MS-DOS 16-bit subsystem. A device driver virtual installable failed to initialize Dll. choose 'close' to complete the application.

Similar Questions

• MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  I when even run some dos applications, which allows to work ok under XP mode full-screen, but when you use Vista or Windows 7. I can only rum these applications in a window.
  The error message is

  MS-DOS 16-bit subsystem. The system does not support the mode full-screen.

  Please is anyway I could run in fullscreen... I don't want to use a virtual machine.

  Any advice would be greatly appreciated

  Of Ernest24

  http://www.dosbox.com/

  You might be interested in reading about DosBox.

  See you soon. Mick Murphy - Microsoft partner

• Microsoft ISATAP adapter #28 (device driver software installation problems)

  Hi all:

  Just started getting the following error when I start first in regard to Microsoft ISATAP adapter #28:

  Device driver software was not successfully installed

  Please consult the manufacturer of your device to help get this device installed.

  I'm totally familiar with this device and as a result, I'm not sure what relevance with regard to my OS.  What I need to download and install a special driver manually, or should I just ignore the error message above?  Care of my system:

  CPU:  Intel Core i7 - 4770 K CPU @ 3.50 GHz

  GPU:  EVGA GeForce GTX 770 (last WHQL Logo'd driver installed)

  RAM:  Corsair Vengeance DDR3 1866 MHz (running at 1600 MHz) DRAM Pro

  OS:  Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_ldr.160408 - 2045)

  Any help would be greatly appreciated.  Thanks in advance!

  Hello

  Peripheral Microsoft ISATAP Inter Site Automatic Tunneling Address Protocol is used to help the transition to an IPv6 infrastructure companies. T he card ISATAP encapsulates IPv6 packets using an IPv4 header. This feature allows the customer to carry IPv6 traffic over an IPv4 infrastructure. This approach allows organizations to migrate slowly to an IPv6 infrastructure without having to spend too much time and financial resources to convert the new infrastructure.

  This means that the Microsoft ISATAP device driver is an update which is specifically designed to connect to the network. This driver is not a requirement for your operating system. It's an extra update for a better network functionality. If your internet connection works fine, then you can ignore this driver. Otherwise, follow the solution below to solve this problem.

  Here are the steps you can try:

  1. follow the steps on this link to update the driver: update a hardware driver that is not working properly.

  2. run the troubleshooting of autopilot: hardware devices do not work or are not detected in Windows.

  3 try to uninstall and reinstall the driver.

  To uninstall:

  1. Click Startand then click Control Panel.
  2. Click hardware and sound.
  3. Click on Device Manager.
  4. Double-click the type of device you want to uninstall.
  5. Right-click on the desired specific device, and then click Uninstall. You can also double-click on the device and then on the driver tab, click Uninstall.
  6. Click OK to complete the uninstall. (Restart your computer so that the changes take effect).

  To reinstall:

  1. Open Windows Update by clicking the Start button. In the search box, type Update, and then in the list of results, click Windows Update.
  2. In the left pane, click check for updates. If there are any available updates, click the links to see more information about each update. Windows Update tells you if an update is important, recommended, or optional. Each type of update might include drivers.
  3. On the Select the updates you want to install page, look for updates for your hardware devices, select the check box for each driver you want to install and then click OK. There could be no available driver updates.
  4. On the Windows Update page, click install updates. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation. Windows Update will tell you if the updates have been installed correctly.

  Let us know how it goes.

  Thank you.

• need Ethernet controller device driver after installation of windows 7 (32-bit) on an a1640n

  I did a new install of Windows 7 (32 bit) on my desktop HP Pavilion Media Center a1640n and need to find the device driver for the ethernet controller.  Device Manager, it is generically known as "ethernet controller" - there is no precision manufacturer so I can't go to the site to find.  Device Manager, it seems that the network connection works correctly (Intel 82562v 10/100).  I guess that's probably an Intel processor, but which?  Any instructions or advice find download ethernet controller device driver would be greatly appreciated.

  Thank you

  Jennifer

  Hello:

  It's a card ethernet (antique) to heritage for which there is no W7 drivers.

  My advice would be to remove it and install a compatible ethernet card from windows 7 in its place.

  Allows you to update and get a 10/100/1000 NIC

  Sn54ls164j AN983 10/100 PCI card is not better than the integrated Intel NETWORK interface in your PC.

