Movie Maker is compatible with films on the new AVCHD cameras?

Similar Questions

• in windows movie maker, I made a film, but the disc will not play music, he worked before

  in windows movie maker, I made a film, but the disc will not play music of any other disk, in the past, I did what I do

  Hi Authorsz18,

  You are able to hear the music in the preview?

  Try to adjust the volume of an audio clip in the audio / music. And add music from the disc hard if you added songs to a DVD.
  1. right click on the audio clip > volume
  2 adjust the volume with the cursor.

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-music-to-your-movie

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  Not compatible with the OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the new OS

  I have a MacBook Pro 17 withProcessor - in 2.33 GHz Intel Core 2 Duo (circa 2007).  Running OS 10.7.5 (Lion).  System indicates the computer is not compatible with OS later.  Hardware can be upgraded to the latest processors and other components to make it compatible with the latest OS.  I think that later models of Macbook Pro 17-inch with processors that allow updates.  I was wondering if these can be swapped or if alternatives were available.

  Only the RAM and storage (HD, SSD) can be changed.  Everything is welded to the map logical and selected specially for the system configuration.

  I'm sorry.

• When I publish my movie in movie maker, he publishes with a split screen, how to fix this?

  When I publish my movie finalized in movie maker, it ends with a split screen, half top is my film and the lower half is green screen... What I am doing wrong?

  The info... copied on the net... may be worth a visit:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  Good luck...

  =====

  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following links should help explain how to record in DV - AVI)

  This image shows where the DV - AVI option.
  http://www.Papajohn.org/IMGs/Vista-PublishToComputerChoices.jpg

  Windows Vista - publish a movie in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista - profiles Publishing / qualities
  http://www.Papajohn.org/Vista-publishing.html

  Windows Vista - Windows DVD Maker - burn video disc
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  Windows Vista - DVD - video burning - frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/DVD-Video-burning-frequently-asked-questions

• Movie Maker crashes on Windows 8, all the time!

  I am running Windows 8 on a Dell laptop.  I am trying to edit a video using Movie Maker.  There are a few scenarios where Movie Maker crashed:

  1. I open Movie Maker.
  2. I import a video.
  3. I play the video.
  4. I split the video region into two parts.
  5. I remove one half of the video of the region.
  6. Movie Maker has stopped working, looking for the problem...
  1. I open Movie Maker.
  2. I import a video.
  3. I split the video region into two parts.
  4. Movie Maker has stopped working, looking for the problem...
  1. I open Movie Maker.
  2. I import a video.
  3. Movie Maker has stopped working, looking for the problem...

  I never went through a full session of Movie Maker before it crashed.  What can I do about it?  Thanks for any help.

  Actually, I found another video editor that was included with my computer, so I did not worry about WMM more.

  Volunteer J, I want to thank you for your help.  You quick answers for me after each message sent and gave me very nice information.  I only hope to see you with a later question of mine.  Thanks :)

• What version of Windows Movie Maker is one that has all the features

  Hello

  I wonder what is the best version of windows movie maker?

  Which version has the most options, is easy to use and can create HD videos?  In addition, Vista, or windows XP?

  I'm a newbie total movie maker and would appreciate any help for localization to talk or walk through tutorials.

  Thanks in advance

  Hello

  1. what operating system do you use?

  You can install Windows Live Maker on your system for the edition/creation/sharing of movies.

  Please visit the below link for more on this topic.
  Windows Live Movie Maker:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Movie-Maker

• My saved Windows Movie Maker Project open with video clips in the Audio editing panel and vice versa (NOT as it was created). Can I move them back where they belong?

  After days of the creation of a filmmaker 'project' I 'saved project' one last time, then reopen and publish a movie.  All my video Clips (phtotos) now appear in the Audio editing / music along the bottom with only a video clip standing in line of the video of this 'slide show' of 90 minutes.  Is it possible to move these clips to which they belong without having to recreate the whole project?

  What happens if you try to read the project in Movie Maker?

  Looks like your project .mswmm file is corrupt (starting
  Perhaps more than the best approach). The project can be as far
  too big and too complex to publish (save) with success as a
  video file.

  I suggest that you create several small projects
  and publish (save), each of them in the. WMV video format
  and then re-import the collection. To combine WMV files
  in a single movie.

  You can also import collection. Clips WMV to DVD
  Manufacturer and each clip, would have become a scene (chapter)
  on the DVD.

