MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "

Hello

So, here are the problems I encounter, and what I did to try to fix myself.
Whenever I try to connect my MP3 player via the USB port (no matter which), it keeps coming back as the "Drive is not accessible. Access is denied. "  This same thing happens everytime I try to put an SD card in the SD card slot.  However, despite this, I can plug my USB mouse and use it, as well as the keyboard and it records only.  I can also use the HDMI port to use my TV as a second monitor and, also, to record that.
What I did to solve the problem, it is to restore the system to the previous times before that happened, did not.  I also went into the Device Manager and uninstalled and re installed, USB and SD card drivers.  I also tried something in the sense of taking control of the files via a right click on a folder and go to properties and then security and to the 'advanced settings', the problem with this situation is that I can't in readers at all.
I am currently running Windows 7 (64 bit) on a laptop Lenovo, the computer itself is actually only a few months.  If someone knows something about this, please let me know.  Thanks in advance.

Hello

1. What is the number of brands and models of MP3 player?

2 are logged in as an administrator on the computer?

3. are you able to use this device on another computer (not Windows XP)? The MP3 player or SD card already worked on this computer?

4. Once you get this error message? Do you get this error when accessing the mp3 player and SD card on Windows Explorer?

Run an antivirus with Microsoft Safety scanner scan and make sure your computer is virus-free.

The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.

Response with more information to help you.

Tags: Windows

Similar Questions

  • Q player said... Q drive is not accessible access is denied

    Why drive drive Q say Q is not accessible and that access is denied? The player says it's "Office Click-to-run".

    I went to uninstall click to launch the program, it cancels them at the end and click to run the Application Manager gives the error message

    I tried to uninstall all Microsoft Office Office Starter. But none can do.

    I can't use the Office Starter either. It gives an error message 'Click-to-run configuration failed. Please e-mail me at * address email is removed from the privacy * thank you. Pamela

    See this thread.
    http://answers.Microsoft.com/en-us/Office/Forum/office_2010-office_install/what-is-the-q-drive/4b98ad88-B3F0-4362-B315-1a7bfbf7e4f0

  • I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

    I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

    original title: third party INF problems

    Hi Paul,.

    ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

    You can see the following article on how to set up a network.

    How to set up a small network with Windows XP Home Edition (PART 1)

  • Unable to see the MP3 player in the media

    I use a 64-bit and Vista computer.  I can't get my MP3 player to show as a media device, and so I can not synchronize files.  I can see the device when I go to Explorer, and can read files off of the MP3 player.  On the internet, I advice to check Windows Media Player Network Sharing Service.  When I went for the management of it services, this service does not exist on my machine.  Is - this lack of place the reason why I can't sync it with my MP3 player in the media and, if so, how do I restore it?

    Hello

    1. What is the number of brand and model of your device?

    2. do you have software as well as the device or the driver?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

    http://support.Microsoft.com/kb/929833

    For your reference: Windows Media Player sync: Frequently asked questions: http://windows.microsoft.com/en-US/windows7/Windows-Media-Player-sync-frequently-asked-questions

    Hope this information is useful.

  • No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error.

    * Original title: hard drive problem

    No matter how much hard drive space or size is not displayed. It says hard drive is not accessible and the cyclic redundancy error. When I try to format it, it says windows could not finish.

    What just happened? How can I solve this problem?

    It says hard drive is not accessible and the cyclic redundancy error. How can I solve this problem?

    Sorry, you can not. A CRC error means that there is a serious problem with your drive. You need to replace it.

  • Access denied make sure that the drive is not full or write protected

    Original title: when insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected
    When insert my USB it is detected but when I try to copy a file from the PC to the USB it shows an error message. Access denied make sure that the drive is not full or write protected

    Hello

    Thanks for posting the question in the Microsoft Community Forum.

    Will guide us in the question.

    You can try the steps and check if you are able to copy a file from computer to the USB key.

    Method 1:
    You can try to copy the file on computer for USB in SafeMode.
    A description of the options to start in Windows XP Mode
    http://support.Microsoft.com/kb/315222

    Method 2:
    You can try the steps in the article to (KB) knowledge base and check if it helps:
    Error message when you try to delete a file in Windows XP: "access denied".
    http://support.Microsoft.com/kb/298345

    Reference link:
    How to capture a file or a folder in Windows XP
    http://support.Microsoft.com/?kbid=308421

    Hope that the information provided is useful.

    If you need further assistance, please answer and we will be happy to help you.
  • drive not ready message "the drive is not ready for use check the a drive, etc.".

    as soon as I connect my camera to transfer the photo I get following message

    The drive is not ready for use: the door can be opened. Please check the a drive; and make sure that a disk is inserted and that the door is closed.

    I can't get rid of this meaasge if I have to cancel it reappears 10 seconds later it just won't close very boring

    Hello

    What is the number and the model of the computer?

    You have the computer floppy drive?

    Were there any changes made on the computer before the show?

    Follow the steps:

    Method 1:

    Remove all external devices connected to the computer such as printers, scanners and external USB hard drive and check if the problem persists.

    Method 2:

    Check the BIOS setting and also, I suggest you to update the BIOS. To update the BIOS, contact the manufacturer or the manufacturer of the access Web site.

