MP600 printer is considered as a removable disk.

Similar Questions

• printer shows as removable disk drive

  Today, after several years of operation, my HP Officejet J6480 started appearing as a removable disk drive, which makes my out-of-date configuration backup USB drive (the designated reader is a letter out now).  I can redo the backup configuration to get around this, but would rather fix the problem.   Still, it will print and fax.  I tried unistalling the material and then put it back, but still have the same question.  How can I get that back to just a printing device and not a removable disk?

  Hello

  The machine probably uses the card reader on the printer as a reader of withdrawal. You can ALWAYS reassign the external HARD disk drive letter and keep your backup even drive. Please use the tutorial below for Windows XP, Vista, 7 and 8:

  http://www.PCWorld.com/article/2042380/how-to-change-drive-letters-even-when-the-letter-you-want-isn ' t - available.html

  Kind regards.

• What Flash USB Sandisk readers are a fixed disk and removable disks are considered?

  It seems that number of new flash drives is now seen by Windows as fixed and not removable.

  This is apparently due to a requirement of Windows 8.

  My preference is the USB flash drive to be seen as a removable drive.

  What Flash USB Sandisk readers are seen by Windows as a disk fixed and removable disks are considered?

  It is best to look for a drive that is not compatible to Windows 8.

  Please answer and thank you

    Hi Guybelliveau,

  Dear member of the community of SanDisk, welcome.

  Well, the corrected versions, were arrested in mid-2013.

  But always in the trade, they have in stock since before.

  Therefore, is simple, see the date the package, and if it's 2014, no problem.

  Also, you can contact Support SanDisk technique, to tell them, the product of these versions and ready code.

  Link: http://www.sandisk.com/about-sandisk/contact-us/

  Here I leave this link, where this subject has been discussed very thoroughly, by the Forum users:

  http://forums.SanDisk.com/T5/all-SanDisk-USB-flash-drives/fixed-local-Flash-drives/TD-p/313281

  http://forums.SanDisk.com/T5/all-SanDisk-USB-flash-drives/SanDisk-Extreme-64GB-make-it-a-fixed-drive...

  Enjoy!.

  Sincerely, Alfred.                                                           (Google translation)

• "The feature you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the disc "TrayApp".

  OT: TrayApp disk?
  I get a message after my computer starts "the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the 'TrayApp' disk then I have another box that says please wait while the window configures TraApp. They're going away the screen, I'm sure it's something on my beginning of preety menu up which should be removed, but don't know what it is. Please can someone help?

  Hi sandirose,

  1. using HP printer?
  2. don't you make changes to the computer before the issue occur?

  TrayApp disk is a HP printing software, I suggest you perform clean boot and remove the program that is causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: follow step 7 of section of boot KB929135 to the computer in normal mode.

• iTunes does not recognize my ipod touch but my pc it shows as removable disk

  iTunes does not recognize my ipod touch but my pc it shows as removable disk

  First of all:

  iTunes: fix iPhone or iPod not detected Windows 10

  Then, try

  iPhone, iPad, or iPod not recognized in iTunes for Windows

  -I would like to start by

  Remove and reinstall iTunes, QuickTime, and other software components for Windows XP

  or

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  -New cable and another USB port

  See also:

  iPod not recognized by iTunes windows - CSA

  Troubleshooting problems with iTunes for Windows updates

  -Try on another computer to help determine if a computer problem or iPod

  NOTE: you need iTunes 12.3 and in need of Win 7 or a later version.

• Drive external HARD identified as removable disk

  Hello
  I have the Toshiba 593500 - B 750 G external hard drive and I can't access my files stored on it. It's a USB 3 drive.

  When I plug it I get the added device, but the drive appears in my computer as a removable disk and I can extract is no longer my file.

  The drive activity light does not light, but the car turns.
  I tried this drive on several different computers with the same results.

  I changed the drive letter, the same result. I uninstalled the drivers, the same result.

  Help, please.

  > I have Toshiba 593500 - B 750 G external hard drive
  What HARD drive you exactly, because this isn t number I known

  Another question: could you access the HARD drive and the files in the past?

• Cannot install Silverlight error: the component that you are trying to use is on a CD-ROM or another removable disk that is not available.

  Original title: Cannot install siverlight wants cdrom

  When I try to install from a download of Microsoft Silverlight, I come me next survey on my screen:

  The feature you are trying to use is on a CD-ROM or another removable disk that is not available.

  Insert the disc of "Microsoft Silverlight" and click OK

  Use source:
  Installation of Microsoft Silverlight 1

  I killed the associated files of SilverLight with REGEDIT.  In Add or remove programs to audit, it has returned.