  The following article is maybe worth a visit:

  Movie Maker - how to divide a project complex smaller?
  http://www.myvideoproblems.com/tutorials/MovieMaker/SplitComplexProject.htm

• Cannot find Windows Movie Maker Windows XP with service pack 3 installed. Where can I get the program?

  
  

  You probably already have Movie Maker.

  Try the following...

  Reach... Start / run...

  Moviemk.exe type or copy/paste

  Press on... Come in

  If Movie Maker is on your system, it will launch.

  If this does not work... the following article may be worth:

  Movie Maker 2.1 Installation
  http://www.Papajohn.org/mm2-setup-software-2_1.html John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• How can I check to see if my system and components are compatible with VISTA, given that the counsel is no longer available and my office will take too many changes to make it compatible with WIN 7?

  I am running WINDOWS XP on my desktop and would like it ungrade to WINDOWS VISTA, but I don't know if all my devices are compatible with WINDOWS VISTA! I would like to upgrade my desktop computer for WIN 7, but it would take too many changes, so I'm going to update my laptop for WIN 7 and I have another laptop running WIN XP! So basically I want to have at least one of the three operating systems (XP, VISTA and WIN 7) on my different computers! WIN XP on my laptop older, WINDOWS VISTA on my desktop (currently in XP) and WINDOWS 7 on my laptop latest (running VISTA)! I just want to know how to find out if there is a way to see if all my components on my desktop are compatible with WINDOWS VISTA, but the Advisor WINDOWS VISTA is no longer available? I used the WIN 7 Advisor to check what is required for me to upgrade my desktop PC to WIN 7 but there are too many changes that need to be done! I also used the WIN 7 Advisor on my new laptop and it has only a few changes that need to be done and that is why I want to upgrade my laptop to WINDOWS 7 and my desktop for WINDOWS Vista!

  Hello

  I already gave you advice available to upgrade to Vista in your other thread earlier in this forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/how-can-i-check-to-see-if-my-system-and-components/7e626228-5572-E011-8dfc-68b599b31bf5

  You should check with the manufacturers of hardware and program

  and use the Vista Compatibility Center

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/

  and read the vista system requirements

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

• Windows XP Movie Maker 5.1 will not save the video file

  The program hangs and displays my CPU maximum (or near it) its use. Admittedly my video file is nearly 500 meg but I simply trim/clip into smaller pieces for easy Assembly. Any ideas?

  Hello

  ·        What happens when you try to save the film? You get the error message?

  Method 1:

  I suggest you perform a clean boot, and then check if the Director of windows works fine or not. To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  I suggest you to check the article mentioned below to know what features are there in windows movie maker and how to use it.

  Start with Windows Movie Maker

  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/default.mspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Movie maker can publish no film because of "missing" files

  When I publish the movie says he can't because the files are missing. Howere there are no files with the Red X that would indicate a file is missing. All files seem to be taken into account. Any suggestions on how to find the file Windows Movie Maker believes Miss? \

  It's very frustrating, as is the level of «support "of Microsoft.»

  When I publish the movie says he can't because the files are missing. Howere there are no files with the Red X that would indicate a file is missing. All files seem to be taken into account. Any suggestions on how to find the file Windows Movie Maker believes Miss? \

  It's very frustrating, as is the level of «support "of Microsoft.»

  =============================
  This problem could be related to the source of the files that
  are not fully compatible with Movie Maker. And
  This could indicate that the project is too large and
  complex.

  Might be worth trying to convert your source
  before you import into .wmv format video
  Movie Maker.

  If you want to try the conversion... What follows
  Freeware can be worth a try:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  all the boxes on the last screen)

  The following article deals with a similar problem
  with the previous version of Movie maker 2.

  Movie Maker 2 - problem solving-
  "Can't save a movie."
  http://www.Papajohn.org/mm2-issues-CantSaveMovie.html

• Images in a Windows Movie Maker project do not appear in the table of Storyboard

  Opening of a creative film project

  I try to use windows movie maker, but when I opened a project I worked on, the imported images and storyboard table display more photos that I imported.  Instead, there is the title of the photo with a big red X, where the captain is supposed to be.  Help!  How can I open and work on a project that I have already started?

  I try to use windows movie maker, but when I opened a project I worked on, the imported images and storyboard table display more photos that I imported.  Instead, there is the title of the photo with a big red X, where the captain is supposed to be.  Help!  How can I open and work on a project that I have already started?

