MS DTC console stopped working and was closed

How can I fix MSDTC Console stopped working and was closed? Error message #1067 trying to restart.

http://social.msdn.Microsoft.com/forums/en/windowstransactionsprogramming/thread/5ef6532e-Ca3a-4323-bad5-9c94ba606c2f

See if the information above helps you.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Can't print Photosmart C5280. Error "object GPCore COM has stopped working and was closed".

    I have problems printing my Photosmart C5280 All-in-one on my desktop of Windows Vista 32-bit. I felt for a few years and have only recently met this issue. A few months ago, I set up a home network so I could print from my Toshiba laptop. The printer is connected to the computer via a USB cable and the laptop is connected via a Bigpond Modem/Router which is connected to the desktop via an ethernet cable. More recently, I have also configured for my son to be able to print from his HP laptop. Initially, we were able to print from any computer. The two paltops are running Windows 7 64 bit. However, in recent weeks, we noticed that we were no longer able to print from a laptop, and a few days ago, I was unable to print from the office. When I try to print from the office, the print job seems to go to the print queue, but is then removed from the queue. I then get an error message

    "GPCore COM object has stopped working and was closed".


    This applies to all applications even the test print. I just went through the steps on the HP site, including downloading and execution of printing HP troubleshooting and doctor Scan and uninstall then reinstall the printer. I'm a bit of a novice at the side Computer Hardware and wonder if there is anyone out there who has had a similar problem and found a solution. Any thoughts would be appreciated.

    Hello MikeF48,

    Sometimes to do a simple uninstallation / reinstallation is not do the trick, and we try to remove all the software from the computer completely. Most of the drivers available at HP have a scrubber utility that removes all traces of the software on the computer and allows you to reinstall the software fresh. We should start there and see if that gets us running.

    I recommend you to do all this on the Vista machine. Once we have a working computer we can then pass from there to other laptops.

    Here are the instructions to use the tool of the scrubber. There are two sets of instructions, one for if you have installed the drivers from the HP website or if you have installed the drivers from the CD that came with your printer. Follow the instructions for your installation accordingly.

    Of the Original installation CD:
    1. Insert the CD in the drive and then cancel Setup
    2. open my computer and click right then on the CD from the drive and select open
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://get.Adobe.com/flashplayer/
    9 download drivers and full software features
    Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:
    1. type % temp % in the field of race
    2. Locate and open the folder starting with 7z (example: 7zS2356)
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.bat. If you have a computer not HP, run the L4uninstall.bat
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://get.Adobe.com/flashplayer/
    9 download drivers and full software features
    Software & Driver Downloads - HP Photosmart C5280 All-in-One Printer - Vista
    10. run the download to reinstall the printer

    After having uninstalled the software and did a reinstall of fees. Let me know if the problem is still the Outlander.

  • "Driver Installation module stopped working and was closed" error nvidia

    Today I installed the version of Vista Ultimate with SP1 (PTM51E - Bios 3.60)

    Since installing I can not any version of the nvidia drivers graphics card to install.

    "Driver Installation Module stopped working and was closed" is the error that happens every time.

    IM immensely frustrated by this

    Why you post twice?
    http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=114172#114172

    Recommended to follow only a single wire

  • Installer of Modules of Windows has stopped working and was closed

    Hello
    I have a laptop Toshiba Satellite (running Vista Home Premium) that I bought about two months ago.  When he tries to run updates, he routinely gets through a few and then up pops the message "Windows Modules Installer has stopped working and was closed."  I have already reinstalled Windows Updates and Microsoft Updates, nothing helps.  Recently, she was immobilized on the KB958623 update, so I tried to install that separately, but the same message popped up and it did not work.
    Help?
    Thank you!

    Greetings mollypopsicle,

    I see that we have always had problems with this update.  This leaves me with the question about the possibility of fi computer update auto is damaged during download.

    I would like to have you create a folder on your desktop.  Right-click on an empty spot on the desktop / new / file - name of the folder KB958623.

    If you have a download manager, please use it to download the KB958623 update from this Web site

    http://catalog.update.Microsoft.com/v7/site/search.aspx?q=958623%20

    Make sure you use the version of Windows Vista that applies to your system.

    Once the download is complete and before running the update

    1. Restart your system in safe mode with networking, as described in the above post from Brian.
    2. Once the system is booted in safe mode with network, run the update from the file that is downloaded on.
    3. If this does not properly complete, were there a pop-up Windows indicating that an error?  If so, what were these errors?
    4. Maybe it's that the error you receive is that this update does not apply to your system.  If so, this update can be hidden in your list of updates.

