MpHeapReAlloc could not be found in the library ODBC32.dll Hotlinks

Similar Questions

• The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Get this message when I start my computer, that is when the sign of Windows in the reception area appears:

  It says netsh.exe - Entry Point not found

  The procedure entry point MigrateWinsockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  Hey Jay_551,

  I have a good amount of information which I hope will be your answer useful lol.
  For starters, what Anti Virus do you use, the "netsh.exe" has been know to be infected by the virus and be put in a folder by some anti-virus. So I would check that out in your antivirus, I had this info at the following link:
  http://social.Microsoft.com/forums/en-us/msrconferencexpclient/thread/92f50d2c-e7a4-4c16-91ea-06bd59e15f8f
  Also here is the Microsoft article on how to remove the 'Zentcom System Guard", he is recorded as my Microsoft Malware, then read the following link:
  http://www.Microsoft.com/security/portal/threat/encyclopedia/entry.aspx?name=Zentom+system+guard
  Also because it's a common thing for there to be lack of pop - ups after a system file is infected, and removed from the infection, I would review the last link below it. It was created about other missing files, but the situation applies to you:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/entry-point-not-found/66e6caf2-3087-4469-8816-59a19b3033c2

  Let us know the status or if you have any questions after these steps. I hope this has been useful and thanks for the display of Microsoft Answers!

• I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw to shlwapi.dll

  I am trying to install a program and I get entry point getdlldirectoryw could not be found in the library of links Dynamics kernel32.dll file and the same for shreggetvaluesw in shlwapi.dll. How can I fix the problem.

  You have all your current updates?
  Go to windows updates and see if there are updates that you do not have installed.
  The error message seems to indicate that your copy of XP has not been updated.

  Updated and let us know if you still receive the error message.

  Thank you

  Marilyn

• Windows 7 64 bit with Abra customer 6.3 error "" point procedure entry GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.

  When you try to run Abra Client Version 6.3 on Windows 7 (64 bit) system we get the error message "" the procedure entry point GetFileVersionInfoSizeA could not be found in the library of dynamic links VERSION. "" DLL.  The following error message is "the VFP6R. DLL file is invalid or damaged. "Does anyone have a solution?  We have become very dependent on this old Abra Suite and would not lose him.

  Thanks for the help, Bill.

  I tried the compatibility mode with the same results.  I installed the XP mode software and installed Abra in this virtual network and it works perfectly.

  Take care

  Johnnie

• Error Acrobat.exe - point of entry not found the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  When you try to save a file that I changed, the file will not save and I get the following.

  the procedure entry point PropVariantToString could not be found in the library of dynamic links Propsys.dll

  New computer Windows 7, the new standard Acrobat installation.

  How can I fix it?

  Hi koko,.

  This happens with a specific file?

  Have you tried to update Acrobat on the last patch v11.0.09 and verified?

  If it please try to repair Acrobat in the 'Help' menu and check if you still faces questions.

  Kind regards

  Rave

• Trying to install my printer Kodak after new XP installed. Error message {procedure entry point could not be found in the library of links Dynamics cscomp dll}

  I had a Trojan horse and had to do a reinstall of windows XP Pro is now trying to install my printer but I get the error message saying "entry point procedure GetMessage DLL is not found in the cscom dynamiclink library dll. Help, please!

  Hello

  I suggest you to refer to this link and check if it helps:

  http://support.Microsoft.com/kb/308028

  It will be useful.

• the procedure entry point MigrateWinstockConfiguration could not be found in the library of dynamic links MSWSOCK.dll

  RPC server is unavailable.    Firewall Windows says "access denied."       won't hold an IP address

  Hello

  • Have you tried the steps mentioned in the previous post?

  If you have not yet tried the steps mentioned in the previous post, I suggest that you try the steps and let us know the result.

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

• The procedure entry point DnsGetPrimaryDomainName_UTF8 could not be found in the library of dynamic links DNSAPI.dll

  Hello

  I use windows 2008 standard R2, I am missing _msdcs, _tcp, _udp folders from Server DNS. How can I retrieve it?

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads/

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  the procedure entry point SymSetSymwithAddr64 could not be found in the dynamic library DBGHELP.dll

  Here's a quick fix, do not guarantee to fix but it's worth it.

