MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = not signed?

Recently, MS windos XP sp3 fails to recognize the common plug & play devices.  Says error message "software not signed" then demand load anyway?... I say yes, but the charger just an infinite loop, preventing the drivers to load.

MS refuses to load software for printer Plug & Play, [Kodak ESP7] and Viewsonic monitor. MS = unsigned.  Was the load ok previously.

This is how I have to upgrade?  I have five computers and two are 98 and 95 for some software.  That line.  TonyR

The signed data are perhaps crushed or damaged on the HARD drive.

Hello

See this Microsoft KB article and check if that helps.

How to troubleshoot unknown devices listed in Device Manager in Windows XP

http://support.Microsoft.com/kb/314464

When you install a device driver and Windows detects that it is not digitally signed, you receive a warning message and the option to cancel or continue the installation this message only appears if your computer is configured to display a warning message whenever an installation program attempts to install a device without a digital signature driver.

Note A device driver is signed digitally can still be listed as an unknown device in Device Manager.

For more information about driver signing for Windows, see the Microsoft Web site at the following address:

http://www.Microsoft.com/whdc/devtools/ddk/default.mspx

Tags: Windows

Similar Questions

  • Software for printer C410 starts but does not load.

    Software for printer C410 starts but does not load.  Using Windows 7 Home Premium SP1 on a Pavilion HPE-140f. Click on install and the process starts, goes in all the scans and the two notations. When I click on load it just goes dead and will not charge.

    Try to run the installation once more

    Once to reach the license not agree, click on the link 2 (use of connection Internet

    Make sure that both options are defined as no, thank you, approve and proceed with the installation

    You see no progress

    If the same appears, please specify whar you are which means by "going dead" - is there a specific error message?

    Specify as detailed as possible, a screenshot can help to understand better as well.

  • try to reinstall CS on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. My hard drive crashed with all my software on it, then

    Hello - I'm trying to reinstall CS3 on my MacPro which is not online. It runs OS 10.5.1.  He is a dedicated computer for printing on an Epson 7900 and I intentionally keep the older CS3 for this purpose. (compatibility).  My hard drive crashed with all my top software, so I replaced the drive and now trying to reinstall my CS3. How can I do this without an internet connection? It will not take my initial activation codes, and this computer is not online. pointers out there?

    Contact support Adobe by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  • Why Vista WMP can't play .asf files and why MS has not created a fix for this?

    Why Vista WMP can't play .asf files and why MS has not created a fix for this?

    Hi pdaamckechnie,

    The ASF Format (Advanced Systems) is the preferred Windows Media file format. With Windows Media Player, if the appropriate codecs are installed on your computer, you can play audio content, video content, or both, that is compressed with a wide variety of codecs and that is stored in an .asf file.

    You can check the link below for more information on the types of media files that supports Windows Media Player
    Information on the types of media files that supports Windows Media Player
    http://support.Microsoft.com/kb/316992

    See the link below for more information on codecs.
    Codecs: Frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • I just bought the photography package, hoping that it would be more storage for backup, etc. in CC. And now I can not even find where to buy them more storage cloud, the 2gig won't be enough for me.

    I just bought the photography package, hoping that it would be more storage for backup, etc. in CC. And now I can not even find where to buy them more storage cloud, the 2gig won't be enough for me. Where can I buy more storage?

    Currently, there is no option to purchase additional storage through the creative cloud.

  • I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

    I have a Macbook Pro. I upgraded 10.9.4 one downloaded the demo for creative cloud. It downloaded and installed, but does not open. I stopped and tried to reinstall. The same problem.

    Thank you.

    I came across the solution. In addition to download creative cloud, I needed to return to the site and download the trials for the programs I want to use - Photoshop and Lightroom. Once I did, I was in business. Save bad if this was done in light on the download site.

    Thank you

  • Error loading software for my second 8600 pro printer

    I encountered an error when I tried to load the software for my second PRO 8600 printer disk. Apparently, I must first of all remove the first printer before I can install the second one. My laptop does not recognize the second printer to this place, as it is the serial number is different.

    Hello

    As the software is already installed, you must configure the new device only...

    First go to control panel > devices and printers, remove an existing instance of the 8600 and reboot your PC.

    Then go to start > programs > HP > HP Officejet Pro 8600 and select Configuration & printer software.

    Click on connect a new printer and follow the steps to configure the device.

