Mr PRESIDENT, MY WINDOWS 7 32 BIT PC does not support to open 'Copy trans drivers install' to copy doc, to the iphone

Similar Questions

• Windows 7 (64 bit) - smartmenu does not

  Hello

  I have re-installed windows 7 after that hdd has stopped working. I did it to each update (update of windows assistant hp, etc.). But my smartmenu does not work properly. I would like to use keyboard shortcuts for volume control (it works but I can't see what I'm doing; + or - the voice), webcam (can't find the quick icon) and other things.

  Is there anything missing?

  BTW, the system restore dvd, I made did not work when I need them. I spend 10 DVDs for this (4 of them gave error by making the copy). So I had to install the iso of windows in a foreign language for me!

  Kind regards

  Hello

  If its reports that it has not installed properly, it may be worth trying the following.

  First of all, if HP MediaSmart SmartMenu is listed in programs and features, right click, select uninstall and when finished, restart the laptop.

  Download the installer again and save it to your folder Dwonloads.

  HP MediaSmart SmartMenu - Windows 7.

  download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  open your download folder, click with the right button on the HP MediaSmart SmartMenu Installer, select Extract 7 - Zip, select the files, and then click Ok.  Open the newly extracted folder and go to SmartMenu\hp\tmp\src, then click with the right button on SmartMenuSetup64 and select "Run as Administrator".

  When finished, restart the computer again and let Windows load completely for a few minutes before checking it in.

  DP - K

• Windows 7 64 bit, Winupdate does not.

  Hi, I asked to make a new specific thread for my question.

  I have an Acer Aspire 5741 G computer laptop that I bought 3 days ago, I had Windows 7 Home premium (64-bit), and I can't use windows update. It came with Mcafee antivirus and some internet Norton Security, I uninstall both right to the race start, I don't like one of them.

  I don't have any other firewall or antivirus on the computer, except windows defender that I don't know how to disable.

  1. download and Save AppRemover

  2. Although this page States that the Fixit does not apply to Windows 7, this is the case, download and Save it.
  http://support.Microsoft.com/kb/971058

  3. once download completed, read this - using AppRemover

  4. Configure the boot cleaning system

  5. once the system has been rebooted to clean boot state, run AppRemover, choose remove a security application and remove any debris detected McAfee and Norton.

  6. now run MicrosoftFixit50202.msi and choose his Aggressive mode with the system connected to the internet.
  Restart the system for the clean boot state, once it is completed.

  7. see if the system can search for and detect the updates needed now by opening Windows Update in Control Panel.

  8. If the system can find and detected the necessary updates, you can either try to download and install while remaining in the clean boot state, or configure the system to boot into normal mode of Windows and see if she can find, detect, download, and install necessary updates.

  9. you must always install antivirus software. Avast and Microsoft Security Essentials are both free, reliable and works well with Windows 7.
  Then create a Standard user account in order to avoid most malware infections that are caused by vulnerabilities in the OS (approximately 64%).
  Configuring Windows 7 for a limited user account

  MowGreen Services update - consumer safety

• Why windows 7 (64 bit) download does not work for a hp officejet 5610 all-in-one?

  I changed operating systems from XP to Windows 7 (64 bit) on a new Toshiba Portege laptop and downloaded the new drivers from the HP site for my all-in-one Officejet 5610.  Nothing went well.  I can print but not scan, and often copy is extremely slow for no apparent reason.

  I deleted the driver downloaded several times and re-uploaded to start from scratch, but get the message "Fatal error during installation."  I used HP correction for this, did everything it says and ran the download as an administrator.  When the "USB connection" screen, I connect the USB as requested, and I hear my computer accepts this connection.   But the HP installer does not accept or acknowledge inserting the USB key.  It hangs at that time here, and keeps installation disc FOREVER chasing the USB connect screen.

  When I open the HP Solution Center, he informs me that he cannot work because the download of device is not complete.

