MPS Table version

Hello

I bought a new MSI motherboard and it says MPS Table Version 1.1 or 1.4. Please tell me the right version for Vista Premium 32 bit.

Thank you!

Advertisement

1.4 has been around since 1995. I don't think you'll have any problems with it.

Tags: Windows

Similar Questions

  • Join several Tables versioned

    Hello

    We are working on a data warehousing project and wonder how do to join several tables that each are versioned separately (type SCD 2 with a valid and valid to date).

    Because for example, we get our client from a single source of information (id customer, name, etc.) and the information on the rate of customer from another source.  The sources are different, we have the separate tables for them and each of them gets versioned independently.

    Here's my customer table (with its own valid and valuable to the columns).

    IDName of the customerValid fromValid until the
    1CitiBank1 JANUARY 14JANUARY 1, 15
    1New CitiBank2 JANUARY 15FEBRUARY 1, 15
    1Latest CitiBank2 FEBRUARY 15APRIL 1, 15

    And similarly the Client side ID and rating information.

    IDNoteValid fromValid until the
    1Platinum1 JANUARY 14FEBRUARY 1, 14
    1PremiumFEBRUARY 1, 141ST MARCH 15

    I want to merge the two tables above and present information at a glance.  I have some difficulty to determine validates the valid columns.

    IDName of the customerNoteValid from (Calculated)Valid until the (calculated)
    1CitiBankPlatinum1 JANUARY 14FEBRUARY 1, 14
    1CitiBankPremiumFEBRUARY 1, 14JANUARY 1, 15
    1New CitiBankPremium2 JANUARY 15FEBRUARY 1, 15
    1Latest CitiBankPremium2 FEBRUARY 151ST MARCH 15

    And it's the query I used to get the above result:

    SELECT client. id ,

           customer . name ,

           CRM . level ,

           Greatest (client. vld_fm , crm. vld_fm ),

           Least (client. vld_to , crm. vld_to )

    DE    client client,

           client_rating crm

      client. id = crm. id

           AND ( client. vld_fm <= crm. vld_fm

                 AND client. vld_fm <= crm. vld_to

                 AND client. vld_fm >= crm. vld_fm

                 AND client. vld_fm >= crm. vld_to )

            OR ( client. vld_fm BETWEEN crm. vld_fm AND crm. vld_to )

            OR ( client. vld_to BETWEEN crm. vld_fm AND crm. vld_to );



    The problem is we have several data sources (and each with its own versions) and joins become so very very complex.  Is there a better way to write the query?

    Or maybe a better way to design our tables?

    Thanks for your help.

    Anand

    Hello

    you only need ranges that overlap to join.

    Re: How do to sql query in a loop

    Is a simpler way to test if the x_start to x_stop range comes into conflict with the range of y_start to y_stop

    WHERE     x_start <= y_stop AND     y_start <= x_stop
    

    In other words, two overlapping if and only if everyone will start before the other ends one. If this is not obvious (and it was certainly not clear to me when I heard it), then look at it this way: two ranges are not overlapping if and only if one of them starts after the end of the other.

    Concerning

    Marcus

  • Stuck with trying to get the max of the table version number

    We have a custom table that contains information on the work packages installed.

    Whenever a package is updated, a new entry is added to the table, with an incremented version number.

    Some examples of data:
    GET sampledata
    WITH sampledata AS
         (SELECT 'TEST0003' NAME
               , '1.1' VERSION
               , 'Installed Work Packet TEST 111' description
               , '18-Jul-2003' install_date
            FROM DUAL
          UNION ALL
          SELECT 'TEST0003'
               , '1.2'
               , 'Installed Work Packet TEST 111'
               , '18-Aug-2003'
            FROM DUAL
          UNION ALL
          SELECT 'TEST0003'
               , '1.3'
               , 'Installed Work Packet TEST 111'
               , '18-Sep-2003'
            FROM DUAL
          UNION ALL
          SELECT 'THIS2003'
               , '2.1'
               , 'Something Else'
               , '01-Jul-2009'
            FROM DUAL
          UNION ALL
          SELECT 'THIS2003'
               , '2.2'
               , 'Something Else'
               , '10-Aug-2009'
            FROM DUAL
          UNION ALL
          SELECT 'THIS2003'
               , '2.3'
               , 'Something Else'
               , '15-Nov-2009'
            FROM DUAL)
    SELECT *
      FROM sampledata;
    I would like to know how to return only the most recent version of each package of the table, but I can't get out.

    For example, the sample data above, I would like to only include:
    NAME               VERSION                DESCRIPTION                            INSTALL_DATE
    ---------------------------------------------------------------------------------------------------
    TEST0003           1.3                    Installed Work Packet TEST 111         18-Sep-2003
    THIS2003           2.3                    Something Else                         15-Nov-2009
    I see she has to somehow select MAX (version) for each different "NAME", but can't get my head around the syntax. What I have to GROUP BY "NAME" and then select the MAX (VERSION) of that?

