Similar Questions

• Accelerometer reading is not being updated smoothly when you move your device on the left to right or right-left in the Horizontal plane

  I'm developing an app for BB 10 devices using the accelerometer. I tested on a BB 10 Dev Alpha device.

  When I move the camera in LANDSCAPE MODE on the left to right or from right to left direction in the Horizontal plane, the accelerometer readings are not updated day smoothly as they do in other directions.

  In addition, the update in the Vertical plane is not as by expectations, is not through with Android, Iphone or other blackberry devices.

  I even checked BlackBerry example project of the accelerometer. It has the same problem. Has anyone else facing the same problem? Is there any solution for this?

  Accelerometer reading is not updated because the example provided on github at this rate of accelerometer is set to very high. code: ACCELEROMETER_RATE = 25000 which is high. As directed by their document

  Is the rate at which the data from the updates of the material. The rate of update of the material
  is defined below using sensor_set_rate. If we set this to 1000, then it properly updated and gives the readings that we arrive on the java BB device.

  Replace the code: ACCELEROMETER_RATE = 1000, then it updates corretly.

• Problem blackBerry Smartphones with device update the Version of the software 7.1.0.746 for BlackBerry Torch 9810

  I received an error when you try to update the software version of 7.1.0.391 to 7.1.0.746 device

  Computer rebooted, turned off mass storage device, reconnected phone several times, but always the following error.

  !  There was an error in updating your software.

  Application loader failed to connect with your device. Restart the process of loading, reconnect your device and try again.

  Encountered unknown error [A:0 x 00000001]

  The phone will reboot with the old software and everything works fine.   I guess that its better to wait for a temporary fix of the program or simply not load the software at all.   Does anyone else know this problem?  Cheers, EJPM

  Just complete the update on the Web instead of the update of computer desktop and everything worked well. NOTE: It does not take very long.

  Then, maybe there is a bug in the update of desktop?     anyway, if anyone has the same problem try the update the Web.  I hope it will work for you.  Cheers, E

• After installing the runtime Visa my mouse moves with COM data

  I'm sorry, I don't know anything about Labview I use prepared GUIs.

  After installing the runtime Visa540 my mouse moves whenever I get the COM1 data. How can I turn that off?

  You use a USB-serial adapter?  Has been sending peripheral data when you start the computer to the top?  The device sending the data while the USB adapter has been being connected?

  It's probably a Windows problem.  If you connect a serial device (adapter USB-serial anytime or a build/PCI serial port at startup) and the device sends data, then Windows think that standard equipment is a mouse.

• Update of the "couldn't find any output device" after the Sierra

  I've updated my iMac (model 14.2) of OS X El Capitan with macOS Sierra yesterday. The update went smoothly except that once the complete update, the Office and I logged the volume in the menu bar icon is grayed out. I immediately opened settings, assuming that the update had deselected somehow my default audio output device (a pair of external speakers, in this case). But when I went on the audio menu, I was surprised to see "not found any output device.

  I have looked around a bit and have not yet found anyone else with this problem. I became so desperate to get my audio that I even tried installing 3rd party 'Voodoo' audio driver, but it gave me the option for "Digital out (HDMI)" which is of no use to me, I have the mac connected to a TV via a VGA adapter and it does not have a HDMI adapter. One thing it stated however is that somehow during my got deleted and never replaced Applehda driver upgrade, or install a driver on 3rd wouldn't have added of output devices to list (albeit dimmed those outside and totally dysfunctional). So at this point, that I am at a loss, I know not how to replace the driver, where or how I would install it so any help is greatly appreciated. Danke!

  Hi Alison E.C..

  Thanks for the upgrade to Mac OS Sierra! I see that you have lost your audio output device once you upgrade. No worries. Great way to try to get your audio works using another audio driver. Given that this has not solved the problem, please try to reset the NVRAM.
  

  What is NVRAM?