  Or use the Intel ethernet port if it works.

• After loading the driver, Miss me a lot of dll which is present on the drive

  I'm trying to reinstall written in-house (but there is a long time in a distant country by a perhaps mythical programmer) software on a XP system, which is supposed to allow a PCI-6602 to communicate with an SCB-68. Pilots (DAQmx for windows v. 8.5) seem to load fine, but when I run the application, she moaned about missing a whole slew of dll that is not present in c. 8.5. They are present in v. 6.9.3, however. I tried to uninstall 8.5 and install 6.9.3 - and the application always moaned about missing DLLs! Although they are present on the disk, they do not have installed when the DAQMX software installs.

  I can't just copy the files in question since the installation disc, because there are many of them and most, if not all of them exist in 2 or three different versions each: for example, nidaq32.dll.SOME_RANDOM_CODE, nidq32.dll.ANOTHER_RANDOM_CODE.

  I guess I * could * copy, of course, but the number of possible combinations is formidable, and I think that there is a smarter way to understand this.

  Hi Sue,

  nidaq32.dll is associated with the traditional OR-DAQ driver, so I wonder if the program could be written before the introduction of DAQmx.  What version of LabVIEW was written with your program?  In addition, you can check that you need NEITHER-DQA traditional rather than the DAQmx for your program.  If you have your CD of NOR-DAQ, install the traditional driver with all the support.  You can also download the latest version of the driver NOR-DAQ traditional 7.4.4 to ni.com in this place:http://joule.ni.com/nidu/cds/view/p/id/570/lang/en.

  Good luck!

  AnitaB

  Technical sales engineer

  National Instruments

• Error during device driver software installation blue screen

  Original title: 'Install the driver software for device' => BSOD

  'Install the driver software for device' => BSOD (WD My Book World Edition II network storage)

  Hello

  I have WD My Book World edition II network storage and it worked fine with my Vista Home Premium (64 bit) beyond six months, I got it.

  Months ago I have access from explorers file search 'network '.  During this point Vista asked me something like "want to install you the drivers for this device? I pressed No. because previously there has been no need to install anything. After that Vista has asked same question whenever I start my computer. Annoyed by the same query I finally pressed Yes. Then it started to install drivers and I had blue screen.

  Now whenever I start my computer (if my storage network is turned on) vista begins to install the drivers and accidents. End result is that I can't use my network storage.

  No idea how to solve this problem (without formatting and reinstalling vista)?

  Hello

  the cause of the accident is the driver:

  Image path: \SystemRoot\system32\DRIVERS\mrdd.sys
  Image name: mrdd.sys
  Timestamp: Wed Nov 12 07:44:48 2008

  From what I see the pilot belongs to your driver SATA of Marvel . As you can see that the driver is a bit too old. Update the driver, please.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Device Driver Virtual Miniport Adapter #2 not connected how can be solved

  PC for Microsoft virtual port driver mini adapter # "2no" connected how to fix

  Hello

  1. who is the operating system installed on your system?

  Method 1:

  Follow the link below, open the hardware and devices troubleshooter. Check if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  Uninstall and reinstall the drivers for Microsoft Virtual WiFi Miniport Adapter

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if it helps.

• Windows 7 cannot install from the cd/dvd-rw LG GH22NS90 player. "the CD/DVD device driver is missing" message is presented. How can I recognize the device?

  Separated from this thread.

  I have the same problem, my Windows email me the error code (19) of register incomplete or...
  I have download the drivers from the web LG.com and he send me, devide cant find.

  I try, I try and without operation = s help to respect? THX

  Hello Hendry,

  Thanks for posting your query in Microsoft Community.

  I understand that you have any questions using the CD/DVD drive in Windows 7 computer. We will certainly help you with the same.

  I would like to know some more information on this issue to help you better.

  1. Are you able to access the other CD/DVD drive in Windows?
  2. You try to install the drivers for any device?
  3. When say "Windows send me error code (19)", you get this error message in Device Manager?

  In the meantime, please follow the below suggestion to solve the problem.

  The error code 19 occurs when data in the registry for the device and its driver were damaged.

