MS Office report Express VI and table problem

Hi all

I have a strange problem with MS Office report VI, which is included with the report generation tool. I created an Excel template that I linked, according to the preference "Custom template for Excel" and all the named ranges. However, two of the named ranges that I entered are 1 d arrays of doubles. Now the problem:

When I entered the berries to their specific name range (it's only 6 values), instead of simply enter the values in the table in the cells he entries like this:

A value of 0

1 value

2 the value

...

6 value

He pushes the 'value' to the column next to the beach of name because of 0-6.

He does it with two tables so it screws to the top of all formulas. Anyone know how to remove the 0-6 and simply enter the values?

Thank you all

The Express VI are easy and convenient, but some costs. Since the Express VI can also accept a waveform entry, you have to accept that it will add a channel name.

With the tool report generation (who are also its limits), it's easy to add only the data you want:

Ben64

Tags: NI Software

Similar Questions

  • Save the customized using MS Office report Express VI filename

    When my program creates a report, I want to save it as a serial number, defined in the report.  I want to use MS Office report Express VI to do this, but unfortunately it only allows you to save the file name as time and/or incremental number.

    Hi jliu317,

    In the meantime that warn you the moderator to move your thread, here is my solution. (Correct me if I'm wrong)

    In MS Office Report, there is a block diagram entry named path to save the report. That is where you can save your report in Word (.doc) or Excel (.xls) under the name of file custom as serial number, as shown below.

    http://zone.NI.com/reference/en-XX/help/370274G-01/lvoffice/ms_office_report/

    I hope this helps.

    EE - Lim-

  • text and table in excel is not by adding using the generation of reports

    I want the file to write to the attached format. pls help, I m trying for the last 3 days...

    Thanks in advance.

    I did purchase table to write to report.vi. but not able to add it to other excel files.

    Thanks ben,

    your program is working well for version 11. I'm working on version 8. After much trying, I found that, in this document, add table adds in excel unlike in version 11 to give the coordinates (microsoft office settings) to locate the table.

    Thank you for your response.

    dg7318

  • Updates to MS Office and other problems.

    I am running MS Vista with SP2 and when I try to use Office 2003, office 2007 tent install, the computer came up with an addition of the trial for office 2007 I have uninstalled 2007, I have office 2003 is installed and when I try to update I get a response to day 2007. And whenever I go to MS Update it gives me updates for office 2007. It gets very frustrating to say the least, I feel if MS is endearing to cram Access2007 down in my mind, they must give it to me free of charge or leave the _! With all the problems of the MS OS cause I am seriously thinking about changing to MAC, another advantage with Mac is that I won't have to worry about viruses. I am an advanced user and I never had so much trouble one operating system that I have with Windows, even Linux responds better, because all the money than Windows costs it should be perfect now!

    If the Office Compatibility Pack (2007) and/or Word Viewer 2007 or Excel 2007 PowerPoint Viewer 2007 Viewer is installed, Microsoft Update offers your computer "Office 2007 updates." ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • mail electronic outlook express pop - up-"outlook express has encountered a problem and the need to close.

    I am running XP.

    When I select an email or try to create an e-mail, I get the Outlook Express "pop up" where it is said

    "outlook express has encountered a problem and need to close... Sorry ".  Asks me if I want to send a message
    for Microsoft, when I click on the option, the screen freezes and I have to type the keys del Alt, control, in order to free
    and end of the task.

    You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

    Note: Do not use the main word in the name of the new identity.

  • Using OBIEE 11 G with display of the narrative report and table

    Hello

    I have a report designed as the below, I used 'narrative view' for details of the customer and "table view" for the details of the order. In the narrative view, I can say = 1 line and it picks up the first customer detail record, but the details of the order shows all lines. How can I control it for details of the command displays only the detail of the associated client record. Also how can I go to the second record and so forth. Help, please. If this is not possible and there is no substitutes, let me know. Thanks for your time and your help.