    Here is a link on how to hide the update

    http://windowshelp.Microsoft.com/Windows/en-us/help/5a319824-5cb5-493d-9151-9a97d0f565b61033.mspx#EZH

    Select only the I'm getting offered an update from Windows that I don't want.

    However, before you do, check which version of Windows Vista is ran - home edition, Premium, Ultimate, it is 32-bit or 64-bit edition.  Also, if there is an error of execution of this manual update mode safe mode with networking, include this information in the forum.

    Thank you and continue to keep us informed of the State of this update.

    Best regards

    Debbie Microsoft Support Engineer answers visit our Forum of Microsoft answers Feedback and let us know what you think.

  • Error message: Message "Microsoft Windows Search index has stopped working and was closed" and TotalRecipeSearch Installer Plugin stub erros in Kaspersky.

    Original title: TotalRecipeSearch Installer stub Plugin

    Hello world

    I have problems with the startup of Microsoft Windows.  I get the Message below "Microsoft Windows Search Indexer stopped working and was closed"  a problem caused the application to stop functioning properly.  Windows will warn me if a solution is available.

    I also have a "TotalRecipeSearch Installer Plugin stub" and "My Web Search Bar for Internet Explorer, client e-mail and messanger clients". in my Kaspersky Anti Virus.  When I press fix it does not.

    Can someone help me?

    Thank you

    Irene

    Hello Irene,.

    Thanks for posting in the Microsoft Community.

    Since you are facing multiple problems, it would be useful if you can answer this question to help you further.

    1 Windows operating system you are using?

    2. have you done any recent software and hardware changes to the system?

    3. what Fixit try you?

    On the issue of Windows search, try the following steps:

    If you use Windows 7, and then try the troubleshooter, another run the Fixit of Windows search.

    Method 1:

    You try to run the search and indexing of convenience store and check if this solves the problem.

    Open the troubleshooter for search and indexing

    Windows search Fixit: difficulty Windows Desktop Search when it crashes or no results

    For more information, see the article:

    Improve Windows searches using the index: frequently asked questions

    Searching in Windows: frequently asked questions

    Method 2: Rebuild the search Index.

    a. open indexing and the Options to search by clicking the Start button, click Control Panel, click on Indexing Options.

    b. click Advanced Options, click the index settings tab and then click rebuild. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

    About the issue with Kaspersky, try the following steps:

    You can try to uninstall and reinstall Kaspersky and check if it helps:

    Uninstall or change a program

    Install a program

    Note: Make sure you have the software of security or disk configuration files to install this later.

    If you need further assistance, please answer and we will be happy to help you.

  • Windows Update, error: "Windows Modules Installer has stopped working and was closed".

    Whenever I run windows update, and try to install an update for Vista, I get the error message"

    "Windows Modules Installer has stopped working and was closed"

    . This has happened for quite awhile and I tried many suggestions on the web. If you do an internet search, you will see this seems to be a fairly common problem, but I can't find any official solution of Microsoft. I am afraid that I do not receive the latest updates and security patches so would like to help with this question.

    Thank you

    Luke

    Hi guys

    I had installed up-to-date antivirus software and my problem seems to start after an update from Microsoft. Do a search on the web and you will see similar stories. I spent so much time trying to solve this I think it's better just to do a re-install. Certainly not the resolution I had hoped, but appreciate this type of questions are almost impossible to solve the problems through intermittent mail such messages.

    Thank you

    Luke

  • manages scheduled tasks has stopped working and was closed

    Lately I get this error message often when I start using my Vista PC (Vista Business SP2) in the morning: "manages scheduled tasks has stopped working and was closed".

    And this morning the automatic update of Windows Defender definitions also could not install (so I would be dnld and installed).  Set to automatic update referred to 'unknown error' (8 and 57, I think).

    FYI, sfc/scannow reported no integrity violoations with system files.  I also reconfigured my PC there is to make sure that it is clean, fresh and perfectly up-to-date before reinstalling all my apps, and it's been updated for about 2 months then.

    How this application problem "manages scheduled tasks" can be fixed?  If you don't know, where can I get an answer?  Neither Google nor Bing seem to show any reference to the exact phrase "" manages scheduled tasks has stopped working stopped working '. "

    Craig in New Jersey

    Update 7/22: I'm starting to suspect a problem of interactions between turn off Vista and [printer] HP Digital Imaging Monitor.  I tried to disable it via msconfig, a couple of days and have not seen the mistakes regularly ever since, but the jury is still pending for another week or two.   I'll report after awhile.

    It is too early to point a finger because we know that all of them have well worked normally in the past and they seem equally at risk of corruption.  For example, I have no these errors when you use the same software HP on my Win7 PC and I don't have these errors for a few months after that the reconstruction of my Vista laptop, so I'm suspecting some piece of software has become corrupted (something in Vista), or something the tracking software program, some windows or component or registry setting software execution to one who relies on the HP printer.

