Msconfig not found or not when installed new win xp installation cd

Similar Questions

• "Extraction failure: cannot open output file" error message when installing new drivers

  Hello, I am trying to install new drivers for my HP Photosmart C4385 printer.  I downloaded the complete drivers of features for Windows XP 32-bit, and when I start to install (extract), I get the error message:

  Extraction failed

  Cannot open output file

  And the process ends.  He arrived at about 85% extraction every time.

  No idea why?  I called HP, but no longer under warranty they wanted money, which I think as absolutely ridiculous - not even give me basic support?  Poor, poor customer service.

  Hi GIJeff12,

  Temporarily disable any AntiVirus/Antispyware software.

  Cut the installer on your desktop then click on the Start Menu, click computer, double-click on the C: drive and paste the installler here.  Now try a right click on the installer for your printer, choose 7-Zip and choose Extract the files, and then click Ok.  If the installation program extracts now correctly, follow these steps.  If it does not extract, let me know.

  Disconnect your printer from the PC.  Restart your PC.

  Open the newly extracted folder and double-click the setup application to start the installation (the installation application will probably have the same icon as the original installation software that you downloaded).  Connect the printer to your computer when you are asked.

  If it was a success, re - enable your security software.

  Best wishes

  DP - K

• Satellite C650D/006: LAN driver not installed in win 7 installation custom

  Hi everyone, I bought a laptop Satellite C650D/006 yesterday from the original owner and he is 5 months old, but I don't like the installation of Windows 7 Home premium 32 bit OEM toshiba so I deleted from the hard drive and installed a complete installation customized windows 7 Edition home premium 32-bit and active with the OEM - COA key on the laptop.

  http://www.MyToshiba.com.au/products/notebooks/satellite/C650D/psc16a-006011/overview#details

  After installation, I noticed that the LAN controller has not been installed in Device Manager so I couldn't of internet connection to run automatic updates of microsoft for win 7,

  I went to the toshiba website and download the driver of network for this laptop and I installed it manually, and after that the laptop has been connected to the internet via an ethernet cable.

  can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.

  see you soon

  > can someone tell me why the LAN Controller software is not installed on this laptop with a custom installation of Windows 7.

  If I understand your message, you have deleted the preinstalled Toshiba OS and installed a clean Win 7 OS in this notebook. Right?
  This means that all drivers must be installed after the installation of Windows.
  In some cases the Win 7 use standard Microsoft drivers that are part of the operating system and some devices may be recognized automatically, but in most cases you will need to install the correct drivers.

  > even my new dell and HP laptops install this driver when I do a custom installation of Windows 7, so why not this laptop.
  Than other cell phones use the same chip as C650 LAN card? I doubt not all laptops use the same LAN chip, which means that different driver must be installed.

• Error code 601.64 when installing new software

  Original title: get an error code of 601.64 when downloading new software on my new laptop HP windows 7

  I recently bought a computer Presario CQ61 HP compaq laptop with windows 7 installed.  Buy HP deskjet all Pro 8500 printer etc. and the installation CD it won't let me download because of my boot operating system.  601.64 code what do I do?

  Hi Paulajwood,

  This could happen if the CD you are using is damaged or non-functional. Follow the link below and download the full feature software and driver and try to install and control what happens.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?LC=en&DLC=en&cc=us&lang=en&product=3752459&

  If you still get the same error message please post back with the exact error message and error code.

  Before installing the drivers, put the computer in a clean boot, and then check what is happening. To put the computer in a clean boot follow the link below

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Once you did with the troubleshooting step 7 follow-up in the same link to put the computer in normal start up.

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't install new programs. Installation window seems to have been lost.

  I can't install new programs. I get a sayijng error message windows setup program cannot be found. I think I might be errased accidentally a dll file when I uninstalled it a pogram and I don't know how to get it back. I do not have a windows disk anc I lost my disc of p of departure.