    Any advice much appreciated.

    Thank you

    Thanks for the sample date!
    Yet another version:

    SQL>WITH sampledata AS
      2       (
      3          SELECT 'TEST0003' NAME, '1.1' VERSION, 'Installed Work Packet TEST 111' description,
      4                 '18-Jul-2003' install_date
      5            FROM DUAL
      6          UNION ALL
      7          SELECT 'TEST0003', '1.2', 'Installed Work Packet TEST 111', '18-Aug-2003'
      8            FROM DUAL
      9          UNION ALL
     10          SELECT 'TEST0003', '1.3', 'Installed Work Packet TEST 111', '18-Sep-2003'
     11            FROM DUAL
     12          UNION ALL
     13          SELECT 'THIS2003', '2.1', 'Something Else', '01-Jul-2009'
     14            FROM DUAL
     15          UNION ALL
     16          SELECT 'THIS2003', '2.2', 'Something Else', '10-Aug-2009'
     17            FROM DUAL
     18          UNION ALL
     19          SELECT 'THIS2003', '2.3', 'Something Else', '15-Nov-2009'
     20            FROM DUAL)
     21  SELECT   NAME, MAX(VERSION), MAX(description)KEEP (DENSE_RANK FIRST ORDER BY VERSION) AS description,
     22           MAX(install_date)KEEP (DENSE_RANK FIRST ORDER BY VERSION) AS install_date
     23      FROM sampledata
     24  GROUP BY NAME;
    
    NAME     MAX DESCRIPTION                    INSTALL_DAT
    -------- --- ------------------------------ -----------
    TEST0003 1.3 Installed Work Packet TEST 111 18-Jul-2003
    THIS2003 2.3 Something Else                 01-Jul-2009
    

    URS

  • Quick loss of millions of records in a table with version

    Hello world

    We seek for one of our tables versioned delete and contains about 28 million records.  On Exadata and 11.2.0.3.

    Normally we would just drag the table, but there is a requirement that we keep a number of documents (about 500 k), complete with the story, so that other components of the system related are not lacking (even if these 500 k will also be removed subsequently).

    I did a survey on how we can do that, but a massive factor is to ensure that there is minimal downtime.  A method I've tried is to remove batch of 5 million - if the button Delete merging could take 24 hours in total for each series and we could not afford 6 cases of this.

    I also tried DBMS_WM. PURGETABLE, but this seems to take a long time as well (even with no table to archive being created).

    Copies the records in another table LT, truncate table source and re - insert the records back in 500 k is an option that we looked at, if not ideal.  I think we would also update wm$ modified_tables for it.

    Are there other alternatives that make this possible, or if we were to go down the road of truncated - is there anything else we need to consider in order to maintain the coherence of the WMSYS dictionary?

    Many thanks in advance,

    James

    Hi James,

    Would it not possible to simply do the operation to remove directly in LIVE workspace?  This would eliminate the need to merge the workspace.  Truncation operations do not rely on the tables of the activated version.  Nor is face _LT table to a temporary table and the re-insertinig.  The hierarchy of the workspace and other metadata may have changed in the meantime which would make it invalid reinserted data.  Guaranteeing that nothing else changes it would fix, but is not yet all that is generally supported.

    Delete that number of lines will take some time little matter method.  How long the procedure PurgeTable did?  It is going to be the approach that should be faster by using features of the Workspace Manager.  In addition, if these lines will be deleted anyway, why not just wait until it is safe to do so and do it all at this point in time?  Then you must conditionally delete lines.  You can simply call dbms_wm. DisableVersioning on the table and then delete it.

    Kind regards

    Ben

  • DMZ-Link bandwidth does not change the routing table countin traffic

    Hey guys

    I'm INE laboratories dong and shoved a weird one that delivers.

    I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

    Here is my configuration:

    Rack1R6 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 54.1.1.254 distance-54

    neighbor 54.1.1.254 dmzlink-bw

    neighbour 155.1.67.7 distance-300

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    No Auto-resume

    Rack1R6 (config) #.

    Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 54.1.1.254 0 54 I

    * > 28.119.17.0/24 54.1.1.254 0 54 I

    * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

    * > 114.0.0.0 54.1.1.254 0 0 54 I

    * > 115.0.0.0 54.1.1.254 0 0 54 I

    * > 116.0.0.0 54.1.1.254 0 0 54 I

    * > 117.0.0.0 54.1.1.254 0 0 54 I

    * > 118.0.0.0 54.1.1.254 0 0 54 I

    * > 119.0.0.0 54.1.1.254 0 0 54 I

    r > 155.1.0.0 0.0.0.0 32768 I

    Rack1R6 (config) #do sh ip bgp

    Version of BGP table is 35, local router ID is 150.1.6.6

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254                             0 54 i

    * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

    * > 0 0 54 50 60 54.1.1.254 I

    * i114.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i115.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i116.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i117.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    * i118.0.0.0 204.12.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    *>                  54.1.1.254               0             0 54 i

    * i119.0.0.0 204.12.1.254 0 100 0 54 I

    *>                  54.1.1.254               0             0 54 i

    r i155.1.0.0 155.1.146.4 0 100 0 I

    r>                  0.0.0.0                            32768 i

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

    * 155.1.67.7 0 300 200 254?

