MSConfig does not display the item (by default) startup under HKCU\Software\Microsoft\Windows\CurrentVersion\Run. Bug creates the feat of malware to hide the user startup items, msconfig.
The following question will fail be displayed in MSConfig
Windows Registry Editor Version 5.00
[HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]
@= "c:\\users\\steven\\appdata\\local\\temp\\6csjbd5.exe".
I came across this, after being attacked by malware. In general, I use MSConfig to disable all startup items when troubleshooting an attack and attempt to regain control of the system. MSConfig lead me to believe I had disabled all startup items, but he fails to show or disable the (default) entry to the registry key above. Indeed, it's an exploitable bug that is currently used by malware developers to hide from end users, armed with MSConfig. As a side note, CCleaner has the same problem. The only solution is to change the value directly using RegEdit (clear).
Hello
Method 1:
You can run Windows Defender in offline mode
http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
Method 2:
Analysis System File Checker and check:
I hope this helps!
Tags: Windows
Similar Questions
-
I encounter the error (can not open key: HKEY_local_machine32\software\microsoft\windows\currentversion\run...) when installing iTunes and QuickTime on my laptop (Windows 7, 64-bit operating system). Tried to change the registry key to make sure that I had (full control) in the registry key main (HKEY_local_machine\software) and all of its subkeys (including \Wow6432Node and \Microsoft) and restarted my PC. But I still get the same error message. What Miss me?
ORiginal title: HKEY_local_machine32\software\microsoft\windows\currentversion\run
I tried all the advice support online from Apple without success. Then I called Apple support and they want to charge me a fixed fee of $19.95 to Troubleshoot modifying registry keys with me. I refused, and this is why I post this question on the Microsoft Forum.
Did you follow this advice?
"Did you download and save iTunes on the desktop > then right click > select run as administrator to install.
And do you have displayed in iTunes community that is free to do?
Ask the question in the community Apple iTunes:
-
Hi all
The MSI failed with the error message as "could not write value vmware - tray.exe in \SOFTWARE\Microsoft\Windows'CurrentVersion\Run key. Make sure you have fufficient access to that key, or contact your support staff' while trying to install vmware workstation 11.1.0 in windows 8.1.
I tried to call the installer with run as administrator but it does not help, please suggest me overcome this error.Hi Vincentand welcome to the VMware communities!
This error indicates that you have some security software (antivirus or antimalware software) that protects the part of the registry. Can you try to temporarily disable all security software on your host computer and see if the installation can move forward?
See you soon,.
--
Darius
-
Hello im using windows vista 32bite many programs I tried to install arrived to the top with this error HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\windows\currentversion\run. Make sure you have sufficient access to that key! Yes I have all permissions. These programs include itunes, quicktime programs like this I really want of them as I went there on the forums to see if they have ideas and your doing I was just wondering do you pleaseThank youGAV
You must run high Regedit.
Start > Search > type: regedit
When regedit appears in the above results, right-click and choose "Run as Administrator". Provide the password/OK for the UAC area and Regedit open high. Now, you will be able to delete unwanted keys. Be very careful in the registry - a bad deletion can take all windows down.User - recommended configuration (Vista and Win7) accounts
You absolutely don't want to have only one user account. As XP and all other Windows 7, Vista, and modern operating systems are operating systems multi-user with integrated system of accounts as default Administrator and comments. These accounts should be left alone because they are part of the structure of the operating system.
In particular, you do not want account only one user with administrator privileges on Vista and Windows 7 because the administrator account integrated (normally only used in emergencies) is disabled by default. If you use as an administrator for your daily work, and this account is corrupt, things will be difficult. It is not impossible to activate the built-in administrator to rescue things, but it may require more work you want to do. Better not to get into a bad situation at first.
The user account that is for your daily work must be a Standard user, with the extra administrative user (call it something like 'CompAdmin' or 'Tech' or similar) only it for elevation purposes. As a user Standard is recommended for security reasons and will help protect your computer against infections. After you have created "CompAdmin", connect to it and change your normal user account Standard. Then log on to your regular account.
If you want to go directly to the desktop and ignore the Welcome screen with the icons of the user accounts, you can do this:
Start Orb > Search box > type: netplwiz [Enter]
Click continue (or provide an administrator password) when you are prompted by UACUncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null). MS - MVP - Elephant Boy computers - don't panic!
-
Some software does not display the user interface, such as my mcafee antivirus
For some time I have problems in some of the software running, they show any user interface when they start up. They just start and work properly but I have no display to change any thing or work on it as McAfee, hotspot shield etc thanks for the help
My problem was that some program did not display on them.
