Mr. Fix it cannot fix the DVD/CD, reading and writing problem

I had a problem a few months ago this onc I put a CD in the CD/DVD drive, it can't read and rejected and ask to put a readable CD, then I run Mr. Fix and the problem disappeared. recently just the same problem, I tried Mr.Fix but it cannot solve the problem, then it is there another way to solve the problem

Best regards

Ramzi salameh

Hello

Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.

Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

Forums - much real experts help and hardware information
http://Club.myce.com/

I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

Tags: Windows

Similar Questions

  • Satellite A200 PSAF0A - cannot use the DVD writer / reader more

    Hello
    Anyone has any advice on this?

    Laptop: Satellite A200, PSAF0A
    Require: DVD burner / player sofware.

    My hard drive died last week, so a techno guy installed a new and reinstalled the OS (Vista)... everything works fine. But don't have Toshiba Utilities for the use of the DVD burner / player more. Where is it? I downloaded the player to DVD from Toshiba, but it does not work. It doesn't do anything. Media player plays sound but no video.

    The software that I used to play DVDs accompanying the package when I bought it; InterVideo WinDVD I remember well.
    I downloadeded V 8, but it does not work either. I need Codecs etc, right?

    Looked at Toshiba Europe site for the DVD player, but I think it's the same DVD s/w that I have already downloaded.
    But there is no download of my model, PSAF0A (Satellite A200) in all cases.

    I do not have the CD - they are comfortable in another country! (Unless, of course, my nephew is using them as a frisbee that could well be the case). Help!

    It seems that Toshiba do not publish the DVD software on the site... maybe its due to the issues of the region / license?

    Try AVS DVD Player (its free).
    If you need a MPEG2 codec, install ffdshow

    The two are in http://www.free-codecs.com

  • Satellite M40 - DVD / CD player - reading and writing problems

    My M40-704 has developed a habit of not recognizing some discs DVDs and also a few CDs. This is unrelated to the quality is very difficult to find what exactly is the cause. I have the TOSHIBA DVD-ROM SD-R6112 drive. On an another Tosh I have for work (a Tecra) I have a NEC drive, which works very well. I'm stumped and annoyed.

    Right now I can't read all white or written on DVD/R is the most annoying question... Is this just a reader of trash? I wait too long? Yours confused

    Hello

    You know that not all CD/DVD media are compatible with all readers.
    As far as I know that you will find information about the support of CDs and DVDs in the user manual.
    However, I use TDKs and I m very satisfied with them.
    In my opinion, you should test several media.

  • "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

    When I insert one no matter what DVD in my Dvd Player, I get a message indicating

    "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

    I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

    When I insert one no matter what DVD in my Dvd Player, I get a message indicating

    "Windows Media cannot play the DVD because no compatible DVD decoder is not installed on your computer"

    I have Windows XP Professional, I have not played a DVD on the computor in several months. How can I fix this.

    =========================================
    If you have a DVD decoder (for example Power DVD) try reinstalling it.

    If it is not... Take a look at the following site:

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    Also, you could try one of the players following freeware that will play DVDs:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    VLC Media Player
    http://www.videolan.org/

    Media Player Classic
    http://www.filehippo.com/download_media_player_classic/
    (just unzip and run it... (no installation required)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)

    Also, it may be interesting to try to install one of the following Codec Packs:

    * Proceed at your own risk *.

    (1) news of CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

    (2) K-Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Windows media player cannot play the DVD because the disc prohibits playback in your region of the world.

    "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "I'm getting it on all the DVD and video files now. Have downloaded new codacs did not help. Have you tried the fix auto, has not helped. Tried to download Media Player 11 but keep getting redirected to the checkout page. I have a valid version of windows Vista 32-bit.

    original title: windows media player

    The following article might be worth a visit.

    Windows Vista - change DVD region
    http://grok.LSU.edu/article.aspx?articleid=2334

    Please be aware that when you used all permits
    changes (5 max) region... it will stay on the last region.