  There is no file 'help' in the menu 'start '.

  I'm running out of ideas on how to make my printer work properly with the new Windows 7 system.

  Someone at - it suggestions?

  In the case where you hear the ding that the USB cable is connected and that the software does not recognize it, it means that at any given time you connected to the computer via the USB port before running the software. When you do so, Windows takes over and tries to install their own drivers. That causes problems later, when you try to use the software, as it will then not connect when you use the USB cable.

  In this case, you must connect via the usb port and go into Device Manager and remove everything related to your printer. After you do this, unplug the USB cable and restart your computer. When starting BACK, run the software FIRST and then when he asks the USB cord this time, it should recognize the connection.

• Windows 7 does not allow you to copy tapes through the USB to the computer... need help!

  I bought a cassette/converter of Grace Digital Audio Player to convert cassettes to MP3 files on my computer (HP laptop Pavilion DV 7/Windows 7 64-bit). Directions say to just plug into the USB port, press Play on the machine and press Record on the Audacity software.  It copies the music... and all the other noises in the room.  I tried to disable the microphone from the computer... but then it won't copy the music at all.  I called the manufacturer of the product through and they say it's a Windows 7 problem.  So, how can this work?  Thanks for any help you can give me...

  Hello

  Follow the steps mentioned below.

  (a) plug one end of the audio cable into the headset of your cassette player or 'Line' jack out and the other end into 'Micro' of the sound card on your computer or "Line in" jack. To avoid any possible damage sound card, use if possible 'in Line' decision and not the "Microphone".

  (b) launch Audacity and change the type of entry 'in Line' or 'Microphone', depending on what jack of the soundcard you are using. This indicates Audacity to record everything he "hears" the map of sound input. To do this, open the menu editing, then Preferences. You will then see a screen that should do what you need: use the "Device" selector to choose your entry (sound card, microphone, audio jack, etc.) and change the 'Channels' selector to choose between mono or stereo recording.

  (c) press the record button on Audacity, then press play on your cassette (red circle).

  (d) press the stop (yellow square) on Audacity when the tape is finished playing.

  (e) use the menu option "file-> export to WAV" to save your record. The WAV file can be saved on your computer, converted to MP3 or burned on a CD. Get fancy with the Audacity audio editor features: you can cut, paste and add effects easily.

  You must save a clip of ten seconds at first, so that you can play it will immediately return in Audacity (green triangle button) and make sure your volume levels is good. If the audio recorded is too strong or too static, decrease the volume of your cassette player.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Software blackBerry mixture does not on windows 8.1 but it does not work on my Nexus 7 android tablet. Latest version of the software mix/link Z30 dated 13/07/2015

  Z30. Verizon. OS10.3 starting from 08/07/15. Latest mix / link to the software and drivers from 13/07/15. mix works on Asus Tablet android nexus 7, but not on dell alienware 14 "with windows 8.1. all work between the laptop and the phone: usb, wireless, transfer of files, backup, synchronization of calendar. BUT NOT MIX. help, please

  SOLVED. UNINSTALLED LINK/MIXTURE HANDSET SOFTWARE AND REINSTALLED. WORKS NOW.

• Impossible to pass to windows 8.1 because my processor does not support

  OK so I have windows installed on my dell OptiPlex 745 8.1, I uninstalled so I could go to a 64 bit OS. Now it won't let me not reinstall windows 8.1 and says "sorry you can not install the patch because it is not supported by your CPU" I have 8.1 installed before.

  Even if your computer's processor is capable of 64-bit, it does not support some Extensions in order to install 64-bit Windows 8.1.

  What are the EAP, NXand SSE2? - Windows help

  If it does not support these extensions, a BIOS upgrade may be required to activate the support.

  In some cases, you might be stuck with Windows 8.1 32-bit unfortunately.

• Recently upgraded Windows 2000 server to 2008 which does not support Netbeui. I am trying to install TCP/IP on the BACK box, but can't find a 16-bit version.