    Shlomi

  • B110a Photosmart All in One printer loading software for Windows 7

    Have a new unit but software will open in Vista, but not for Windows 7, try CD, download and also such HP Officejet Pro 8500 A909A recommended by HP centre. Still get fatal error code 08573521 also mentions the MSI file. SCAN. Any body recommend a solution to loading the software for Windows 7-bit

    Thank you

    Bob

    HI - go ahead and try following the steps described in this document.  I'm not sure that identifies the specific error, you see, but take a look through the document and it should offer a few suggestions that might solve the problem.

    Hope that helps.

  • Vista drivers & software for printer Photosmart 1000

    I got a HP photosmart 1000 for 3 years now and I drives, and I've never had a problem with any computer, I got - were not HP! Now, I buy like laptop HP Compaq Presario x 64 and I'm unable to use my HP printer. I love my printer and have endured years of ink cartridges 40 - 50.00. However, if I can't download the drivers and software to load this printer on my laptop HP with Vista 64, then I not replace my printer with another HP. I love the quality of the printer and its functions and were willing to make compromises on pay more to the price of the cartridge costs. But, if I have to pay, simply because I just buy a computer "nine" at HP, then I will be replaced by the new Xerox printer.

    Does anyone know if there is a download with the drivers and software for this printer to work to Amend be recognised by Windows Vista? Please let me know. I appreciate all the advice!

    Thank you

    Angeleyez wrote:

    I got a HP photosmart 1000 for 3 years now and I drives, and I've never had a problem with any computer, I got - were not HP! Now, I buy like laptop HP Compaq Presario x 64 and I'm unable to use my HP printer. I love my printer and have endured years of ink cartridges 40 - 50.00. However, if I can't download the drivers and software to load this printer on my laptop HP with Vista 64, then I not replace my printer with another HP. I love the quality of the printer and its functions and were willing to make compromises on pay more to the price of the cartridge costs. But, if I have to pay, simply because I just buy a computer "nine" at HP, then I will be replaced by the new Xerox printer.

    Does anyone know if there is a download with the drivers and software for this printer to work to Amend be recognised by Windows Vista? Please let me know. I appreciate all the advice!

    Thank you

    If it's the Photosmart 1000, which uses the cartrdiges 45 # and #78 (introduced in 1998 about...) the driver Deskjet 970 should provide a good match for printing.  Go to the printers, add printer folder, and then select the Deskjet 970.

  • Impossible to install the software for printer AIO C6250

    Whenever I try to install the software for my printer C6250, I get an error message saying "unable to find a specific file" the file is C:\Users\DrAnth-1\Appdata\Local\Temp\7zS5FBE\setup\... \blocksysus.

    I can't find this file on my computer.  The installation stops and I'm back where I started.

    Can someone help me?

    Tony, you updated to Vista? To run the cleaning brush to make sure that we get rid of everything left on the software. Heres how:

    Of the Original installation CD:
    1. Insert the CD in the drive and then cancel Setup
    2. open my computer and click right then on the CD from the drive and select open
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://www.Adobe.com/support/flashplayer/downloads.html
    9 download drivers and full software features
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
    10. run the download to reinstall the printer

    If the software has been downloaded and extracted to your system:
    1. type % temp % in the field of race
    2. Locate and open the folder starting with 7z (example: 7zS2356)
    3 open the Util folder
    4 open the CCC folder
    5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe
    6. once the uninstall is complete, restart the computer
    7 run the Accessories\ System Tools Disk Cleanup
    8. download and install the latest version of Adobe flash player
    http://www.Adobe.com/support/flashplayer/downloads.html
    9 download drivers and full software features
    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-76043-1&cc=us&DLC=en&LC=en&OS=4063&product=3308554&sw_lang=
    10. run the download to reinstall the printer

    Let me know if this solved your problem.

    Thank you!

    Sean

  • ScanJet 4890: Problem loading software for the scanner

    When I try to load the software from the CD, it tells me that I must have administrator rights, tells me to connect off & on again.

    When I do all this happens just with the absurdity even. How to overcome this obstacle annoying & useless?

    (And yes I AM the ADMINISTRATOR)

    Hello

    The Scanner is old enough, it was made in a preliminary manner release of Windows 7, and thus the CD is not designed for Windows 7.

    Download and install the software Windows Visa and stable on your Windows 7 machine using Compatibility Mode.