    Note: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  • Need to replace the drive but not allowing OpenManage not not fault reader must be set to 'offline '.

    Hello

    We hope a quick and easy solution to what I'm procrastinating at the moment.

    Have a server Poweredge 1800 (PERC 4/SC, RAID5) and got a failure on one of the SCSI drives. It's hot and we got the replacement.

    However, OpenManage is not let me put the failed drive to 'offline' so that I can share. I'll choose the option offline in the menu drop down and when running it just empty screens (see photo). Is this a symptom of something not quite right? No problem with other options (blink/unblink).

    If not can I just start in the PERC menu, set the active player in offline mode, swap, set the new drive to rebuild from there?

    Seems to be a split view when I look at other similar questions on other threads in forum, for example, some say that you should just pull the drive and Exchange even without putting off line first.

    Thank you

    Alex

    Alex,

    It is possible that you are using an older version of the OMSA or that the controller is out of date.

    With the drive is not going offline. What you can do is to the server once it is off, then remove the disc. Powered with nothing in this niche, the table should show that degraded. Insert the replacement drive and it should start to rebuild.

    Let me know how it goes.

  • Upgrade to win 10, updated the drive, returned to Win 8.1, now the drive does not

    How can I fix Adobe Reader?  I upgraded to win 10, updated the player to work with Win 10.  Hated win 10, I went back to win 8.1, now the drive does not work and I can't uninstall it.  Said channels can be verified.

    Try to run this tool: Download Adobe Reader and Acrobat tool - Adobe Labs

  • How can I disable the pop up message "of making Yahoo your homepage in Firefox" which keeps coming back?

    When I disabled Java and upgraded all the State of plug-in, made Firefox MSN my homepage and I wanted Yahoo. Now the message to my Yahoo home page keeps coming back when well even Yahoo is now in a State of the home page.

    The "Internet settings" in the control panel are just for Internet Explorer, so that you can put those aside for the moment. To check and change the home page of Firefox, you can use the page Options, as described in this article: start-up, homepage, tabs and download settings.

    Amethyst48 said

    Now the message to my Yahoo home page keeps coming back when well even Yahoo is now in a State of the home page.

    Where do you see this message? If it's on Yahoo itself, you can ignore it or click ignore. Sites have no idea of your current home page, because web pages are not allowed to read the settings of your browser. In general they just continually make themselves known, and if tell you them to be quiet, they remember that setting a cookie.

  • Firefox will not keep the settings available, they keep coming back to a default value

    I used to be able to change the zoom by using ctrl_scroll and it worked fine (to fit the entire page on a single screen with no scroll bar). Now, even after I have it, as soon as I go to a new site or edit folders in gmail, it keep coming back to a default zoom make the page too big to fit on a single screen. It is especially annoying with gmail...

    There are a couple of modules designed to record your zoom settings. They also allow you to define a new zoom level for all pages, you have not yet visited. I have not tried, but here they are:

    If there are sites that are still a concern, feel free to post their URLs.

  • Capsule of the airport is not accessible from the internet

    Capsule of the airport is not accessible from the internet

    He could be reached at any time and has now stopped working?

    How have you tried?

    Three common methods... that you use?

    Airport drive - remote (3 methods)

  • After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help?

    After you download El Capitan, I received the following error message when you try to install: the drive is not formatted in MAC OS extended (journaled). Use disk utility to enable logging or reformat the disc. Can anyone help? (My disk utility shows that she in MAC OS extended (journaled) format.)

    It shows that it is Mac OS extended, not journaled. Click enable logging in the toolbar.

    The thing you read is if you format the drive using the RAID settings you have selected. You have to look at the bottom of the window where it shows the Format.

  • Updates to Windows during the stoppage has not taken effect and the same updates (16 of them) keep coming back in the next restart.

    Original title: Windows updates has not taken effect.

    My Windows updates during the shutdown did not effect. The same updates (16 of them) keep coming back in the next restart.

    I tried fixed it 50461 mentioned in one post, but the problem persists.

    Any help to appreciate.

    Hi Lee CC,.

    1 windows operating system you are using?

    2. you receive an error code or error messages?

    3. Why have you tried the Fixit 50461? Have you received a 646 error?

    This problem can occur if updates failed to install.

    Method 1:

    You can read the following article and try to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 2:

    You can also read the following article and check if it helps.

    Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

    http://support.Microsoft.com/kb/910339

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

    Nancy Drew games - get this error message: Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

    Any suggestions?

    Hi gkfuller,

    Have you followed the steps that I recommended above? If this isn't the case, please do and check the result.

    Step 1: Remove the game completely:

    If the above steps do not work, uninstall and reinstall the game should solve this problem.

    How to change or remove a program in Windows XP

    After you have uninstalled the game, check that all the game files have been removed from your computer. The remaining game files will be in one of the following locations (depending on the title of the game and your operating system):

    C:\Nancy drew
    C:\Program Files\Nancy Drew
    For XP: Folder 'My Documents' (C:\Documents and Settings\nom_utilisateur\Mes Documents)

    For more details, see: Impossible to uninstall using Add/Remove Programs

    Step 2: Reinstall the game

     

    To install the game manually, see the steps in the article below.

    http://www.herinteractive.com/CMS/FAQ/install-does-not-start-when-i-put-my-disc

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

Maybe you are looking for