  I have an old DOS box running MS add-on workgroup 3.11. It worked Netbeui for years connecting to a W2K Server with no problems. We have recently updated our server to a new server Win 2008 who now does not support Netbeui. I try to install TCP/IP on the BACK box but have had no luck finding the 16-bit version of the tcp protocol. I can succesfully add battery of 32 bits, but the network card doesn't.
   
  Has anyone seen this problem before?
  original title: network BACK issues

  Hello, Steve Pollere,.

  The question you have posted here is related to Windows Server 2003 and would be better suited on the TechNet support forum. I suggest you post your question on the following link.

  http://social.technet.Microsoft.com/forums/en-us/categories/

• Windows 7 SP1 bits service is not running.

  I got my lenovo T400 a year (bought previously) and the gate opener 200 GB sea was starting to show signs of failure. I decided to replace the drive with an ssd 240 GB Kingston and I did a new install of windows 7 ultimate. and it worked fine for a few days. It downloads all the necessary drivers and updates. then manually install sp1 and ran wusuoffline he get windows to 532 speed windows installation updates. and after windows installed 30 or so other updates. and ran very well for two weeks. I turned it on and I did things and the basics of Microsoft Security said it could not complete its update if windows update service. I started the update of windows, and he had the red shield as one of my friends put it. and I clicked on search for updates. and he said: 'WINDOWS CANNOT CHECK THE UPDATES, because WHAT THE SERVICE IS NOT running. "YOU MAY NEED TO RESTART YOU COMPUTER. I reboot and run the troubleshooting of windows. and it gave me an error 0x8E5E0247, and that did not help. and I reset tool of windows updates. No deletion software distribution. Nope. and ran to the windows https://support.microsoft.com/en-us/kb/2730071 repair firm. and it still didn't work. so I whent in command prompt and I ran and received a system error 5 access denied. (and I would have ran windows 10 but my dose of video driver do not work in the ten windows environment).

  I need help this is way over my head.

  and this laptop is use for school so there is not another option for me up to what a few weeks or more

  If you can, make a backup of your system, or at least your data important (if there is) first.

  1 it seems that you have seen this article, but its worth a try again after the first reboot of your PC - https://support.microsoft.com/en-us/kb/2730071

  In accordance with the above article, if you look in the "services" window, is the "Background Intelligent Transfer Service" listed and running? If his try listed but not running, starting on the left by clicking to select and right click then click on START. It starts then? If it is not in the list, something's up, see below. NOTE: You may be in an ADMINISTRATOR account in order to start or stop a service.

  If his list but still does not start, then try - https://support.microsoft.com/en-us/kb/971058 and then see if you can run it.

  2 BITS if is not listed, then open MSE and see if you can update from the tab [UPDATE] force? If this fails, then go here and download the latest definition files for MSE to your PC and see if you can install manually. If you install them, now run a scan then full to see if it detects malicious software. Finally, download, install, update and run a scan complete with (free) Malwarebytes. Keep it free, no need to start testing. This analysis found a malware?

  If each scan detects and removes malicious software, then repeat the '2730071' and then '971058' above.

  3 if BIT is missing from the list of services, and the above do not restore, then check out http://www.winhelponline.com/blog/misc-registry-fixes-for-windows-10-7-8-xp-vista/

  Number 14.

• 0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  0x802d007 WinUpdate and BIT error does not work - nothing is fixing.

  Hello

  (1) what is the exact error code that you get?

  (2) service pack you have installed for XP?

