Movie Maker error: cannot be used because the audio hardware is not found
I am trying to use Movie Maker on my lap top, but get the following error: Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.
I don't know what is missing, please help
Hello
· Were there any changes made on the computer before the show?
I suggest you to update the audio driver installed on the computer. You can visit the link below for the procedure: how to manage devices in Windows XP: http://support.microsoft.com/kb/283658
Tags: Windows
Similar Questions
-
How to find the original on my windows 10 PC file?
The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parents, or the reader, records it feeds has been a change in the letter of the drive or you have moved a non-portable library to a different path (see make a split cell library for more details). It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.
Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.
In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.
If another application like Windows Media Player has moved/renamed files, or the library was moved from OS X to Windows, then chances are that subtle differences in naming strategies it will be difficult to restore the media to the precise path that iTunes is pregnant. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.
If you want me to try to provide specific advice, please post back the following details:
- The location of the media file under Edit > Preferences > advanced
- The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
- The real path to the file which you gave 2 details.
TT2
-
Windows Movie Maker cannot be used because the required audio hardware cannot be found on your computer.
Help, please.
original title: MM not working,.
Laughing out loud!
I found the awnser!It was two things,I have a dell and in some sort when I returned to XP SoundMAX Digital 7 Starter was deleted,.Then I got the thing plugged into the wrong entrance! -
Can embed you fonts in a pdf file after that the pdf has been created? I received a PDF of an another designer, made a few minor corrections, and now the printer cannot be used because the original pdf didn't have all fonts embedded. Any ideas?
Use the Acrobat Pro preflight!
To incorporate the missing fonts in Acrobat Preflight profile will incorporate the missing fonts in your PDF file assuming that:
(1) the fonts in question are installed on your system and
(2) the police themselves is not protected against the incorporation (they can at least see and print incorporation.
-Dov
-
Hello. I live in Brazil, Rio de Janeiro and already installed W8 Pro original Microsoft license.
When I need to use the event online Help Viewer, a reception this message - the event log online help cannot be displayed because the default browser could not be started. Class not registered.Help, please.Thank youCarlos.Hi Carlos,
Thanks for posting your query in the Microsoft Community Forums.
After the description of the question, I understand that you are not able to access the online help for Event Viewer.
1. do you receive an error message when you try to open the online help for Event Viewer?
2. who is the default browser on your computer?Method 1:
"The event log online help" her will bring you to the following Web page:
http://www.Microsoft.com/technet/support/ee/ee_basic.aspx
I suggest you try to access the above mentioned Web page to see if it works.
Method 2:
You can see the article mentioned below for how to set Internet Explorer as default browser.
Make Internet Explorer your default browser
http://Windows.Microsoft.com/en-us/Internet-Explorer/make-IE-default-browser#IE=IE-10
It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you
-
Original title: wall of fire is corrupt? Does not connect to internet
The "firewall settings window cannot be displayed because the associated service is not running" message, but then it won't access the internet or run the program. We have done all the steps listed here http://windowsxp.mvps.org/sharedaccess.htm, but nothing worked so far. Even re-installed SP3. Help, please! Thank you very much.
Hello
What happens if you disable the firewall?
Run the checker (sfc) system files on the computer.
SFC tool scans system files and replaces incorrect versions of system files by using the correct versions.
To run the System File Checker tool, follow these steps:
a. open an administrator command prompt. To do this, click Start, click principally made programs, Accessories, right-click Guest, and then click run as administrator.
If you are prompted for an administrator password or for confirmation, type the password or provide confirmation.
c. at the command prompt, type the following line and press ENTER:
sfc/scannow
The following article might be useful:
After you run Microsoft Windows AntiSpyware (Beta), you have problems with the network, or you receive an error message
http://support.Microsoft.com/kb/892350 -
I have itunes 12.4. When I try to add a new song to icloud music library I see the following message: "Genius results cannot be updated because the iTunes store does not recognize your iTunes library." He then ordered me to turn off Genius, and then turn it back on. There is no option. Othe impossible of access devices correspond to these songs via itunes. Any help would be appreciated.