I solved this problem by using the mcscriptfix fileThanks for the reply -
menu start does not display the recently closed programs
I can't get the start menu to show all the programs that I recently closed, and this under the items added in the start menu, it shows the item titled my recent documents. I like being able to click on the Start button and see what I have recently been in programs.
Hello
What you specify is called list of the UPM (most frequently used programs list). The MFU list appears under the list of favorites on the Startmenu. This list tracks the frequency programs are used and displays them in order of the most used (on top) to least used (bottom).What exactly is your problem? This list is not displayed any program? or it shows some programs that have been used but does not add new programs to the list?
Possible solutions:1.right - click on the Start Menu and select Properties. Under the Start Menu tab, click the Customize button. under the tab general , in the program section to ensure that the 'number of programs at startup' is not set to 0. If your required number is already set, then clear the list by clicking the clear list button. Now open some of your programs and check if the MFU list now programs or not.2. If she has not worked for you, so now you need to check your registry settingsOpen regedit (start > run > regedit > OK)Navigate to one of the following keys- HKEY_LOCAL_MACHINE-Software-Microsoft-Windows------CurrentVersion------policies-Explorer
- HKEY_CURRENT_USER-Software-Microsoft-Windows------CurrentVersion------policies-Explorer
Remove NoStartMenuMFUprogramsList & NoInstrumentation values or set zero.
For more details, visit http://support.microsoft.com/default.aspx?scid=kb;en-us;292504
Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. http://support.Microsoft.com/kb/322756 -
When I open a link in a new window does not display the web address.
When I open a link in a new window does not display the web address. What have I done wrong? It used to work and it works if I open the link in a new tab, the problem is that I hate to use tabs prefer a new window every time... Help!
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.org/KB/safe+mode
-
URL address box does not display the current page.
With the 4.0.1 update, the URL address box does not display the current page.
All that shows is the text: «Go to web site»
To now see the url of the current page, you need to make a right click the empty space is the address box and press the button "esc".
Is there a way to display the url of the current page?
This problem may be caused by an extension that is not working properly.
Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions of the origin of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).
- Makes no changes on the start safe mode window.
- https://support.Mozilla.com/kb/safe+mode
-
Windows does not display the CD-ROM drive
A week ago, my computer stopped showing me an icon for my DVD player. When I go into the Device Manager there is no option for CD/DVD players. I tried Microsoft Fix It, and he told me that there is no CD drive. I can not re - install a driver because the Device Manager does not display the CD players.
I did not major changes to my computer I know so I can't imagine what the problem is. Help?
Trevor
Hello
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html==========================================================
After the foregoing:
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
BlackBerry Tour 9630 smartphones does not display the name of the caller
Hello
I have a Tour 9630, version sw 5.0.0.732. When the phone rings, it does not display the name of the caller, their telephone number, although this number is in my address book. Once I answer the call, the name will be displayed.
Naturally, I would like to know who is the caller before I answer! :-)
I found a few messages, ask something similar, although for different model phones. Some of them suggest that I have to disable protection for the content... but I can't find it in the options. Even in the User Guide, it contains instructions (go to Options > Security Options > General settings... but there is no "General settings" on my phone.)
If anyone knows how to solve this problem, I would be very grateful!
Kind regards
Options > Security > encryption > include contacts.
There could be other solutions... Try these:
1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.
Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.
* In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.
* For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '. -
My Firefox has just automatically updated itself to the version 42. The extention under modules page does not display the extensions I have installed. The plug in page shows the plug ins I installed. How can I fix it? This happened on my 64 bit Windows 7 partition. I installed the extension "classic add-on" to see if she could solve the problem. There is unfortunately no. I have a screenshot. I'm not sure if I have permission to upload it to the media gallery. I also use Linux, but I did not upgrade that are still there.
It is possible that there is a problem with the files that store the registry extensions.
Delete the files (extensions.json, extensions.sqlite, extensions.ini) extensions.* and compatibility.ini in the profile folder of Firefox to reset the extensions registry.
New files will be created if necessary.
See "extension corrupted files:
-
my iphone 5 s has been disabled. I'm trying to restore my iphone with itunes and itunes asks me to put the password for my iphone. but my iphone does not display the unlock screen. What should I do now?
Hello
Follow the instructions here:
-
My firefox does not display the icon fonts!
I use fontello.com for my web design project. But recently it does not display the icon.
and the strange thing is that its OK my Firefox friends and just my PC have the problem.
for example, this page shows icon on my friends firefox but I can't see the icons
https://DL.dropboxusercontent.com/u/28793409/fontello-d3b0f38a/demo.htmlThat's what I see
https://DL.dropboxusercontent.com/u/28793409/shot.jpgIf Safe Mode is good, the more likely culprits are one of your extensions or incompatibility of the graphics driver. To work around the second question, you can disable use of the hardware acceleration Firefox to see if that helps.