  For more information on this error, follow the link below:

  Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  () Also applies to Windows 7 as well ()

  http://TechNet.Microsoft.com/en-us/library/cc772156 (v = WS.10) .aspx

  Additional information:

  Your CD-ROM or DVD drive is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about the back upward and restore the registriesry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Large Format HP Officejet 7500 a - cannot install driver and installation failed.

  Error messages "Call to driverpackageInstall returned error 5"C:\program file\HP\HP officejet 7500 E910\Driver Store\pipeline\hpvp log.inf"package: a caller of driverpackageisntall must be a member of the Administrators group to install a driver package.» (My Windows 7 Ultimate 64 bit operating system). Thank you very much for the help.

  Welcome to the ilosade forums

  I read your message on the error that you experience when you try to install your Officejet 7500 printer. I will certainly do my best to help you with this!

  I suggest first trying the steps described in this guide. Please do not consider the title, I have reviewed the steps and suggest try you: Windows: during the Installation of network software, a ' Installation error 2081883401: failed to uninstall the device with serial number:..' Error Message on the computer

  If the steps above do not work, you can try to create a new user account with administrative privileges on your computer and then download and run the installation again to see if it will work.

  Create a user account

  Driver and HP Officejet Full Feature software

  Please keep me updated on your results!

  Have a great Tuesday

• Photoshop Elements 14, 64-bit download, Installer failed to initialize the Windows 10, 64-bit PC

  Bought PS elements 14 at Adobe that download and tried to install 3 times and each time

  came to a mistake (no code #) setup initialization failed.

  Someone at - he found a solution to this?

  Therefore, the final word is apparently 14 PS elements cannot install on Windows 10, 64-bit.

  So I go back to the use of 13 PS elements on this platform - which is all I need to anyway - and

  Ask for a refund, which was approved and is ongoing.

  Thank you all for your comments!

• Parts of my storage on my hard drive, bootcamp installation failed.

  Earlier today, I tried to install Windows on my Macbook Pro retina 10 (end of 2012) (El Capitan), and after restarting my computer to go to the page windows so I could install it, I found that there is no 'BOOTCAMP' partition for me to choose to install the program windows on. My computer has the storage capacity of 128 GB so I used 32GB for the Windows partition and kept 88GB for my side of the Mac OS. When I logged in my mac os user, I found that I had 88 GB of storage. I went into disk utility, and there is no BOOTCAMP partition. It appears my mac user with its 88 GB of storage. Its like the other 32 GB just gone. I tried everything I could find online, but it was no help. If you have a solution on how to recover my storage space that would very well and also if you had a fix for what I was doing wrong when I tried to install windows 10, would be great also.

  Can you post the output of the following Terminal commands?

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order.

• "driver (wdm) init fail (0 x 137) error" msg when upgrading the BIOS, my laptop is with win 7 64 4743 G.

  Any solution to this problem?

  If it was my machine on which I relied, I returned as faulty caddy and request a new or try another brand. I personally would not Flash the bios unless my machine had * other issues specifically addressed * by the update of the firmware.

  Jack E/NJ

• Continuous Windows\system32\wuauclt.exe pop up __16 bit subsystem MS-DOS error message: C:\Windows\system32\wuauclt.exe__The NTVDM CPU has encountered an invalid statement.

  have a couple of pop ups on my computer that appear every15 seconds or more. It is just an empty box with the title "Windows\system32\wuauclt.exe". Nothing in it. The other is a "16 bit MS-DOS subsystem" box with the following error message: "C:\Windows\system32\wuauclt.exe NTVDM CPU has met an invalid statement. CS:0000 IP:0077 OP:f0 37 05 02 0e choose 'Close' to end the application.

  When I choose 'close' or 'ignore' the windows go away but systematically re - appear about 15 seconds later. Now, I am just pass the windows out of the way and can use my computer like that.

  I ran scans on my computer but nothing was found.

  Since this problem started, my computer automated updates have not been installed. I understand that the above file has to do with automated updates. My Windows Update starts either in the Panel.

  I also had problems downloading the file exe running for installation on my computer since...

  Microsoft support directed me to this forum for help. Can anyone help?

  Hi Hibernatus,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. what happens when you try to start Windows update? You receive an error message?

  Method 1

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Method 2

  The question Windows Update make sure that services associated with the update of Windows running on the computer.

  You must be logged on as administrator to perform these steps.