  Method 1: Verify that the services are started
  Make sure that BITS and the automatic updates service are started. To do this, follow these steps:1.Click Start, click Run, type services.msc, and then click OK.
  2. in the list of services, click on automatic updates, and then click Properties.
  3. in the startup type list, click Automatic, and then click on apply.
  4. If the service status is stopped, click Start, and then click OK.
  5.right - click Background Intelligent Transfer Service, and then click Properties.
  6. in the startup type list, click Manual, and then click on apply.
  7. If the service status is stopped, click Start, and then click OK.
  Method 2: You receive an error message "Windows Update has encountered an error and cannot display the requested page" when you try to install an update

  http://support.Microsoft.com/kb/883614

  Method 3: You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or

  http://support.Microsoft.com/kb/943144
  
  For reference:
  How to troubleshoot a service that crashes in Windows XP
  http://support.Microsoft.com/kb/934650
  How to resolve problems connecting to Windows Update or Microsoft Update
  http://support.Microsoft.com/kb/818018
  Method 4: How to reset Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/)
   
  Note: You may need the XP disc for some functions in the steps above.
  I hope this helps!

• When you try to watch netflix it says 64 bit does not support silverlight

  Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!

  Have windows vista version, had netflixs and looked just fine. Something happened to the p.c., now when I go to look at, it says that 64 bit version does not support soft micro silver light. Not true! We need to help, please!

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find.  Reboot when necessary.  (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Uninstall all Plugins Internet

  Make a note of what you uninstall so after getting their all uninstalled, you can reboot and install again.  Be sure to get Adobe Flash Player (all versions), Microsoft SilverLight, Apple Quicktime/iTunes, RealPlayer/RealAternative, Adobe Air, Adobe Shockwave Player, etc..

  -After a reboot - visit their web pages, and then install the latest versions.

  Reset.

  Try again.

• LabVIEW 2013 64 bit does not support the 'toolboxes connection database?

  Hello

  I have download the labview 2013 64 bit & registed with success

  But encount a problem when I try to install "2013DCT"(database connectivity toolkits)

  Don't LV2013 64 bit does not support this toolkit?

  If Yes, where can I find the boxes to tools for 64-bit?

  You can install the version 32 bits in a relavent LV and copy the installation.
  /Y

• Firefox off telling me to upgrade to the new version of the flash plugin. I can't upgrade to the latest Adobe flash player 11, because it does not support Windows Vista 64-bit. So now what am I supposed to do?

  I have Windows Vista 64-bit. I can not play online games on Pogo. I have already contacted Pogo & they have update me of flash player. Firefox disabled by the Flash plugin. I can't update Adobe flash player because it does not support 64-bit.

  See:

  • http://kb2.Adobe.com/CPS/000/6b3af6c9.html

• Two Windows 7 64 bit updates do not. (KB977074) (KB976972)

  Two Windows 7 64 bit updates do not.

  Update for Windows 7 for x 64-based systems (KB977074)

  Update for Windows 7 for x 64-based systems (KB976972)

  Error details: code A 80071, 90

  It's the third day, they fail to install.

  OS is Windows 7 64 bit

  Processor: Intel Core 2 Quad CPU 2 .40GHz

  Installed memory: 4.00 GB

  How can this be repaired?

  Hello

  Copy the file "C:\Windows\Logs\CBS\CBS.log" (otherwise you can not open it) in your documents folder and open it with Notepad. Now I get errors. Errors that you see?

  André "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

  It is correct. I found the answer here http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6ee6ede7-7f6a-47dc-9562-acd08615532b
  I had to install updates one at a time.

• I am trying to download internet explorer 9 for windows xp 32-bit, and it is said that he does not support what I have... Help please?

  try to upgrade to IE 9 and I have windows xp, it does not support it... help please, says

  If I switch to IE 9 then I need to upgrade to windows 7... and it is probably not a free update for 7

  most likely, you will need to buy win7, before moving on to ie9...

  How much memmory your pc in there?

  I used a dell, Windows XP 32-bit, 4 GB memmory desktop pc, it works fine.

  but, like you, when looking at upgradeing to win7 and because everything today is 64 bits and manufacturers is phaseing on 32-bit almost everything. I chose to tighten teeth to talk and go for win 7 64 bit and a pc with a motherbourd and a chipset that is not obsolete modern day after tomorrow.