  • cannot eject the dvd from studio 1737

    cannot eject the dvd from studio 1737 laptop

    Hello

    If they don't help then check with the manufacturer of system and/or car manufacturer
    Support, their documentation online and drivers and ask questions in the forums (if any) on
    known issues.

    The drive is just stuck?

    For the readers of the status bar:

    Sometimes they get stuck. There is a small hole on the front of the CD drive that you can
    wand, a paper clip that will release him and the reader to open.

    Create a trombone in car Opener
    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    Open a CD/DVD player with a paper clip.
    http://www.josepino.com/?open_cd-dvd_paperclip

    =================================

    For the readers of the slot:

    Check with the manufacturer of system on how do to eject the disc.

    Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">
    http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject

    Be careful as you may damage the player using the method below:

    You may need to get the driver to work 1 However, this could still work.
    http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html

    The method used on the Mac could work
    http://www.YouTube.com/watch?v=wpWieIoBBrk

    How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">
    http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330

    Also have heard double tape on a credit card or play can work.

    -----------------------------------------------------------------------

    You can probably find more info here with a CD/DVD-related hardware problems.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • Get an error "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

    * Original title: wrong Region

    Windows Media Player will not play CD - advise

    "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. "

    Note I am eager to play a CD and it is recognizing a DVD?

    can anyone help

    Hello

    1. what version of Windows is installed on the computer?

    2. what version of Windows Media Player is installed on the computer?

    3. what region is your currently defined DVD player on?

    4. are you able to play other DVDs?

     

    Please follow the provided steps and update us with the results.

    Note: All the steps apply to Windows 7

    Method 1: Try to change the region of the DVD player and check the result. To do this, try the following steps:

    a. Click Start, click computer.
    b. right click on the DVD drive, and then click Properties.
    c. click on the Hardware tab, click the properties button and modify the DVD of the region.

     

    Method 2: Uninstall the DVD player and check.

    a. Click Start, type devmgmt.msc and press to enter.

    b. develop DVD players, right click on the sub element and click on uninstall.

    c. restart the computer and check the result.

    Once you restart the computer, the DVD driver will be loaded automatically.

    d. try to play the DVD and check the result.

     

    You can run the troubleshooting Windows Media Player DVD Troubleshooter and check that it helps.

    Open the Windows Media Player DVD Troubleshoot utility

    http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter

    Let us know if it helps!

  • I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

    DVD decoder not installed?

    I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
    A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?

    I tried to play one of the same DVDs I played before... same message.  Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.

    Thanks if anyone can help.

    Yes, and if you install the utility on your system, you'll see all decoders.

    The utility will also tell you if a decoder is compatible or not.

    Using Media Player version 10 or 11?

    the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert).   It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.

    because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)

    So great to have the entry of a person who knows what he's doing.  Thanks again. I will try the Windows Media Player later and see if I have his use of return.

    Have a great day!

  • How can I solve this problem on Media Player? Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

    Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.

    FWIW... Win XP cannot natively recognize Commercial
    DVD video... it requires a DVD decoder.

    If you could play before commercial video DVD...
    do a system restore to a time before this started
    may be your solution.

    Or you could buy a DVD decoder at the following link:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    (948247) how to set a system restore
    point in Windows XP
    http://support.Microsoft.com/kb/948247

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    Or you can download and use one of the following
    freeware multimedia players:

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)

    Or... you can try to download and install one of
    the following Codec Packs.

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    * Proceed at your own risk *.

    (1) K-Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/
    (Win XP / Vista / Win 7-32 bit and 64 bit)

    (2) information on CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
    (Windows 7, Vista and XP SP1 and above - 32-bit and 64-bit)

    Good luck...

  • Error message "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer"

    Original title: Windows Media Player

    All of a sudden, I get the following error message when I try to use Windows Media Player 11: "Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer."  Never had this problem, or a message in the past.

