Multi-monitor (PCoIP) and Windows 7

Similar Questions

• Dual monitor Dell and your Sharp TV screen

  I have a Dell 3008WFP monitor and a TV Sharp LC52LE810UN of. The monitor is connected using DVI and the TV is connected using HDMI. In 'screen resolution' the recommended setting for the Dell monitor is 2560 x 1600. It is a 2 monitor. I can't double bill for work. correctly. The resolution gets blurred. The only way I can make it work is to expand the display. It has already used to work when it is used my Samsung P2770 monitor.

  I am running Windows 7 and my graphics card is NVIDIA GEForce 310.

  Can someone please.

  Hi ManajitSengupta,

  You want to hope that it is not a compatibility problem, because that could leave you a GROUND for a solution. Assuming that everyone even working on a solution. I had a few problems after the upgrade of Vista that never existed when running the Windows 7 RC on the same computer. The cause of a problem is not necessarily in a straight line between Win7 and the problem device. The only things I can think of now are the driver/software standard, tedious, technical troubleshooting. Starting by ' screens exhibit the same behavior when a simple SVGA driver is all that is installed? »

  Some device of even difficult problems have been resolved by reinstalling

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/cant-use-dual-monitor-with-Windows-7-64-bit-and/58f2706d-ed89-46ab-80f1-ad677b4c1e13

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-docking-station-dual-monitor-display/2abeebc6-8015-4FB1-B948-dba5e27c9bfb

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/dual-monitor-Setup-cannot-move-Windows-from-one/e14a0b3b-8e95-4FA5-9f68-036dde61f0b6

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/multi-monitor-support-in-Windows-7-Remote-Desktop/c629d317-88c2-48BA-973a-da04a8c9d579

  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-multiple-monitors

• Impossible to multi monitor in windows xp

  I got a PC by a family member and wish to multi monitor. Indicates the PC have windows XP. When I access the control/display panel etc. There is no available in multi monitor option. I've never experienced this before. Can someone give me advice please on what do I do?

  Hello

  What is the brand and model of the computer?

  I would like you to follow the steps in this article.

  How to configure and use multiple monitors in Windows XP: http://support.microsoft.com/kb/307873

  I hope this helps.

• My monitor's display windows, word, etc. vertically and not horizontally

  My monitor's display windows, word, etc. vertically and not horizontally - how to fix?  I have the screen tilted on its side to use it right now.

  Press the CTRL or Alt + key staggered with the arrow keys to rotate your screen. It is a function of your graphics card. You can also right click power on a space empty on your desktop and in context to the rotation menu look, Orientation, landscape, or something similar.

  Kind regards

• Touch the touch screen moves the cursor appear on another monitor in a multi-monitor for Windows 7 system

  There are three 3 monitors on this system. Two of them are the screens LCD Dell 2407WFP-HC and one is the touchscreen Acer T230H. Dell monitors are connected to a NVIDIA Quadro FX3500 and identify as monitors 1 and 2. The Acer monitor is connected to a NVIDIA GeForce 7600GS and identifies as monitor 3. The system runs Windows 7 Ultimate x 64, with updates. Everything works fine except for the touch screen feature.

  According to the instructions I used the Tablet PC configuration to configure the touch screen. In the installation program, reports monitor 2 Dell incorrectly as having entered touch available and the Acer monitor 3 reports as not having NOT available - also incorrect enter key.

  When I touch the Acer screen, the cursor appears on the monitor Dell 2 and moves according to the movement of my finger on the Acer screen.

  1. Go to the control panel and search for "Touch".
  2. Click on 'The Tablet PC settings'
  3. Click on "Setup"... "right" configure your stylus and touch displays.
  4. Choose "enter." »
  5. Press the 'Enter' key until you see the instructions displayed on your actual touchscreen.  Tap the screen and it will say something like "press ENTER to move to the next step.

  You should now see your contact to events (and mouse) are displayed on the touch screen when you... Well, touch.

  Hope that helps.

• Resource monitor shows Windows 7 and Windows Vista running different programs

  I followed my programs and other at quite a bit lately since my system hangs and is running more slowly.  I'm trying to understand what might be causing this. I only had Windows 7 loaded on this desktop computer, as I bought it.  However, today I noticed that in the resource monitor to the title of the CPU that Windows 7 is the context of the operating system for some programs and Windows Vista is the context of operating system for other programs (including programs based Apple).  Is this a problem? Could it be added to some of my slowness and crashes?

