Multiple Instances of the Application to access the same DAQ hardware

Similar Questions

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How to prevent a user from opening multiple instances on the same computer?

  On site oldnavyweekly.com , there is a .swf which prevents users to open multiple instances of the site at the same time on the same computer. If you open the site and try to open it again in another window, it will not load. Cannot open the site again until the first window is closed. How did they implement this?
  My analysis, that is NOT:
  1. cookies - the block always takes place if you try to open it in Internet Explorer and also try to open it in Firefox at the same time.
  2 flash Cookies - the block always takes place if I disable flash cookies.
  3 IP Based Block - you are not blocked if you open the site on two separate computers with the same outgoing IP address. From my analysis, their server does not help in the block at all.
  It seems as if their .swf creates a sort of object throughout the global system which can be detected in other instances of the application on the same computer. How did they implement this?
  Thank you!

  use localconnection.  everyone has a localconnection to send and a receiving localconnection.  the lc reception closes the current application.

• Use of multiple instances of the same browser...

  Hi people,
  
  I have a question...
  I inherited a large APEX application, it uses Oracle SSO to log.
  
  We are migrating the application to a new set of servers and run regression tests.
  Testers are connecting using IE6 and multiple instances of the application both on the oldTest newTest servers and opening.
  
  If at some point, you can:

  an application Admin user (username ADMINTEST123)  logged into the application on oldTest
  an application Admin user (username ADMINTEST123)  logged into the application on newTest
  
  an application standard user (username TEST123)  logged into the application on oldTest
  an application standard user (username TEST123)  logged into the application on newTest

  Is this supported?
  
  Could someone tell me or direct me to the documentation or the thread that lists which is supported / unsupported for use of browser with APEX and SSO?
  
  Thanks in advance,
  Gus...

  So this can I conclude that what you say and the above results we could get questions if connection users and open new windows in this sense?

  Yes, if users connect or not, if requests for pages using the same session of apex are issued different browser instances, the results may be undesirable.

  Scott

• Can't swap multiple instances of the same symbol

  Hey!

  So, I can select a symbol and exchange with one another, but why can't I just Exchange several instances of the same symbol?

  A useless limitation don't y ' All think?

  -Dwayne

  If you're talking about the replacement of one symbol by another of the library, which is limited to one symbol at a time.  But you can extend this functionality using JSFL.  Here is a link to a tool that might work for you...

  http://spiralstormgames.com/blog/code-snippets/quick-Flash-extension-swap-multiple-element s-at-once.

  If you have a thousand things to change, you can review your design uses a dynamic approach, except the investment items must be managed manually defined specific locations.   In this way, you can simply change the link between the symbol and the programming will take care of the rest.

• Can VMware Player run multiple instances of the same VM?

  I looked around but could find an answer to this question. If it has already been answered, please feel free to point me to that answer. I am relatively new to VMware Player, so this may seem like a stupid question. Please bear with me.

  I've been running Linux in a virtual machine using VMware Player 5.0.2 on Win7 and I would like to start another instance of the same virtual machine, simultaneously. When I try to launch the image once again, VMware asks if I want to take possession of the virtual machine running, but does not give the opportunity to start another instance.

  Is it because it is not possible to run two instances of the same VM, or y at - it another way to get there?

  Welcome to the community,

  This can be done. If another instance would be allowed to use the same file system, the guest operating system would be very likely corrupt the file system. What is possible - at least with VMware Workstation - is to create clones related, where the Basic virtual disk is the same (open in read-only mode), but writes go to independent virtual disk files.

  André

• Multiple instances of the same symbol of edition

  Hi, was looking for a solution to this for a while, did not a straight answer yet. So I hope you guys can help.

  For a game of Hangman-esque I have a flash document (with CS5, but that probably doesn't matter) who has (or will have rather) a library of 26 clips that will contain a letter of the alphabet every.

  They will be inside their own dynamic text box, so I am able to change the font, background color etc at will.

  But it is even possible to edit multiple instances of a clip on the stage at the same time, without being too complex?

  In other words can I put several A, B, C etc. on the stage and get all change at the same time if someone guesses a letter?

  I know you can change instances unique of a clip, but for that you must give a name to each instance and I don't know how many of each letter I would be put on the stage, let alone how I could easily access.

  It could perhaps through classes or something? I've not really covered before if.

  Feel free to ask for more details... I admit that some I have things I write can be a little vague...

  Yes, a table that contains references to all the clips that are related functionally and when you manipulate them - loop in table and change all what you need to change on the table instances.

  I don't know what you want to learn more on...

• Unique VO shared by multiple instances of the same taskflow

  Hello Experts,

  Need your expert opinion to this problem. I have a VO that is used to display the details of the master-child table on page jsff (say it as a Page of country-state).

  The user comes to the jsff by taskflow launch page, passing a search results table (say it as countries search result). I have provided hypertext links in the table of countries so the user can click on the name of country and go to the country-state page.

  Occurs when the user clicks on the links from different countries and thus to open several pages of country-state jsff. In this case, all the pages pointing to the same country-state record.

  Example; Search country table has three rows - India, China, Japan. User clicked on the India, China and Japan of the Web links provided in the table. He opened 3 pages of the table of State of the country. But all these pages show details of the Japan as he was finally activated.

  I'm new to ADF and it's the first assignment . I learned and put in place through blogs on the internet but stuck here now.