  Look for your operating system for dbghelp.dll drive. Check the advanced options, search records system, search for hidden files and folders, and search subfolders. Close programs as much as possible. Make sure the results show one in Windows/system32 and other in Windows\system32\dllcache. Right-click on the Windows /system32 and delete it. Wait a few seconds and the supplementary search. You should see it was added back in the dllcache folder and we're in recycler as the image below...

  NOTE: My Windows is under WINNT. Yours is probably Windows.
  

  Restart the computer and see if the problem goes away.

• The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  Running Windows 7 Home premium

  Hi I get this error when I try to add or remove windows features. Before I even tried to change anything, I get this error when I try to access point to add or remove windows features. I just reinstall windows then perhaps it's to do with it?

  ERROR

  The procedure entry point ucrtbase.terminate could not be found in the api-ms-win-crt-runtime-l1-1-0.dll dynamic link library

  If anyone knows what this means or what I have to do to get rid of the error, any help would be accepted with gratitude.

  Best regards Steve

  Hi, I have now discovered what the problem was. It wasn't Office exactly. Rather have just reinstalled windows 7, windows update did not work properly. Virtually no updates had been installed. I had to run the "windows update diagnostic" program from Microsoft support. Once that had solved the problem of update on 180 updates have been installed. Once they have been installed the problem with the error has been resolved. I do not know what update fixed but one of them did.

  Best regards Steve

• The "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll.

  I try to run Rosetta Stone software, however whenever I click on the application link (or shortcut) this annoying message keeps popping up that, according to the "procedure entry point sqlite3_prepare_v2 could not be found in the dynamic link library sqlite3.dll. I studied this before, and there seems to be a problem with Apple/iTunes. But when I deleted iTunes, this question always arises. If there is someone out there or in the it Department which can be useful with this question please help!

  Thank you in advance!

  Hello

  1. are you able to launch the program?

  2. What is the version of iTunes installed on your computer?

  Please follow the methods.

  Method 1:

  Run the Microsoft fixit to uninstall iTunes and check.

  See the link.

  http://support.Microsoft.com/mats/program_install_and_uninstall/

  Method 2:

  Copy the file in the Common Files\Apple\Apple Application Support folder in the Common Apple Mobile Device Support folder and check if it works very well.

• Download this message when I try to run Lightroom. Point procedure entry AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library - system: windows 7 64 bit is no error in the log file

  Download this message when I try to run Lightroom. The procedure entry point AgTransitCargo_pushTransitCargo could not be found in the AgKernel.dll dynamic link library

  system: windows 7 64-bit

  There is no error in the log file.

  no error in scannow at the command prompt.

  

  Hi Michela,

  Lightroom makes a call the the AGkernel.dll file, but the file isn't sure what to do because it can't find the line of code within himself to answer. This can happen for several reasons, that fall within these two broad categories: AGkernel.dll is damaged and must be repaired or AGKernel.dll version is incorrect and should be updated to the correct version.

  Here are some things you can do to fix the file:

  -Record again with Windows AGKernel.dll: https://support.microsoft.com/en-us/kb/249873

  -Windows repair: https://support.microsoft.com/en-us/kb/929833

  -Install all the updates that are available for Windows: Windows Installer updates

  -Uninstall and reinstall Lightroom

  Kind regards

  Tanuj

• When you try to load a game on the Internet I get this error - entry point decode pointer could not be located in the Library dynamic link kernel32.dl

  Original title: need help please

  Please help me I've tried for hours just can't find it try to load the game from the internet charge just before its opening, he said
  error entry point decode pointer could not be located in the Library dynamic link kernel32.dll also tried to download directx said same thing for me
  Please help me thanks
  p

  Hello

  I suggest you try to run the System File Checker
  http://support.Microsoft.com/kb/310747

  It will be useful.

• How to fix the error, "the procedure entry point PK11_PubDerive could not be found in the dynamic link library nss3.dll

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  BlindingFog said

  I use windows 7 and Firefox 39.0. Recently, when I open Firefox it gives this error, 'the entrance of procedure point PK11_PubDerive could not be located in the dynamic link library nss3.dll'. I click on the OK button, and then Firefox load without any other side effects. But this becomes quite annoying and I would not get an error message to me. I tried to uninstall Firefox (all the same when I search for it, nothing comes up) and re-install. But the message is still there. I'm lost for what to do to get rid of him. Any help would be great!

  Thank you!

  I thought about it. I had Cyrstal Reports XI on my machine and when I uninstalled it the error disappeared.