Multiple audio passage requires separate tracks

Similar Questions

• First Audio interpretation is a track with multiple channels.

  We have 4 audio channels, sometimes 5 or 6 channels (component of integrated audio system, LAV, ramps, etc.). All these channels are in a wav file.

  I want that first pro to interpret these data so that it uses only ONE piece on the timeline, with all the channels that have been heard in this track.

  I watched this tutorial, thinking that it would:

  http://TV.Adobe.com/watch/short-and-suite/mapping-audio-channels-in-premier...

  However, for some reason I can't find an option to do what I want. Did I miss something in the window change Audio channels? I can set the number of tracks to 1, however, it does not allow several channels...

  Now, if this IS possible... Can I still change each channel individually in first?

  I appreciate your response and your knowledge.

  Thank you.

  
  

  Sorry, I couldn't find a post edit...

  But this post saved my life, for all who have had the same question!

  Dealing with multiple audio channels in a track: Adobe Premiere Pro

• How to save on multiple audio tracks?

  I'm going by Apple Logic help to try and learn how to use it.  I am currently in the recording section, learn how to record on multiple tracks at once.  Here's what helps:

  Save on multiple audio tracks at once

  1. Do one of the following:
     • Choose file > Audio recordings overlap > Cycle Mode on > create titles and silent.
     • Choose file > Project Settings > save, then choose the Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
     • CTRL-click on the Record button in the control bar, choose Save settings from the context menu, and then choose Cycle > create titles and Mute from the pop-up menu, overlapping Audio recordings.
  2. Set the input source instrument or microphone for each track you want to record.
  3. Click on the button Activate in the track header of each track you want to record.
  4. Move the playhead to the point in the rule where you want to begin recording.
  5. Logic Pro includes a metronome, which plays a steady beat to help you play in time while recording. You can disable this active or disabled using the metronome button in the control bar.
  6. Click the Count button in the control bar so that the metronome play a preset count-in before the start of the recording. Note: For initial configuration, choose registration > plug-in software component count, and select a measure.
  7. Click on the record button in the bar control (or press R) to start recording.
  8. Start to sing or play your instrument. A new audio region appears on each of the active record tracks.
  9. Click on the Stop button in the bar control (or press the space bar) to stop recording.

  I did, but it does not work.  I created two tracks.  I go to a track and click the button Save, then go the other way and click on save, but when I click on the button Save on the Panel at the top, it records only to the last track, I selected the folder it does not save to the other channel.  It seems that as soon as I go to another track and arm to save, it disables the recording on the previous track.  Apparently, help left something in the process.  If anyone can solve this?

  Hello

  You must assign different entries for each track:

  Input 1 > track 1

  Input 2 > track 2 etc.

  

  TDC

• Dragging files in a new item, separate tracks

  Hello everyone.

  I have a video and 4 Audio Clips, if I select all the and drag them into the new item, stay audio in a track. What I like to do is: I want to be able to drag all of the files in new element, so all the Audio is still in separate Tracks.for if I have 10 Audio files I want to have 10 Audio tracks rather than each of them next to each other. I can create new tracks and drag and drop each Audio file in manually separate titles. But I wonder if there is a shortcut for this

  Thank you very much

  Hi Animationlife,

  Sorry, but that isn't possible, you can probably go ahead and place a demand for it.

  Feature request form

  Thank you

  Ilyes Singh

• Import files multitrack .wav on separate tracks

  Hey guys, recently did a session and the sound engineer gave me multi-lane .wav files.  There the mix on channel 1, Boom on channel 2, A LAV on channel 3, Lav B on Channel 4, etc.  When I import into hearing, he puts it all on a single track.  I want that they on separate tracks so that I can select audio power I want to use/adjust each piece individually.

  As a note, when I take him in the first, it is important on separate tracks.  I know that I could export first in separate tracks, but wants to avoid the extra step.

  Any help appreciated... Thank you.

