Multimeter simulation Multisim not showing after reading press simulation

I'm running student multisim version 14. I made a very simple circuit and to place two multimeter and run a scan dc.

But the problem I am experiencing that I'm window calculation but multimeters not show any value of simulation.

can someone help me understand this please.

Hi shabeesatsangi,

The meter components are intended to be used during the interactive simulation. When you run the DC OI analysis, you will see the results in a table in the grapher.

To display the values in your multimeters, change your simulation mode to Interactive and run the simulation.

I hope this helps,


National Instruments

Tags: NI Software

Similar Questions

  • photos not showing after upgrade to Version 1.5 (370.42.0)

    Photos is automatically updated today and after some time 'day' photo "welcome to photos" library UI shows with choice of actions.

    I don't see the dates of my photos on the left side of the user interface, but there is no content.

    I restarted the application several times without change.

    I restarted MBPro but still no change.

    Computer: MBPro retina running

    The OSX Version: El Capitan 10.11.4 (15E65)

    Application: Version 1.5 (370.42.0) of the Photos

    We need details for help - what software you put in? Have you ever used before pictures?

    If you then try to double click the photo library in your pictures folder

    If you do not then slide the iPhtoo library you want to migrate the Photos icon in the Dock


  • the music will not show after update

    I've updated to 9.2.1 now I can't go to my music! When I open it, I get a picture of a girl with headphones on and the word 'music '.  That's all.  It came on my iPhone after upgrading too, but down, there was an option to try music from apple for 3 months or ignore.  It's not coming up on my iPad Air, and now I can't go to one of my music.  I tried to synchronize, reboot, but no luck.  I don't want to try apple's music, I just want to mine... any suggestions?

    It may take a few minutes - or more - before this is finally working, but I've seen several people talk about how they arrived at this situation.

    First go to settings > music > Apple music > Off. The following settings > WiFi > turn off. Then quit music completely, and then force restart the iPad.

    Press the Home button twice quickly. You will see small glimpses of your applications recently used. Drag to the left to find the music about slide upward on the overview of the application to close.

    To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

    Return to settings > WiFi > on. Start the music App. Wait a few minutes and make sure that the option to go to your own Muisc appears now.

  • album art not showing after the addition of

    I downloaded an album by a local artist (legally) and the folder included a jpg of the album art. I hung out in the section of the work of window read the album information and he showed here, but it does not appear as the cover art in the list of albums, or when I return to read the information. I also chose to add an illustration to get information and selected the file, and again when he appeared in the correct place, but again, only temporarily. As soon as I closed Get Info, he disappeared. Any ideas on what's going on? I get the other album art very well. I am running iTunes and OS 10.7.5. Thank you.

    If the album has more than a song, try to select all the songs from the album at the same time, and then do a get information on selection.  Go to the tab of the work in the window information from several element, and drag in the image file.  See if that makes a difference.

  • Icons not showing after that newly written extension is compressed to xpi

    I am a beginner who is learning the overlay extensions. I lived a good part of the tutorial. Then, I built a base extension with a toolbar button custom shell by following the steps described in As part of the exercise, I downloaded the recommended two icons (for add-on Manager and the toolbar) and did not change their. I add the code to the java file. I copied the file of extension (unzipped) in the folder extensions in my profile, as indicated and restart the browser. An install dialog box was launched, and when I told him okay, perfectly installed extension. The icons appeared in the Add-ons Manager, and I was able to drag the icon of the button to the toolbar. The button works fine, launches the java.

    Then, following the instructions on another page tutorial, I used 7 - zip to archive all items in the folder root extension, in Zip format and gave the file extension xpi. I uninstalled the original extension in the extensions folder, then bounced the browser. Then, Manager of Add-ons, I called 'install module file' and select the new xpi file. Installation went through the usual confirmations, and the extension has now been reinstalled. Only one problem - the two icons are empty. Both in the modules and Manager on the toolbar button. I can click the phantom button in the toolbar and it still launches the java, but no png images arise, including in the Customize dialog box.

