Moving TMS DB from the local to remote

Similar Questions

• Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  Remove temporary files from the local disk c/documents and settings/user/localsettings/temp name

  By definition, this folder should contain only the elements you don't need.  If I understand correctly, this temporary folder is a place where temporary files are stored during program facilities and the facilities.  However, I have seen references other sites to help saying some programs can store folders and files.

  I do my own temporary file elsewhere, name it accordingly and move all the files in the temp folder to the new folder. Use your computer normally for a while, and if nothing complains about missing files, you have a good indication that none of the moved files are important and should be safe to delete.

• AWM 11 g Client to access the site from the local office

  Hi David,
  
  Is it possible to use the MN as a client. For example, I have a virtual machine where I can access AWM for 11g after launching the file AWm.bat of the remote server. However, there is limitation of the terminals for multiple users remote desktop so if developer want to access the workspace even on his local computer is feabile to start the installation from the local computer and leave the same AW interface with all the workspace pre-built and etc. ?
  
  Thank you very much
  Paiva

  Are asking you if you can run AWM on a laptop, say and have access to a database on another server instance? If so, then the answer is Yes. You can run AWM on any Java compatible machine until it can connect (via JDBC) to the server. This can be a problem if you have a firewall.

  If you ask if you can have multiple instances of AWM open at the same time, while watching the same AW, so it's more difficult because AWM attached the AW in read/write mode. There is a solution, but it is not recommended because the various SGF can get out of sync with the AW itself.

• I have troublle with moving my emails from the Inbox to a folder? I also extend my screens whenever it comes to the screen upward? Please help me _ @_. ___

  I have troublle with moving my emails from the Inbox to a folder? I also extend my screens whenever it comes to the screen upward?  Please help me * address email is removed from the privacy * I told my son I would have a computer on which I could get online and with a program I could throw my pearls inventory.

  but when he brought to me he forgot to put windows one. He put the express window and gave me the internet.  I had to go out and find free programs to do the inventory and other things. It's good, but I have trouble with the above two questions.  Can someone help me?

   
  1. What e-mail program?
  2. What is a Windows?
  3. What is Windows Express?
   
   
  Any window that you want to resize all the time must be the last closed window.
   
  Take the corners of the window and drag it to the format full screen. Do not use to expand. Close all other windows first via the taskbar and the latter. Windows will remember the size of the last closed window the next time that you open the program.
   

• I moved a file from the desktop to a folder. I can't find anywhere. Where should I look?

  original title: Lost leader

  I moved a file from the desktop to a folder. I can't find anywhere. Where should I look?

  You can try the Windows search.

• Computer disconnects from the local network after a while

  Hello

  the place I work has a local network with nearly 20 computers.
  One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

  The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

  I have already disabled the drive for energy savings computer network mode.

  What can happen and what can do?

  Thanks in advance,
  Felipe Sousa

  Hi Felipe,.

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your computer disconnects from the local network.

  I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

  Check out the link:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Debugger disconnected from the local process. IntegratedWebLogicServer stops

  Hello

  Get the following error message when you try to debug page. Help me about this

  < 26 August 2015 13:23:10 IST > < error > < security > < BEA-090892 > < loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely. >

  < 26 August 2015 13:23:10 IST > < critical > < WebLogicServer > < BEA-000386 > < server subsystem failed. Reason: weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  weblogic.security.SecurityInitializationException: loading of the OPSS java security policy provider failed because of the exception, see exception stack trace or the root server log file. If still don't see no obvious cause, turn on debugging of the flag - Djava.security.debug = jpspolicy for more information. Error message: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.loadOPSSPolicy(CommonSecurityServiceManagerDelegateImpl.java:1398)

  at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.initialize(CommonSecurityServiceManagerDelegateImpl.java:1018)

  at weblogic.security.service.SecurityServiceManager.initialize(SecurityServiceManager.java:873)

  at weblogic.security.SecurityService.start(SecurityService.java:141)

  at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)

  Truncated. check the log file full stacktrace

  Caused by: oracle.security.jps.JpsRuntimeException: cannot read the policy store. Reason is the error PolicyStore javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStore.buildFromFile(XmlPolicyStore.java:496)

  to oracle.security.jps.internal.policystore.xml.XmlPolicyStore. < init > (XmlPolicyStore.java:276)

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:100)

  at oracle.security.jps.internal.policystore.xml.XmlPolicyStoreProvider.getInstance(XmlPolicyStoreProvider.java:74)

  at oracle.security.jps.internal.core.runtime.ContextFactoryImpl.findServiceInstance(ContextFactoryImpl.java:139)

  Truncated. check the log file full stacktrace

  Caused by: oracle.security.jps.JpsRuntimeException: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:166)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:180)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntry(XmlDataStoreParser.java:187)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStore.loadXmlDataStore(XmlDataStore.java:411)

  to oracle.security.jps.internal.core.datastore.xml.XmlDataStore. < init > (XmlDataStore.java:276)

  Truncated. check the log file full stacktrace

  Caused by: javax.xml.stream.XMLStreamException: ends the Document concluded prematurely.

