Much time for re - connect to the router wirelessly after waking from sleep

Hello, hope someone can help.

I 64but Win 7 on an Acer laptop, connected to a Belkin wireless router, when the computer wakes up from his sleep, it takes 30-45 seconds for the adapter to reconnect to my network - get the spinning blue "o" for a while.

At first I thought the wireless adapter was power down, under power options, that I made, it has a maximum performance in all cases.

No change. Then, I thought that perhaps it was due to the computer, enter the hybrid sleep mode, so I disabled who.

No change. Then, I checked to make sure that the SSID of the router was broadcast (it is) and that the WEP keys are the same. They are.

I have to update my firmware on the router? The router is at least a year - I don't have it in front of me, but it supports N and g should change my wireless network card drivers (it is an internal Intel chipset).

What else could be the cause of this delay? It is very annoying. When connected, everything works fine.

PS, I should add that I use the power of Microsoft Signature Plan, but I have changed the power adapter, as shown options above.

Advertisement

Thanks Jack. I guess I'll have to live with it for now, although I might update my firmware on the router just for fun and giggles

I ended up changed to WEP as WPA seemed to worsen my connection (fewer bars).

Tags: Windows

Similar Questions

  • TM2 - Win7 hangs at the splash screen after waking from sleep and hibernation

    I had intermittent problems with the mode 'sleep' on my laptop TM2T-2200 (Windows7 64-bit).  Wake up sleep & put into hibernation, the system will have problems with log-in intermittently.  Generally speaking, I'll be able to move my mouse cursor and enter my password - but pressing enter, the system hangs at the splash screen, requiring a hard - reboot (by pressing the power button).  Sometimes, I've not yet will be able to enter my password before it crashes.

    The problem seems to occur more in energy saving mode, but it occurred in '' HP recommended Mode '' once or twice now, too.  It looks a lot like the problems reported for other models HP here:

    http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/Pavilion-DM4-freezes-when-idle-and-after...

    Any suggestions?  Is it possible to know if a particular driver or a program that hangs?

    Update: my problems seem to be associated with protection against malware of Comcast constant guard and disappeared after uninstalling the program.

  • Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

    HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

    Have you tried to update the firmware on the DI-514?

    You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
    To give a static IP address to your printer:
    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Enter the IP of your router (on the Page of the Network Config) for the gateway.
    -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
    -Click 'apply '.
    Now, stop the router and printer, start the router, wait, and then start printing.

    After that you remove and re - add the printer to your Mac.

    Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

  • Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

    Smart card reader does not correctly connect once the virtual machine is restored from sleep using the vmrum controls

    Scenario is,

    1. smart card reader is connected to the VM with card inserted in

    2 initiate a prompt suspension of the VM toolbar

    3. now to resume the virtual machine by using vmrun command into the host machine

    WS t vmrun start xxx.vmx

    Now, the recovery of VM but the smart card reader that was previously connected does not work properly in VM that is to say, sometimes after CV chip card reader driver is uninstalling and a few other times, chip connected to the drive is not available on a virtual computer

    My requirement is after power, smart card reader can stay connected to the virtual computer with the already installed driver and the smart card.

    Kindly help with this problem.

    Host operating system: Victoire 2012 R2

    The VM OS: win 10 x 64

    Thank you!!

    Dear all,

    I had a work around for this problem. By adding "usb.autoConnect.device0 ="0xVID:0xPID"" this statement to the VMX file, solves this problem, that is, whenever the VM is wake-up by clicking on the link CV or using vmrun commands, it connects the unit in question automatically and it is charging correctly with his driver. Obtaining smart card detected after sleep\hibernate with no problems.

    VID & PID is respective ID of the device that can be seen in the properties of the Device Manager "Device Instance path".

    For more information about this, visit VMware KB: automatic connection of USB devices to the virtual machine power on

    ~ Surendra

  • Unable to connect to the router (even after reset)

    I'm really frustrated, and I hope that this community can provide an answer. After all the hype around this router, it is he who gave me the most trouble.

    About a month and a half... completely randomly it seems to me, I could not connect to the router more. Not through intellectual property, routerlogin.net/com...nothing. It just says: cannot display the page. I did everything I could possibly think, tried all of the suggestions I could find here and elsewhere and still nothing would work.

    I finally did a hard reset and obviously lost all my settings... and RIGHT AFTER the hard reset after upgrading the firmware, I can't connect to the router again. This could be the cause? Is there a way around it?

    The router worked fine until about a month and half ago. Then I stopped being able to connect to the admin page. Several resets hard did nothing.

    I ended up RMA'ing it and the new replacement works fine (for now).

  • Roads remain in the routing table after disconnecting from the vpn client

    I am facing this problem for my clients and the easy vpn server.