    Rack1R6 (config) #.

    # now R4 configuration

    Rack1R4 (config) #do sh run | dry BGP

    router bgp 100

    no synchronization

    The log-neighbor BGP-changes

    BGP dmzlink-bw

    155.1.146.0 netmask 255.255.255.0

    aggregate-address 155.1.0.0 255.255.0.0 summary only

    neighbour 155.1.45.5 distance-200

    155.1.45.5 route-neighbour card GAME-54 on

    neighbour 155.1.146.1 distance-100

    155.1.146.1 neighbor send-community times

    neighbour 204.12.1.254 distance-54

    neighbor 204.12.1.254 dmzlink-bw

    No Auto-resume

    Rack1R4 (config) #.

    Rack1R4 (config) #do sh ip bgp Synt.

    Local router BGP 150.1.4.4 identifier UNDER number 100

    BGP table version is 18, table 18 main routing version

    15 entries for network using 1980 bytes of memory

    18 entries for path using 936 bytes of memory

    9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

    3 entries for BGP AS-path ACCESS using 72 bytes of memory

    1 entries PMO community, using 24 bytes of memory

    0 cache entries of BGP route-map with 0 bytes of memory

    0 cache entries of filter-list BGP using 0 bytes of memory

    Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

    BGP using 4620 total number of bytes of memory

    Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

    Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

    155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

    155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

    204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

    Rack1R4 (config) #do sh ip bgp

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    s > 155.1.146.0/24 0.0.0.0 32768 0 I

    * i205.90.31.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i220.20.3.0 155.1.13.3 0 100 0 200 254?

    *>                  155.1.45.5                             0 200 254 ?

    * i222.22.2.0 155.1.13.3 0 100 0 200 254?

    Network Next Hop path metrics LocPrf weight

    *>                  155.1.45.5                             0 200 254 ?

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

    BGP table version is 18, local router ID is 150.1.4.4

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * > 28.119.16.0/24 204.12.1.254 0 0 54 I

    * > 28.119.17.0/24 204.12.1.254 0 0 54 I

    * > 112.0.0.0 204.12.1.254 0 54 50 60 I

    * > 113.0.0.0 204.12.1.254 0 54 50 60 I

    * > 114.0.0.0 204.12.1.254 0 54 I

    * > 115.0.0.0 204.12.1.254 0 54 I

    * > 116.0.0.0 204.12.1.254 0 54 I

    * > 117.0.0.0 204.12.1.254 0 54 I

    * > 118.0.0.0 204.12.1.254 0 54 I

    * > 119.0.0.0 204.12.1.254 0 54 I

    * > 155.1.0.0 0.0.0.0 32768 I

    * > 205.90.31.0 155.1.45.5 0 200 254?

    * > 220.20.3.0 155.1.45.5 0 200 254?

    * > 222.22.2.0 155.1.45.5 0 200 254?

    Total number of prefixes 14

    Rack1R4 (config) #.

    # and where is the real problem, R1

    Rack1R1(config-Router) #do sh ip bgp

    Version of BGP table is 15, local router ID is 150.1.1.1

    Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

    r SIDE-failure, stale S

    Source codes: i - IGP, e - EGP,? -incomplete

    Network Next Hop path metrics LocPrf weight

    * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

    * > I 204.12.1.254 0 100 0 54 50 60 I

    * i114.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i115.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i116.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i117.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i118.0.0.0 54.1.1.254 0 100 0 54 I

    Network Next Hop path metrics LocPrf weight

    * > I 204.12.1.254 0 100 0 54 I

    * i119.0.0.0 54.1.1.254 0 100 0 54 I

    * > I 204.12.1.254 0 100 0 54 I

    * i155.1.0.0 155.1.146.6 0 100 0 I

    * > I 155.1.146.4 0 100 0 I

    * > 205.90.31.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 220.20.3.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    * > 222.22.2.0 155.1.13.3 0 200 254?

    * i 155.1.45.5 0 100 0 200 254?

    Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

    112.0.0.0/8, version 4 BGP routing table entry

    Paths: (2 available, best #2, table by default-IP-Routing-Table)

    MPIO: eBGP iBGP

    Announced for the update-groups:

    1          2

    54 50 60, (from a customer-RR)

    54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

    Origin, IGP, 0, 100, valid, internal multipath localpref metric.