    I tried to manually reinstall the extension, and the icons will appear. But a subsequent xpi installation leaves them empty. I tried to re - create the xpi file using the zip program from Windows instead of 7-zip, but still had the white icons.

    In searching the Web, I found an instance of another user having lost images of the icons only after spending like a Flash of extension, is not just me. But the replies to this post did not seem useful.

    Any ideas?

    It took whole unzip to true in the installation of rdf, so that all the icons would get unzipped and be available for use.

  • Rules of mail and signatures not showing after upgrading 10.11.4

    HI - my mail rules and signatures appear not in Mail preferences after update to 10.11.4.

    Can I get back them?

    Thanks in advance


    I was wondering if anyone knows the answer to this?

  • FF4 does not show quick reading of the articles of the site functionality

    On some sites such as huffingtonpost.comnews, the main items are associated with a picture. When you place your cursor on the upper right corner of the photo, a 'Quick read' option is displayed. By clicking on which displays a brief summary of the article. The quick play option appears in FF3 but not now that I installed FF4.

    It seems to work for me, see screenshot.

    Try to upgrade to the latest version which is 4.0.1 by clicking help | About Firefox | Look for the updates.

    If the problem persists then, try running Firefox in Firefox to solve the issues in Safe Mode. If it works properly in this configuration, then one of your modules is the culprit.

  • Windows 7 update history not showing after restore the Image of external hard drive

    I just restored windows 7 from a system image on an external hard drive.  When I used windows update after restoration update history had disappeared, although I found the updates in the updates installed, I wonder if something is wrong and if all my updates are in place and why did do that AND, can I GET BACK. ?. ?. ?. Everything seems to work fine... /.
    Thanks and let me know.


    The version history is just a list containing the results of the applied updates and non-operational systematics
    importance. The installed updates is the important file that shows what updates have been installed.

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • Video not showing after upgrade yesterday, audio only


    I have a few files that plays where bute well after the update since the appstore yesterday, only the audio track. Here is the Media Infosa:

    Format                                   : AVI
    Format/Info: Audio Video Interleave
    Touch: 175 MiB
    Length: 23 min 26 s
    Modus der Gesamtbitrate: variabel
    Approximately Bitrate: 1 044 Kbps
    Kodierendes Programm: VirtualDubMod (build 2366/release)
    verwendete encoder library: VirtualDubMod build 2366/distribution

    ID                                       : 0
    Format: MPEG-4 Visual
    Format profile: [email protected]
    Format-Einstellungen as BVOP: 2
    Format-Einstellungen as Qpel: Nein
    Format-Einstellungen as GMC: no warppoints
    Format-Einstellungen as matrix: Default (H.263)
    Codec ID: XVID
    Remark-ID/codec: XviD
    Length: 23 min 26 s
    Bitrate: 948 Kbps
    Breite: 576 pixels
    Height: 432 pixels
    Bildseitenverhaltnis: 4:3
    Bildwiederholungsrate: 25.000 FPS
    Color space: YUV
    ChromaSubsampling/String: 4:2:0
    BitDepth/String: 8 bits
    Scantyp: progressiv
    /(pixel*Frame) bits: 0,152
    Stream size: 159 million (91%)
    verwendete encoder library: XviD 0.0.09 (UTC 2003-03-25)

    ID                                       : 1
    Format: MPEG Audio
    Format version: Version 1
    Page format: Layer 3
    Format_Settings_Mode: Joint stereo
    Format_Settings_ModeExtension: MS Stereo
    Codec-ID                                 : 55
    Remark-ID/codec: MP3
    Length: 23 min 26 s
    Bitraten-Modus: variabel
    Bitrate: 83.1 KB/s
    nominal Bitrate: 128 kb/s
    Channels: 2 channels
    Samplingrate: 48,0 kHz
    Stream size: 13.9 Mio (8%)
    Here: Maximize an Interleaves
    Interleave, Dauer: 24 ms (0.60 video frame)
    Interleave, Vorlaufsdauer: 618 ms
    verwendete encoder library: LAME3.90.
    Kodierungseinstellungen: m - j v 0 - q 5 - lowpass-15, 3 - abr 128

    Pleasy solve this problem,



    iXpand Reader 4.2.1 is available now and the problem is solved. Update your application and you should be good to go.

