MS Wireless Laser Mouse 6000. When I test of arrow to scroll/bounce backwards and forwards

I have a MS Wireless Laser Mouse 6000. For a while it was fantastic, but now, everytime I try the / arrow scrolling through columns of docs, images or e-mail items moved with the cursor (on the side or on the bottom) begins to bounce back and forward and points of view moving vertically (or left and right uncontrollable.) To increase the frustration, sometimes things work normally for a short period before the fun begins. When I change to a basic mouse (USB) there are no more problems! : O Tony

Advertisement

Most often when a device does not work, it's because the driver has been corrupted.

Try reinstalling your.

http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

http://captaindbg.com/how-to-update-drivers-on-Windows-7/

Tags: Windows

Similar Questions

  • Wireless Laser Mouse 6000 v2.0 does not connect to the Wireless Desktop 3 receiver. 0a

    Hello

    I'm having a problem, try to use a Wireless Laser Mouse 6000 v2.0 with a wireless desktop receiver 3. 0a. My previous mouse, wireless laser Mouse 5000 connects fine but the left click button is inadmissible about half the time so I bought the Wireless Laser Mouse 6000 v2.0 to replace. Laser mouse 6000 v2.0 works fine on my laptop with the usb receiver that comes with it, but I would like to use this mouse if you use my office receiving office 3. 0a that connects my microsoft comfort keyboard 1027 and all other previous microsoft mouse that I have owned. I downloaded and installed the latest drivers point software and smart and still it does not detect or connect the mouse 6000 v2.0.

    I tried to use the usb receiver supplied with this mouse on my desk but he won't my keyboard (comfort 1027), but the mouse works fine when using the usb receiver. Any suggestions to get this mouse works with my receiver older are greatly appreciated! Thank you

    Hi Mburton8899,

    It must have the same version of the receiver in order to work properly. Unless the mouse is bluetooth, it can only pair with the USB dongle, with which he came.

    Hope this information is useful.

    Jeremy K
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • MS Wireless Laser Mouse 6000 v2.0 cleaning

    Is it safe to open the mouse laser to clean the wheels. It sticks so badly, I can hardly use it.  (Less than one year)

    Hello

    Not really sure that Microsoft would say a situation where there need cleaning. Personally
    I would like to clean however remember I am not an employee or a representative of Microsoft.

    Wireless Laser Mouse 6000-3 years warranty
    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=010&active_tab=systemRequirements

    Microsoft Hardware warranties
    http://www.Microsoft.com/hardware/warranties.mspx

    The mouse comes with a support tech 90 day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.

    -------------------------------------------------------

    Take apart can void your warranty.

    Microsoft Wireless Laser Mouse 6000 cleaning
    http://www.iFixit.com/Guide/repair/Microsoft-Wireless-Laser-Mouse-6000-cleaning/3028/1

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • install Microsoft wireless laser mouse 6000

    Hi, I bought used ms laser 6000 wireless mouse, this one: http://www.microsoft.com/hardware/en-us/d/wireless-laser-mouse-6000 and now I can't find it on the bluetooth on my laptop, I have Bluetooth v2. The mouse requires installing with usb receiver or is it regular bluetooth mouse like those of ebay, you can buy?
    I don't have a usb mouse with receiver and I thought it's ok because it should work on the bluetooth connection, but I can not connect, bluetooth it will not identify not even with the 'Connect' button on the mouse. the mouse works because the laser light is on.

    It is not a Bluetooth mouse.  This is a RF mouse and requires the receiver supplied with the mouse.

  • Wireless laser mouse 6000 v2.0 freezes / causes other problems.

    I had the wireless laser mouse 6000 v2.0 and the keyboard since April, but the problem just started occurring. I'll start my computer (I have Windows XP) and everything will be fine. As a first step, I can click on the start menu, but if I open a window, it seems that whenever I go to click on the window it will click out of it so I can't select it. From there on, I can't click on anything, no icons or anything. I have to press ctrl alt del to be able to click on the window or another program. I also discovered while I was in Internet Explorer I would surf the web, and he would start pages like I'm pressing the back button to return.

    I already tried things:
    -Uninstall Intellitype, uninstalling the drivers.
    -Change the USB ports.
    -Elimination of some programs / firefox & internet explore [I thought that maybe a bug as possible.]
    -Completely nuking my computer and put a new new version of Windows XP.
    None of them worked.