  This indicates the operating system, the program has been designed to target. If the application does not specify this in its manifesto, it is assigned to a context of Vista. This has been added in Windows 7 that allows new applications to benefit from new features, while older applications continue to work on the former.

  http://social.technet.Microsoft.com/forums/Windows/en-us/cc0740eb-B06A-41a6-98e6-088529bf1f10/what-does-operating-system-context-mean?Forum=w8itprogeneral

  http://msdn.Microsoft.com/en-us/library/Windows/desktop/dd371711.aspx

• How to monitor the process and Windows activities

  Hello world

  I'm a player who plays full-screen. Some process or app steals focus once every few hours, unpredictable. This me tabs effectively out of my game on the desktop. It is only an annoyance, but yet, it's a real nuisance to do without good reason.

  Anything that flies focus leaves no trace of what it was, as far as I can tell. I'm just at the level of the office. (Exactly how I see what Win7 thinks has focus, if nothing seems?)

  I guess it's a thread that checks the updates, or some other thing, what has been written amateur and does well with games. Some games are also poorly written in terms of, what happens if something else could mess with the office or ask for focus. My guess is that it is a collision of stuff poorly written, but who knows.

  To make a long story short, is there anything I can do to see just how * had * focus (focus on the past), even if it's over now?

  I highly doubt that it is one of the major applications that I am running. I usually only Word and Excel 2013, Chrome and Windows Explorer to the top. I really doubt that this is one of them, but maybe. Who knows.

  It would be very difficult to test for that is happening, because it is very unpredictable. Also real inconvenient to keep my other applications closed for hours. This is why I ask if there is another way to catch the culprit himself, not all turn in everything.

  Thanks if you can help!

  HI Yann,

  Thanks to you, I was able to use the event viewer on Win7 / Windows Logs / request to see that I was being thrown out of my game on the desktop when the so-called SelfServicePlugin.exe "on the road". I checked in the Task Manager / process and saw that it is a Citrix Receiver background utility.

  Citrix Receiver (v. 4.1.0.56461, (c) 2013) is the remote software we use to open a session in our local network of work at home, however, the plugin is something all the time, not just at the point where it is actually using Citrix. I guess that it speeds up the loading time of Citrix, or whatever. (It seems that every piece of software must have a connection online if used or not, these days.) And no, I wasn't playing games when remoting to work, laughing. As I said, the receiver is there all the time; I was spilled on the desk in the evenings, etc.

  If I unload the plugin, I stop unexpectedly, the abandonment of game (and Citrix always starts very well).

  So, apparently, it is just this sloppily written plugin. I guess it is not surprising that something related to work don't care effect on the games, even after hours, laughing.

  Now that I know what it is - and it's not malware - it's so much easier to deal with.

  Thanks for hanging in there and answering the question directly to me! It helped a ton.

  Mike

• See 4.5 true multi-monitor with RDP7?

  I read this in the guide of the administrator on the page 17: ' Microsoft RDP provides the following features: you can use more than one monitor in span mode '

  and this page 21:

  In a real session of multiple monitors, monitors can have sizes and different resolutions, and a monitor can be

  has rotated. If you enlarge within an application window, the window expands to the full-screen only the monitor

  that contains it.

  This feature has the following limitations:

  n the maximum number of monitors that lets you view a desktop is 10 If you are using the RDP Protocol

  view the Protocol and 4 If you are using PCoIP.

  n If you are using the Microsoft RDP display protocol, you must have Microsoft Remote Desktop Connection (RDC)

  version 6.0 or later installed in the desktop view.

  I'm not completely sure if I read this right, but it seems that true multimonitor is NOT available with RDP. Even if Windows 7 and the last DRC have no problem with that at all. Can someone confirm (or reject if all goes well) that this is the case. I really prefer to use RDP, but I need the true multi-monitor.

  Kind regards

  Poort443

  You need on the client, you connect from version 7.  Version 7 comes with Windows 7 and Server 2008 R2.  You can download version 7 for XP and Vista.

  I wish version Mac was up to 7 and I wish THAT WYSE would improve their RDP to 7.

• What is the purpose for TMM (Microsoft transient multi-monitor Manager) in Task Scheduler?

  I need some information regarding the purpose and the use of a Scheduler application named TMM or Microsoft transient multi-monitor Manager, please.  Judging by the name of this task, I guess that it is necessary for this application runs when more than one monitor is connected to a computer.  Am I correct in this assumption?