    Customer number:
    Customer name:
    Customer address:

    Details of the order:
    Line number | Order No. | Order description. Status of orders

    Hmm, try this:

    (1) create a PivotTable.

    (2) put the customer number, customer name and address of the customer in the area of the Sections. Make sure each column begins "in a new line.

    (3) in the lines section, put the line number, order number, order Description and status of the orders. Put your measurement in the section measures.

    (4) in the properties of a pivot table, he paused after each change of customer number.

    Then break your PDF files on a new page for each customer. The details of each customer's order must be only for each customer.

  • HP Office Pro 8500 first and Mac OS Lion. Software problem

    I have a HP Office Pro 8500 first and recently, I upgraded my Mac OS Lion. Now the printer is not recognized by my Mac OS Lion. I understand there are required HP upgrade. Please notify.

    We will restore the printing system

    -Sys Prefs, print Fa
    -Right (control) click inside the box that lists your printers and select Reset Printing System
    WARNING - This will remove ALL your printers
    -Select the sign + to add again. Search for the printer, select it, and wait for the theAd element button becomes available. Click it

  • Strange behavior with Report Generation Toolkit. Table does not table.

    We use a Word 2003 (.doc) document as a template for a summary of the report.  It works fine on the development PC.  It fills the fields in the document and fills the chart correctly, as shown in the picture below.

    However, he cannot even on another station.  Although the 2D table is identical and so is the software to investigate the matter, the table does not get filled correctly.  I studied using Word 2010 (.docx) as a model, with the same results.

    I was not able to understand what is different between stations 2 and why it does not work on the 2nd station.  I googled similar questions on the Web site of NOR and was only this article in the knowledge base concerning the new lines in the cell, which is not my case.

    That's what I have on the 2nd machine:

    The table that is sent to the table contains the appropriate data :

    I just found out this is a known bug, which obviously has not yet been resolved (finally... at least until LV2012SP1).

    See these threads:

    http://forums.NI.com/T5/LabVIEW/problem-with-append-table-and-Word-2010/TD-p/1268246

    and

    http://forums.NI.com/T5/LabVIEW/report-generation-MS-Word-table-bug/m-p/1605170

    I'll try the workarounds suggested and report back...

  • I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

    I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

    Describe how you run chkdsk.

    That is what the report said: you have problems with the sys file?

    CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

    If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
    Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

    Here's how Microsoft explains this observation:

    "... CHKDSK may report that the disc is damaged, even when there is no
    current real corruption. This can happen if NTFS happens to modify
    areas of the disc on behalf of some programme activities that CHKDSK is
    review at the same time. To check a volume correctly, the volume
    must be in a static state, and the only way to ensure that the State is
    to lock the volume. CHKDSK only locks the volume when /F or/r (which
    involves the 'F') is specified. For example, you may need to run CHKDSK more than
    time so that it can complete all the steps in read-only mode. »

    If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

    Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
    Restart by answering Yes to the question:

    Would you want to check this volume to be the next time the system restarts?

    If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
    chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

    If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
    Winlogon events and a source have the date and the duration nearby time chkdsk.

    It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

    Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

  • Report Generation Toolkit and Application Builder

    I'm going crazy trying to get out.

    I am trying to build an EXE using Application Builder program. The program uses the Office Report Generation Toolkit.

    I tried including the dynamic screw in the project, the computer development and the CD. I still have the same problem: the application does not start Excel. It's as if the commands are going into a black hole. It's not even an error message.

    I enclose my VI report for you to view. Any help is appreciated.


  • Why my computer reports that "There was a problem sends a command to the program" when I opened a word document?

    My computer has Windows 7 Professional as an operating system. I use Ms Office 2007 and put in level to the Service Park 3. My computer cannot open document word directly and always reports "it was a problem with sending a command to the program" I tried to reinstall word and or office upgrade to SP3 but the problem persists. What can I do to enable the command to send to the program?