    The only thing that worked was to move the mouse and the keyboard with my old mouse and keyboard that are not wireless. This is driving me crazy. I just received it and had no problems until recently perhaps an update of some sort, but now he does it on a fresh new copy of XP. What other options do I have?

    I had problems by two different laser mouse 6000 V2, on one, the right click does not work except sporatically, now my other mouse is having problems with the left click function.  I am about to replace the micro-switch SPST (I think that's true) to see if that fixes it.

    FOR INFO!

    I contacted microsoft on this subject (on the defective mouse) about 1 year... less than 2 weeks I received a COMPLETELY NEW mouse AND keyboard NEW in box to NO FEES, no RMA, NO return and was NEVER billed for replacement.  I ended up giving the other combo to my brother and he still works fine (other than the hard drive to use right click on the service), the same thing is happening to this mouse, it is difficult to make a left click, sometimes it works, sometimes, it is not click at all, sometimes it double click on...

    Give it a try, send an email to microsoft.

    I think they have problems with their defined wireless desktop V2 and replace without charge, without admitting a problem.

    Hope this helps somehow.

    PSS, if you have NO function of the mouse AND keyboard, or just the mouse work not at all (NO movement etc.) I had a neighbor install a just CB radio next... frequency RF interfered with the signal RF mouse and the mouse (and sometimes the keyboard) refused to work as long as he handed (IE holding the key to the transmission on the CB).  Sorry if this seems rudimentary, but some people have trouble understanding certain issues so I try to make them as simple as possible.

    The rule that follows:

    Interference RF (CB, other wireless devices on the same frequency (of HAM Radio etc.),

    Exclude the above listed issues.

    Otherwise, it would appear that you have either A: a bad receiver (The Oval device plugged into the PC), or B: a bad mouse RF transmit/receiver.  Anyway that I will try to return the product I used the Wireless Desktop 6000 V2 over 3 years with NO problems other than to wear down me the switches in mice.  (I use my PC very strongly).  Try emailing Microsoft for a replacement, it can't hurt and maybe you'll get a new like I did!

  • Compatibility of the 'wireless laser mouse 7000' with 'wireless laser mouse 6000 receiver.

    Hello

    One of my colleagues gave me his extra Wireless Laser Mouse 7000, but he gave me a Wireless Laser Mouse 6000 receiver. will be the mouse 7000 and 6000 receiver work? are they compatible?

    help someone?

    Hello

    Yes those should work - just install the software (Intellipoint) and configure the mouse than the 7000.

    IntelliPoint - free
    http://www.Microsoft.com/hardware/download/download.aspx?category=MK

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Wireless laser mouse 6000... transmitter/receiver

    I recently bought a mouse wireless 6000 (last week) and I lost the transmitter/receiver... where and how can I buy a replacement radio... Please help. Vince

    Hi VinceMcNeilly,

    You can see the following link.

    How to replace hardware or lost, broken, or missing Microsoft software

    See also:

    Computer mouse, keyboard, Webcam & more | Microsoft Hardware

  • Windows 7 64-bit: MS wireless Laser Mouse 6000 v2.0

    I upgraded my system from Vista to 7.  Any text or URL with multiple pages jumpes to up and down, making it almost unreadable.  I deleted the software for the mouse several times and installed the MS software, but in vain.  MS has not been useful.  What version of Intellitype Pro Intellipoint software should I use to fix this problem.  Ed

    When you download the driver try right click on the .exe, and then selecting the option "Run As Administrator"?  Perform, even if your user name is an administrator.

    What happens if you test the "Safe Mode with networking"?

    Startup options (including safe mode)
    http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
    http://support.Microsoft.com/default.aspx/KB/929135

    You get the same behavior if you test with another mouse?

    You get the same behavior if you test with another Windows user?

    What browser you use, and what did you use it in Vista?

  • Microsoft Wireless Laser Mouse/Keyboard Version 2.0/3.0

    Hello!