  A small amount of memory on your computer called "non-volatile random - access memory" or NVRAM, stores certain settings in a location that OS X can access quickly. Settings that are stored in NVRAM are dependent on the type of Mac you use and the types of devices on it.
  Information stored in the NVRAM may include:
  The speaker volume
  Screen resolution
  Selection of boot drive
  These latest panic the kernel, if applicable
  If you encounter problems with these features, you may need to reset the NVRAM on your computer. For example, if your Mac starts up from a bootdisk other than that specified in startup disk preferences, or a question mark icon appears briefly at the start of your Mac.

  How to reset the NVRAM on your Mac.

  This should have your internal audio device showing as it should be under your settings in the system preferences. Please use the Apple Support communities to post your question.

  Have a great day.

• How do update you the "cloud-copy" of bookmarks in sync-ed, etc. (assuming that 'sync' only allows you to synchronize your device with the cloud

  The machine used for the first set up a sync account seems to provide the cloud 'Captain' at the time of installation. Subsequent operations 'sync now' any device seem to download this cloud 'master' on the devices. But how to update the 'master' cloud and it can be done (transferred to) by the device of your choice?

  Hi Igbortaz,
  This ONLY happens when you join the account the first device. After that, all devices connected to the account synchronization and merge with the stored then replaces the local profile. Unfortunately, at the moment it doesn't have a function to choose the device that is the master.

  And before any changes, I recommend you make a backup of your profile.

• Unknown device on the Satellite A100-153, after BIOS update to 5.1

  ACPI\TOS1901 * TOS1901<--- this="" is="" the="" unknown="" device="" after="" bios="" update="" to="" 5.10="" on="" my="" satellite="" a100-153="">

  Vista now shows it in as unknown device manager; the TOS1900 showed up too, but after installation of Toshiba Value Pack for Vista, it went.

  Help, please. WHICH IS: ACPI\TOS1901 * TOS1901

  Hello

  ACPI-> Advanced Configuration and Power Interface
  ACPI defines hardware and software interfaces that allow focus on the OS configuration and power management to enumerate and configure motherboard devices.
  For example: ACPI is necessary for the standby and hibernation mode.

  Now your question; the new BIOS has been updated and configured to using VISTA.
  It seems that VISTA was not compatible with the previous version of BIOS because the ACPI interface. Now you can install Vista on the laptop, but it seems that you need a driver. Possibly new chipset driver version might help. But as you probably know, the drivers are not available at this time. Unfortunately

• iTunes does not recognize my devices after the last update

  iTunes does not recognize my devices after the last update. Has crossed all suggestions from the support page (uninstalling/reinstalling driver USB, remove Lockdown folder and so on) but still no joy. iPhone continues to ask if I want to trust to the connected computer, responding 'Yes' has no effect.

  Help, please

  Thank you

  Cyana

  Found this solution here:

  Re: Does not recognize devices in iTunes on PC

  works very well

• OfficeJet Pro X451dw (CN463A): updated the Firmware says X451dw "EC Firmware Updater does not contain updates for your device."

  I'm trying to update the firmware on my HP Officejet Pro X451dw (CN463A), but the firmware update fails with the error "This Firmware Updater does not contain updates for your device." More precisely:

  1. With the help of EWS, I confirmed that my current firmware is very old (it lists the firmware version of BWP1CN1315FR, which means 1315FR, right?, dating almost the time I bought the printer about 3 years ago).
  2. I downloaded the firmware ("OJP_X451dw_R1640A_updated.dmg") was last updated, copied 'HP Firmware Updater' in /Applications and then he ran.
  3. It shows my printer in the Device Discovery list. I selected and clicked on continue.
  4. He thinks for a while, displaying "recovery information...". »
  5. After a wait of 30 seconds (approx.), it displays "EC Firmware Updater does not contain updates for your device."

  Any suggestions?

  You're welcome @justkwin.