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunction(StaxPolicyStoreParser.java:2186)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processFunctions(StaxPolicyStoreParser.java:2072)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processAppPolicy(StaxPolicyStoreParser.java:796)

  at oracle.security.jps.internal.policystore.xml.StaxPolicyStoreParser.processPolicyStore(StaxPolicyStoreParser.java:521)

  at oracle.security.jps.internal.core.datastore.xml.XmlDataStoreParser.getDataStoreEntryStax(XmlDataStoreParser.java:120)

  Truncated. check the log file full stacktrace

  >

  < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < changed failed State Server >

  < 26 August 2015 13:23:10 IST > < error > < WebLogicServer > < BEA-000383 > < is not an essential service. The server will shut down >

  < 26 August 2015 13:23:10 IST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to FORCE_SHUTTING_DOWN >

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  Process is complete.

  Debugger disconnected from the local process.

  [IntegratedWebLogicServer Instance server stops.  All running applications will be terminated and canceled.]

  Thank you

  Krishna

  Hi Cvele_new_account

  Thanks for the reply.

  I tried that, but he helped me. Finally I deleted the DefaultDomain file under the following path to get rid of the question

  C:\Users\Username\AppData\Roaming\JDeveloper\system11.1.1.6.38.62.29

  Thank you

  Krishna

• When you expand to show the local and remote sites in DW CS6 how local to be left?

  When you expand to show the local and remote sites in the previous version of DW, the type of files (local or remote) selected when you see do not both, automatically came on the left.  I liked local when I'm editing and when I'm ready to download I expand to see the two premises remotely.  Before, the one you selected, in my local case, was always displayed on the left.  In CS6 when I local selected before I develop, the local is now right and distance on the left. For me, this is not correct.  I find that having local on the works of best left to me as reading, left right, I want the room on the LEFT, so I put the update on the left of the remote control on the right.

  in DW CS6-> How to get the local to be on the left?

  Edit > Preferences > Site

  Change the right to the left on the top.

• How to remove unwanted files from the local root folder of the site?

  Hello

  I work with Dreamweaver CS4 on a Windows PC. I have finished my site but I have a lot of files in my local root folder that I don't want to upload to the server. These unwanted files are for most of the photos that I should not be used in my site. I do not understand how to download the site on the server using ftp and remote folder in Dreamweaver. I suppose that if I move the page html files to the remote folder that my photos will not be associated with these html files automatically. I used a Dreamweaver template during the construction of the site. I wish I had a folder with only the necessary files for the site (all html pages and a folder of images) to upload to the server. Is there an easy way to move all my pages and images associated with a folder or remove all unwanted files in the local root folder? As I see it now, I'll have to go through all my pages and write down each title of the photo and then go back and delete each unwanted file. This seems a lot of your time, so I thought that there must be an easier way, I hope.

  Any help or ideas will be of course very appreciated, thanks, dluthier

  I guess you mean 'work' files, not the images that you use in your Web site.

  If they are not related to all pages of your site, you are free to move by using your computer's file management tools. I can give you specific instructions, if you wish, but the short of it is that you do not keep them in the folder root of your site at all.

  In my way of working, I have a folder for each client that includes:

  • The correspondence of this client folder
  • Folder to 'Work'... the PNG images, etc., or of the images from the client
  • Record the site root

  When I get e-mail, I save the message in the appropriate folder of correspondence, I save the images etc in the folder of 'Work' to the customer and I only save images and other who have already been optimized in the Site folder, keep it as intact as possible.

  Even if the general warning must always use the files Panel to move files around, that applies to files which are linked and form part of the structure of your Site. Moving your files 'work' outside of the structure can be carried out safely in windows explore your PC.

  That said, if you need to download and there are files you want to download, or to move, you can 'hide' the in the files Panel by right-clicking on the file name and choosing 'Cloaking '.... "in the context menu that appears.

