reboot in clean boot my laptop touchpad scroll bar stopped working. I can now scroll using only the arrow, or quiet mouse clicks on the arrows at the end of a ScrollBar to the screen. In addition, I can't select any text with my touchpad now. All this happened after the boot process. What has gone wrong? How to fix?

  Original title: scrolling Touchpad no longer works after the clean boot

  Hi lauranne.

  What is the brand and model of the computer?

  I would like to put the computer into normal mode and check if your able to use the touchpad.

  See the section "How to reset the computer to start normally after a boot minimum troubleshooting"

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  If you still have questions, please refer to the article to give below, and follow the instructions.

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-keyboard-problems-in-Windows#V1H=tab01

  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you more

• My MOMENTUM PS/2 port touchpad touchpad does not work correctly.

  I'm using acer aspire laptop v3. My MOMENTUM PS/2 port touchpad touchpad does not work correctly. It stops working sometimes and automatically return to the action after a while. When he stops working, pointer can be moved but just click, left click, scroll etc. do not work... Help, please...

  Hi Anoop,

  This problem may occur because of incompatible or corrupted touchpad drivers. I suggest you to uninstall and reinstall the drivers and see if it helps.

  To uninstall the device drivers, follow these steps:

  a. drag the mouse down to the left and right click on the Start icon.

  b. Select Device Manager.

  c. right-click on the device driver, and then click Uninstall.

  Check out the link to install the drivers:

  http://www.Acer.co.in/AC/en/in/content/drivers

  It will be useful. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• Mail no longer works correctly

  Hello, my e-mail no longer works correctly. [Air MacBook OS X El Capitan 10.11.5]

  It would not accept my password of account for a reason, so I removed my server provider and then he added through accounts.

  It worked, but mail is now different, and every time I open it, it will re - download about 1300 messages from this account.

  Does anyone know of a way to get it to work as it allows?  Thank you.

  Look at how different?

• Satellite C70 - A - 15 d - Touchpad no longer works

  My touchpad no longer works. Windows 8.1.

  New drivers can not be installed. MOMENTUM: error message bad touchpad. Synaptics: obviously empty zip file after downloading.

  Any idea where I can get the zip file of work?

  Are there function keys that enables / disables the touchpad?

  Thanks for the tips!

  + The message was edited: model number added to the object.

  many answers but we cannot reply if we do not know what model of laptop you have, so please the exact post model name of your laptop by Satellite.

• Satellite A350-212 - touchpad no longer works

  Hi all, I have some problems with my FN keys, my touchpad no longer works, in addition to this, when I press the FN key, I don't see any icon on the top of the screen... Two days ago, all this did not work properly... An error is given by the program called Tossiba assist, its written exactly this way: this system cannot use accessibility... Could you please help on this issue?
  My operating system is Windows vista 32-bit (service pack 1)

  Finally, sorry for my English if I make mistakes, it is not my mother tongue...

  Thanks in advance

  Try to restart flash cards.
  Start > all programs > Toshiba > utilities > restart Flash Cards

  After doing this press FN button several times to see if Flash Cards are still on the top of the screen.
  If you see Flash cards again use the FN + F9 key combination to activate the touch pad again.

• Touchpad no longer works after update BIOS on Satellite A500-1GL

  Hello world

  I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

  Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
  After that Windows 7 (x 64) started the touchpad no longer works...

  I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

  I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
  But unfortunately it still doesn't.

  Now, I'm out of ideas, can anyone help?
  Is there a chance to get the older version of BIOS to downgrade it?

  Thanks in advance ;)

  Hello

  It seems strange that after update Bios touchpad no longer works.

  > Is there a chance to get the older version of BIOS to downgrade it?

  To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
  The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
  Advice for the future; Do not touch the running system.

  Good luck!

• Split 13 x 2 touchpad no longer works

  I have a new split of HP 13 x 2. The touchpad no longer works. This is the latest driver Synaptics Touchpad (17.0.10.9). I'm under WIN 8.1. I have to close the session and then again for the touchpad to start working again. Any suggestions?

  Took a little digging on the forum but found this solution that worked for me in solving the touchpad freeze problem:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/split-X2-touchpad-problem/m-p/3361845#M48265

  Hope this works for you.

• The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly

  Original title: problem with the shortcut "xuiexi.scr".

  When I try to open my files I get a notice that says: PROBLEM WITH SHORTCUT.  The item 'xuiexi.scr' that this shortcut refers to has been changed or moved, so this shortcut no longer works correctly.  You really want to remove this shortcut?  YES / NO

  What can I do to recover these files.
  Thanks in advance for any help.
  NW

  Hello

  (1) remember you to make changes to the computer before the show?