Hello Subocz E M.
Thank you for using communities of Apple Support. I see that you had problems adding pieces and turn off Genius. I know how it is important to be able to add music to iTunes. I'm happy to help you.
Since you are being invited to turn off Genius, you can add music, please use the following information to resolve these two issues:
Turn on or off the Genius
If iCloud music library is enabled, you cannot disable Genius.
Choose file > library > Genius (toggle Genius).
Turning off the Genius Genius Genius Shuffle shuts and and the Genius Mix.
12 iTunes for Mac: use Shuffle Genius, Genius or Genius Mix playlists
Have an amazing day!
-
Windows Firewall settings cannot be displayed because the associated service is not running
I get the message 'Windows Firewall settings cannot be displayed because the associated service is not running' when I try to restart my windows firewall, followed: due to an unidentified problem, windows cannot display settings.
Can someone help me? I want to restart my windows firewall, which recentloy has stopped working.
Hello
No one program cannot be used to detect and remove any malware. Added that often easy to detect malware
is often accompanied by a much more difficult to detect and remove the payload. So much better to be too full now
than to pay a high price later. Check with them to an extreme exaggeration, and then run the cleaning only when
you are, of course, that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
the Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download it here.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Original title: oleaut32.dll xp
My system XP pro/sp3 does not start normally, without danger or with the original sys disk. I get a message
Isass.exe - Unable to locate component. This application has failed to start because the oleaut32.dll file not found. reinstalling the application may fix this problem.
However, I can't in the operating system to do a re-install.
Any suggestions?If c:\windows\system32\oleaut32.dll is missing, you will see messages like this:
Lsass.exe - Unable to locate component
This application has failed to start because the OLEAUT32.dll file not found. Reinstalling the application may fix this problem.If the missing file is the only problem, you might have to do a reinstall to fix.
There should be a copy of Oleaut32.dll in the c:\windows\system32\dllcache folder, so if you can get in the XP Recovery Console, you can just replace it - then you are going to have to start on something to do.
Once started in the XP Recovery Console, you must enter this command at the prompt:
Copy c:\windows\system32\dllcache\oleaut32.dll c:\windows\system32
If the file is not in the dllcache folder (it should really be), depending on your installation, this command can work:
Copy c:\windows\servicepackfiles\i386\oleaut32.dll c:\windows\system32
Answered in the affirmative if invited to replace any existing file.
I don't know what the Microsoft Support Engineer think that KB307545 or KB922371 will help you. I think that the MSE is just throw a few things to try and some links. You don't describe symptoms consistent with the need to use one of these methods. I would say the MSE has never seen this problem before, made no attempt to reproduce the problem, and has no idea how to fix this.
If your CD does not start in the Recovery Console, or if you don't know what kind of CD do you have to do a CD of XP Recovery Console and boot on it (no media XP required).
Here's how:
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that might have come with the acquisition of the system store.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
When you install ImgBurn, DO NOT install the Ask toolbar.
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:
After replacing the file, remove the CD and type 'exit' to leave the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
-
I recently started getting an error when you try to access my network drive. Attempt to fix I have also disconnected the drive and tried to reconnect. I get the error: error code: 0 x 80070035 the network path was not found
I am able to map the drive of all the other machines in the hold of the House (Mac OS X, Windows XP, Windows Vista). However, the Windows 7 machine continues to report the error.
I searched the internet for the microsoft Web site and answers and so far nobody seems to have an answer to the problem (and it seems to be a very common problem in Windows 7, based on the number of reports I've met in my search). I'm able to reach the reader through the IP address, but cannot connect in it (continues to re - ask for credentials and I checked the credentials I use are 100% correct).
The only significant event was the address IP changed on the remote disk. What that tells me, is that windows is not updated the name of the drive to the new IP address and confounds seriously on how to get the player passing the correct credentials.
I removed the protection against viruses (a suggestion said it was the cause), but it has no effect. Check my sharing permissions and so many different places that I could, but nothing has changed and all seems OK.