  Here is the utility of a Mac computer:

  FTP://g4u0180.Houston.HP.com/FTP4/pub/softlib/software13/printers/pentane/OJP_X451dw_R1548A.dmg

  Kind regards

  Shlomi

• have we not back up our data to an external device before the update to windows 8.1

  have we not back up our data to an external device before the update to windows 8.1.

  update to windows 8 8.1 will affect the data in the laptop...

  @swati90

  If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

  If you're updating with an ISO will always give you the opportunity to register personal files.

  Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

• USRP RuntimeError: Please update the firmware and FPGA images for your device.

  Hello

  I have an Ettus USRP N210 with a surfboard RF WBX running FPGA firmware version 4.

  2009 LabVIEW and NOR-USRP 1.1

  When I try to run one of the USRP VI OR as devices to find it displays the following error code:-1074118627

  "niUSRP Devices.vi finda length or configuration error has occurred."
  Code: 1440
  Details: RuntimeError:
  Please update the firmware and FPGA images for your device.
  See application for USRP2/N-Series notes for instructions.
  Compatibility of the Protocol expected number [7-11], but received 12:
  The version of the firmware is not compatible with the host code generation. »

  I can communicate with unity on Linux using UHD machine and the utility Configuration NI USRP can see the device, but firmware update is not possible, probably because of my IP ending in 221. Latest firmware Ettus was recharged via Linux UHD.

  Looks like my firmware again? I am not allowed to download the old versions of the FPGA firmware.

  Can someone help me with this problem please?

  With respect,

  -Sigurd has.

  Hello Sigurd,

  The NOR-USRP driver requires a specific firmware and FPGA image to be downloaded to the USRP to exploit.

  You can use the utility of Configuration USRP download appropriate firmware and FPGA image to the usrp.

  This knowledge base article will help you: how update the Firmware and FPGAS Images for N2xx and NI 292 x USRP

• Update of Audio devices while the program is running

  Hello

  I want to connect to a device audio all in a labview VI is running. When I do, the audio device does not appear in the list of audio devices. Will there be any node of activeX or another possibility to refresh the audio in labview devices, while a VI is running?

  I use Windows XP and LabVIEW 2010, but I think that an upgrade for 2011 would not solve my problem.

  Hi Angelica,.

  just spoke to a colleague on the issue and we have now resolved. The solution are VI references and call forwarding.

  Take a look at the example in the attachment. The use of this piece of code, the 'get Num Devices' function (as an example for all other functions that you want to use) is reloaded each time it is called, resulting in the numeration of device updated when executing.

  Good luck using it and best regards,

  Benjamin

• I no longer receive windows updates - there is no any version of the Runtime

  original title: contains no DURATION (2nd revision: I installed another version of AOL.) Since that time I no longer receive windows updates.)

  I installed another version of AOL. Since that time I no longer receive windows updates.  I tried to install the autumatic updates and the "fix it", but my computer does not contain any version of the Runtime.

  Hello

  
  Put the computer to boot and then look for the Windows updates and see if it helps.
  
  To help resolve other issues, and error messages you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
  
  Note: Follow step 4 to reset the computer to start as usual after the boot process.
  
  http://support.Microsoft.com/kb/310353
  
  Hope this information helps.

• now, I have no audio device, tried to download the realtek drivers but failed: class installer has refused the request to install or update the device?

  Original title: the class installer has refused the request to install or update the device?

  now I don't have a device audio, reinstalled windows xp with recovery disk, tried to download the realtek drivers but failed.

  Hello

  1. What is the status of the sound card in Device Manager?

  The following article might be useful: no sound in Windows

• update from xp to vista and lost my portable device in the process. How can I get that back?

  update from xp to vista and lost my portable device in the process.  How can I get that back?

  Hello

  Check with the manufacturer of the laptop to the latest vista drivers and software for your model

  If this does not it, contact them and ask them if they support your webcam when using vista