MU computer stops immediately after the start-up or attempts repeated; So sometimes minutes after;

Similar Questions

• HP Envy 15-j119so: Envy 15-j119so stops immediately after starting

  My 7 month specifications stops immediately after startup. Briefly, it shows the start screen with the message "to initiate the automatic repair" before to stop completely. The laptop is brand new and I have not experienced problems before today.

  Would it be a virus or a motherboard problem? In any case, if you can help, let me know!

  Thanks in advance.

  Sounds like a hard drive problem possible. Have you tested with the F2 System Diagnostics? Immediately after switching on at startup by pressing the ESC key. A menu opens where F2 is an option. Press F2.

  You are still under warranty. HP support a call.

  If you live in the United States / CA, coordinated HP here.

• I installed the software after installation my computer restarts automatically at the start with on screen start

  I installed the software after installation my computer restarts automatically at the start with on screen start

  Hello

  ·         Do you have what software installed?

  ·         You get the error message?

  Step 1: Try the following steps to disable the automatic restart in case of system error:

  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  (b) select turn off automatic system failure reboot when the Windows Advanced Options menu appears, and press ENTER.

  (c) Please provide the error if you get one.

  Step 2: Check if you are able to start the computer in safe mode.

  A description of the options to start in Windows XP Mode: http://support.microsoft.com/kb/315222

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• computer disconnects immediately after connecting

  my computer disconnects immediately after connecting. He did also thisin safe mode, no idea how fix

  Reconnect to your Windows XP work.
  Go to Start -> Run -> type regedit ->OK -> Regedit should start.
  On the left side, click on HKEY_LOCAL_MACHINE
  In the Menu , go to file -> load the hive
  Find the file C:\Windows\System32\Config\Software -> clickOpen
  Type a key TEST name-> click OK
  Now, on the left, go to the HKEY_LOCAL_MACHINE\TEST\Microsoft\Windows NT\CurrentVersion\Winlogon
  Once you have clicked on Winlogon, values will appear on the right side.
  Search
  Shell    REG_SZ Explorer.exe
  UIHost    REG_EXPAND_SZ logonui.exe
  USERINIT    REG_SZ be C:\Windows\System32\userinit.exe (preferred) OR just userinit.exe
  If the data are not the same then double click on the registry value (Shell, Userinit, UIHost)
  a screen opens where you can insert the data from the correct value.
  Once all 3 of these registry values are the same as above, then on the left side once more go up and click on
  HKEY_LOCAL_MACHINE\TEST
  Then in the menu, click on file -> unload the hive -> clickYES to confirm the unloading of the TEST hive.
  Quit Regedit, restart the PC and try again.
  If you are unsure of any of the procedures above, please let us know.

• iPhoto will stop immediately after launch

  My iPhoto stops immediately after the launch.  It seems that if I can still import the photos but the app I cannot view or navigate the library, because it stops and gives me an error message.

  Help, please

  iPhoto v9 on 10.8.5?

  A lot of older versions of iPhoto 11 this meet right now:

  Huxly647 discovered this fix

  1 goto /Applications/iPhoto.app/Contents/Resources

  2 delete the files 'googlemap.html' and googlesearch.html

  IPhoto no longer crashes, site does not work, but it doesn't bother me too much.

• Canon 5 d MK IV LiveView stops immediately after having been pressed with Tamron SP 70-200mm F/2.8

  My Canon 5 d MK IV Live View will stop immediately after having been pressed with a Tamron SP 70-200 F/2.8 Di lenses.

  I don't see the problem happens with my lens F / 2.8 Canon 24-70mm.

  This problem happened in video mode.

  I hope that there is a setting I have to toggle to make this objective work in Live View mode?

  Thank you

  Mark

  I spoke to my local camera shop, they said, that it should be referred to the Tamron for the update of the firmware, they said, that Tamron has a fairly good hand around time of approximately 5 days. I've probably will send mine once I'm done with a shoot.

  The lens works very well for me, normally, the only problem for me is Live View. If this is not the case, use the LIve View, it seems to work great so it's not paralyze me right now, but it would be nice to just get it fixed if Live View will work.

  The camera is also on Firmware V1.01 so their will be updates firmware for it also and as a previous post said that Canon will also address the issues with 3rd party lenses. Great! After that all the Canon doesn't want people who have glasses of third parties avoiding the body of the camera for this problem. It's logical Canon would solve this problem.

  So far it is a minor bump with third party lenses. I've always been able to work with my Tamron and Sigma lenses. Just a couple of workarounds until the firmware is updated. It isn't a deal breaker for me. This camera is a pleasure to shoot with and I am very pleased with the Canon has advanced in the development, image quality with the dynamic range and low light performance. I am happy and have no regrets.