The problem is in Windows 7, but I don't know where all configurations "tricks" are on the (64 bit) OS - has been used for a 32-bit system. Where can I manually fix the DNS or DHCP parameter for the name of the drive?
SOLUTION
It's a problem with Windows Explorer in Windows 7 do not resolve the computer name target to its IP address. It is not a problem with the firewall or antivirus.
There is a simple workaround solution. Use the IP address of the target computer, not the computer name.
(1) find IP address that the computer target is. It is desirable to give a private static IP address to the target computer, for example, 192.168.1.10, so it does not change. Use the local windows help when you sit in front of the target computer to do this, if you don't know how.
(2) when you are sitting in front of the Windows 7 computer, you want to access the target computer, open Windows Explorer and in the address bar type------followed\\192.168.1.10 static address of the target computer, for example, and press enter
If the target computer uses the name of user and password sharing, after a few seconds, you will be prompted credentials. Enter the same username and password used to log on the target computer when you're sitting in front of it.
The target computer will be added to the list of computer network Windows 7, appearing as an IP address instead of a computer name. You can access his actions as if it was listed by name instead of the number.
That's all.
-
Error code: 0 x 80070035 the network path was not found.
Hi all
I have 2 systems. In one system, I installed Windows XP Pro SP2 and in another machine I installed Windows Vista Home Basic Edition. The two systems are networked. I am able to access and view the shared folder in Vista the XP system. But when I am trying to access folders in XP since Vista I get the below error:Windows cannot access \\hyd02Check the spelling of the name. Otherwise, there could be a problem with your network. In an attempt to identify and solve network problems, click on diagnose.Error code: 0 x 80070035 the network path was not found.
I did the settings below:(1) file and printer sharing are enabled in both systems.(2) firewall is disabled in the systems.(3) in the center of security and network, the network is private.and network discovery is enabled, file sharing is enabled, public folder sharing is turned on, printer sharing are enabled and protected by password sharing isOff, media sharing turned OFF.(4) the name of the task force in both the system is the same.Can someone help me solve this error...Thank youSylvie GHi Sylvie G
Thanks for posting on Microsoft Answers.
Are the same username and password on both systems?
What is the share name you are trying to do on the XP machine?
Let's say that the share name is music, you would get to it by typing \\hyd02\musicCan you do a Test PING since the Vista PC on the XP PC?
Go to a command prompt and type ping followed by the IP address of the computer XPPlease post back the results... Thank you Ken
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
network error 0 x 80070035 that the network path was not found.
I have problem of network with Win7 pro. When I click on my network folder links to my LAN I geterror 0 x 80070035 the network path was not found.
The network has been set up for 4 months, it includes 3 PC, so far the only problems have been minor, such that the network links, which restart a system endangered has been necessary to update the network and worked.
The 2 other PC can see and access each other and see and access PC Win7 Pro troubled, but troubled PC Win7 Pro can even happen to its own network without theerror records 0 x 80070035 the network path is not found, arise.
After hours of checking, I have found no resolution, but as I restored it the PC several times, sometimes service reappearing for a while.
In my search for possible causes, I opened the Device Manager with the selected hidden devices, under network adapters and found189 instances of card Microsoft 6to4.
I don't have 3 PC's networked! Anyone know if it is a normal number for Win7 or I found part of an anomaly.Any suggestions?
c.Maresca
Thank you for your comments.
In the search for a solution to my problem of network Win7 Pro, that I've been on all the settings you mentioned before that I posted my question and no problem, everything is as it is necessary to have a comprehensive network and the network was very good except the occasional missing links, which I described in my original post. The only addition to the configuration of PC from the network has been initially implemented has been automatic updates to update from Ms.
The good news is that, as I studied it to the maximum, I found 2 messages in the network forum Win7 which combined provided the solution for my problem with the network.
As I did research on it, I noticed that a lot of people have similar problems of network. I know that there are many reasons of connectivity issues, as well as the solutions are specific problems, but if other users of the network are affected by the problem of multiple card Microsoft 6to4 and local network error 0 x 80070035 that the network path is not found, the solution I found worked for me.