  Because I only have one computer and it has never been more than one monitor hooked up to my computer, do I really have transient multi-monitor Manager Microsoft runs all the time?  If this application does not need to run in my computer, is - it normal that TMM is disabled?

  Janice M. Strunk

  This can be interesting to read. Here is a response from forum Discussion of Vista. Contrary to what you and I thought, this response has proposed.
  http://www.Microsoft.com/communities/newsgroups/en-us/default.aspx?DG=Microsoft.public.Windows.Vista.General&mid=db368e16-dbd1-4654-B644-678d47674c7c&SLOC=en-us

  Enable or disable TMM
  http://www.Vistax64.com/tutorials/115320-Transient-Multimon-Manager-TMM.html

  t-4-2

• Multi-monitor 7 VMWare Fusion is improved from 6?

  Hello VMWare,

  Currently if you google "VMware Fusion 7 multi-monitor Support" this thread is the best result:

  https://communities.VMware.com/thread/458878?start=0 & tstart = 0

  In this thread, the top answer is a VMWare employee is studying ways to improve multi-monitor support VMWare Fusion. It's been a year, and you have now unlocked a new major version, to what you ask me to pay to upgrade.  I guess that these issues have been addressed, but I see no reference to improvements in this regard on the VMWare Fusion 7 product pages.

  Can you please address the following two questions, which are massive trouble when using Fusion 6 (and I want to emphasize, nor issue seems to affect your competing product Parallels):

  1. If you have more than two monitors (three for example), can you use Fusion 7 full screen but use only 2 screens instead of the 3? In fusion 6, you can use one or ALL, I really hope that this behavior is changed.
  2. When you use a display fullscreen VM on several monitors with the new behavior of multiscreen fullscreen introduced in Mavericks, can you change the space of one of your monitors away from the virtual machine and then on another monitor always displays the virtual machine, interact with the virtual machine without the spaces on your other monitors to return to space the VM?

  If you can confirm that the issues have been addressed, I fortunately modernize today.  If not, you clearly that this support is a reason some not a priority for VMWare and I go to Parallels, after buying the latest 3 versions of VMWare and be a happy customer otherwise.

  Thank you for your answer!

  They do not react because the answer is that they did not have * nothing * to improve their software in this regard.

  You better buy Parallels, making these two things well.  Even if the product windows VMWare offers this kind of behavior of multi-monitor, they are apparently not interested in doing the same thing on their OS X product.  I'm not interested in waiting around for them to recognize it as a priority, so I switched to Parallels.

• Hanging of Thunderbird 38, gel and does not question. 17 accounts pop (Win 8.1, MalwareBytes and Windows Defender)

  Since the update of Thunderbird to 38.* I had nothing but problems with Thunderbird wedging (spinning wheel waiting), a "Mozilla Thunderbird (not answer) ' in the header bar, whiting of window application out and possibly TB box in hell - a small box to appear asking if I want to - close the program, expected so he can resolve itself , or check the internet, then close. I now give the floor it the box to hell (B2H - call it all you want, but I'm cursed every time he pop up!)

  I did everything proposed here and nothing suits. I have used Thunderbird for years with all the same files and Add ons WITHOUT problem. On the first day of the 38 update everything has changed. When Mozilla realizes that it is in the upgrade and find the problem!

  Here is what I tried with nothing working...
  1. I don't have AVG, the only malware bytes and windows defender
  2. it still happens in SafeMode with no active add-on.
  3. I stopped saving function which slows down the frequency of the sinking, but did not eliminate the problem.
  4. I have deleted hundreds of older emails, thinking it was that but who have done nothing.
  5. I changed some accounts of POP at the thought of iMAP that was the problem but nothing has changed.
  6. I made several attempts to patch both Mozilla support and outdoors on the net. Nothing works. Looking at all the people who have the same problems, I have to say that the problem is handling of file. I noticed that as the issue with others who have multi files and emails. The answer is not to reduce these volumes but to understand why thunderbird managed their fine before and what has changed to make the program hang now? Who should be on your end, taken responsibility. Keep us faithful and solve the problem...

  Here are my tips...

  A. I have several files and thousands of e-mails longer and have manged fines, as matter of fact, Thunderbird has been great. Then like a good stooge I approved the moz and did my upgrade to 38. Never had a problem before the upgrade. After the upgrade, everything went to *.