  To unregister and re-register Windows Installer:
  Click Start and then click Run.
  Type in the Open box: msiexec / unregister, and then click OK.
  Click Start and then click Run.
  Type in the Open box: msiexec/regserver, click OK.
  Type the commands exactly, including the space between c and /.
  This will not affect programs that use Windows Installer that are already installed.

  and/or

  Windows Installer 4.5 is available
  http://support.Microsoft.com/kb/942288

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• I have restore discs, but they are not visible to the E drive when installed says missing Windows Installer

  I am trying to reinstall windows 7 after an accident, now it won't let me use the discs I bought, because windows install doesn't work or is not found?

  Could be a defective DVD. Download the right file .iso Windows 7 version (listed below), use the file .iso image to create a new installation DVD, boot from the DVD and re - install Windows.

  Windows 7. ISO files that includes Service Pack 1
  (Note: must match for your product key version)

  Windows 7 Home Premium 32 Bit: http://msft.digitalrivercontent.net/win/X17-58996.iso
  Windows 7 Home Premium 64-Bit: http://msft.digitalrivercontent.net/win/X17-58997.iso

  Windows 7 Professional 32 bit: http://msft.digitalrivercontent.net/win/X17-59183.iso
  Windows 7 Professional 64-bit: http://msft.digitalrivercontent.net/win/X17-59186.iso

  Windows 7 Ultimate 32 Bit: http://msft.digitalrivercontent.net/win/X17-59463.iso
  Windows 7 Ultimate 64-Bit: http://msft.digitalrivercontent.net/win/X17-59465.iso

  How do I know if I have a version of 32 or 64 Bit of Windows installed on my computer:
  http://Windows.Microsoft.com/en-us/Windows7/find-out-32-or-64-bit

  After downloading the file correct .iso using ImgBurn or ISO gear to burn a bootable DVD.

  Create a Windows 7 Bootable DVD using the. ISO file
  Engraving of a file of Windows 7 ISO on a DVD
  http://support.Microsoft.com/default.aspx/KB/977640

  ImgBurn - in addition to supporting the creation of CD/DVD of. ISO files,
  It supports a wide range of image file formats, and it's free.
  (BIN, CUE, DI, DVD, GI, IMG, MDS, NRG, PDI and ISO)
  http://www.ImgBurn.com/

  Projectiles help you to use ImgBurn to screen: http://www.imgburn.com/index.php?act=screenshots
  Burn the ISO Images with ImgBurn article: http://neosmart.net/wiki/display/G/Burning+ISO+Images+with+ImgBurn
  (Les étapes sont les mêmes pour Windows 7 ou Windows 8), except that you do not create a repair disk but complete an installation DVD)

  Note: Always use high quality DVD + R media and slower burning (4 x or 6 x) speed is offered a choice.

  ====================== Keyless Install ================================

  How to make a 'Keyless Install"of Windows:

  Boot from the Windows 7 DVD disc, you create and launch the installation.

  After entering the username and password you will be asked to: "Enter your Windows product key", do not enter a key.
  Also located right underneath the box where you must enter the key is a box with a check box 'Automatically activate Windows when I'm online', remove the checkbox and click "next".

  You now have a 30-day grace period to activate Windows.

  During this 30-day grace period you can try to solve your problems.
  After you are satisfied with all the problems have been resovled then activate Windows.

  ====================== Device Drivers =================================

  Go to your computer manufacturer's support web site and search for Windows 7 drivers for your specific model number.

  If there are Windows 7 drivers, then to download to a folder on your hard drive and install all of them, starting with the card drivers mother/chipset, SATA, LAN, Audio, USB, graphics, Webcam, Etc., and so on.

  List of computer manufacturer support sites:
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
  Vista: http://windows.microsoft.com/en-US/windows-vista/Tips-for-fixing-common-driver-problems

  Graphics/video drivers:
  Check the download site of the manufacture of the graphics card for the latest Windows 7 drivers for your card.
  ATI: http://support.amd.com/us/gpudownload/Pages/index.aspx
  NVIDIA: http://www.nvidia.com/Download/index5.aspx?lang=en-us

  = How to activate Windows 7 by Internet =.