  I would still recommend this camera to a friend.

• Windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu

  Hello world

  I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.
  I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.

  I would be very grateful if you could help me

  Hello

  I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.

  Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know the results. We will be happy to help you further.

• HP10 1901 Tablet: Tablet 10 1901 hp stops immediately after the start, despite the load fully

  Hello

  My hp 10 Tablet has less than two years, and I don't use much.  The problem started with the volume suddenly down to zero out of control, and even if I press the volume up button, the volume is just down once again, when I let the button.  And then the Tablet has started to close automatically, even when it has a lot of power left, as more than 50%.  Now, even if I have fully charged, when I press the power, immediately after the start, it says, 'stop' and he just stops.  I try to turn it on again, and the same story is repeated.  I'm just fet upward.  What is a mechanical problem or a software problem?  I don't understand.  Please help me.

  Hello and welcome to the HP support community!

  It is difficult on this side of the screen of remote diagnosis your problems!

  You should try to eliminate the causes of the problem.  Only thing we recommend is to first try a Factory Reset.  It recharges a clean copy of the OS.  If she solves problems, then you're done!

  If problems persist or get worse, then it is probably related to the material.  Damaged the volume button, USB port, due to lack of battery, etc.

  Perform a factory reset on your tablet.

  WyreNut

• Newly installed adobe reader stops immediately after the opening

  I just installed Adobe Reader (on a Windows 7 computer), but I tried to open it it starts and stops immediately. I have another PDF generator that came with the computer (Stat Nova PDF) which could interfere with Adobe reader.

  Works with Adobe reader installed or PDF software.

  Is there a setting to make Adobe default PDF reader?

  I can't risk to uninstall the software original PDF (Stat Nova PDF), it must be for a rush job and can't risk have no functional PDF reader at all.

  Thanks for your help

  First thing to try: go to C:\Program Files (x 86) \Adobe\Reader 11.0\Reader and Eula.exe execution, and then click I accept.

• HP DV6 of the computer stopped working after the update of the Bios and Memoryupgrade

  HP DV6 - 3161EO

  XE068EA #UUW

  Hi, I bought a brand new HP with Intel I5 processor computer and GUI double, its been working well so far and I thought that I should upgrade the Bios and memory as well.

  So I did, I bought memory 10600 and crusial 12600 and corsair, a single and two put in correspondence of the sticks, just to be in business, and I've updated the bios. of F.13 to F.29

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=SV&CC=se&DLC=SV&sw_lang=&product=4344...

  The computer worked perfectly for about 4-5 hours, then there are allmost quite dead.

  Ive tried to pass on different memorycabsm like the original samsungs that came with the computer.

  Ive tried the famous "hard reset".

  Nothing, the computer starts "boots" but don't approach the entered message turnes off.

  Presedure same each time.

  Any memory I put in, the same result.

  Ive used different powerbricks, turned of the computer resets hard, between 10s 2 min, picked up the bios battery, has offered free energy.

  Let the rest of the computer for half a day, put it all together exept cmos battery = exactly the same as before.

  "take out all the memories and the computer works and get that caps lock flashing light.

  So my question is this

  Why you encourage people to update, when it's clearly the fault at hand.

  Sell your computers with 8 GB of ram from the beginning so the people do not have upgraded later because your hardware is not able to manage different memorycaps of accepted and authorized as crusial or corsair providers.

  Ive built perhaps 50-60 computers and had about 10 laptops and NEVER had a fault like this.

  My laptop $1200 is useless, and I actually held you at HP responsible of it.

  The computer is of course out of warranty, so its my own falult, as usual.

  «A simple question, is there a way to 'force' a new bios on the Board, without memory of the computer, because it is the only time where it works and works welll.»

  Thnx, 'a sick owner HP.

  For later use, it's really kff upward, but I got it working again.

  1 changed the original memorycabs for much faster, 1600 mhz, I know that this mobo doesn't support, but he did start the computer, so I could run the Windows + arrows Bios recover.

  Installed the HP bios tools F10 + GIS and it worked.

  so I guess I have to myself a thank you and a boost of the kudosbutton, hahah

  Well, when your computer went down, don't give up and try everything you can, this prob took me about 3-4 days to eradicate, but now its working again.

  See you soon

• Program stops immediately after pressing any key on the keyboard.  Can no longer enter data in data fields.

  Program worked great until yesterday.  Whenever I press any key on the keyboard, he immediately leaves the program.  What has changed?

  Hello

  Would you please check with the account of another user with Admin rights to reproduce the problem.

  Kind regards

  Christian

• How to stop Firefox from the start?

  Hey, I think that this problem is part of a bigger problem.

  I tried the suggestions in https://support.mozilla.org/en-US/questions/989230 to the letter and yet nothing can fix it.