  ====================================
  Movie Maker project files do not include your source files...
  photos, video clips, music files, etc... When these files are
  moved, renamed, deleted or is otherwise not available...
  you will see red Xs in Movie Maker. If files are always
  available, you can click with the right button on the red Xs and go to the
  files and attempt to restore the path.

  Also, see the following article:

  Windows Vista - find a file in Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-file-in-Windows-Movie-Maker

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• FrameMaker is Compatible with Mac in the future?

  Is anyone aware if future versions of FrameMaker will be ever compatible with a Mac? I used to work on a Windows computer, and I really enjoyed using FrameMaker to create installation/operating manuals. I work on a Mac now, and I wonder if it is ever available with a Mac.

  Thank you!

  Bonnie Scheckner wrote:

  Thank you for your reply peter knowhowpro. I know that it is possible to run FrameMaker of Windows on a Mac, but more specifically, I was wondering if there are plans to make future versions of compatible with a Mac FrameMaker. Your answer is always very useful. I might have to switch to InDesign. Thank you!

  You're welcome, Bonnie.

  You're pointing out I didn't REALLY answer your question, because I didn't say something like: "if it is planned, someone who knows can not say, as they would be committed to a non-disclosure agreement (NDA) and violating the agreement would cause the person to lose any participation in any Adobe NDA later.»

  I replied obliquely suggesting a Google search for previous discussions on the issue, as there are a few reasons why Adobe probably wouldn't not even contemplate the task, as well as suggestions of how, in theory, it would be easy for Adobe to adjust a few things and magically have FrameMaker for Mac.

  Except for the cost of Windows (if you use the BootCamp free from Apple) or the additional cost of Parallels or Fusion and maybe add RAM, FrameMaker in Windows on a Mac is almost a perfect reproduction of FrameMaker in Windows on a PC.

  I'm writing a book on InDesign for FrameMaker users. Try the Google search, I proposed views, experiences and opinions of those who have thought about this movement, as well as those who / ve has stepped over the line. If you make no movement, post your questions and discoveries on the InDesign user forum.

  HTH

  Kind regards

  Peter

  _______________________

  Peter gold

  Know-how ProServices

• security of Norton says that my google toolbar is infected with a virus and I can't move to a newer version, because it is not compatible with firefox 5 or newer, what should I do?

  In the menu tasks of my norton Security window, there is a place to check protection against vulnerabilities. One of the concerns that he has an infection in my toolbar on firefox. He suggests that the best way to resolve was made to upgrade to a new version og. google, because as the still there is apparently no problem for it. When I tried to upgrade to a new version of google to cancel the former an open window and told firefox or most recent is not compatible with it. They said that I should either download something from firefox to fix or connect with firefox. Ido know even where to start, not very informed on the problems of this kind. / your help would be very appreciated. What should I do?

  You can use firefox 3.6, which is old, but always taken in charge and course. However, the best solution is to renounce the use of Google Toolbar because Google no longer support this with firefox, mainly because he has little to offer.

  You can always google bookmark by copying in Firefox. Please take a look at

  • Is Google Toolbar is no longer compatible with Firefox - here's some alternatives < - clickable link.
    What can help with ideas and solutions.

  I hope that the Norton report, you make reference to simply says that your system has vulnerabilities, rather that he suffers from a real infection (or that he has treated or quarantined malware).

• Windows Movie Maker has frozen trying to change the title

  Original title: help please!  I just spent a week at the creation of a movie on Windows Movie Maker (came with my Windows XP computer)

  I just spent a week at the creation of a movie on Windows Movie Maker (came with my Windows XP computer) and now I can't change all titles I added when I try it freezes and titles appear on photos of bad... This same application is based on my computer more? I recorded it, but I don't really want to start more can I do?

  Hey Elaine,.

  I suggest that you put your computer in a clean boot state and check if there is another program that is causing the Windows Movie Maker to freeze.

  http://support.Microsoft.com/kb/310353

  Note: Once the diagnosis has been made, put the computer in normal condition by following the steps in "steps to configure Windows to use a Normal startup state."

  If there is no specific program that causes this problem, then please uncheck the program since the start of the System Configuration utility.

  Also, check the event logs viewer for any errors of follow-up when the Windows Movie Maker crashes.

  http://support.Microsoft.com/kb/308427

  See journal of applications for error messages that might have saved when froze Windows Movie Maker.

  Please let us know the result after placing the computer in a clean boot state.