MSXml 4.0 SP3 & Windows 7 64 bit

Similar Questions

• Error with MSXML 4.0 in Windows 7 (64-bit)

  Hello

  I'm having a problem with MSXML. I'm running on a Windows 7 Ultimate 64 bit. I am launching a game called 'Age of Empires 3 '.

  I installed twice, and I get the same problem "MSXML 4.0 is not installed correctly, the program needs to run".

  My version of MSXML is 4.20 and it says I haveSP2 MSXML as what the details of the file show.

  I downloaded "MSXML 4.0 SP3 " and "MSXML 4.0 SP2 " of http://support.microsoft.com/kb/973685/ here

  and it gives me this error when I open these files

  "Error opening installation log file. Verify that the specified log file location exists and is writable. »

  I also went here http://support.microsoft.com/kb/810209 and I also have an error then

  Method3: extract and save XML files Step 1: extract the file
  (It worked without problem)

  Step 2: Save files

  1. click on Start and then clickrun .

  2. in the run box, type regsvr32 MSXML4.dll, and then click OK .

  After clicking on OK , I get an error and the error reads

  "Module"MSXML4.dll"may not compatible with the version of Windows that you are running."

  Check if the module is compatible with a version 86(32bit) or regsvr32.exe 64(64bit) x x ».

  Anyone know how I can get this fixed a problem?

  PS: can I play Flight Simulator X very well without any problem and if I'm not mistaken both games require MSXL 4.0.

  Any help would be greatly appreciated.

  Thanks for your help and your time.

  Hi, level,

  I suggest that you try the steps in the Microsoft article in the mentioned average lower.

  Method 1

  (a) visit the following Microsoft Web site:

  (b) http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-C5D7485F2B42 & displaylang = in (http://www.microsoft.com/downloads/details.aspx?familyid=3144B72B-B4F2-46DA-B4B6-C5D7485F2B42 & displaylang = en)

  (c) scroll to the bottom of the page.

  (d) locate and download the following files:

  ·         MSXML.msi

  ·         Msxmlcab.exe

  Note Save the files downloaded to the desktop.

  (e) when the download is complete, double-click Msxml.msi and then follow the instructions on your screen.

  (f) restart the computer when you are prompted.

  Method 2 Extract the files

  To extract the files, follow these steps:

  (a) double-click the Mxmlcab.exe file that you download in method 1.

  (b) create a new folder on the desktop.

  (c) when you are prompted, select the folder that you created in the step above as the location for the extracted file. Then, clickOK.

  Method 3 Save the files

  To save the files, follow these steps:

  (a) click the Start button.

  (b) in the search box, type command prompt.

  (c) in the list of results, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  (d) by default the location in the command line would be inc:\windows\system32

  (e) type cd... Press enter

  (f) type cd... Press enter

  (g) now, it would be to c:\ now type cd c:\users\\desktop\

  (h) now its c:\users\\desktop\ now, type regsvr32 MSXML4.dll and then click OK.

  Note You should receive the following message is displayed:

  DllRegisterServer in successful msxml4.dll.

  (i) click OK.

  Check now if you run the game.

  Method 4

  If the steps above fail then I suggest that you try to execute the MSXML 4.0 Service Pack 2 (Microsoft XML Core Services) and the game installed in compatible mode and check if it works.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• MSXML 4.0 sp3 will not install on windows vista 32-bit

  I am owner of a HTC Desire HD and as part of the package with the HTC sync software they require MSXML 4.0 SP3 must be installed. Setup extracts and installs until the 'product information' then he told me that an error occurred while installing (well words to that effect). Then I tried to download the software directly from yourself and the same failure occurs. Any ideas how to solve my problem? Thank you

  Hello

  I suggest that you follow the steps mentioned below and check if that helps.

  Step 1:

  I suggest you to check if the Windows Installer Service runs in the Services.msc window.
   
  a. Click Start; In the start search, type Services.msc and press to enter.
  b. right-click on Windows Installer and click on Start (only if the Service is stopped).

  Step 2:

  Put your computer in a clean boot State, and are trying to install. Start your computer in a clean boot state helps determine if third-party applications or startup items are causing the problem.

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Step 3:

  Also follow the steps in the article.

  You cannot install some programs or updates

• Installation of the latest SP3 on the environment of SharePoint 2007 windows 2003 (32 bit) farm is a failure, need immediate help

  I tried to solve installation SP3.0 in sharing environment point 2007 windows 2003 32-bit, but not able to succeed. I get the following errors, please make a ticket for this problem.