"3-bar" menu button (or tools) > Options > advanced
In the mini ' General' tab, uncheck the box for "use hardware acceleration when available.
It takes effect the next time you exit and restart Firefox.
-
I am the admin of Windows for a University Department and install PC with Firefox all the time. This problem does not occur with every PC I would maintain, only a selection bit (model different laptops with Windows and update 1 8.1.) Until today, it has happened with the new user (with admin rights) accounts that I place on laptops for our staff. Today, this happened with the account administrator while setting up a new laptop. In all cases so far, I have install Windows from a registered image that was created by using sysprep.
I tried many suggestions to reset Firefox, removing the profile of Firefox users, removing the Windows profile users, uninstalling/reinstalling Firefox, uninstall/reinstall of Firefox and the latest Java, but nothing helped. After uninstalling, I run an application to delete the caches and temporary files and even remove manually the keys to register HKLM\SOFTWARE\Mozilla and HKCU\SOFTWARE\Mozilla. I restart and make sure that the installation folder is deleted after uninstalling.
Results are the same: after installing Firefox 31, the initial settings for migration, IE or Chrome pop up and after having clicked on the button finish, Firefox starts but does not display the home page of the new user, only a blank page. By clicking on the Options (3 bars) button does nothing. Right click in the appropriate box, the shortcut menu appears, so I can choose to customize, but which opens another tab with subject: Customize the URL and the page is blank. In the right click context menu, I can activate the menu bar and get options from that.
My last attempt helped a little. I uninstalled Firefox 31, cleaned, removed the profile user Firefox, rebooted and then installed Firefox 30. Initial start-up runs and tells me that I'm not up-to-date and the works of button Options. But I can't always customize.
Then I upgraded to Firefox 31, but then it's back to no start page, no options button and no customization. I can go down to 30 and get customize practically works again.
Addon only is for McAfee Scriptscan to Firefox 15.1.0, just after installation is disabled.
Any help would be appreciated. Thank you.
You can try a different theme of Windows?
Have you tried to start the computer using Windows safe?
Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.
-
Navigation toolbar does not display the URL
When I go to a website, the section of the navigation toolbar that displays the URL of the page is no longer indicates the URL http://www as he always did in the past. The size of the part has been reduced. Has expanded the area where you type URL for search engine. I have no problem with the navigation, history, bookmarks, tabs bar, etc. Only problem is that the URL does not display the page. Even this page has no URL displayed in the navigation bar. It has the logo for mozilla and when I put the cursor on it, it says it all "Web site does not provide identity information." The same shows for each site than go. Yes, I can to bookmark the page without any problem and can use bookmarks to return to the page. But no URL appears in fact as he always did in the past. Oh, I have an IMac and use a keyboard of razor.
Hello.
You should be able to resize the address bar, if the search bar is to the right by simply sliding the space between the address bar and the search bar.
If that does not solve your problems, it is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?
Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and themes and this one for plugins.
If you need help with one of your modules, you will need to contact the author.
If the problem does not disappear when all add-ons are disabled, tell me please, then we can work from there. Please be afraid not to follow my instructions to the line, as everything can be easily undone.
Maybe you are looking for
-
Updated modem Internet (section below) DO NOT solved!
My internet provider (Optimum / CableVision) updated the modem cable to a device of 5G. My Base station / Time Capsule has a yellow flashing light; any other WiFi device (2) don't have the problem. Open Airport utility and the Base Station / Time C
-
HP Photosmart Premium C309g-m: HP Solution Center does not work
Improved win7 to Win10 House and it worked all fine until a few weeks ago. Now when I open the HP Solution Center, the drive vibrates for a while, I see HPqdirec.exe (32 bit) process for a second in the Task Manager (not all the time but that could
-
IHAVE older windows xp updated to sp3 through updates, carried out a dischk
I have an old pc with windows xp update to sp3 through updates, played adischk and loss of performance, used my recovery disc that came with pc and revenue to the old xp and now pc will not get online to update questions and so. don't know what to do
-
How to deal with error 80070652 downloading Windows 10
I'm trying to upgrade Windows 7 Professional to Windows 10 but get error 80070652 how clear this to install the upgrade. I'm not a geek, so it should be a simple procedure please. It is a 64-bit operating system
-
I made an accidental purchase. What should I do?
Accidentally, I bought a license for a photo (ADD001145624) when I thought that I was choosing one of ten free images. Can someone help me?[Edited the title to be more clear - MOD]