  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method - to reach a real person:
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Satellite L450D Webcam does not not after installing new free recovery

  Hello

  as published in the title of the thread, I have a problem with the built-in webcam in a laptop client. Two days ago, the operating system of this laptop has been damaged by a virus and had to be put back. I tried to install it with the recovery partition, which did not work. After her, I tried to re - built it with the dvd I burned the partition recovery with the same result.

  The only thing that worked was a clean install with a detail of 64-bit windows 7 dvd and key printed on the sticker of the laptop. I managed to get everything but a part - the webcam works again.

  No driver installation, the update of the bios and the re-installation has worked to get that part to work.

  Someone of you know this problem and have a solution for me?

  Thanks in advance.

  Greetings Saphire

  PS: One thing must be as important. When I look in the Manager of devices installed the driver for the webcam is listed as usb webcam and manufacturer of Microsoft.

  Hello

  Have you tried a last webcam driver released for series such as Satellite L770D for example?

  The driver of the Webcam in the Satellite L770D section has the version 2.0.0.10. It s newer version for L450D
  Maybe you should check this.

  Here is the link
  http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20110404132417.zip

• not sure: the new hard drive installation

  I have a Desktop allows a hard disk which is a failure.  F9 during boot diagnostics say its bad.  I just got the HP recovery disk and I'm not sure that 'when' to instaqll them.  I put the OS on the new hard drive and then first run the recovery or recovery disk?

  If you have the recovery disk set for this PC, run recovery on the new hard drive.  To install everything back like it was new again.  The installation of the OS process is executing the recovery.  Install the new hard drive, and then run the set of recovery disks.

• ACER 5515 will not clean install of Win XP or Vista

  I try to put my fully functional level but slow Acer 5515 to use for video capture (use of astronomy)

  I bought a WD 320 GB Black HD that has been initialized, partitioned, formatted, & using the MBR & NTFS option.

  When you attempt to load Win XP laptop an error indicating that, if a new disc or disk drivers have been installed to remove and search for errors or viruses. The player is reported by tools like healthy WD drive and go the SMART controls on my desktop system. The drive is reported when the BIOS loading but does not seem to work after that. Is this a common problem? are there tricks to get the loaded operating system?

  I tried to load win Vista and only got a little further until the system locked up during the completion of the installation, this has happened 3 times.

  The solution to my problem was a hammer book ten...

  Seriously if I had to put the SATA IDE mode, native AHCI vice (tip published in one of the many how to load XP threads) place after everything went well.

  I have now a CLEAN install on a HARD drive bigger, more fast and none of the indigestion of plant to slow down the system.

• Error (s) found: Code 800072EFE when installing an update

  Original title: KB71644 32-bit platform update

  Hey, I tried to download the update for my laptop, and whenever I did, it says: "error (s) found: Code 800072EFE.» And every time I ask for help, it has nothing to do with this code.
  So I decided to install the update myself on the internet, but I can't find anything, and when I do. That's all for the 64-bit platform. I can't use these that I am using the 32-bit platform. Could someone help me with this please?
  Thank you very much

  And I do not get updated in my Windows Update program.

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/87f54f1a-1175-4c63-8838-7a56b9f3f3b6 >

  05/26 / 1111:59: 14 am

• BSOD when installing new OS

  I have a new MSi GT683 notebook. And I tried to install Windows 7 Professional SP1 version debugged/checked version last night. And after that window is unloaded the files, I get a blue screen. Could this be because I installed the wrong operating system. So why recently I also asked how to get another. I'm downloading a Win7 Pro SP1 x 64 normal version (as long as the key to debugging works). This might work? I never really had any problems with the installation of the system of front... This is the first time. It is also the first time I tried to install version debugged for a new laptop.

  Thanks in advance for the help!