  For those who won't click on the link or the copy - paste. The problem is the following:

  During startup, Firefox opens automatically on my home page. In this case recently ever since Windows Update 8.1 on July 15, 2014. Also, what happens during the update, is that my ultrabook which supposed to have instant feature now seems to be ultra slow at the start and extremely slow when stopping down.

  Some programs have been installed except the 8.1 patch update and only different before and after that the update which is now Firefox start instantly.

  Solutions I've tried:

  (1) task Manager > startup > want to uncheck just Firefox at startup but not Firefox is here

  (2) open CCleaner > start-up > no even Firefox on it

  (3) searched msconfig > startup > go to the Task Manager > repeat step 1

  (4) went on http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx on the link at the top to start windows > No. Firefox has detected that either, 4-5 entry yellow and 1 red
  4A) have no idea what these means, what I notice, is that yellow could not locate the file, and the Red just here does nothing I guess.

  Here are the four steps I tried without success and I'm very sure that Firefox autostart is originally my laptop started slower than my computer pentium 4 windows 95 I have to the corner of my room.

  Further suggestions other than what I tried would be welcome.

  The problem seemed if being arrested since my laptop got another BSOD.

  I guess that this laptop just needs a foot in the head at work again.

• Download stops immediately after 2.5-2.6 MB

  When I use my WRT54G v5 router I can't download anything than it is on the internet about 2.6 MB.

  After 2,6 Mb were downloaded, download speed immediately drops to 0 Kb/s and it acts like it downloads again, but never finnishes.  This applies to updates or files of more than 2.6 Mb.

  This isn't a matter of download speed, the speed is very good about 0.73 MB/s.  Simply, it stops but allows me to start other downloads or consult the web pages while downloading remains at 0 KB/s.

  Sometimes I can 'trick' to operate by constantly start and stop so restart the download several times, but usually it does not.

  This is not a problem of the internet, as it works fine when connected directly via Eathernet rope.

  For me, it was suggested that it might be a firewall of the router.

  On a side note:

  I wish that routers have been just a simple connection to the internet, not a guardian of the gate to my stream.

  I can't find someone with the same problem.

  Thanks for the advice or information.

  Connect your PC directly to the modem and am trying to download files. If the download/download speed of the modem looks good, then it is possible that the router is one that is causing the congestion. If this is the case, the manual router MTU value and reduce its value to 1400. I hope this helps!

• Computer stops when trying to start a video

  Original title: husband's Vista, the computer turns off when you try to run a movie any.

  We cleaned the computer, put in a new card video, checked all the power settings and power cord, the fan works fine. the computer is a gateway on a vista running years, Helppppppppppp

  Hello

  1. you remember to make changes to the computer before this problem?
  2. you receive an error during or before the computer stops?
  3. facing this problem when executing online videos or videos stored on your computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you perform a clean boot and check.
  To help resolve the error and other messages, you can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Also run memory diagnostic tool: http://windows.microsoft.com/en-US/windows-vista/How-do-I-know-if-my-computer-has-a-memory-problem

  Thank you

• Computer stops abruptly after games for 5 minutes

  Ok

  This problem is more than a gambling problem, but it started as one. I installed Starcraft 2 around the time he was released and in the beginning it was only a problem that has affected this game here.

  What would happen, I log into the game and play some games online. After about 10-15 mins of gametime, the computer would just closed without warning, as if someone would pull the power cable. It happened several times, and so I decided to stop and uninstall the game altogether and settled.

  a month later, he would start to happen again, but this time with another game, Diablo 2: Lord of Destruction, it would work for 2-3 minutes and stop in the same way as Starcraft 2. And now, I can not update my antivirus without this inexplicable failure happening!

  I don't get any error reports, just the black screen offering me to enter in safe mode and other and start windows normally. Finally, 2 day actually, I reformatted my computer and moved to reinstall all windows updates and, Lo and behold, stop you again in the middle of installation, updates and now my computer wont even get to the login screen, that he just stayed on a black screen does not. I ran the recovdery CD and tried to fix it but its been 3 hours "Repairs to try" and I can't cancel the process. where can I get help in this situation so I can get rid of this problem leads?

  Hello

  To be able to remove ALL and reinstall all the cables (both ends), card and memory - in fact remove and
  replace - do not just tight. Remove the dust bunnies and clean the vents. Check that the
  fans of work (before and after opening the case). If a laptop on what you can do is reinstall
  memory and clean the ventilation openings (still may try to add a small fan as a test).

  Try the installation again.

  This sounds like material so if the above does not help you then probably need the help of a
  real computer store (not of leeks and glances at a Best Buy or other department stores) or the system
  Support from the manufacturer.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.