    Craig in New Jersey

    Update 7/27 edit: Since disabling component HP Digital Imaging Monitor (hpqtra08.exe) drivers HP printer/scanner more than a week ago, I have not seen error messages 'has stopped working and was closed"breed, and Windows Update seems to operate normally.

  • Message "Microsoft (C) Register Server has stopped working and was closed" appears

    When I start up I get the message "Microsoft (C) Register Server has stopped working and was closed".

    Here, an article which offers a solution to this problem that seems easy to implmenent and is worth a visit: .

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Microsoft error message "R003. EXE has stopped working and was closed ".

    Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

    Discussions were merged.

    Deleted duplicate.

    I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

    http://malwaretips.com/blogs/default-tab-search-bar-removal/

  • AFN Updater has stopped working and was closed

    Original title:

    AFN Updater

    I get the following:

    AFN Updater has stopped working and was closed

    A problem with the application to stop working properly, Windows will notify you if a solution is available.

    The message stays all the time.  It has something to do with a phone, what can I say, but do not know how to get rid of it.

    Any suggestions?

    C

    Hello

    Search in the two programs and features and uninstall or look for a boot entry.

    "How to use MSCONFIG in Windows Vista"

    http://www.netsquirrel.com/Msconfig/msconfig_vista.html

    You can also use this free program to do, too:

    "Autoruns for Windows V11.32"

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

    See you soon.

  • Windows Audio device Graph Isolation has stopped working and was closed.

    I am running Windows Vista Ultimate 32 bit. My volume on the system tray icon has an 'X' on it, and when I mouse over it it says "audio service does not work." When I right click on it, the open Volume mixer is grayed out and unclickable. When I get my audio settings / sounds an error pops up saying "Windows audio service is impossible. You want to allow it? "I click on Yes and then he said: 'Windows Audio Graph insulation has stopped working and was closed. »

    the error report is:

    Signature of the problem «»
    Problem event name: APPCRASH
    Application name: AUDIODG. EXE
    Application version: 6.0.6001.18000
    Application timestamp: 47919284
    Fault Module name: AUDIODG. EXE
    Fault Module Version: 6.0.6001.18000
    Timestamp of Module error: 47919284
    Exception code: c0000005
    Exception Offset: c 000070 0
    OS version: 6.0.6001.2.1.0.256.6
    Locale ID: 1033
    Information additional 1:3502
    More information 2: a465924573e02e7dbf28b31e7ea12c28
    Additional information 3: a4b
    Additional information 4: 91409072175cd5a219bdca7388005249

    Additional information about the problem
    Bucket ID: 932674242 "

    This is on a DELL XPS M1710
    I uninstalled the driver and reinstalled, uninstalled the device itself and not reinstalled, no change.

    No software installation seemed promt it.

    What are my options?

    deafinhum,
    If you run the utility from the Vista DVD System File Checker, it will extract the files it needs to turn off the DVD to replace those damaged.  If this does not work, you will need to do a repair of your Vista installation.

    Here is an article to help you with the repair process.  Please let us know if you need more assistance.

    http://support.Microsoft.com/kb/936212

    Thank you
    Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Desktop Window Manager has stopped working and was closed

    One of our machines (HP Pavilion dv7 Notebook PC running Windows Vista x 64) will receive the error "Desktop Window Manager has stopped working and was closed" with lots of close error. He reappears (as well as all windows flasher to non-aero, then back to aero) in a few minutes, spends about 5 times per hour.

    I did some research on this and have already taken the following measures without a bit of luck:

    1 run the command chkdsk / SFC scan - nothing found via chkdsk, SFC found some issues fixed, and some, it did not set. Them that it solves not all related to Windows Sidebar, which I do not / does not start.

    2. put updated drivers for ATI Radeon 3200HD - this had a lot of new questions. Installing caused newer drivers ATI catalyst to no longer work with errors during installation and popup errors at startup. After trying several solutions workaround to try to get installed it, I ended up coming back to the driver that came with the laptop, that are properly installed and working without error. I am skeptical of update of this stable driver as a solution to the dwm.exe error.

    3. this problem just started yesterday, that occur with not a lot of changes. Other than updates of windows (I think that .NET framework and a few other updates installed), I replaced NOD32 antivirus with Bitdefender antivirus. The system was stable with bitdefender for about 2 weeks, so I'm not convinced that this program is causing the error.