  Product: Microsoft Windows SharePoint Services 3.0 - error 1401.Setup failed to create the UNKNOWN\Components\6DB2163C29DACA44A84BDF952B517880\00002109410100000000000000F01FEC registry key. Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help. For more information about how to contact PSS, seePSS10R.CHM.

  Please help me

  Thank you

  Karuna

  Hello

  I suggest you to send the same Sharepoint forums to improve the assistance.

  http://social.msdn.Microsoft.com/forums/en/category/SharePoint/

  Thank you!

• Applications that use msxml do not load or use Windows 7 64-bit environment

  What happened several times. I have an installed application (Quickbooks pro 2010) that uses MSXML, and when I installed another application that uses MSXML, it fails to install, or install but does not work properly. (Both applications are supposed to be compatible with Windows 7)

  Is this a known issue?

  Hi Emanders,

  You receive an error message when you try to install or run programs?

  Who is the other program that fails to install or load?

  Access the link below and check if the programs are compatible with Windows 7 64 bit.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  However, you can try to unregister and reregister the MSXML.dll files on your computer and check if you can install and run programs.

  Run the command at the elevated command prompt, follow these steps:

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML4. DLL/U
  REGSVR32 MSXML4. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  You can also open the event viewer and check if there are other important messages/error codes that is generated during installation or execution of the program and after return.

  See the link below for more details:

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows update does not; try to upgrade to win xp sp3 x 86 32 bit

  I HAD TO RESTORE MY SYSTEM. TRYING TO USE; "WINDOWS UPDATE" IT RESEARCH, THEN IT SAYS IT CAN'T RUN UPDATES!  I CREATED AUTO UPDATES SYSTEM, TRYING TO UPDATE TO SERVICE PACK 3 FOR WINDOWS XP 32-BIT X 86. THX JEFF

  http://www.taurarian.MVPs.org/WU_XP/0x80240036_0x8024400A.html

  You must be at Service Pack 3 level before you can use Windows updates.

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:

  winver

  A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  See also: http://support.microsoft.com/kb/2497281
  You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  SP2 - http://www.microsoft.com/en-us/download/details.aspx?id=28
  (for single PCs too)

  For Windows XP Service Pack 2 installation procedure
  http://support.Microsoft.com/kb/875364

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

  It is stated in "How to obtain the latest service pack XP" is.

  If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:

  Download the Windows XP Service Pack 3 package now

• I have a windows xp 32-bit sp3 and a 3CRUSB10075 com 3, which will not recognise wpa2-psk

  I havea PC with Windows XP 32-bit SP3 and my 3CRUSB10075 Wireless will not connect to my modem that has wpa2-psk, it does not even as an option

  I would hazard a guess that this particular wireless does not support this type of encryption. You should check your documentation and should confirm. You have no other choice than to set your router to a supported type.

  I hope this helps.

• I want to migrate to windows 7 64 bit now all programs on my current windows xp 32-bit sp3?

  I want to migrate to windows 7 64 bit keep all programs and definition / references of the on my current windows xp 32-bit sp3?

  I want to migrate to windows 7 64 bit keep all programs and definition / references of the on my current windows xp 32-bit sp3?

  Is not possible.

• I have win 98se, win xp sp3 and Windows vista 64 bit, I want to share printer files

  I have win 98se, win xp sp3 and Windows vista 64-bit PCs, and I want to share files & printer... printer is connect in xp or 98se, well, what is possible... currently, I've got these between vista and xp, which is available when win 98se involved?

  Two ways are participatory computers in a windows environment, a working group and a _.   You can fill in the blank?

  Virtual private networks have little to do with the domains or working groups.

  I don't think that WIndows 98 can join to a domain.  All versions of WIndows, you mention should be able to participate in a working group, however.

  In my opinion, the best way to share a printer is to use a printer connected to the network

• Can not install MSXML on a Windows 7 64 bit. Help, please!

  • 
    
  • On a Windows 7 64 bit (new installation), I can not install MXSML. I get an error HKEY_LOCAL_MACHINE32\Software\Mxsml2.DOMDocument.4.0\CLSID
  • I am the only user on this computer and I have rights to admin (checked and double-checked). I can not install some software because it bogged down at this stage. Currently, no version of MSXML is installed on my system. Help, please! It is a self-built system using ASUS P6T Deluxe v2 motherboard. Everything else seems to work very well.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• During the installation of MSXML 4.0 SP3 for age of mythology, I get "an error has occurred in the installation of assembly component"

  When I was younger, and I wanted to play again for some reason, I've played the game age of Mythology. I spent some time making the installer to make it work, then I tried to play the game. As the intro to fantasy has been done and the main menu was about to appear... The game crashed and he said I need MSXML 4.0. After spending 2 hours to do the work of the installer, I was a little upset that I had to fix something else. I downloaded the MSXML 4.0 SP3 because he said it was a compatible with windows 7. I ran the installer and it gave me an error like this:

  "An error occurred during the installation of assembly component"

  {74974F83-779E-3983-A06B-D6B9ABF34537}

  HRESULT: 0 X 80070003

  I tried for about 4 hours on forums like this, but nothing has worked. I looked around my computer and I can't find anything on MSXML. One thing that I suspect me, is that I got my computer wiped out about 6 months ago. I don't know this only erased. I have a Windows 7 64 bit Home Premium.