  • Problem with the files not showing (after changing the USB mode)

    I have a sansa fuze 4 GB. version V02.01.09A. OS: Vista Service Pack 1. My rocket was working fine until about a week ago, when it stopped charging. but after installing the new norton 360 sansa is more appeared in my computer or Windows media player at all. I tried updating the driver but it says that the pilot was already up to date. I tried other USB ports again (front and rear), did not work. I decided to change the USB mode and it has finally started to load again in MSC mode.

    now, for the problem I currently have and, when I click on sansa via my computer and go to the music folder, it says "this folder is empty". I unplugged and watched in my music list, and all the music is there. I tried to put a new song on the player, disconnected, and when looking through the songs of the player the new song is here. I reconnected it, the new song is in the music folder, but the other songs are not listed. In addition, I have a microSD card that is listed as "o" in the car, all the songs I had on this appear, but not those on memory internal to the sansa.

    How can I get again list all music files in the folder?

    Note: I do not sync as it has only some of the songs I want on my sansa. the way I add songs is to copy and paste to the folder of the sansa player

    Okay, I don't know why or how, but it works now in MTP mode. I saw you are solutions, but I decided I'll just change the mode before trying to have ideas. until I reconnected it I also removed the microSD card, and it worked perfectly (make a backup of my songs). the problem could have the sd card in all this time?

  • Google Translate not showing after export to HTML

    Hello world

    I am currently working on a website for a client that I work with. I created a site in Muse and when I add the Google Translate widget, it shows a lot about the site of temp catalyst business, but when I export to HTML it disappears completely. They plan on using their own servers to host the site, so using HTML is a must. Any ideas on how to solve this problem?


    If you do this on the spot, how do you think Google can access the local site and translate it? The thing is, it can not, then you will need to download the code on a web server, and then I'm sure the translation tool works.

    Kind regards


  • Install thumbnails not showing after the new drive

    I recently installed a new drive on my computer and reinstall Lightroom, everything seemed to go OK, but when I open Lightroom thumbnails are not displayed.Capture.JPG

    All my collections and files are there as before and all the keywords etc, in fact everything apart from the thumbnails.

    I hope it's just a setting that I missed somewhere, can anyone help please?

    Thank you.

    Just found on another thread, if anyone else has this problem, here's the answer. -.

    Go to your control panel and click on appearance and personalization

    Go to adjust the resolution of the screen

    Click on advanced settings.

    Click the color management tab

    Click on the button "color management".

    Click the Profiles tab all

    Scroll to ICC profiles

    Choose sRGB IEC61966 - 2.1 (sRGB color space profile)

    Click Add

    In devices tab selct profile and click on "set as default profile."

    After this operation and the opening of Lightroom 3, all the images were there!

    FAO: I had my default the sRGB following virtual device model profile.

    Lightroom 3 seems not to like it.

    Good luck. Let me know how it goes.

  • file Gallery .swf not showing after loadMovie() in one of the mc

    Hi I am trying to embed a .swf Gallery (by craftymind) file in my page within one of my frame.
    tried to load the swf file in a mc and it shows very well, but I can't get it to show the pictures.
    I was stuck with this a whole day and can not go forward... pls help.

    link to the gallery .fla file:

    try adding:

    This ._lockroot = true;

    for the main timeline of the SWF Gallery.

  • View the report not showing after test button

    It's really weird, if someone of you guys have had this problem before. It seems that teststand does not report. but I triple check all report parameters and parameters of the step and I have the same sequence of work on another computer and print the report. I tried to do a repair of windows testand and it didn't work either.

    There is an option in the settings of the Station to disable recording for all sequences of result. Can you check this setting and confirm that it is not enabled?

  • Site does not show, after a successful download of ftp host

    I use v7 muse and my domain name is on Godaddy, where I publish on site is ok, but when I upload to the ftp server, it says successful but the site is completely empty


    Please visit the following link nothing appear after loading in the browser.

    Kind regards


Maybe you are looking for