  In waveform display, Edit > extract channels to Mono files. It's so easy...

• Is there a way to adjust the bass through multiple audio clips - PE13 simultaneously

  Hello

  I am using elements first 13 editing a video and I have a track audio voice-over that was divided in about 500 + different segments along a track of the timeline.

  After you save and play on some different equipment, I discovered that I need to lower the bass in all of the audio of any voiceover track.

  PE13 only seems to allow me to the bass on one segment highlighted at a time and will not allow a setting to make multiple selections of segments.

  It would be ridiculous to manually adjust the bass on 500 + individual segments, so I am assuming that there must be a way to make adjustments to the bass simultaneously on several tracks in the timeline?

  appreciate the pointers - thank you

  Once you have defined the level of bass on a clip, right-click on that item, and then select copy. Then select the rest of the clips, right-click and choose Paste effects and attributes.

  Another good thing of my Muvipx.com Guide for Premiere Elements on Amazon.

• should audio sync - I separate sync audio markers?

  Here's the background...

  I have been using Cyberlink Power Director for several years because I like it's multi camera workflow, but I am frustrated by its stability with large projects and get frustrated when it crashes on me without reason... so I decided to try the Premier Pro.

  I do the video for my son's hockey team, I use 4 cameras (2 x GoPro 3 black behind the goals and a 2 + Contour on the center of the ice ;.) NEX6 from Sony on tripod as the cam now I use a Zoom 4 for a clean audio track.)  I shoot at 1080 p 60 fps.

  Each game takes place in about 1 hour and 20 minutes.  The GoPro generate files of 3 or 4 per game to just more than 3 GB each; the outline of 2-3 records. and the Sony 6 or 7 files.  So I find myself with about 17 or 18 files per game, including the audio file of Zoom.  Each camera audio varies according to spectators standing near them, and action cameras are mounted on glass, aspiration so that they are somewhat isolated from the action on the ice.  There is no possibility of tap create synchronization markers, and I stop the Sony during period breaks to save battery power, so they are not all contiguous files.

  In Power Director, I drop the files of each camera one track in the MultiCam Editor, as well as the audio file and hit the sync by Audio button... successfully synchronizes 90% of cases.  It will sometimes miss a shorter file, and it's always one of the contiguous files, so I have never a problem manually a fall where it should be.

  I tried Premiere Pro this week, since I got my editing carried out earlier than usual, but the Audio synchronization failure.  I tried a simple test to fall just two files, I know, on the timeline, and synchronization using the audio just on the regular calendar synchronization, but it didn't.  I tried several different pairs of clips, but no sync.  I created a new project in Power Director and dropped the same two files on the timeline and use the synchronization of Audio and files were sync had no problem.

  My question is... MPCC must more separate audio markers, and my tracks audio remote and deaf hockey forever give me grief at the CCPP?  I'm always amazed at how good PD synchronizes, since it must be able to match the whistle blows and the thuds of pucks hitting the boards, among all the background noise local spectators at various locations around the ice... I'm doing something wrong, or PPCC's simply not going to do it for me?  (I looked at a dozen tutorials Multi Cam and Audio Sync, and I think I make any sense?)

  Thanks a lot in anticipation!

  www.Vimeo.com/Channels/pmlbb

  I can't synchronize audio in the timeline panel. I select the clips imported project of first pan - select all holding the key ctrl (Windows) > right click > pop-up > choose 'Create multicamera Source Sequence' and choose Synchronize as "Audio".

  So, if you do this and first cannot find synchronization, it's sad because your other software can.

• Inserting multiple clips piled on different tracks

  Hi all

  I know this must have made the point before and my memory has the thrill that I thought I had done this in the past, but I can't really remember or find it now.

  Basically, inserting several clips from project window into the timeline and piling on different slopes (vertically) instead of the head to the tail.

  Okay so going to answer my own question, after some game, I found this way to.