    DMZ-Link Bw 250 KB

    54 50 60, (from a customer-RR)

    204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

    Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

    DMZ-Link Bw 12500 KB

    Rack1R1(config-Router) #do sh ip route 112.0.0.0

    Routing for 112.0.0.0/8 entry

    Known through 'bgp 100', 200, 0 distance metric

    54, internal type tag

    Last update of 204.12.1.254 ago 00:15:30

    Routing descriptor blocks:

    204.12.1.254, 155.1.146.4, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    * 54.1.1.254, 155.1.146.6, there is 00:15:30

    Path metric is 0, number of shares of traffic 1

    AS hop 3

    Beacon road 54

    Rack1R1 (config - Router) #.

    as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

    can you please help me if I makeover anything in my setup?

    Hello

    Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

  • Non riesco a generare I trigger by the journal tables

    Buonasera,

    utilizzavo tables version 4.1.1 di Data model e riuscivo a generare I trigger by the newspaper, pero utilizzava sempre he nome di table "emp2."

    Nelle note della versione 4.1.2 release it era scritto che he bug era stato solved, pero adesso non riesco più a generare I trigger by the journal tables.

    You can help?

    Grazie

    Davide

    Hello Davide,.

    you are able to run the generation of 'test' as he explained here Oracle SQL Developer Data Modeler 4.1 user - defined DDL generation using transformation scripts

    Do you have a location in "preferences > Data Modeler"-"types of default system directory" - If there is a defined directory it can DM puts the script from that directory - scripts are in the file - dr_custom_scripts.xml. "»

    If you have not changed the scripts distributed with Data Modeler (or add new ones) so you can copy this file in the directory datamodeler\datamodeler\types of DM 4.1.2 installation to the directory defined in the preferences.

    In fact the problem in 4.1.1 DM was in the script itself always putting this 'EMP2' name in the definition of the trigger - line 66 should be modified in order to obtain valid results:

    old line 66:

    "WE DELETE emp2 for each line \n" +

    new line 66:

    "WE DELETE" + lname + ' for each line \n"+"

    Philippe

  • Order by in a partitioned table

    Hi all

    I recently list partitioned table. After the partition, the existing query result was completely different from that of a non-partitioned table.

    CREATE TABLE 'BALANCE_TMP '.

    ("BRANCHID" VARCHAR2 (10 CHAR) NOT NULL,)

    VARCHAR2 (1 CHAR) 'ACCOUNTTYPE' NOT NULL,

    VARCHAR2 (20 CHAR) 'ACCOUNTID' NOT NULL,

    "BUSINESSDATE" DATE NOT NULL,

    'BALANCETYPE' VARCHAR2 (1 CHAR) NOT NULL,

    ("BALANCE" NUMBER (18.3) NOT NULL)

    LIST PARTITION (BRANCHID)

    (

    PARTITION bal_100 VALUES ("100")

    PARTITION bal_101 VALUES ('101')

    PARTITION bal_102 VALUES ('102')

    );

    The query:

    SELECT * OF balance b WHERE ROWNUM < = 1 AND BranchID = '100' AND

    AccountType = 'N' AND AccountID = "100999999613USD" AND BusinessDate <= May 12, 2014 ' AND

    BalanceType = 'A' ORDER BY BusinessDate DESC

    "The account has dates of business March 12, 2003 '-may 12, 2014. The SQL above on partitioned table gives me the folder that has the date of the company March 12, 2013 "and when partitioned may 12, 2014".

    Please let me know what I'm missing here. I'm assuming that partitioning atleast, in this case, is transparent to the SQL code.

    1543042 wrote:

    The same SQL on a non-partitioned table gives me the results expected is the last album of businessdate. On the partitioned table version, it gives me a record earlier.

    I believe you. Most likely date column is indexed. Optimizer decides to use the SORTED INDEX RANGE SCAN and first rank is rank of more recent date. That's why you get the desired result. But it's only because you're lucky optimizer chose a plan where the last line is read first. It is a time bomb which had sooner or later go off.  And that's exactly what happened with the partitioned table. Optimizer realized account of the table is partitioned and probably the use parallel execution plan. Now you have several slave process every single partition handling and using the INDEX RANGE SCAN SORTED for that. So each slave will get the last row in a respective score but then master process will choose one of them when applying ROWNUM<= 1="" and="" here="" you="" are="" at="" the="" mercy="" of="" which="" row="" will="" it="" be.="" and,="" as="" you="" already="" know,="" you="" didn't="">

    SY.

  • How to create the version compressed as a copy of the version of office content.  I tried the + command line Tablet just below the menu bar horizontal, but it creates a blank page and no content from the desktop version

    I tried to create a Table version of the-Tablet command line just below the horizontal menu, but it creates a blank page and no content of the version of office without worrying. I cleared the table and tried several times but no result.

