msvcp120.dll missing file

Similar Questions

• XMPP.dll missing file

  At the start, my computer still comes with XMPP.dll missing file.  I looked online and can see sites where I can download this file, but I fear that they are reputable or not so eager to ask advice on which are safe.  I don't know if it's related, but my computer is running very slowly and it is very frustrating.  I know how to run disk defrag etc but none of this makes much difference to performance.

  Hello

  You did changes to the computer before the show?

  Method 1:
  Step 1: you can check if the problem occurs in safe mode.
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222
  Step 2 the question don't occur in safe mode, and then perform a clean boot and check.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.

  Method 2:

  Try the SFC (System File Checker) scan on the computer.
  For more information, see the article:
   
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Method 3:

  Alternatively, you can run a Microsoft security scanner to make sure that the computer is free of infection by the virus:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted

• msdvcp110.dll missing file error

  msdvcp110.dll missing file error

  I'm done with the installation of c ++ redistribution and everything but does not work for ultimate express

  Original title: installation of visual studio 2012 on windows 8

  Hi Mike,.

  Thanks for posting your query in Microsoft Community.

  The error you get can be caused by components from Visual C++ Runtime libraries that are missing or get conflicted, perhaps due to a third party software or badly configured registry settings.

  So, I would suggest trying the following steps and check if the problem persists:

  Method 1:

  I suggest to install the Visual C++ Redistributable package in the system to boot and try to run the applications:

  Step 1: Clean boot of the system.

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  How to perform a clean boot in Windows

  Note: refer to "How to reset the computer to start normally after a boot minimum troubleshooting" to reset the computer to start as usual after a repair.

  Step 2: Download the Microsoft Visual C++ 2013 and install.

  Click on the link below and install it on your computer.

  Package redistributable Visual C++ to Visual Studio 2013

  If she fails to install and then try to install the Package redistributable Visual C++ 2010 in compatibility mode. Follow the steps in the link given below to install Visual C++ 2010 redistributable Packages in compatibility mode. Please see the following article:

  Make the programs more compatible with this version of Windows

  If the problem persists, try the following method.

  Method 2:

  Try to run a scan of the file system (CFS) auditor to check corruption of system files in the system. SFC scan will search for system files corrupted on the computer and fix them.

  1. Press the Windows key + X, click prompt (Admin).
  2. In the command prompt, type the following command and press ENTER:
     sfc/scannow

  For more information, refer to this link:

  Use the System File Checker tool to repair missing or corrupted system files

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• D3dx9_37.dll missing file

  I installed a game from a purchased CD my child and he told me I was missing a file d3dx9_37.dll.   How can I download this file safely without having to buy some sort of scan registry?  Thanks for your help

  Hello Susan:

  It is a DirectX .dll file.  I would suggest that you simply download the latest version of DirectX from http://msdn.microsoft.com/en-us/directx/aa937788.aspx and reinstall.  If that doesn't work, see the article database online at http://support.microsoft.com/kb/910813 and see if the steps include that it help.

  Let me know if it works.

  Justin

• Mfc30.dll missing file

  I have an old program, Edmark thought ' things 1 (for windows 95) that I would install on my computer with XP, but it says miss me the file mfc30.dll you know where I can get a copy of the file security

  I got a stop a CD of Windows 95 and downloaded the compressed version (mfc30.dl_) and an enhanced version (mfc30.dll) on my SkyDrive (everyone has a SkyDrive for file sharing).

  I don't know where to go or what you do with it - perhaps put it in the c:\windows\system32 folder, or XP can give you a clue in the message of the complainant.

  Here is the link to my SkyDrive and you can find the files you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called mfc30 in the when the filename should really be called mfc30.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You must really know us if that helps!

• c:\windows\system32\d11872t14.dll missing file

  Original title: c:\windows\system32\d11872t14.dll

  I got a message saying that this file is missing: c:\windows\system32\d11872t14.dll. . How can I get that back?

  It confuses me again why the MS Answers forum does not prompt for any information system when a new question is asked because we don't know anything on your system.

  You see only this message when you start your system and then good, things work or come to the top when you do certain things and if so, what do you do when you see?

  I did a Google search on this DLL and did not get any results (except your message), which makes the suspicious file.

  If you see the message when you restart your system and then things work very well after that (for example, after clicking OK), I think I do it in this direction:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• System32/jiwofehu.dll missing file

  I get a warning window:

  Windows/System32/jiwofehu.dll is missing

  If you do a Google search on the name of the files, I think that each result that comes up says it's a kind of malicious software.

  It looks like a startup lettover item of perhaps a few other malwares that removed the suspect left but left the start-up input.  (This is common).

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware software follow these steps:

  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.

  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.

  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.

  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.

  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely
  .  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry later.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.

• AVG 2011 - msvcp80.dll missing file

  Since the upgrade AVG 2011 free ediion when I start and it's loading AVG to get the message.

  Cannot start as long as MSVCP80.dll file missing.

  In fact, my computer isn't the only one, my husband did the same and the laptop. 3 in all.

  However, my husband plays WOW and was looking through his WOW files and found this file here & thought he should be on average so he copied in the AVG folder in programs - but it made no difference.

  Can I get this file Windows or AVG?

  If Windows, where do you get it out?

  Get rid of the Zone Alarm Toolbar - even if you have disabled and never used.

  This works.

• magcore.dll missing files

  MagCore.dll error message keeps popping up whenever I turn on my computer. Please mail me the link to fix the problem.

  MagCore.dll error message keeps popping up whenever I turn on my computer. Please mail me the link to fix the problem.

  Maybe a third party/malware software tampered with startup items...