    4. the event viewer shows the following:

    Failing application Dwm.exe, version 6.0.6002.18005, time stamp 0x49e02696, failed module ntdll.dll, version 6.0.6002.18881, time stamp 0x51da3d16, exception code 0 x 80000003, offset 0x00000000000461f0, process id 0 x 124 error, start the application time 0x01cea0365a457adc.

    Offset, process id and start on time all vary, but there are a lot of these application errors in the viewer all screaming Dwm.exe like the failing application.

    What should be my next course of action?

    You do not receive an error but a caveat. NTStatus results (the set of codes execption used by ntdll - the failed module) begin to 0 for no error, 4 for information (you should never see this), 8 for putting guard and C for error.

    It's your specific error.

    //
    MessageId: STATUS_BREAKPOINT
    //
    MessageText:
    //
    EXCEPTION {}
    Breakpoint
    A breakpoint has been reached.
    //
    #define STATUS_BREAKPOINT ((NTSTATUS) 0x80000003L) / / winnt

    Problem is, you shouldn't have breakpoints. Breakpoints are set by debuggers and stop the execution of the program to the State of the program can be examined. There should be no breakpoints in a retail system. More breakpoints are inserted into memory during execution of the program in a debugger. They tend not to do in the actual file.

    So here are two assumptions, either you have no exit code, IE test code (driver?). Or you have a running program that behaves like a debugger (which is suspect).

    Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

    Clean boot

    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

     
    Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

    Tip clean boot

    If the above does not help.

    Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

    Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

    Reset. If this resolves your wake problem half of the items until you find the one that.

    Safe mode

    If the above does not help.

    Click Start - all programs - Accessories - run and type
     
    msconfig
    
     
    Go to the Startup tab, and then click Start. Reset. Come back here and uncheck the box secure start to return to normal mode.

  • Microsoft Windows Search Indexer stopped working and was closed

    I get this pop-up error message "Microsoft Windows Search Indexer stopped working and was closed" and I can't get rid of it.  I tried to go to control panel, Indexing Options and Reindexing, but that does not solve the problem.  I always get this error message.  Any help would be appreciated.

    Thank you

    DooDoiDaddy

    My first try at a fix would be SFC, then re index again. The error control player would be next.

    1) right-click the icon of the drive in r explores(the application of the computer at startup)

    2) click on properties of

    3) click on the Tools tab

    (4) see error checking

    The System File Checker tool

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. click Startand type cmd in the box start the search .

    2 right-click cmd in the programs list and then click run as administrator.

    3. If you are prompted for an administrator password or a confirmation, type your password or click continue

    4. at the command prompt, type the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.

    Mark L. Ferguson MS - MVP

  • A pop up window telling me:-mobile device service has stopped working and was closed

    original title: mobiledeviceservice has stopped working and was closed

    A pop up window telling me: -.

    Microsoft Windows

    MobileDeviceService has stopped working and was closed

    A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

    The only opposition is to close. After closing, it ceases to appear after a few seconds. So, how to solve this problem?

    Hi Nati,

    1. when exactly you receive this error message?

    2. What is the full error message you get?

    3. you remember changes to the computer before the show?

    You can try to perform a clean boot and check.

    A clean boot to check if startup item or services to third-party application is causing this issue.

    You can read the following article to put the computer in a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    After the troubleshooting steps, please refer to clean the boot link to put the computer to normal startup mode.

  • Errors NT Service stopped working and was closed"and Windows Explorer has stopped working"

    Original title: NT service

    "NT service stopped working and was closed" appears on desktop screen after signing in. In addition, "Windows Explorer has stopped working" appears when trying to access to the "view network status and tasks" or "set up file sharing" in the control panel. However, I am able to access Internet Explorer without problem. What is the problem?

    Hello

    1. you hear that you receive the error at startup after you have signed in to the user account?

    2 have you made any changes to the computer before the show?

    NT Service stopped working and was closed because:

    Method 1: Try to start the Services.msc services and see if that helps, manually.

    (a) click Start, type services.msc and press enter

    (b) search for the following services

    (c) Net.Tcp listner adapter

    (d) the Net.Tcp port sharing

    (e) make sure the status of services started and startup type is automatic.

    (f) click on apply and Ok.

    Method 2: SFC scanner.

    Analysis (sfc) System File Checker will replace the missing or corrupted system files on your computer.

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7 http://support.microsoft.com/kb/929833

    Explorer Windows has stopped working the issue:

    See the following article:

    Important notes:

    ·         You can exclude scan SFC in the following article:

     

    ·         When you have finished diagnostic using the clean boot, follow step 7 article to start on normal startup.

    ·         The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

    ·         Before Inplace upgrade, be sure to back up data.

    Error: Windows Explorer has stopped working http://support.microsoft.com/kb/2694911

Maybe you are looking for