    I was wondering if I can use my v2.0 USB Microsoft 2.4 GHz TRANSCEIVER that works for my keyboard Microsoft Wireless Laser V3.0 and my Microsoft Wireless Laser mouse V2.0 work for my other keyboard and mouse because I lost the transmitter/wireless receiver I had to for use. Anyway, the keyboard is called: Microsoft Wireless Laser Keyboard 6000 v2.0 and mouse is called: Microsoft Wireless Laser Mouse 6000 (there is no version on that). Also, if I can't use the USB with my keyboard and mouse, I was wondering if someone could fix my mouse? My mouse will not move. I move the mouse and my clicker or this thing won't pass. And then sometimes I can just click on it! Please help on these two problems. Thank you very much!!! (:

    Hello

    For Microsoft hardware related issues, you can have a look at this link:

    http://www.Microsoft.com/hardware/en-us/support/troubleshooting

  • Mouse Microsoft Wireless Laser Desktop 6000: do not use the new Intellipoint

    I have the Wireless Laser Desktop 6000 B7T-00020-B. The keyboard works fine with the latest driver, but the Intellipoint software recommended for this mouse [model: 1052] by Widows Update causes instructions magnifying glass and the mouse to start randomly wih no way to stop it. You have to start in safe mode to remove the driver, BUT it leaves a condition behind this function of normal mouse affect. Menus not roll down and stay, they go too fast click. The button in the Explorer does not work. My challenge was to re - install Intellipoint, download Revo Uninstaller and start in safe mode and used to rub the driver anywhere.

    Hello Elvinbrent,

    I suggest you to check with the Microsoft Hardware support for more information.

    http://www.Microsoft.com/hardware/en-us/support

  • Driver Wireless Laser Mouse (PA3706E-1ET1) problem software on Windows XP

    I have a Toshiba Wireless Laser Mouse PA3706E-1ET1 that gives a serious problem with the MouseDriver.EXE software provided on the CD with the mouse.

    * First release _ * _: when you install the driver on the CD I get an error message saying that they are not certified by Microsoft. The documentation that came with the mouse has an additive brochure that says about it and ignore that the software works without any problem.

    * _The issue_ *: with the mouse driver, I get a mouse icon in the windows taskbar and clicking on it will allow me to set up all the extra buttons running. Everything works very well at this point. The problem occurs when I try to shut down Windows (this is Windows XP) it will fail to finish. It seems to me close a few icons in the status bar, but then it stops. I can click on stop again and it still will not close. If I click with the right button on the mouse icon of toshiba in the windows taskbar and click EXIT in the drop-down menu, then shut down Windows and then stops. It seems that the mouse driver is to avoid a stop down. This is what is displayed in the event viewer:

    Event type: WARNING
    Event source: USER32
    Event category: no
    Event ID: 1073
    Date: 02/07/2009
    Time: 10:53:03
    User: NT AUTHORITY\SYSTEM
    Computer: PC
    Description:
    The attempt to shut down the PC

    For more information, see Help and Support Center in [http://go.microsoft.com/fwlink/events.asp].
    Data:
    0000: 00 00 00 00...

    * _Third issue_ *: it is serious, I have Microsoft Virtual PC. When I launch and run any VPC I get a blue screen of death. The error is DRIVER_IRQL_NOT_LESS_OR_EQUAL and the offending component is SysMouseFilterF3.sys.

    If I uninstall the mouse driver that disappear from all of the above questions. The mouse works but not all buttons. Scrolling the mouse left + right, vertical and the back and buttons before work, but the parchment of horizontal tilt and two additional buttons do not work.

    I can't find any mention to my model mouse on Toshiba or the Internet in general. Is there an updated driver for this mouse or in any way I can solve problems above without losing the functionality of the extra buttons?

    -Andy

    Re: Toshiba Wireless Laser Mouse PA3706E-1ET1 (which is appears as 'Sysgration USB mouse' in hardware)

    Yes, Andy, I have the same problems with this mouse. No driver updated (or even original) with a view to anywhere.

    Called Toshiba - all they could suggest "just use the drivers on the CD" and unable to offer any other suggestions!
    No drivers on PC World UK (seller) or Sysgration site or the other.

    Author of the driver (info email the driver DLL) contacted but no response until now.
    SysMouseFilterF3.sys does not seem to be the culprit because it causes a blue screen of death on the startup of the system.
    In order to get the mouse to work I just uninstalled Sysgration drivers and delete the mouse in the hardware list.

    Windows Xp then tried and it seems to work ok with driver default for Microsoft - but only right + left, scroll, front + rear, Alt + Tab appear to function.

    Colleagues, it takes up to a new driver appears!

  • Bluetooth Stack for Windows by Toshiba with Microsoft Wireless Laser Mouse 8000

    I use the battery Bluetooth for Windows by Toshiba - Version v5.10.01 (T) and I am trying to connect to my Microsoft Wireless Laser Mouse 8000. But the Bluetooth stack does not even see the mouse.