  To the point that the image files that are downloaded to the remote site will not 'automatically' be associated with your html files. That is right. Unless you have configured explicitly links or associations between files, images will not associate themselves!

  On the subject of 'automatic' way to do this, you can make a link to check on all of your local site. Window > results > Link Checker will bring up the appropriate window, which will give you the choice: broken links, external links and orphan files (this is the one you want). Use the green triangle tower at the left end of the Link Checker to set your auditor... Current Local Document or a set current site.

  If you want to make a checklist to ensure that you move them all, you can save the report by clicking on the small icon "Floppy" under the Green turn the triangle. Who will be on a file text and make up a dialog that you save the report, which will show the broken links, external links and orphaned files. After you move the files to your heart's content, rerun the link check and confirm that you moved the files you want to move. Make sure that you DON'T move files consciously... do not move the .htaccess files or .cgi files, etc.

  Who will save you from actually having to 'write' file names!

  Z

• Changes of data type of column between the local and remote database

  Please point me the proper documentation, so I can understand what is happening.and how to solve the problem in the short term until we can change the database character set to match the remote database.

  Details:

  Remote database: set of 12 c CARS characters AL32UTF8

  Database local 11g 11.2.0.4 as UTF8 character.

  CREATE TABLE local_table_t AS (SELECT NAME FROM reference_table_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 byte), it creates this column in local_table_t as varchar2 (30 bytes)

  CREATE TABLE local_table2_t AS (SELECT NAME FROM reference_table2_t@remotedb)

  the NAME column in reference_table_t to remotedb is varchar2 (10 char), it creates this column in local_table_t as varchar2 (30 char)

  This same problem also happens with views materialized from the remotedb.

  Thank you

  Dave.

  Found note size double or triple column when using (materialized) views / DEC in a db AL32UTF8 and the dblink pointing to a non-AL32UTF8 db (or vice versa). (Doc ID 1592514.1)

  that answers my question.

  Dave.

• Global variables are accessible from the local computer

  While he was trying to use RT project, I can deploy the file to the RT target and communicate with the host using a shared variable.

  But the host VI file returns an error stating that the shared in the pattern-block VI host variable is illegal.

  (RT.lvib\Link reqd\ 'shared variable' node is illegal)

  It also gives a description mentioning that global variables are accessible only to local machines.

  What is the cure?

  Hi Shan21,

  I think your problem with communication between the aim of RT and the host PC might be caused by how your deployment of your variables. Please take a look at the following and let me know what you think,

  Kind regards

  ******************************************************************************************************************************************

  When you make the executable of a project using shared variables, you must have a local copy of the variables on the deployment computer that are then linked to the 'real' shared variables stored on the target - cRIO, in this case.

  This means that the display of your project should look like this:

  

  Note: Two libraries, which can have variables with the same name because they aren't both on the local computer.

  The steps required are:

  1. create variables shared in the normal Manor on the cRIO:

  

  a. right click on the target
  b. new > Variable
  c. properties of the variables enter the name (stop); Data type (Boolean) and the Variable type (always in network-published).

  2. create variables shared on the host PC:
  a. follow the steps 1 a - c
  b. right click on the box to enable anti-aliasing

  

  c. linking to the URL of the PSP, click on Browse - and select variable on the target:

  

  d. click Ok.

  Note: Remember also to deploy the shared manually variable llb. See the related links for more information.

  It's from a base of knowledge to write soon.

  Note:3UCBHM8T knowledge base: how to deploy network Variables shared a compiled executable

• How to connect the local and Remote Desktop (Android OS) application simultaneously without one shot the other in the login screen?

  I want to connect to my local office via the remote desktop connection, but keep both connected at the same time without being local or remote kicking each other in the bridge/connection between the two. I tried to download and patch the termsrv.dll using UniversalTermsrvPatch - x 86 .exe for Windows Xp 32-bit SP3 compatibility. But still... Settings app may prevent 2 to be connected at the same time? If so could Microsoft please update their app. Any suggestions...

  Try this link for desktop connection xp remotely.

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=7208

• Z10 blackBerry how to remove all entries from the Local calendar?

  My calendar shows my email entered account and all is well.  However, I think that when I transferred all of my Bold 9900 he faces a bunch of entries in the local calendar (House) that I don't want.  I would like to delete all entries in the local calendar.  How can I do this?  Thank you!

  Unfortunately you can't remove individual events right now. The fastest way to remove events is the 'Month' tab, then tap and hold events in the list and select 'Delete' from the side menu.