  Please help as I can't watch videos COMCAST without installed.

  Frank K.

  Hello

  I suggest you go to the link below and post your question in the Silverlight forums for help on this issue.

  http://forums.Silverlight.NET/

  Hope this information is useful.

• Remove disks or other media.__Press press any key to restart

  Hello

  I've seen a few posts on this topic but not have been very useful.

  My computer (Dell Inspiron 2200) was relatively slow and I decided to reformat the machine.  After doing that it seems the hard drive was fried in the process that I have been unable to get the machine to boot properly after the reformatting process.  When I ran a diagnostic on the computer, a message was also discussed more leading to believe that this was the case.  This is why I took an old hard drive that I had and tried to use it on the machine.  I created a Windows startup disk by downloading the file and burn a disk.  I changed the order of BIOS to move the CD drive first on the list and the error "remove disks or other media."  " Press any key to restart" continues to be displayed.  Please help me

  Thank you

  A HD is fried in any reformatting/installation process.

  You don't need to create any gain of boot floppies, you just need your convalescence winxp / installation disks to prepare your drive for installation

• to access the removable disk: menu box E

  Sometimes when I connect an electronic device with a windows usb cord opens a menu box called removable disk: E Drive. other times this box does not appear, and I need it (usually to upload photos). When he's not pop up automatically, how can I access it?

  Open my computer, you see your device that there are listed, right click and click on AutoPlay or open.

• USB mass storage shows as removable disk. When I have the Explorer, it insists on the fact that I have inserted a disc.

  Original title: USB mass storage shows as removable disk

  an external hard drive appear in devices such as a USB media device, but in Explorer windows as a removable drive; When I have the Explorer, it insists on the fact that I have inserted a disc.

  After a windows upgrade restarted the computer, windows Explorer showed the USB mass storage. Everything is OK.

  Thank you.

• removable disk does not detect

  Hello

  I'm having the problem with the removable disk. In accordance with the instruction given, I installed USB 2.0 successfully. But also I receive the statement as "in the Insert the diskette into the drive. My unix is detection of card reader. But not able to access all data cards (Transcend - Fuji Film & Mobile memory card). Please help on this. I have important messages to this topic.

  Hi Steve,.

  ·         If it works much earlier?

  Try the following.

  Method 1: Run the next Fixit tool and see if it helps.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the article mentioned below.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

• TrayApps Message - the component you are trying to use is on a CD-ROM or another removable disk that is not available. Insert the TrayApp disk and click on 'ok '.

  Original title: TrayApps Message

  I get a message, "TrayApp" - the component you are trying to use is on a CD-ROM or another removable disk that is not available.  Insert the TrayApp disk and click on 'ok '.

  Hi BobKern,

  Follow the steps listed in the article mentioned below to solve the problem:

  Resolving MSI startup errors

• How to make bar selection of removable disk (e :)) back to where it was?)

  I can't get my digital camera to upload photos. Section that is used to take info out of the disc [disc removable (e :))] yhe went where it was somewhere in an area unaccessable. He moved and I can't get it back.  My driver discs are not load into the pc.  They have been read by [disk removable (e :))] how can I move this area where he was buried there?

  I'm new to computers, will you? When I was in school they always used an abacus.  It damaged my pc if I pushed the wrong button to make this disk drive to move to an unknown area?

  [[[[[In the box that wants me to select the type of disc driver he used to have a list like this: 1] 3 1/2 "disc 2] drive the other 4] removable 3] D (f) disc and disc 5] removable (e :)).   The TWO removable disk E & F have been taken out of the box of choice and moved somewhere else.  How they return to their original state?  Thank you.

  GREYBIKER

  You see the camera in "My Computer" as a removable drive? Is it still E:?

  -pa

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I download pictures from a removable disk?

  my computer is not download my photos from a removable drive, any suggestions?

  More details please... What are you calling a removable disk?
  And how do you access it?

  Removable disk as in going... Start / computer... and see
  the list of removable disks that represent the locations of media
  Reader? if_Yes_right click on the removable disk that corresponds
  with the memory of your card and choose open or explore in the
  menu. This should display the directory of the card and allow
  allows you to copy and paste or drag and drop the pictures in a folder on your
  hard drive.

  Also, you may need to adjust the automatic run settings:

  Windows Vista-
  How to change the auto run settings
  http://Windows.Microsoft.com/en-us/Windows-Vista/Change-AutoPlay-settings

  Windows Vista-
  Troubleshoot AutoPlay
  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-AutoPlay-problems

  Windows Vista-
  AutoPlay: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/AutoPlay-frequently-asked-questions