    My Cisco 3825 has an easy vpn server configuration with an ip pool. When one of the customer disconnects and isakmp and ipsec his deleted by the router itself. The route pointing to the ip address of the ip pool is still in the routing table. This time, another vpn client connects and get the ip address of the ip even pool. But this new vpn client connected is located on a different interface of the router. Thus, an extreme problem happen! A route to 2 next hops is created! So bad!

    Someone else can help me? How can I delete the wrong way?

    Thank you!

    Jason Lam

    It can be useful to upgrade because he accompanied several questions IPP in earlier versions of the code with the roads not removed during the SA goes down, etc.

  • Windows 8 I lose the internet connection after waking from sleep mode

    My wife has a new laptop from Toshiba with Windows 8. When he wakes from sleep mode, it detects all wireless signals. If it restarts the computer, it detects our own wireless, as well as all the neighbors signal. Is there a simple way to correct this trend? She dislikes having to reboot the computer whenever she wants to use it.

    Very interesting what's happening on a new machine. Are you sure the original wireless network card driver has not been updated (i.e. through Windows Update or its equivalent at Toshiba?)

    I guess that the wireless network card driver doesn't handle well "message sent" by the system when it changes the power state change leading to a 'dormant' device (in this case the WiFi network) on the revival of the fashion Watch (same problem with the Hibernate?).

    Not knowing your model Toshiba, or wireless network card let me suggest you try the following if options exist for 1 # *:

    1. Go to the section of the network adapters and Device Manager. Right-click your wireless card, and select Properties. Go to the power management tab, uncheck allow the computer to turn off this device and check allow this device to wake the computer , and then save your changes
    2. Go to the control panel and Power Options to change the parameters of the plan (for the selected power Plan), and then select change advanced power settings / wireless adapter / power save Mode / connected and select value is A maximum Performance otherwise affect this value

    * Not sure about my translation of terms/options used above - I am not in an American version

    If the above does not help I'd you make investigations with Toshiba on this issue as the owner of a new machine, you're probably eligible for a level of support.

    + Feel free to bring your network card and Toshiba models - this helps in search of possible measures and troubleshooting. And it could help other people if solve you the problem sooner or later...

    Hope this helps

    See you soon

    LZ.

  • My PC loses connection local and Internet after waking from sleep/hybernation.

    My PC loses connection local and Internet after wakes up from sleep/hybernation. The problem is solved by resetting the network card, but it is frustrating to have repeated resets every time the system in place to wake up. I am looking for a patch, I searched all the support sites and forums where there are similar problems that have been offered to different patches over time, but each of them has failed.

    Vista 64 SP2

    Hello

    Check the updated drivers for the NETWORK card and WiFi.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat above for network card (NIC) and is a good time to get the other updated drivers Vista
    love the updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    Also, check the power supply for the device management settings in device - double click Manager
    the device and the power management tab.

    ==============================================

    More if necessary:

    Check your settings (BIOS/CMOS) - usually F2 as you start - Wake on Lan, Wake on Modem and so on.

    Troubleshooting Windows Vista sleep and extended
    http://www.computerperformance.co.UK/Vista/vista_hibernate.htm

    How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista
    http://support.Microsoft.com/kb/950686

    May need to reset all to default power settings and then place back as you prefer.

    How to solve a problem of Mode for Vista and find a Solution
    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

    How to enable and disable Hibernation - you can try to disable and re-enable the it. http://www.Vistax64.com/tutorials/165508-hibernation-enable-disable.html

    How to restore the default power in Vista (and then go back and change as you wish)
    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Panel configuration-Device Manager - look at the settings for the network card, WiFi, Modem power management.
    and other devices. (Double click on the device and the power management tab)

    May need to reset all to default power settings and then place back as you prefer.

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

  • Satellite L40-139: new graphics driver is causing the problem after waking from sleep

    I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

    In the last days I've updated the software and drivers from the Microsoft Update web site.

    Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

    Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

    Does anyone have a definitive solution for Satellite L40?

    I looked at four options.

    1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

    2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

    3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

    4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

    Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

    Hello Peter

    If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

    I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

    Please post the result.

  • Satellite M200 - problem detection USB connect after waking from sleep mode

    Hello. I need help! I'm having trouble with the laptop Satellite M200 (Vista) - after the awakening of the mode standby, none of the things connected to the USB port is detected, even if they worked perfectly before sleep. No mass reader, mouse, iPod is detected - even the SD for ready boost is not detected. Simple plug in and out calls any action (window AutoPlay etc.). Sounds like a BIOS problem but my laptop is completely up-to-date with all drivers and all the rest (of Windows and Toshiba support website). Would appreciate any advice. See you soon.

    > fully up-to-date with all the drivers and everything else
    The latest version of the BIOS too?

  • Desktop computer does not display the computers on the network after waking from sleep.

    Both computers work on Vista Home Basic. Problem started after computers, the router and a DSL modem has been turned off and unplugged. After the awakening of the day before, the Office would display only the router and the laptop, but the way that he could not establish. Initially, a reboot of the desktop computer has solved the problem.