    Hello Amolo,

    Thank you for visiting Microsoft Community.

    If you experience a problem when you use Microsoft Word mau you try the steps in the article mentioned below and see if it helps.

    How to open documents using the open and repair in Word

    Hope that the information provided is useful. Let us know if you have questions related to Windows, we will be happy to help you.

    Kind regards

  • Trying to capture what reports are running and what users

    Hi all

    A few months ago, we went to Discoverer 11 g. One of the patches that I expected was the update of the table of query statistics to see which reports are running and that was their execution.

    The problem is that most users run Discoverer more but they are not "free" closing more discoverer via file-> exit. They hit just ths 'X' to close the window. Oracle says that when users, their statistics are not written for query statistics tables. I find that the EUL workbooks that we installed are pretty useless because of this and really the only reason why I left the query statistics logging is enabled. I'm now seriously disable this because it is very inconsistent (cut out us statistics of query on a rolling table 180 days of history via the simultaneous program that removes the stats more than 180 days).

    I was wondering if anyone here has made any record of what files are managed through some triggers? I see there is a trigger EUL function that we have in place, called message save documents, recording the name of the workbook, sql, etc.. But it does not record the date on which it was run. Is that what someone has changed this trigger so that whenever a report is run, it saves the sql report, user and when there was ongoing at the table?

    "" I have a SR Oracle open, I asked this in two different ways, but they keep coming back to a canned response of "If the user does not do file-> exit, it will not save their session for the statistics of table... blah blah blah."

    I hope that I am sensible in what I ask.

    Thank you.

    Kind regards
    Jerry

    Hello

    I have never found the stats of discoverer to be very helpful for some of the reasons you gave.

    I see that a trigger EUL will do what you want that unfortunately there is no trigger to open document. In order to obtain information, you must rely on the user to save the workbook.

    An option that you can explore is to use a policy of (fine grain access) DBMS_FGA to audit certain discoverer query statements. For example, you can add a FGA strategy at the EUL5_DOCUMENTS table that selects records all on the table. This will show that users open the workbooks that you have in the EUL. Or you could add a policy to the tables/views used in the audit and discoverer workbooks then selects it with a condition of audit to audit only the discoverer sessions.

    How to do this depends on exactly what you want to audit.

    Rod West

  • BAD RESULTS WITH OUTER JOINS AND TABLES WITH A CHECK CONSTRAINT

    HII All,
    Could any such a me when we encounter this bug? Please help me with a simple example so that I can search for them in my PB.


    Bug:-8447623

    Bug / / Desc: BAD RESULTS WITH OUTER JOINS AND TABLES WITH a CHECK CONSTRAINT


    I ran the outer joins with check queries constraint 11G 11.1.0.7.0 and 10 g 2, but the result is the same. Need to know the scenario where I will face this bug of your experts and people who have already experienced this bug.


    Version: -.
    SQL> select * from v$version;
    
    BANNER
    --------------------------------------------------------------------------------
    Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
    PL/SQL Release 11.1.0.7.0 - Production
    CORE    11.1.0.7.0      Production
    TNS for Solaris: Version 11.1.0.7.0 - Production
    NLSRTL Version 11.1.0.7.0 - Production

    Why do you not use the description of the bug test case in Metalink (we obviously can't post it here because it would violate the copyright of Metalink)? Your test case is not a candidate for the elimination of the join, so he did not have the bug.

    Have you really read the description of the bug in Metalink rather than just looking at the title of the bug? The bug itself is quite clear that a query plan that involves the elimination of the join is a necessary condition. The title of bug nothing will never tell the whole story.