    Just look closely at the opoins:

    Here is no option to copy the content of a page

  • fragmentation of the table

    Hi all

    Oracle 8i (8.1.7)

    Solaris

    Name of the table: activity

    size: 22GB

    Actual data: 10 GB

    Wasted space: about 12 GB

    having 7 index

    Here is my intention to remove the waste space what is the best method?

    plan do sql > alter table activity colsec;   This is the good method or what I need to do something...?

    If I allow the movement of the line, what will be the impact?

    Thank you

    Mike.

    plan to release unused space in the table using activity below methods... I mean what method will be the best to do online (hours not... his production company,...), and including a quick and the better... Please advise.

    Method 1:

    SQL > alter table activity merge;

    Method 2:

    SQL > alter table activity release unused space.

    SQL > alter index acivity_idx_1 free unused space.

    Thank you

    Mike.

    This will depend on the ability of the system... I hope it using your legacy software/hardware... ... better sure .not to .test it on the test machine.

    Merge and methods 'remove unused space allocation"will serve to free up space on the db when you those who shot, but they are his own.

    Please refer below link...

    Oracle8i Database Search Results: 'alter table' (version 8.1.7)

  • Unlink the Table entity on the engineer to relational

    I imported a table from a database Oracle, built it logical, made changes to SQLServer, want to now reverse to a new table, but the entity is always related to the oracle of the table version, which has been renamed.  How to break the synch and create a new table?  I don't want to keep the original table in the relational model.

    I came up with a workaround.  Two models to relational, one for Oracle and one to the MSSS.

  • Why "FULL TABLE SCAN?

    I have a table with 831 k lines and index:
    CREATE TABLE "ROGADM"."ROG_LOG" (
        "LOG_ID"       NUMBER(10,0),
        "LOG_OBK_TYP"  VARCHAR2(30 BYTE),
        "LOG_OBK_ID"   VARCHAR2(200 BYTE),
        "LOG_TYP"      VARCHAR2(30 BYTE),
        "LOG_RODZAJ"   VARCHAR2(30 BYTE),
        "LOG_R_OBK_ID" VARCHAR2(200 BYTE),
        "LOG_DATA_ZDARZENIA" DATE,
        "LOG_OPIS_ZDARZENIA" VARCHAR2(4000 BYTE),
        "LOG_UTWORZYL"       VARCHAR2(30 BYTE),
        "LOG_KIEDY_UTWORZYL" DATE,
        CONSTRAINT "LOG_PK" PRIMARY KEY ("LOG_ID")
    );
    CREATE INDEX "ROGADM"."LOG_I" ON "ROGADM"."ROG_LOG" (
        "LOG_OBK_ID",
        "LOG_OBK_TYP",
        "LOG_TYP",
        "LOG_RODZAJ"
    );
    CREATE INDEX "ROGADM"."LOG_I2" ON "ROGADM"."ROG_LOG" (
        "LOG_R_OBK_ID",
        "LOG_RODZAJ"
    );
    CREATE UNIQUE INDEX "ROGADM"."LOG_PK" ON "ROGADM"."ROG_LOG" (
        "LOG_ID"
    );
    When I run of EXPLAIN PLAN for the sql:
    SELECT log_obk_id FROM rog_log;
    the output is
    PLAN_TABLE_OUTPUT
    Plan hash value: 3822058985
     
    -----------------------------------------------------------------------------
    | Id  | Operation         | Name    | Rows  | Bytes | Cost (%CPU)| Time     |
    -----------------------------------------------------------------------------
    |   0 | SELECT STATEMENT  |         |   831K|  8122K|  2240   (2)| 00:00:27 |
    |   1 |  TABLE ACCESS FULL| ROG_LOG |   831K|  8122K|  2240   (2)| 00:00:27 |
    -----------------------------------------------------------------------------
    Why?

    You have an index on the LOG_OBK_ID column. But when you select this column see you FULL TABLE SCAN and no index is used.

    This is because you have not set your column as NOT NULL value column. Oracle stores a NULL value in the index. And that is why when you query the table for LOG_OBK_ID he goes to the table and does not use the index.

    See the example below

    SQL> create table my_test ( object_id number not null, object_type varchar2(100), object_name varchar2(100));
    
    Table created.
    
    SQL> create index my_test_idx on my_test(object_id, object_type);
    
    Index created.
    
    SQL> insert into my_test
      2  select object_id, object_type, object_name
      3    from all_objects
      4   where rownum <= 100000
      5  /
    
    50058 rows created.
    
    SQL> commit
      2  /
    
    Commit complete.
    
    SQL> exec dbms_stats.gather_table_stats('KARTHICK_PATTABIRAMAN','MY_TEST',cascade=>true)
    
    PL/SQL procedure successfully completed.
    
    SQL> explain plan for select object_id from my_test
      2  /
    
    Explained.
    