    Hi RRobb,

    ·         Did you do changes on the computer before the show?

    Follow these methods.

    Method 1: If you have a DVD decoder (for example Power DVD) try reinstalling it.

    How to change or remove a program in Windows XP

    http://support.Microsoft.com/kb/307895

    If this is not the case, see the following link:

    Plug-ins for Windows Media Player

    http://www.Microsoft.com/windows/windowsmedia/player/plugins.aspx

    Method 2: Perform a system restore if the problem occurred recently.

    How to restore Windows XP to a previous state

    http://support.Microsoft.com/kb/306084

  • How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.

    How can I fix the following in "Scanner and Camera Wizard" error message an error occurred while setting scanner preferences.   I have widows xp pro

    Hi Plumbbgp,

    1. what brand & model of the scanner?

    2. the scanner was working fine before?

    3. don't you make changes on your computer before this problem?

    Please provide us with more information about the issue so that we can provide you with the necessary assistance.

  • How can I fix the link between adobe and windows if I see .pdf not win32 application

    How can I fix the link between adobe and windows if I see .pdf not win32 application, without the disc?

    "Adobe" is the name of the company that provides a great many different applications.

    Adobe Reader is free and allows you to view pdf files.

    Adobe Acrobat is expensive and allows you to create, edit and view pdf files.

    Assuming that you are referring to the reader, uninstall all the versions of it using the control panel > add or remove programs.  Then either

    1. go to http://get.adobe.com/reader/?promoid=BUIGO and download the current version (remember to uncheck the box to install McAfee Security Scan Plus.

    or

    2. go to http://www.foxitsoftware.com/Secure_PDF_Reader/ and download Foxit Reader, a small pdf reader and many more.

    Then, install the reader that you have downloaded.

  • Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

    Original title: unable to play any DVD

    "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

    I tried to update all the drivers but the problem persists

    Hi Neil,

    1. have you made any hardware changes or software on the computer before this problem?

    2. what version of windows Media Player do you use?

    You can follow this link & check if the problem persists.

    Windows Media Player Error Message help


    Reference:
    How to troubleshoot issues that occur when you play a DVD in Windows XP?

    Hope the helps of information.
    Please post back and we do know.

  • Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

    Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

    Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

    ====================================
    FWIW... Win XP cannot natively recognize Commercial
    DVD video... it requires a DVD decoder.

    If you could play before commercial video DVD...
    do a system restore to a time before this started
    may be your solution.

    Or you could buy a DVD decoder at the following link:

    (FWIW... it's always a good idea to create a system)
    Restore point before installing software or updates)

    Info about DVD decoders:
    Plug-ins for Windows Media Player
    http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-ins

    Or you can download and use one of the following freeware
    media players:

    VLC Media Player
    http://www.filehippo.com/download_vlc/
    (works on XP/Vista/7)

    Media Player Classic Home Cinema
    http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
    (works on XP/Vista/7)

    Or... you can try to download and install one of the
    Following codec packs.

    (FWIW... it is always preferable, if you create a system restore
    point before installing any software or updates).

    * Proceed at your own risk *.

    (1) K-Lite Codec Pack (full)
    http://www.filehippo.com/download_klite_codec_pack/

    (2) information on CCCP (combined Community Codec Pack)
    http://www.CCCP-project.NET/wiki/index.php?title=Main_Page

    Good luck...

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

  • Cannot read DVDs, error: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer

    DVD playback problem started today.  SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot.  I have not had this problem before.

    Hi RosemaryHanna,

    Thanks for posting in the Microsoft community!

    I understand that you are unable to read the DVD. I will try to help you with this question.

    (1) did you make any changes before the show?

    (2) the video works fine when playing any video recorded or audio files on the computer?

    Method 1: Solve the video issues in Windows Media Player and other media or library

    http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0

    Method 2: You can see the steps mentioned in the article below

    Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista

    http://support.Microsoft.com/kb/306331

    Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.

Maybe you are looking for