• You try to run a Site to site VPN and remote VPN from the same IP remotely

  We currently have a site to site VPN configuration between our offices call center and a 3rd party that allows them to access our training to their employees to use environment while being trained on our systems. This tunnel is running between our ASA and their ASA without problem; However, when we have managers come out to the call center, they are unable to use remote VPN to access our office.

  Apparently the same IP peer remote that we use for our site to the other tunnel is the same IP that our managers use to access the internet when they are on-site with the customer. When I look at the logs it shows the VPN attempt and then I get treatment Information Exchange has failed. So from what I can understand when our managers are trying to connect to our firewall from the same IP address as the counterpart of site to site it automatically tries to create a tunnel, according to the information of the site to the other tunnel. If our managers are anywhere else, they can connect through remote VPN with no problems.

  My question is if anyone knows of a way to make the firewall allow VPN site to site and remote connections with the same remote IP address.

  Hi John,.

  Basically, in older versions, when you hit a static encryption card and you does not match this static encryption completely map the connection continues until the dynamic encryption card. For this reason, you can connect your IPSec clients before. A bug has been opened on this vulnerability.

  CSCuc75090  Details of bug

  The crypto IPSec Security Association are created by dynamic crypto map to static peers

  Symptom:

  When a static VPN peer adds all traffic to the ACL crypto, a surveillance society is based even if the pair IP is not allowed in the acl to the main façade encryption. Are these SA finally put in correspondence and commissioning the dynamic crypto map instance.

  Conditions:

  It was a planned design since the first day that allowed customers to fall through in the case of static crypto map did not provide a necessary cryptographic services.

  The SA must be made from a peer configured statically and a dynamic crypto map instance must be configured on the receiving end.

  Workaround solution:

  N/A

  Some possible workarounds are:

  Configure a static nat device when you try to use the remote VPN if the firewall remotely will be hit with a different public IP address. It would be a good solution, but it will depend on how many ip addresses public you have available, if you really want one of these ip addresses for that access.

  Also, I thought you could use AnyConnect instead of the IPSec VPN client. I don't know how many users need to connect from your PC to the remote site, but the ASA has 2 licenses SSL available that you could use. Because Anyconnect uses the SSL protocol, it won't have a problem on your environment.

  Below some information:

  http://www.Cisco.com/c/en/us/TD/docs/security/ASA/asa84/configuration/guide/asa_84_cli_config/vpn_anyconnect.html

  Hope this helps,

  Luis.

• Copy files from the local PC folder to the VM folder

  I would like to copy files from my local PC file to a Dtx200 (which is the data store for my data center)

  I used the following commands:

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  the error I get is can not find the drive named SAN2

  However if I use the following commands

  Get-data-server store < my VM server IP > -name "SAN2"

  I get

  Name FreeSpaceMB CapacityMB
  ----                               -----------      ----------
  3938452 4766208 SAN2

  now I use

  $datastorename

  = Get-data-server < my VM server IP > store -Nom "SAN2" | New-DataStoreDrive-name datastorename

  Copy-DatastoreItem-point

  $SourceBuild_ISO -Destination datastorename:\BHM\BHM_ISO_IMAGE-Force

  This method works. (New-DataStoreDrive performing a mapping to the real data SAN2 store)

  However, New-DatastoreDrive is an alias for a command (for New-PSDrive) sometimes gives the error that New-DataStoreDrive is not a valid cmdlet and sometimes it works well

  If I want a copy of the files in my local PC file to a Dtx200 (which is the data store for my data center)

  use the following commands directly? Why do I need to map a drive to the data store?

  $SourceBuild_ISO = 'E:\fileslist\Image\image1.jpg' #folder on my local PC where I have my vsphereClient installed

  Copy-DatastoreItem-point $SourceBuild_ISO -SAN2:\BHM\BHM_ISO_IMAGE Destination-Force

  where SAN2 is my data storage for my VM

  No explanation? Suggestions?

  The path to your data store that you must supply the parameter - Destination must begin with a drive of psprovider.

  Try it like this

  New-PSDrive-location (Get-Datastore SAN2) - ds name - PSProvider VimDatastore-Root ' '

  Copy-DatastoreItem-point $SourceBuild_ISO-Destination ds:\BHM\BHM_ISO_IMAGE-Force

  You can also use the readers of vmstore or vmstores.

  These 2 are there automatically after a Connect-VIServer.

  Given these discs start higher up in the hierarchy of vSphere, you will need to fit the destination path.