  (2) is that limit this issue when opening specific programs?

  You can perform the following methods.

  Method 1: I suggest you to run the Microsoft Fixit article.

  Fix broken desktop shortcuts and common system maintenance tasks: http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

   
  Method 2: Run Virus Scan

  You can download Microsoft Safety scanner, which provides on-demand scan, and remove viruses, spyware and other malicious software. It works with your current antivirus software.

  See the link below to download Microsoft Safety scanner on the system.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note:
  The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  WARNING:
  The data files that are infected can be cleaned by removing the file completely, which means that there is a risk of data loss.
   
  It will be useful.

• A website no longer works correctly. O ' k with IE. Recent updates FF18, Flash 11.5.502.146 & Win 7 (64-bit)

  www.Dallastown.NET website of the school is no longer loading the images/info correctly. Works well with IE.

  To maneuver around some by right click and open in a new tab. "Select a school" menu drop-down is a specific problem. Times many clicks of the mouse will open the page correctly. Always run into problems without response with a click or a lack of information.

  A number of updates have taken place recently, not sure where there is problem. I currently have Java disabled, but tried with it activated and no help. Uninstalled and reinstalled FireFox (18), no help. Thinking maybe a problem with FF 18 and Adobe Flash, but don't know what to do.

  I appreciate any help you can offer.

  Problem has been solved, the website now works properly. Suspect an update of FF 18.0.0 to 18.0.1 or something on the site solved the problem

• Satellite C50 - touchpad no longer works

  Hello.

  Can someone shed light on why my mouse touchpad and buttons should stop working?

  I have a wireless external mouse plugged in via USB but still since the purchase.

  I lived all the settings and it has not been changed when OFF another device in use, so I am confused.

  The control panel tells me it works correctly, but Oops, what it is not!

  > I lived all the settings and it has not been changed when OFF another device in use, so I am confused.
  Maybe the touchpad has been disabled?
  Have you checked if you can activate the touchpad by using the key combination FN + F9 (on some models, this function has been replaced by FN + F5)?

  You can also go to Panel of-> mouse-> device settings tab
  You will find a pointing device option disable internally called when an external USB device is attached.
  Make sure that the option is disabled.
  Details: http://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

  In case this does not help, I recommend reinstalling the touchpad driver

• Satellite L300 - 26K - after update BIOS touchpad no longer works

  Hello

  as recommended by tempro, I have updated the BIOS to the version 2.1 to 2.2 (windows). After the reboot, incl. touchpad. doesn´t advice working. In the bios, touchpad is enabled in the system, it said unit works correctly. FN/F9 does no effect. Reinstall the synaptics - no effect - drivers still dead.

  Satellite L300 - 26K
  Using Vista 32-bit home

  How can I restore BIOS to 2.1 again? (if I try the V2.1 windows-bios utility he says that it is always installed - so I can't downgrade by this easy way)

  Please help - I need my laptop without external mouse (this works)

  your

  Oliver

  Post edited by: enigmo

  Hi enigmo,.

  I can t imagine this happening due to the update of the BIOS. Have you tried to reinstall Windows using the Toshiba Recovery disk?

  This BIOS downgrade is possible only to an authorized service. Technicians can install all versions because they have these special tools to do a downgrade.

  On the Toshiba site, you can find a list of them. Just give the guy and ask for it. They will help you! :)

• mouse/Touchpad does not work after logging in

  I have a Toshiba Satellite with Windows 8, he bought this way, I've had it for about a month, were execution of updates when suggested, there are 2 accounts admin and has a guest. I am currently on the second admin account and the question that is at hand is not the case here, it only happens on the main user/administrator account. When the computer is on the login screen the mouse pointer is visible and the touchpad works, but once I log on the account (even once, it happens only on one account) the Tablet seems to no longer work, and there is no the mouse pointer on the screen. I tried troubleshooting as suggested in answers to similar questions, but he doesn't seem to find the problem. The question was raised today, just before I decided to do an update, once the problem I tried the update, returned a few hours later and the problem is still there. What do I do? Haha, I can not afford to buy a plug-in mouse, or what ever and don't have one currently.

  Hi Jessica,.

  What is the model of your laptop?

  You can find the drivers on the link below.

  http://support.Toshiba.com/

  If you don't get the drivers for Windows 8, then you can try to install drivers available for the earlier version of Windows in compatibility mode.

  http://Windows.Microsoft.com/en-us/Windows-8/older-programs-compatible-version-Windows