    It only works with the dongle... but I don't want to use a dongle when I already have Bluetooth installed in my laptop.

    Any suggestions appreciated

    Hello
    Before starting any discussion can you please tell us which laptop model you have?

    BTW: What is your BT mouse has own dongle BT?

    See also http://aps.toshiba-tro.de/bluetooth/pages/faq/keyboardnotworking.html

    Good bye

  • Wireless Mobile mouse: 6000 does not?

    Wireless Mobile Mouse 6000 PDC, there was already a given solution to get them to work?  I have ensured that the proper drivers are downloaded, there are new batteries and so on.

    Hello

    The Wireless Mobile Mouse 6000 has a 3 year warranty.

    Microsoft Hardware warranties
    http://www.Microsoft.com/hardware/warranties.mspx

    The mouse comes with a support tech 90 day of the 1st incident that was about to begin when
    contact Microsoft at the number below.

    Hardware support of MS and warranty claims
    Tech Support 1-800-936-5700 for MS Hardware.

    I hope this helps.

  • Need a Wireless laser desktop 6000 Transceiver

    Wireless laser desktop 6000 ARVA missing. Had an Executive take the box - remove the mouse and kb and threw the ARVA. Need a replacement. How can I get a.

    Thank you

    Mike

    As much as I know, they are not sold separately, but this is the wrong place to ask.

    Try here:

    • United States: (800) 360-7561, from Monday to Friday from 05:00 to 19:00 Pacific time.
    • Canada: (800) 933-4750, from Monday to Friday from 05:00 to 19:00 Pacific time.
    • TTY customers: Contact Microsoft at (800) 718-1599, from Monday to Friday from 05:00 to 19:00 Pacific time.
  • Microsoft wireless laser mouse 8000__

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

    I have a microsoft 8000 wireless laser mouse.  the problem is that when I put it on the charger it flashes green for about a minute, then he made a flashing red fast.  If anyone can tell me what is the problem I would really appreciate it.  Thank you a_trekker

    Hello

    http://www.Microsoft.com/hardware/mouseandkeyboard/ProductDetails.aspx?pid=084

    battery empty? or not connected? DoD you have intellipoint 7?

    have a nice day [url] [color = blue] www.microsoft.com/security download and install updates from Microsoft Update security! [/ Color] [url] [url] http://windows.microsoft.com/en-US/windows-vista/help/using [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.windowslive.com/HowItWorks [color = green] how to use Windows Live [/ color] [url] [url] [color = blue] http://windows.microsoft.com/en-US/windows/help Windows Help & how-to [/ color] [url] [url] http://windows.microsoft.com/en-us/windows-vista/help/top-solutions [color = blue] Windows Vista: Top Solutions [/ color] [url] [url] http://www.microsoft.com/windows/internet-explorer/default.aspx [color = green] Internet Explorer 8 : Homepage [/ color] [url] [url] http://windows.microsoft.com/en-US/windows/help/internet-explorer?browser=ie8 [color = blue] Internet Explorer Help home [/ color] [url]

Maybe you are looking for

  • Why my PC or iTunes is not recognizing my iPhoneSE?

    Why do I have had my PC or iTunes am recognize my iPhone SE? I removed iTunes and then recharged it and did the same for the iPhone. Always do not see my camera. Any help would be greatly appreciated!

  • Can't access my windows service install

    recently updated my adobe reader software. stopping.so wireless mouse when you try to reinstall my application ihome cd. I have error1601

  • Process of monitoring in Unix machine foglight 5.6.10

    Hi, I want to know how to monitor the process on the unix machine, we have foglight 5.6.10 as a legacy, we weight to appmonitor but now I think that the inheritance is no longer in use in this version Please notify

  • BlackBerry Smartphones SMS spam messages in charge $2 / day

    I received the unwanted sms text once a day, do not know how to block / it's a contest, only reference is 88588, but no email. I'm currently busy day $2,00 on my data plan and I do not know how to get this to stop? Any ideas appreciated mucho

  • HFM rule if custom dimension condition

    Hi Experts,I have the following requirement:If the Member of the Department is d6XXXX or a descendant of d6XXXX, thenR & D Labor and benefits is equal to work and benefitsThe Department is my custom dimension. I am not able to use it in the IF condit


HashFlare