  I spent so much time for a game that has been a joy to play, you can help me find a solution.

  Original title: MSXML 4.0 SP3 'an error occurred during the installation of assembly component.

  Hello

  Thanks again for your response.

  Please refer to the suggestions of Halima S replied on 28 October 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/error-with-MSXML-40-in-Windows-7-64bit/19afaa80-6c5f-459e-9C0D-0aa5887bcd34

  I hope this information helps you.

  Thank you

• Windows XP 32-bit on dv4-1117nr installation

  I am trying to install Windows XP 32-bit on dv4-1117nr, who initially installed Windows Vista 64-bit.

  However, whenever I start using the XP installation CD, it shows the Blue error screen and asks me to restart.

  Is there something wrong in the process?

  Thanks in advance.

  These instructions are from the user "answertome".

  The video is in Italian, but just pay attention to the screen, I was able to follow the instructions and make it work.

  Like the previous user said, you will need to format your hard drive, all first as well.

  first of all, you must have a regular o XP Professional licence. Vista Home is not inlcude the right to downgrade to XP.

  When you have your XP CD, if you try to install youi will have a screen of wheat with the code error: ERROR STOP 0xX0000007B. This because the Microsoft XP CD is missing from the AHCI driver for the SATA drive controller.

  You must add the AHCI driver on the XP cd using nlite software.

  the steps you need to do are:

  (1) download and install Nlite from site nliteos.com web

  (2) downlaod driver AHCI from HP ftp://ftp.hp.com/pub/softpaq/sp39501-40000/sp39786.exe

  (3) If you don't know how to use nlite, just look at the little clip that you can find here http://www.filecloud.com/files/category.php?user_category_id=283210

  You can see 2 clips:

  (1) add SATA driver by controller ICH9 (intel Montevina) .avi-> This shows how to add only the driver AHCI (a few words in Italian)

  2) integrareSP3_e_SATA_AHCI_finale_con_audio_e_logo2.avi--> This shows how to add the SP3 and the driver AHCI (audio in Italian, but you can understand it enough to see the video)

  When you have your new CD with SATA/AHCI driver, you will be able to install XP on your laptop

  Ciao

  Answertome

• Does anyone have SOF2 still run on windows 7 64 bit? __

  Here are the steps I've taken so far.

  Updated all the Nvidia drivers for my 9800 GTX +.
  Install Direct X 9 c - hoped this would help with OpenGl
  Configure the program to run as admin.
  Set the program to run in Windows XP SP2
  Set the program to run in Windows XP SP3

  When I start the program it's what I get Windows 7 64 bit
  Deal with the accident of application SOF2MP.exe
  Could not load SOF2MP.exe

  Sof2 ran when I had Vista Ultimate 64-bit.

  The game I was talking about is Soldier of Fortune 2 Double Helix soldier of fortune recovery not.

  I did the recommended settings and it help out but I can not load the game.

  I tried to install Direct x 9 c but I don.t think it worked. That's what the game initially provided with.

• MSXML 4.0 sp3 not continue beyond information customer step

  I am under Win2k8 SP2 (32 bit) in a virtual machine and I am unable to install msxml 4.0 sp3. When I try and skip the step where the information about subscribers is collected, I get a message box stating that I have to wait, it determines disk space requirements.

  Any ideas how I can get past this stage?

  Edit: I tried the two msxml 4.0 sp2 and sp3. I also tried reboot and run Setup as an administrator.

  Hello

  I suggest that you post the question on the link provided below for assistance.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• Cannot install on my windows 7 64 bit paraworld

  I can't install paraworld on my windows 7 64 bit for some reason any. He used to work properly on my windows vista computer, but it does not work properly now. It installs successfully but will not start. Windows says something about the old drivers, but it didn't complain about what I couldn't do with. Help, please

  Try installing the latest drivers for your video card. Also, try right-click on shortcut set, select 'Properties' and then go to the 'compatibility' tab check "Run this program in compatibility mode", and then select Windows Vista or Windows XP SP3. Microsoft Student Partner