    If you try to work through a few tens of thousands of bugs in 11.1.0.7, of which many are not published, trying to determine whether your application would be affected by the bug? Wouldn't be order of magnitude easier to upgrade the application to 11.1.0.7 in a test environment and test the application to see what, if anything, breaks? Understand that the vast majority of the problems that people experience during an upgrade are not the result of bugs - they are the result of changes in behaviour documented as changes in query plans. And among those who encounter bugs, a relatively large fraction of the new variety. Even if you have completed the Herculean task of verifying each bug on your code base, which would not significantly easier upgrade. In addition, at the time wherever you actually performed this analysis, Oracle reportedly released 3 or 4 new versions.

    And at this stage would be unwise to consider an upgrade to 11.2?

    Justin

  • When running scheduled report, receive error message "table or view does not exist.

    This is the first time that we play with the planning reports. We can schedule a report to base without problem, BUT when the report begins to call database packages it starts mistake. We found the package is called end but when it's a SQL query he does not know the scope of the table. For example if the code says "select * of per_all_people_f' he doesn't know what per_all_people_f. BUT if I change the code to specify the owner of the table ' select * from hr.per_all_people_f' then it will run successfully."

    In discoverer we have it set up so that a generic user db (DISCO_SCHEDULE) is used when running scheduled reports. I searched metalink and we run scripts of Oracles about this user setting. At this point, we think of creating a group of synonyms for tables of this error, but thought that it had to be a better way.

    Anyone have any ideas on how to solve this problem? Their a configuration step we missed when setting up the user db DISCO_SCHEDULE?

    Thanks in advance for any assistance received.

    Marty

    Hello

    Your problem is that you call the function hr_general.decode_person_name the DISCO_SCHEDULE user and like most HR packages, the package hr_general is defined with the current_user rights. Therefore, the package will use the privileges of the current user when the package is run.

    You can try to grant privileges to the tables to the DISCO_SCHEDULE user and creating the necessary synonyms, but you will struggle to get this working. HR packages refer to other packages and tables, and ensure that you have all the privileges that are put in place will be virtually impossible.

    Another approach is to create a view owned by APPS that makes calls to the hr_general package. You can also create a wrapper function which is owned by APPS and created with the copyright that calls the package hr_general. You can then call this package instead of using hr_general.

    Rod West

  • My Firefox exit and gives a "not responding" message once I used Google Mail. I tried to boot into "safe" mode and the problem persists.

    I have a question where Firefox wont ' quit and give a message "not responding" after I've been using Google Mail. It works fine when I'm not using this program. I tried Safe Mode and the problem still happens when I go on Google Mail, so it is not connected with modules, extensions, etc.

    Hello

    The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.

    Note: This will make you lose all the Extensions and preferences.

    • Sites Web open is not recorded in less than 25 versions of Firefox.

    To reset Firefox, perform the following steps:

    1. Go to Firefox > help > troubleshooting information.
    2. Click on the button 'Reset Firefox'.
    3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
    4. Firefox opens with all the default settings applied.

    Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

    This solve your problems? Please report to us!

    Thank you.

Maybe you are looking for

  • Newtab page shows for half a second and then disappears

    When I opened a new tab, the "newtab" page appears for less than half a second, then disappears and shows a blank page. I tried everything I could find in the help section.l I use 13.0 and just upgraded.I treid the addon "newtab url." I tried the the

  • Skype to go step by step and costs

    I live in the Canada and use Skype to call landlines in the United Kingdom using Skype credit. I call when I'm on wifi but want to understand Skype to Go. I have a Slype number of GB, but I'm confused. It shows as a local number to me, I will call th

  • Please check that this is not a bug.

    Hello, honored engineers! I have a problem with this code in LabView 8.6.1 and 2009. I do not understand why an application crashes when I press a button. All versions of LabView are saved and activated. And I know that there are problems with the St

  • Can we, pleasae, five me adefintive respond to this error: [error number: 0x8024400A]

    This is the text with the error: the site has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. [Error number: 0x8024400A] I don't have much hair left and I'm pulling

  • More how many times can I install windows XP Pro

    I have several disks of windows xp, but we missed activations for authentic.How more activations are left or how much was there in the first place.I have the MSDN site.