    SQL> select * from table(dbms_xplan.display)
      2  /
    
    PLAN_TABLE_OUTPUT
    --------------------------------------------------------------------------------
    Plan hash value: 720752151
    ------------------------------------------------------------------------------------
    | Id  | Operation            | Name        | Rows  | Bytes | Cost (%CPU)| Time   |
    ------------------------------------------------------------------------------------
    PLAN_TABLE_OUTPUT
    --------------------------------------------------------------------------------
    |   0 | SELECT STATEMENT     |             | 50058 |   244K|    36   (0)| 00:00:01 |
    |   1 |  INDEX FAST FULL SCAN| MY_TEST_IDX | 50058 |   244K|    36   (0)| 00:00:01 |
    ------------------------------------------------------------------------------------
    
    8 rows selected.
    

    See the index is used. Oracle considers the index as a Skinny table version and do a FULL scan on the INDEX and not on the TABLE.

    Now, let us remove the NOT NULL constraint and see what happens.

    SQL> alter table my_test modify object_id null
      2  /
    
    Table altered.
    
    SQL> desc my_test
     Name                                      Null?    Type
     ----------------------------------------- -------- ----------------------------
     OBJECT_ID                                          NUMBER
     OBJECT_TYPE                                        VARCHAR2(100)
     OBJECT_NAME                                        VARCHAR2(100)
    
    SQL> exec dbms_stats.gather_table_stats('KARTHICK_PATTABIRAMAN','MY_TEST',cascade=>true)
    
    PL/SQL procedure successfully completed.
    
    SQL> explain plan for select object_id from my_test
      2  /
    
    Explained.
    
    SQL> select * from table(dbms_xplan.display)
      2  /
    
    PLAN_TABLE_OUTPUT
    --------------------------------------------------------------------------------
    Plan hash value: 1615681525
    
    -----------------------------------------------------------------------------
    | Id  | Operation         | Name    | Rows  | Bytes | Cost (%CPU)| Time     |
    -----------------------------------------------------------------------------
    |   0 | SELECT STATEMENT  |         | 50058 |   244K|    67   (0)| 00:00:01 |
    |   1 |  TABLE ACCESS FULL| MY_TEST | 50058 |   244K|    67   (0)| 00:00:01 |
    -----------------------------------------------------------------------------
    
    8 rows selected.
    
    SQL>
    

    See oracle now goes for FULL TABLE SCAN.

  • It is possible to have two tables with the same name in Oracle!

    Oracle Version: 10 gr 2

    MS Access 2007, I had to use the 'Export' by which I copy a table (and its data) to an Oracle schema via an ODBC connection. Later, I realized that, during the copy of tables with a mix of lower and upper case names, the table does not copied (exported). But MS Access will give you the message that table obtained export successfully.

    MS-Access mess around Oracle data dictionary.

    When you issue
    SQL>select * from tab;
    
    TNAME                          TABTYPE  CLUSTERID
    ------------------------------ ------- ----------
    AMStates                       TABLE
    Version                        TABLE
    You will see the names of the tables. But when you try to DESCRIBE or SELECT this table, you will
    SQL>desc Version
    ERROR:
    ORA-04043: object Version does not exist
    You can even create another table with the same name in the schema
    SQL>create table VERSION (X NUMBER);
    
    Table created.
    Why this is happening and how can I bring these items 'non-existent '?

    Hello

    Use

    SQL > desc 'Version '.

    Or

    SQL > select * from 'Version '.

    Or

    SQL > drop table 'Version '.

    To overcome the problems of mixed-case.

  • Create cursors programmatically with custom properties

    Hello!

    I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

    The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

    Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

    In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

    Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

    Thanks for your help!

    Chris

    Kokomoking wrote:

    Hello!

    I have problems creating cursors by programming in Labview 2009. Basically, I have an image that is rendered as a table. When you press a button, I want about 7 sliders to appear on the graph of the intensity of my image. I then want to read values from the sliders (z-values) and do some calculations base with them.

    The Labview help says to use the CursorList property to create sliders so I understand. I am trying this now, as follows:

    Create the property node and the link to the image. Choose the property of CursorList. Right click and create constant. Then I'm trying out the different sliders with the index of table vi, change their names to 1-7. Then I thought to put their back with the cluster vi version, but it does not work.

    In the future, I would like to set several properties of each slider (and not just the name). What is the right approach for my problem? I did a search on the topic, but nothing useful came. Please point me to a thread that I might have missed.

    Is attached a screenshot of my problem... How to create several cursors at a time by programming with some properties tuned to my taste?

    Thanks for your help!

    Chris

    Do not build Bay cluster. Just use build array (programming-> table-> table of generation). Who should take care of your cut wire. When you use the cluster table version, it builds your cluster in ANOTHER group that is not what you want.

    The table of index VI is also extensible (click on the lower part of it and drag). In this way, that you don't need 8 of them on your drawing.