  Select all the files that you want to insert

  Right-click and select Create multicam

  synchronization via start, unless you want to try and audio sync them (I use the plural eyes 3)

  create sequences of multicam

  CTRL double-click the multicam

  This gives you a sequence with all the files on separate tracks, if I really don't want / need a multicam for this particular project, I cut and past in a new sequence can use the plural of sync audio vid, otherwise I'm just sync in the multicam and im ready to go.

  Although it works, it really should be an easier way, a Shift + Ctrl while dropping on the timeline... request feature!

  PS I read someone state that it was not a regularly necessary funciton first... I don't really know what kind of work they do, but I need it every day!

• WTVConverter problem with multiple audio streams...

  The WTVConverter MSFT includes Windows 7 does not correctly handle multiple audio streams. The WTVConverter in the conversion of the format ".wtv' to '.dvrms' instead of keep the main audio stream retains the other stream audio visually impaired. Usually, he keeps the other stream audio visually impaired. NCIS and NCIS Los Angeles, CBS programs have this problem because they include signals SAP (accessibility for blind and partially sighted options)

  How can I tell WTVConverter to include only the main audio instead of the stream audio visually impaired

  Thank you

  Chandra

  Hello, Chandra

  If you think that there should be an option to select a stream when converting, you can leave your comments on the following link:http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  In addition, you can try searching for a free replacement program convert WTV files.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• No sound! Driver of Bus Audio HDA required, not found

  I recently re-installed Windows XP on my computer Dell Dimension desktop and downloaded every update is available from Windows Update. All right, except that I have no sound.  In the device manager under "Other devices" with a yellow question mark is multimedia Audio Controller.  I know that I need the ADI 198 x integrated Audio driver I can get from the manufacturer's website, but when I try to download it I get the following error:

  Driver of Bus Audio HDA required, not found

  I have tried everything to solve this problem, including the automatic adjustment on this site (which has not detected a problem) AND download a patch for Windows XP, which is available here: http://support.microsoft.com/kb/888111.  The problem is that there is no fix for XP with Service Pack 3 users! At this point, I am at my wits end and nothing seems to work.  I appreciate any help you could give me. It feels like I tried all the solutions, but I'm open for anything at this point. Thank you!

  If you will forgive the play on words, using MS Update is not the way the most up to date to get the latest drivers for your audio device.

  You go directly to the Dell support site and get your machine of Dimension, and then download the necessary drivers. If you get an error message during the installation you may have inadvertently downloaded the wrong driver.

  Try again or re-post giving Dell Dimension model number.

  See you soon,.

  Jerry

• HDA Audio Bus required and not found

  Hello, I have an IBM T60 running on Windows XP Pro. I just deleted from my computer and noticed that the noise was gone. I currently have no audio device installed, according to the sound properties. I'm going to install the driver and rises an error, "HDA Audio Bus required and not found."

  Help, please!

  Hi Ricecommando,

  You can follow the steps in this link and check if it helps.

  DRIVER FOUND HDA AUDIO BUS

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• How to enable multiple audio output on Windows 7? Speaker and headphones play audio different...

  How to enable multiple audio output on Windows 7?  In Vista and XP it did automatically... I'm running Media center and Media player at the same time.  And plugged in a USB headset.  Media Player will automatically play through the headset and Media Center will go to the speakers.

  Why this feature is LEFT?

  Hi jibberz

  Welcome to the Microsoft Answers Forum!

  Unfortunately, several audio output is not a supported feature in Windows 7.  You may, however, check with the manufacturer of material for possible programs for that purpose.

  To work around the problem, try the steps listed in the link below and check: http://social.technet.microsoft.com/Forums/en-US/w7itprogeneral/thread/b1d1acac-1f21-4d23-8d68-98964d67c2c7

  For any comments, you can see the link: https://connect.microsoft.com/

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I register multiple audio clips (short) in a single long audio clip in first Pro CS5?