  I have a new MSi GT683 notebook. And I tried to install Windows 7 Professional SP1 version debugged/checked version last night. And after that window is unloaded the files, I get a blue screen. Could this be because I installed the wrong operating system. So why recently I also asked how to get another. I'm downloading a Win7 Pro SP1 x 64 normal version (as long as the key to debugging works). This might work? I never really had any problems with the installation of the system of front... This is the first time. It is also the first time I tried to install version debugged for a new laptop.

  Thanks in advance for the help!

  Hello

  The of Windows Debug/Checked build is used by developers to test their new software or drivers. Checked versions are not software at retail. Before you download versions, please see the bulletin.

  The free version (or the commercial version)
  The free version of Microsoft Windows is used in production environments. The free version of the operating system is built with the complete compiler optimizations. When the free version detects correctable problems, it continues to operate.

  The controlled version (or the debug version)
  The version of Microsoft Windows allows to identify and diagnose the easiest operating-system-level problems.

  Differences in Build checked and free:
  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff543450 (v = vs. 85) .aspx

  I don't know if the product key for the version debug/checked will work with the retail version.

  Concerning

• G72 laptop freezes when installing new software cd/dvd

  Laptop G72 girl. Memory of 3g with Win7 and a lot of hard disk space. all updates current. scanned and defragmented hard drive. When I try to download or install from the software cd that is fab dvd, Nero, etc. (copy software), his cell phone freezes and I have to restart the system and uninstalling the software for device working again. any suggestions as to why this type of software causing conflicts - thx a lot!

  Hello

  In the Menu start, open the all programs, open accessories, right-click on command prompt and select "run as Administrator".  In at the prompt, type the following command and press ENTER.

  sfc/scannow                (Note that there is a space between sfc and /)

  Let the entire process, then the output type and press ENTER.

  Then, click on the Start Menu, click computer, left click Local disk C once to highlight, right-click Local disk C and select Properties.  Click the Tools tab and then click on the button "check the drive for errors.  In the next window make sure that both boxes are checked, then click Start.  A part of this process will require a reboot to check the disk.

  Kind regards

  DP - K

• fatal error when installing master collection '[FATAL] installation - installation package error C:\Users\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx. Returns the value of pim_installPackage = - 1

  Hello

  When I try to install a trial like photoshop cs6 or master collection cs6 product, I get the error "Installer has not initialized. I used Adobe cleaner to remove all products cs6 and tried again, but no luck, same error.

  I opened the log file and find this line:

  [FATAL] Setup error - installation package C:\Users\moshe-a\Desktop\MasterCollection_CS6_LS6\packages\core\PDApp.pimx.

  Returns the value of pim_installPackage = - 1

  No idea how to fix?

  Thank you, Momu

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• Install new win 7 pro and update is screwed

  Hello

  Had to reinstall a PC users.  Disc nine - same copy of win 7 pro... in fact, it is activated, but the beast will NOT run updates.

  I get the 807000E error and I ran the store and fix the useless mr wizzard... There is NO lang Pack installed.

  Now, I get the error 80244019... and of course, when I use "get help with this error", I get bupkis! "

  Any suggestions?

  Cheers

  Dave

  Try this:

  Go to Registry Editor: start - regedit and find the following key: HKLM\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdatemake a backup of this registry key and delete the key with its subkeys.

  After you go to services (Start - Configuration - Services - system) to delete and restart the Windows Update service.

• Recovery work after the fresh install of Win 7?

  My toshiba provided with Win7 Home Premium.
  I had a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?
  Which means that I would not be able to go back to win7 HP as a factory reset?

  Is it possible to recreate the previous boot sector?

  Thank you

  Hello

  > I got a win7 pro geuine copy work and if I sintall on the C partition I'll lose the boot partitions for recovery-related sector?

  Unfortunately, Yes.

  The new Win 7 installation would be to remove the early boot manager, which means that you would not be able to choose the option of HARD drive recovery.
  I highly recommend creating a Toshiba Recovery disk before you install or change Win 7