  (a) open administrative tools by clicking the Start button, click Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  (b) double click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (c) in the Services window, double-click in the Background Intelligent Transfer Service.

  (d) under the tab general , under Startup type, click Manual, and then click apply.

  (e) click on the general tab, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (f) in the Services window, double-click the Windows Update service.

  (g) under the tab general , next to Startup type, make sure that Automatic is selected.

  (h) next to Service status, check to see if the drive is listed. If this is not the case, click pie S, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (i) in the Services window, double-click Cryptographic service.

  (j) under the tab general , next to Startup type, make sure that Automatic is selected.

  (k) next toservice status, check if the drive is listed. If not, click Start, and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (l) to close the Services window and try again to install updates to Windows.

  Also see the Microsoft article below if you use the Windows XP operating system.

  "16-bit MS-DOS subsystem" error message when you install a program

  http://support.Microsoft.com/kb/314452

  Error message when you install or start an MS-DOS-based program or 16 - bit Windows based

  http://support.Microsoft.com/kb/324767

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• 64-bit to run 32-bit? for a device driver

  I have a usb bridge to run 32-bit on a device driver, how can I run 32-bit only for this program only.

  Would love to know the answer!

  Hi vincentmenzies,

  Device designed for 32-bit Windows drivers will not work on 64-bit Windows.

• Windows XP "Apple Mobile Device Driver not installed not" device need driver mobile HELP running XP service pack 3 using an iphone 4

  Problems with the iphone 4 who it says in itunes that "Apple Mobile Device Driver not found" and nothing happens when it is connected to the USB port on charge even not. Running Windows XP 32-bit with Service Pack 3. but think I deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers. Apple went through just fine and everything is OK it is a problem of PC and XP. Microsoft help put me on this site because need to know how to solve this problem I hope that somewhere there are mobile device drivers that work with the iphone? Site Internet de Microsft has 5 mobile device for Windows 7 drivers, but not for XP. Need help!

  Apple went through just fine and everything is OK it is a problem of PC and XP.

  Evasive classic.  It's always the problem of the other guy.

  And the classic response of some evil-educated person "technical support":

  Microsoft help put me on this site

  If the error message says 'Mobile Apple Device not found Driver' then it's an Apple problem, pure and simple.  The device driver mobile for the iPhone comes from Apple, not Microsoft.

  Do you remember what you were doing when you "deleted all the drivers mobile when I uninstalled my Blackberry and removed the current mobile device drivers?"

  Probably not... and you have not explained what has been included in "Apple went through everything."  It is time to start over by removing everything related to Apple and then put it back correctly.

  First, however, the fact that the iPhone does not load even when connected to a USB port is a bit worrying.  Works in everything else in this USB port (for example, a USB flash drive)?

  Have you tried all the USB ports on your computer?  Take a look in the Device Manager (start > run > devmgmt.msc > OK) and see if there are any icons showing warning.  If so, double-click on the entry and information "device status".

  Take a look at the event viewer (start > run > eventvwr > OK).  There is no need to go far.  Connect your iPhone, then look at the newspapers (System and Application) for since a few minutes see if there are any errors or warnings.  If so, double-click on it to get the event properties window, and then click the "Copy" icon (just below of the)

  Have you tried to recharge the iPhone using the adapter connected to Apple's USB cable?  Does it work?

  Have you tried to connect the iPhone to another computer?  With what results?

  Assuming that the hardware (iPhone, USB cable, and USB ports on your computer) is not working properly, see the following topics.

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.

  Warning: uninstall utility for cleaning Windows mentioned in the instructions below has been removed from Microsoft download servers because sometimes it seems more removed he was supposed to (I think that this phenomenon was linked to the bureau uninstalls).  You can still get utility Windows Installer Cleanup--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html here is a free alternative Revo Uninstaller. Before using these cleaning products, you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  Go to control panel > Add/Remove programs
  Remove these applications:
  1 Apple Software Update
  2. Apple Mobile Device Support
  3 Hello
  4 iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)
  5 iTunes
  6 QuickTime

  Open my computer > C: > Program Files
  Delete this files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  Download & install the Windows Installer Cleanup utility: [see note above regarding cleanup utility]
  http://support.Microsoft.com/kb/290301/
  Launch the utility: start > programs > Windows Installer Clean Up
  Select one of the applications mentioned above and click on remove

  Restart the computer
  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/