  B. the 38 version upgrade was a big change. When I look in the folder that has been labeled the envoys or Inbox folder (where all emails from each account is collected), all the emails listed would disappear when I moved my mouse over them! Emails disappearing! They were there in records specific e-mail below but not but in the case of head as if it were just a day earlier and with the upgrade. I thought that as an addition on the question and waited for the difficulty that happened not so long ago. Again, which could be a problem of record add-on.

  C. the upgrade to 38 were other issues, but if the madness going no problem was not bad enough, the problem seems to be growing with each ' update or bugfix that followed. Don't hold me to it but I think it was in 38.1.2 or 8 (I think that's it. I wasn't paying attention, but if I had known that I would have to tell it, I will!) That's when hanging interminably long. When the program closed at least I got a project saved, then I read on line that the problem was the registration of open messages, I turned the auto reduction. He did change the frequency of the hanging (white screen pause) and timing (where the B2H appears), but he was always there and always!

  D. I had hoped with 38.2 there will be improvements. Nothing has changed. I didn't know that 38.3 would make this change/fix, but it's not. If I write all this, so you have what I know as a loyal user since 2007.

  E. here is what you need to complete the picture. I'm on a PC running 8.1. on an Intel i7-4770, with 32 GB of ram, now you tell me when you will issue the update to fix the problem! Once again, Mozilla, I suggest you start by looking at how TB 38 manages several emails, files and archives. Not all of us have only one e-mail account. Most of us have been really happy with TB before 38. If you can't find the question, can you show us how to get back to a version prior to 38?

  Thanks for listening and hope that helps!
  @v @.

  
  

• Can I use my 27 "IMac as a monitor for my Windows laptop

  Hello

  I want to use my iMac 27 "(fin 2012) as an external monitor for my Windows laptop." On my laptop, I have a miniDisplay port and on my iMac, I have a Thunderbolt connection.

  Is it posible to connect between them, or is it only possible to connect to apple to apple...

  Wouter gr.

  Read carefully > use your iMac as a display with the target - Apple Support Display Mode

  Some of them indicated that they were able to make a PC work, but only if the PC has a video card with Mini DisplayPort connector on set that meets the requirements of CT. > http://science.opposingviews.com/use-imac-pc-monitor-9320.html

• HP L1906 monitor: HP_L1906 with Windows 10 display does not work

  Under Win7 Pro, I used two monitors, a DELL and HP L1906 (my favorite).  After the Win10 upgrade, the DELL works just fine.  The HP is not displayed.

  In the settings the LP is detected, but under the name generic and none of the parameters of work, nor can they be saved.  I tried swapping the connections, thinking maybe Valentine's video, but always ended up with the monitor DELL works, not HP.

  How can I make my HP L1906 monitor works with Windows 10?

  (pro 64-bit)

  Hello:

  See if the vista driver works...

  I compressed upwards and tied the monitor driver below.

  Download and unzip the drivers in their folder.  Don't do anything with the files in the folder.

  Go to the Device Manager, expand the category of device monitors.

  Click the generic monitor p & p.   Click the driver tab.  Click on set to update driver.

  Select her browse my computer for driver software option and navigate to the driver folder, that you unzipped.

  Make sure that the include subfolders is selected and see if the pilot goes like this.

  Then restart.

• Satellite A100-02 b PSAAR: trick to be able to save for the multi monitor users

  Hi, people

  I always use an external as extension of office monitor when I connect my Tosh to AC.
  And I just found out, when I plug it all and go truly mobile, the graphics card still provides a signal to the VGA Port for the then nonexistent extern monitor.

  On my Satellite A100-02 b (PSAAR) that consumes about 2 Watts, which means about 10% of the duration of battery life, which is about 20 minutes!
  So, if everyone did the same thing
  -Place a link on your desktop or startmenu to 'C:\Windows\System32\control.exe desk.cpl"to have quick access to the settings of the monitor
  -turn off the monitor 2
  - and enjoy longer battery life!

  It's on my Vista, I don't know how XP performs...
  Welcome, Matz

  Hello

  Thanks for the very useful info.
  I think it could be very useful for everyone who uses batteries very often.

  Good bye

• When I have an icon on the second screen of my two monitors, it opens on the primary monitor first, and I have to drag it.

  Is it possible for me to make the window open only the screen that I opened in?

  Hello

  What operating system do you use?

  If you use windows7, I suggest you to follow the links and check out them.

  Setting up dual monitor: two screens are better than one

  http://www.Microsoft.com/athome/organization/twomonitors.aspx

  Move windows between multiple monitors

  http://Windows.Microsoft.com/en-us/Windows7/move-Windows-between-multiple-monitors

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area