  Hello

  The question is in the title, but I wonder how I can join multiple audio clips (short) in a single audio clip in PP CS5.5 long.  I put all my short clips just next to each other and selected all to see what options are available by clicking and using the options on the toolbar at the top.  The closest I got was to nest sequence, but not what I really want.

  I want to merge all of the short videos in a single audio file (long) to use under the video.

  Thoughts are welcome and much appreciated.

  Thank you

  -Melvin

  O.K. This is the kind of basic and you will need to learn until on it fully... .but for now...

  Make sure you have the WAB (work area bar) which covers the length of the audio clips. (You don't need to choose)

  Go to the file Menu > export media

  You will receive all the Export Options.  Select the Wave file

  Select the option to export the work area.

  Choose a location to export the file to (location HD)

  Follow your nose from there...

  ....

  http://TV.Adobe.com/watch/learn-Premiere-Pro-CS5/exporting-with-Adobe-Media-Encoder/

  BTW - Why are you taking the audio to the Audition anyway? What are you going to do for her.

• Multiple audio files in a single slide Captivate 5?

  It is easy to add multiple audio files in Camtasia Studio: just drag gthem.

  Captivate 5 asks me if I want to replace the current audio file. I don't. I just need - at the most - you short audio files that will play in order, perhaps with a short break between the two

  Is this possible?

  Welcome to our community

  Captivate allows audio at three levels.

  • Background - plays for the duration of the project
  • Slide - plays when the slide plays
  • Object - plays when the object appears

  What you must do if you want multiple audio files to read is to insert objects and associate audio with objects. If you do not want to see the object and all what you want to do is to hear the audio, use a Transparent caption with no text or a box to highlight without color or a box click with no break and no action when you click it.

  See you soon... Rick

  Useful and practical links Begin to learn Captivate 5 times now! $29.95 Captivate wish form/Bug report form Certified Adobe Captivate training SorcererStone blog Captivate eBooks

• Creating a bar of the Volume control for multiple audio files

  I'm pretty new to Flash and developing a project with a series of images containing unique video clips. Each of these frameworks are accessible via a menu based all chapter in being visible straight like a regular movie. I just added the audio for each 'chapter' / framework, all of which are unique from each other. I'm having a problem with the creation of a volume control bar that affects all the sound elements throughout all the images in the control bar unique on the General interface/skin that these chapters are working on. (With the help of Flash 8)
  
  I developed a sliding control bar, that works, but does not affect the volume, somehow. Is there something wrong with the coding that I use? (The control bar consists of a button nested in a clip and the action is applied to the mc. The bar/line to follow is 60px banner for a long time and control is to move horizontally while the increase reflects the increase in the volume. The original code was for a 100px line leave a tutorial from macromedia that I adjusted to be 60px banner) advice on best practices for the creation of a volume control bar would be greatly appreciated! (I currently have all of my audio files on separate layers, should I be placing these in a mc rather than just having them on the main timeline?) Thank you!!!
  
  

  Answering my own question...

  Each individual swf has the code...

  var my_sound:Sound = new Sound();
  my_sound.loadSound ("someSound.mp3", true);
  my_sound.setVolume (50);

  Code on the shell/main drag...

  OBJECT SOUND
  var sound: Sound = new Sound;
  soundtrack.setVolume (50);
  END OF THE SOUND OBJECT

  GLOBAL VOLUME CONTROL
  var nVolCheck:Number;
  volSlider.volBall.onPress = function (): Void {}
  this.startDrag (false, 0, 0, 0, 75);
  nVolCheck = setInterval (updateVolume, 150);
  };
  volSlider.volBall.onRelease = function (): Void {}
  this.stopDrag ();
  clearInterval (nVolCheck);
  };
  function updateVolume (): Void {}
  var flight: Number = (volSlider.volBall._x) * 2;
  soundtrack.setVolume (flight);
  };
  END OF THE GLOBAL VOLUME CONTROL

  My bar is 75 pixels in width and volume is being increased from 1.5 to peak.