    (1) if there is everything about the .dll u you described here, to the start system tray turn off...
  http://www.howtogeek.com/74523/how-to-disable-startup-programs-in-Windows/

  or

  try to use "Autoruns for Windows" and check if there is that a boot associated .dll u entry you have described and if so delete...
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  or

  You can use regedit... Press windows R, type regedit and click ok... (before you edit it, export the key you are going to change or remove)
  then navigate to these paths...

  [HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionRun]

  [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Run]

  then look for the .dill file you have described here and delete this key... RESET

• STFiles.dll missing file

  Hello. I have Hp Pavilion dv6-6c04et laptop. I installed win8 to my pc, but not all drivers compatible with it. so now I want to reinstall win7 I don't have win7 cd even though I bought win7. How can I solve this problem. How can you help me?

  Hello

  There are two options available.

  1. you can order a set of replacement recovery disks using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 another option that you might consider is to create your own Windows 7 installation disc.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( this must be the same version that originally came with your laptop - it is listed as Windows 7 Home Premium 64 - bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  The source of the Image is Digital River.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need, additional drivers and software are here.

  Best regards

  DP - K

• file MSVCR80.dll missing

  I have a 2010 H/P laptop model G72-227WMnotebookPC (actually it is my wife) she recently updated java 6 java 7 and was one of the instructions to remove java 6 from his computer that has been done, now iTunes opens not secondary to a missing MSVCR80.dll file.  I tried to re-instrall iTunes without success (I keep getting the error message about the missing dll file) despite all the suggestions in the section of troubleshooting by train.  H E L P!

  R.,

  Welcome to the HP laptop computer Forum discussion Forum.

  Apparently, you're not the only one to whom this happened.

  I found a solution by the people of PCSupport who treats the missing file and in particular, when the problem is associated with iTunes.

  How to fix Msvcr80.dll not found or missing errors

  Click on the star of congratulations !

  It's a nice way of saying 'Thank you' for help.

  Although I strive to reflect best practices of HP, I do not work for HP.

• RealPlayer does not open due to missing file MSVCP90.dll

  I try to open realplayer and every time I get the same error message: Realplayer does not open due to missing file MSVCP90.dll. I tried to uninstall and reinstall a clean version and it's the same result every time! What I am doing wrong? How can I solve this problem? I have a laptop HP 1030NR which uses xp edition sp3 family. Can anyone offer any suggestions?

  The problem is that RealPlayer needs pieces of Visual Studio/Visual C++ libraries and that is not finding them on your system.  You do not have to install all this junk - just distribution (like MSVCP90.dll) files.

  You can look in Add/Remove programs and see what Microsoft Visual C++ redistributes you have installed right now (you can have none).  I installed them in 2005.  You may have none or more installed.

  I would like to download the latest Package Microsoft Visual C++ 2010 redistributable and install it from here:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=5555

  Reboot and see if RealPlayer is happy now.

• Get the error message about the file cCNColms.dll missing at startup.

  I get the missing file from cCNColms to C:\windows\when dll I start and after connection as I administer. Can't find any help on the internet. I did a fixboot and have done several analyses. A fixmbr command showed that corruption but a fix can damage the disk partitions. Anyone have any suggestions? Thank you

  Using a Google search, I do not met that DLL and it has a special name, and is in the c:\windows folder so it sounds suspicious to me.  I would say that your system is perhaps currently or has been infected by malware.

  Because the MS Answers forum asks you to zero information on your system when a new question is asked, we know absolutely nothing about your system - and I would skip trying things.

  Read these instructions carefully and see what you can find:

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.
  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry. There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding
  .  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information
  .  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can simply disable, restart and if the problem is resolved and then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that you had or have an infection, followed with this:
  Perform scans for malware, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• How can I fix a missing the MSVCP71d.DLL DDL file

  How can I fix a missing the MSVCP71d.DLL DDL file

  Hi GaryYS,

  Thanks for posting in the Microsoft Community.

  I'm sorry to know that you are facing a problem to install Maxim DL of Diffraction Limited.

  As you receive error message missing MSVCP71d.DLL, it would be useful if you can answer this question to help you further.

  1. when exactly you receive this error message?

  2 did you a recent software or hardware changes to the system?

  Msvct71.dll is a Microsoft C Runtime Library and it is necessary for the performance of several Microsoft and non-Microsoft applications on a Windows System.

  You try to run a SFC scan to check all corrupted files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  If you need further assistance, please answer and we will be happy to help you.

• file dll missing after reboot.

  I'm having a problem with a particular .dll file disappear after a reboot.

  The problem occurs on 2 PC - one running Win7 Home Pro 64-bit, the other Vista Home Basic 32 bit.

  Problem started on 21 September after Superantispyware (SAS) has identified two Google Earth files as being infected by a Trojan and deleted files. After a lot of checking, it seems that it was a false positive.  After controls substanitial for infections (I run Norton 360) I rebooted Google Earth (GE) on both PC and the program worked fine, however after I restarted the PC, GE could not run and an error message indicating that the files were missing. I went through several cycles of reloading GE; GE works well; restart; GE fails with the same missing .dll files.

  Missing files on Win 7 PC are:-
  c:/Program Files (X 86) / Google/Google Earth/client/igexportcommon.dll
  c:/Program Files (X 86) / Google/Google Earth/plugin/igexportcommon.dll

  I got a work around that I saved the file (IGEXPORTCOMMON. (DLL) to a different folder and can get GE working by manually copying the file in its working files, but would like to get GW working properly again.

  I have scan system - but it is "no breach of integrity".

  Have these files become somehow marked to not recharge after a reboot?

  Any help appreciated.

  You are now able to score the answer?