  • Questions about N3024 switch by default - originate BGP

    Here is the configuration of the two switches.  I set up and rising BGP, passing of prefixes.  I want 1 switch to send a default gateway to switch 2 and have the default installation of command on the next statement are created.  I don't see the 0.0.0.0 route by default in the show ip bgp sum command, but which is detailed in the configuration guide.  However, I don't see a default route 0.0.0.0 in the routing table for switch 2 at all and an error message that there is no default route available.  Would I be missing here?

    Config is below:

    SWITCH 1

     

     

     

     

    Configure

    VLAN 50

    output

    VLAN 50

    name "switchtest".

    output

    hostname "Switch_1.

    location 1/0 1! Dell network N3024

    battery

    1 1 member! N3024

    output

    IP routing

    !

    loopback interface 1

    IP 10.0.0.1 address 255.255.255.255

    IP ospf area 0

    output

    interface vlan 1

    DHCP IP address

    output

    interface vlan 50

    172.16.0.1 IP address 255.255.255.252

    IP ospf area 0

    output

    router ospf

    router ID 10.0.0.1

    10.0.0.1 network 255.255.255.255 area 0

    network 172.16.0.0 255.255.255.252 area 0

    output

    !

    item in gi1/0/1 interface

    Description 'Switch '.

    switchport access vlan 50

    output

    Server SNMP engineid local 800002a203f8b1566f36c4

    router bgp 65001

    router BGP 10.0.0.1 ID

    172.168.0.0 netmask 255.255.255.252

    10.0.0.1 netmask 255.255.255.255

    172.16.0.2 neighbor remote - as 65002

    neighbor 172.16.0.2 are created by default

    output

    output

    Switch_1 #show ip bgp

    BGP table version is 7, local router ID is 10.0.0.1

    Status codes: s removed, * valid, > best, i - internal

    Source codes: i - IGP, e - EGP? -incomplete

    Network Next Hop metric LocPref path origin

    ------------------- ---------------- ---------- ---------- ------------- ------

    * > 172.16.0.0/30 172.16.0.2 1 100 65002 I

    * > 192.168.100.0/30 172.16.0.2 1 100 65002 I

    * > I have 10.0.0.1/32 0.0.0.0 1 100 I

    * > 10.0.0.2/32 172.16.0.2 1 100 65002 I

    Switch_1 #show ip bgp sum

    IPv4 routing... Enable

    BGP Admin Mode... Enable

    BGP router ID... 10.0.0.1

    Local AS number... 65001

    Traps ......................................... Disable

    Maximum paths... 1

    Maximum paths IBGP... 1

    Default Keep Alive Time... 30

    Default hold time... 90

    Number of entries of network... 4

    Number of PATHS... 1

    Default metric... Not configured

    Advertise default route... NO.

    Redistribution:

    Dist metric list of source route map

    --------- ---------- -------------------------------- --------------------------------

    Neighbor ASN MsgRcvd MsgSent State down time Pfx Rcvd

    ---------------- ----- -------- -------- ------------- -------------- ---------

    172.16.0.2 65002 78 82 ESTABLISHED 0:00:23:24 3

    Switch_1 #show ip route

    The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static

    B - Derived E - from outside, AI - BGP OSPF Inter zone

    E1 - OSPF external Type 1, E2 - OSPF external Type 2

    N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2

    S U - unnumbered Peer, L - flight road

    * Indicates the best route (the lowest metric) for the subnet.

    No default gateway is configured.

    *10.0.0.1/32 C [0/1] directly connected, Lo1

    B *10.0.0.2/32 [20/1] via 172.16.0.2, Vl50

    10.0.0.2/32 [110/11] via 172.16.0.2, Vl50

    *172.16.0.0/30 C [0/1] directly connected, Vl50

    B 172.16.0.0/30 [20/1] via 172.16.0.2, Vl50

    B *192.168.100.0/30 [20/1] via 172.16.0.2, Vl50

    192.168.100.0/30 [110/20] through 172.16.0.2, Vl50

    SWITCH 2

    Configure

    VLAN 50 100

    output

    VLAN 50

    name "SwitchTest".

    output

    VLAN 100

    name of the 'Switch '.

    output

    hostname "Switch_2".

    location 1/0 2. Dell network N3024F

    battery

    1 2 Member! N3024F

    output

    IP routing

    !

    loopback interface 0

    output

    !

    loopback interface 1

    10.0.0.2 IP address 255.255.255.255

    output

    interface vlan 1

    DHCP IP address

    output

    interface vlan 50

    IP 172.16.0.2 255.255.255.252

    IP ospf area 0

    output

    interface vlan 100

    IP 192.168.100.1 255.255.255.252

    output

    router ospf

    router ID 10.0.0.2

    10.0.0.2 network 255.255.255.255 area 0

    network 172.16.0.0 255.255.255.252 area 0

    network 192.168.100.0 255.255.255.252 area 0

    output

    !