    Reset and re-installed the router. The three elements of the network were visible after the start, but IE 8 soon at the opening of the homepage. Again, after "standby" mode, only the router and the laptop displayed.

    After additional restart, only the router is displayed. The laptop shows all three elements and accessing office files.

    Suggestions?
    Mike

    Hi Syed,

    I did a full reset/reinstall the router, carefully following the manufacturer's instructions. Both computers are displayed in each of their respective lists of network, even after waking up from sleep mode.

    This issue is resolved.

    Thank you

    Mike

  • HP P1606dn printer connection to the router wireless

    I have a HP P1606dn printer and was able to print wireless when I was able to connect the printer to my Airport by cable. I had to move the printer in another room, so I can't connect it to the airport by wire. Is there another way to print wireless?

    Thank you.

    .. .to was able to print wireless when I was able to connect the printer to my airport cable

    What type of cable?   Ethernet?  USB?

    What model router AirPort do you have?

    Are you still using OS X (10.5.8) you specify in your profile?

  • Express airport, used for the speakers, loses the connection to the network wireless after about 30 seconds

    Second generation of airport express base station used to play music loses connection wireless, also a second express network, gen airport after about 30 seconds.  Tried to change channels, reorienting the airport, using a different device - ipod and ipad, to listen to music - nothing works. Interestingly, my Amazon Music plays fine on the same airport and speakers and loses no signal.  Any help?

    Where the two Express base compared to the other station? Same room, different rooms or different floors? The host of iTunes (iPod or iPad) location when the streaming? Near the Express which provides the network Wi - Fi or the one used for streaming?

  • White screen to update the Portege M400 firmware after waking from sleep state

    Why this topic has been closed? http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19803&MessageID=74193

    I just wanted to add that this update does NOT resolve the problem in vista and it is NOT a driver problem. The update will not install in vista and vista is already provided with videoprt.sys 5.1.2600.2911.

    When it occurs, the laptop again indeed. You can manipulate and even hear the sounds, but the backlight does not come on or there is no output from the video card. I'm fairly certain that it is a signal of hardware problem.

    No matter what laptop I, euro or us, could someone please tell me the file so that I can look at what changes actually code?

    Hello

    > Why this thread has been closed?
    I think that the admin closed this thread because, as indicated by the user lumix2day the MS update has solved this problem.

    The M400 was delivered with Win XP it's why the update should work with Windows XP!

    Regarding your question.
    Looks like you are using your own copy of Vista on the M400.
    You should check if Vista is already up to date. Each week the new MS updates are published.

    Additinally, I recommend updating the BIOS and check for a driver update more recent display!

    Best regards

  • EA6500 unable to connect to the router after Time Machine

    Just got an EA6500 - updated to the latest firmware available.

    I have attached 2 x WD NAS and 1 x WD through the USB port of the device.

    Each time after I finished running Time Machine on the MacBookPro (written to one of the WD NAS), I can no more connection to the router as neither the local IP, or the cisco connect cloud. The error message I get (loosely formulated) is: unable to connect to the router. Please ensure that the router is connected to the internet.

    At this point, all the devices connected to the router (wired and wireless) still can access Internet perfectly. Only the console of the router is therefore more accessible.

    Anyone else have the issue?

    Any ideas on how to solve it?

    Contact support for Cisco and the person advised me to do a factory reset (even if the router is new with no customization!). Regardless, it now works correctly. Cisco Cloud Connect works always before, during, and after a Time Machine.

    "When in doubt, try to turn the grid and the.

Maybe you are looking for

  • Satellite Pro 2100 - works does not with 2 sticks of RAM

    Hi all I've been with sticks of 2 x 512 MB RAM from a reliable supplier that reassures me that this RAM is compatible with the SP2100 laptop. With the two sticks installed, as soon as the machine is running, I get no display and 5 beeps (1 long, a fo

  • PathAway for NB200-122

    My NB200 supports 3G, I inserted a SIM card of twins in it and it works well. The GPS also works very well and gives me the coordinates of where I am. However, as stated in the user manual, there is no navigation software installed. What would be the

  • iPad Air2, Wi - Fi and MAC filtering

    Two other iPads in the House and my iPad Air2 keep disconnecting my wireless router when I turn MAC filtering AND broadcast THAT SSID is disabled. I can't even manually connect to the router, but when I turn one of these functions, or both, the devic

  • Cannot connect iPad pro pencil

    I was wondering if it is possible to reconnect a pencil for iPad pro, I clicked accidentally forget this device. Now, while trying to re pair the pencil, I get a warning saying this device can not connect or work properly with the iPad. Advice please

  • WaveformChart bug? (LV2014 SP1)

    Hi all Here's a VI in which I put parcel properties on a graph and then draw the values inside every 100ms. When I run it I get a "not enough memory to complete this operation" message after hitting 'Ok' on the message I see that this message was not


HashFlare