If you want to see more respond to this stream.
c.Maresca
-
Original title:
I'm unable to access an external drive that I have connected to a mac on my home network. I can access all the files on the mac itself, but when I try to connect to the external drive, windows 7 gives the error Code: 0 x 80070035 - the network path was not found. The external drive is set to share on the Mac, but Windows 7 always gives me error.
Hi Comicsancturn,
Follow the troubleshooting steps in this thread to solve the error 0 x 80070035.
Let us know if that helps.
-
Hello!
After the end of my second day of test error, I put this question on the table:
I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.
I confirmed that:
the RowData sizes and the ChannelNames are equal,
both spend the isarray = true test,
I change the order of the ChannelNames,.
I have reconnected/disconnected from the oConnexion every time, nothing has changed.
Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:
oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")
Call OpenSQLConnection
Set oRecordset = CreateObject ("ADODB. Recordset')
Call SelectWell
Call GetWellStateIDsData.Root.Clear
for j = 0 to ubound(oTables,1)sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
oRecordset.Open sSQLSting, oConnexion
Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
for i = 0 to orecordset. Fields.Count - 1
oFieldNames (i) = orecordset. Fields.Item (i) .name
next
oArray = oRecordset.GetRows (-1, 0, oFieldNames)
Set oGroup = Data .root .ChannelGroups .Add (oTables (j))oArray, oFieldNames arraytochannels
oRecordset.close
oConnection.Close
nextSub GetWellStateIDs
sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
oRecordset.Open sSQLSting, oConnexion
oArray = oRecordset.GetRows)
WellStateIDFirst = oArray (0,0)
WellStateIDLast = oArray (0, ubound(oArray,2))
oRecordset.close
EndSubSub OpenSQLConnection
Set WshNetwork = CreateObject
oComputerName = WshNetwork.ComputerName
oDB = "MX2. Player.DB ".
Set oConnexion = CreateObject ("ADODB. Connection")
oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
oProvider = oProvider & oDB
oConnection.ConnectionString = oProvider
oConnection.Open
EndSubAnother clue. If you check using DIAdem
Microsoft Windows Script Debugger
you are able to install the debugger in DIAdem.
It would potentially have shown that the command does not work as expected.
Sorry for the inconveniance
Andreas
-
Movie Maker error: cannot save the movie to the specified location.
When I wanted to save my movie on my computer, I received an error at 0%, it is said:
"Windows Movie Maker cannot save the movie to the specified location. Verify that the original source files used in your movie are still available, that the backup location is still available, and that there is enough available disk space, and then try again. »
There is nothing about it, I even 20 GB of free space, the video is only 1.24 MB. and files original source is always available.
Someone HELP me please! I use Windows Vista Home Basic.
original title: Windows Movie Maker 2.6 problems during the recording of movie files
There are to many free converters that you can
downloaded on the net, but for a few
MP3 files... There are free converters online.The following site may be worth a try:
Convert online
http://www.online-convert.com/Open the drop window in the field of Audio Converter.
Select... WMA
In the next screen, left click on the Browse button and
Navigate to the MP3 you want to convertLeft, click Convert.
When the file is converted will prompt you to
download it.
Maybe you are looking for
-
Generic bluetooth adapter HP 630 notebook PC window 7 ultimate 32 bit
Dear HP consulting Generic bluetooth adapter in Device Manager does not work and therefore bluetooth Ultimate de Windows 7 PC portable HP 630 32 bit It corresponds to the hardware as described in the device id USB\VID_03F0 & PID_311D & REV_0001USB\VI
-
2 power supply: voltage increment on one when the current research on the other?
OK, so I work with 2 power supplies E364X Agilent. I have a unit with a door and drain that I do apply power. With the door I am applying 1.5V & .3a current limit, the drain I do a request 9.5V & 1 has current limit. What I'm trying to do, is to incr
-
I am generating the signal using the module 9751 OR but couldnot understand. Could someone help me with some basic examples?
-
How to the instance of microsoft script editor debugging
How to the instance of microsoft script editor debugging
-
The instruction at "0x6280436a" referenced memory at "0x0a055284" memory could not write click on ok to terminate the program.