    interface item in gi1/0/23

    switchport access vlan 100

    output

    !

    interface item in gi1/0/24

    Description 'Switch '.

    switchport access vlan 50

    output

    Server SNMP engineid local 800002a203f8b156530097

    router bgp 65002

    router BGP 10.0.0.2 ID

    172.16.0.0 netmask 255.255.255.252

    192.168.100.0 netmask 255.255.255.252

    10.0.0.2 netmask 255.255.255.255

    neighbor remote - as 65001 172.16.0.1

    output

    output

    Switch_2 #show ip bgp

    Version of BGP table is 9, local router ID is 10.0.0.2

    Status codes: s removed, * valid, > best, i - internal

    Source codes: i - IGP, e - EGP? -incomplete

    Network Next Hop metric LocPref path origin

    ------------------- ---------------- ---------- ---------- ------------- ------

    * > I have 172.16.0.0/30 0.0.0.0 1 100 I

    * > I have 192.168.100.0/30 0.0.0.0 1 100 I

    * > 10.0.0.1/32 172.16.0.1 1 100 65001 I

    * > I have 10.0.0.2/32 0.0.0.0 1 100 I

    Switch_2 #show ip bgp sum

    IPv4 routing... Enable

    BGP Admin Mode... Enable

    BGP router ID... 10.0.0.2

    Local AS number... 65002

    Traps ......................................... Disable

    Maximum paths... 1

    Maximum paths IBGP... 1

    Default Keep Alive Time... 30

    Default hold time... 90

    Number of entries of network... 4

    Number of PATHS... 1

    Default metric... Not configured

    Advertise default route... NO.

    Redistribution:

    Dist metric list of source route map

    --------- ---------- -------------------------------- --------------------------------

    Neighbor ASN MsgRcvd MsgSent State down time Pfx Rcvd

    ---------------- ----- -------- -------- ------------- -------------- ---------

    172.16.0.1 65001 83 82 ESTABLISHED 0:00:24:32 1

    Switch_2 #show ip route

    The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static

    B - Derived E - from outside, AI - BGP OSPF Inter zone

    E1 - OSPF external Type 1, E2 - OSPF external Type 2

    N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2

    S U - unnumbered Peer, L - flight road

    * Indicates the best route (the lowest metric) for the subnet.

    No default gateway is configured.

    B *10.0.0.1/32 [20/1] via 172.16.0.1, Vl50

    10.0.0.1/32 [110/11] via 172.16.0.1, Vl50

    *10.0.0.2/32 C [0/1] directly connected, Lo1

    *172.16.0.0/30 C [0/1] directly connected, Vl50

    *192.168.100.0/30 C [0/1] directly connected, Vl100

    Switch_2 #show ip route 0.0.0.0

    The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static

    B - Derived E - from outside, AI - BGP OSPF Inter zone

    E1 - OSPF external Type 1, E2 - OSPF external Type 2

    N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2

    S U - unnumbered Peer, L - flight road

     * Indicates the best route (the lowest metric) for the subnet.

    No default gateway is configured.

    No route found.

    Solution:

    Dell switches need to be turned on in the config.

    router bgp * AS number *.

    default-information originate always

  • Windows 7 will not shut down or restart my computer. I tried all of the suggestions I've seen previously displayed.

    My computer shuts down fine with Vista (64-bit), but not with Windows 7 (Home Ultimate, 64-bit).  It disconnects me and shows the "Stop" screen, access the drive hard as if he does something, but never closes my computer (or monitor) off the coast.  It's the same thing when I'm saying Windows restart my computer.  I always hold the power button to turn off.  Occasionally, the next time I start up, I get a message saying that the computer has been shut down unexpectly, but usually not.  Although I don't think that this issue is damaging physically my computer, it is still an annoying problem.

    So far I have tried:

    -Modification of the settings in my BIOS ACPI.  I don't have the ability to toggle ACPI, only to change between 1 & 3.  I tried them both.

    -Method of "Clean boot" Troubleshooting Microsoft.  Even with all non-essential services and startup items disabled, I always have this problem.

    -Disable Windows Fax.  Only one had this problem, and so I thought I would give it a shot.  Not good.

    -Another forum suggested turning off the M-Audio card.  Tasted it.

    -Yet another forum suggested changing "power settings" in the device to the IEEE Bus controller Manager 1394, allowing the computer stop the computer, or something in this sense.  I see no option anywhere to change the power settings.

    Suggestions of new, I can add to the list?

    After reading a lot on the forums and tried almost everything, patches, disabeling energy efficient features on IEEE 1394 and usb. He hit me, everything indicates that the acpi on the motherboard and the table mps. Changing from 1.4 to 1.1 in the bios MPS table solves the problem and win 7 shutsdown correctly

    ET1

Maybe you are looking for


HashFlare