    First save the Vista software below on your computer:

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=447377&swItemId=sj_50009_1&swEnvOid=2100

    Then install it using Compatibility Mode by following the instructions in the following article:

    http://h20566.www2.HP.com/hpsc/doc/public/display?docid=emr_na-c03129972

    Kind regards

    Shlomi

  • then I get the installation software for printer lexmark 5650 has failed the windows logo test, then @usb or ethernet point during installation it won't end up as I run the usb cable

    When you install the software for lexmark printer 5650 to test the logo point to install windows, then @usb or ethernet I can't complete install because it will not recognize the usb cable

    Hi Spudly49.

    Thanks for posting. You are using an OS 32-bit or 64-bit?

    If you use a 32 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR2226&segment=support&UserLocale=en_US&locale=en

    If you are using a 64 bit OS, please download and run the driver located here. http://support.Lexmark.com/index?page=content&ProductCode=LEXMARK_X5650&ACTP=product&ID=DR3915&segment=support&UserLocale=en_US&locale=en

    I hope this helps! Shawn - Support Engineer - MCP, MCDST
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • How can I load software for the scanning device "neat"?

    I recently bought a "stick" used "Pure" scanning device and was not given to any software.  They said I can go online and 'download' software which I was not able to do.  What step am I missing?

    This forum is for posting comments on the web site of Microsoft Answers, not to ask for help with unfamiliar material.

    Two seconds with Google would find your answer for you.  http://www.neat.com/support/downloads

  • ENGLISH driver & software for printer F2180

    Hello

    Hope someone can help me, have been download/try all afternoon & I'm going nuts now!

    I want the driver & software for my F2180 after I reinstalled Windows7 (32 bit). Select the language I want ENGLISH, but whenever I extracted the file & go to install I have the Dutch version! What's happening & how do English?

    I used this:

    DJ_AIO_NonNet_Full_Win_WW_130_140.exe [1/1, 245.67 M]

    I looked around here too, but getting links for this one (and still get it in Dutch after download!) or a version of Vista is not working.

    Help!

    Thank you!

    What is the non-Unicode language setting in the region and language and administration?

  • Dell inspiron n5010 laptop computer running XP, when I try to open my software programs including Internet Explorer, they hang and Manager tasks indicates "not responding".

    I have a dell inspiron n5010 laptop and when I try to open my software programs, including Internet Explorer / Outlook Express they partially open but not completely open and just hang out there. When I go to the Task Manager, I get a message 'not answer' for the program. I then started the pc using F12 and got the error OFOO C. 133 talked to Dell and they tell me that it is a Windows 7 problem. Can someone help me with this issue please!

    Separated from the:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Inspiron-15-XP-laptop-getting-error-code-0f00133c/fd3d76ad-Ca4a-4830-9ef1-17ccb9a7d9f4

    Hello

    1. did you of recent changes on the computer?

    Method 1:

    It is possible that some third-party programs installed on the computer is causing the problem.

    I suggest that you put the computer in a clean boot state and check if it helps.

    To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

    See the link below to learn more about how to clean boot.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Reset the computer to start as usual

    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    (a) click Start, type msconfig in the search box and press ENTER.

    (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

    (c) under the general tab, click the Normal startup option, and then click OK.

    (d) when you are prompted to restart the computer, click on restart.

    Method 2:

    You can also try the steps of troubleshooting provided in the link below to fix the problem.

    Computer stops responding with a black screen when you start Windows XP

    http://support.Microsoft.com/kb/314503

Maybe you are looking for

  • Toshiba virtual Store account Reset - 33709

    Please reset my Toshiba e-store account - 33709 Post edited by: dragon

  • 3G Mobile Hotspot free now after update 2.3?

    I remember opening application 3G Mobile Hotspot back on Froyo and see a message saying that I need a commitment plan to use it or I'll get charged. After the update to Android 2.3, 3G Mobile Hotspot application is no longer gives this message everyw

  • HP-P2-1394: HP Solutions Framework Support will not install or uninstall

    How do I manually uninstall HP Solutions Framework Support so I can install the latest version?  I need to get the latest updates of firmware for my computer. I am running Windows 10 (64-bit), but the problem started with Windows 8.1.  When I go to t

  • Where is tools?

    I just got a new HP laptop and I am trying to enable Silverlight that is installed on my computer. So I can watch movies on Lovefilm. He to tell me to change it to activate in TOOLS. Where is the tools and how to do for her.

  • HP Deskjet 1050 All - in - One J41: scan lost desktop icon!

    I had to update Windows and reinstall my software Deskjet 1050 but installation disc indicates that my computer is not compatible (Windows 8.1) and will not be installed... It requires a previous version of Windows. I downloaded and installed the dri