  Appreciate any help.

  PS - I've seen a few articles mentioning to create multiple instances of VO, but my problem is that I don't know how many instances of create. Because it depends on how many times users click on hyperlink and launch taskflow.

  Kind regards

  Newbie

  This is not a property of the vo but the workflow. Please watch this http://www.youtube.com/watch?v=SHfilCAVzTs video that shows the concept.

  Timo

• multiple instances of the same Subvi in the public Service

  Hiall,

  I found the interesting feature that I can't diplay panels before subVIs in sub-panels in front of my main VI and so far, it works fine:

  

  Here, I have 4 screws tracing data and all their facades displayed on the main VI. They are called by some intermediary VI which in turn is called from the main VI.

  now, since these parcel 4 screws are the same, I'm looking for something like this:

  

  How can I get the 4 instance references? the ref 'this VI' is the same for the 4 cases, I checked. I put it on preallouee environment.

  Thank you much for the help!

  If you share your code, it would be much easier to show you. I think you should use the function Open Ref VI with a shred of option 0x08 to run environment. Open 4 different refs and you should have 4 different memory spaces.

  You will have to pass these references in your intermediate VI and the call by reference to run with the right input.

• Multiple instances of the same audio clip increase the size of the file?

  By example, if the same audio clip is placed on layers separated five as opposed to one (5 v 1)?

  Does not Flash "dedupe"?

  No, they do not increase the size of file significantly.  That is to say, the assistance of 100 cases of a noise could increase the file size of 1 KB on a single instance because noise of no added 100 times at the end of file, just the necessary info to indicate where it should play in the timeline or in your actionscript code.

• dynamically generate multiple instances of the same subform

  I have the field box where the user can select up to 10 accounts.  For each account, I need to have a certain display subform.  So if the user selects 5 accounts need 5 occurrences of the same subform.

  Is it possible by programming?  Or do I have to have 10 subforms and just hide/show what I need?  I prefer the former, if can be done.

  Please advise,

  Thank you

  Elaine

  Of course, it is not too hard once you know what you're doing.  First of all, make sure that all subforms of 'parent' of your subform are defined to be "Flowed" in the object tab, and that your subform is set to "repeat subform for each data element" in the binding tab.  For example, your user enters the number of accounts they have in a numeric field or text (we'll call it Number_of_Accounts).  At this point, you might have the form to generate the number of instances of the subform you want when the user leaves this area, or you could have a button that says something like "generate accounts."  Whatever it is, your script will be something like this:

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  This will generate the number of instances of the requested subform.  A warning-if the person changes the value of Number_of_Accounts after they put a (i.e. in a first step, they said 5 but then it changed to 3), the instances at the end to go (so in our example the 4th and 5th instances would be deleted).  I suggest putting a warning in the same place, you put the script above, so it will look like

  If (_Accounts_Subform.count > Number_of_Accounts.rawValue) {}

  If (xfa.host.messageBox ("attention! You are about to permanently delete all accounts after the number"+ Number_of_Accounts.rawValue +".. "  Are you sure you want to continue? ', ' danger! "(, 3, 2) (= 4) {}".

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  else {}

  Number_of_Accounts.RawValue = _Accounts_Subform.count

  }
  }

  else {}

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  In addition, I suggest putting a delete button with each instance of the subform, so they can remove a case at a time and specifically (i.e. delete the first instance without deleting all subsequent instances).  A start-up caution-make sure that your "addresses" are correct (in this case Accounts_Subform and Number_of_Accounts).  If you are not sure if an address is correct, select the object on which you are scripting, go in the script editor, hold down Ctrl, and click in Design view, on the object you are trying to reference.  I'm sorry if this is not clear, but I can't imagine a better way to explain this right now.

• Multiple Instances of the same vCenter Server listed

  I uninstalled and then reinstalled the installer of VMware vFoglight for agents of collector/connector on my vCenter server. It is now listed twice in my console vFoglight. How can I delete the duplicate entry?

  Hi Gerry. There is an option to remove the old date within the FMS. Vizioncore gave me a doc that explains it.
  in the left menu, go to foglight-> servers-> data-> vmware model management
  Here, you can select the vc to remove... but be careful with what you remove! Make sure that the right vc :-)
  If you led the whole tree and restart the service of Fogle, it should disappear... give fms a few minutes to delete (depends on the size of the data) before restarting the service... cheers, patrik
  Sorry... didn't scroll down... I didn ' see that there is already a... pat post

• How to avoid creating multiple instances of the application?

  Hello

  We have a user interface Application. The application has been set to Auto run at startup and as a Module system.

  The application has a file listener that checks all new emails.

  When we start the application from the user interface by clicking on the application icon, it seems that the multiple instance of the application is created. For this reason when send us an email to request it is receiving emails several times. Sometimes simple, double and sometimes even five times.

  public class MyApplication  extends UiApplication implements FolderListener,
          SystemListener, GlobalEventListener {
  
      // Boot
      public static void main(String[] args) {
          if (args != null && args.length > 0 && args[0].equals("gui")) {
              // code to initialize the app
              fromService = false;
              // register the notification
              Notification n = new Notification();
              n.registerNotificationObjects();
  
              Utilities.writeLog(GUID, "MyApplication GUI Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          } else {
              Utilities.writeLog(GUID, "OnBoardV2 Service Starting up");
              MyApplication service = new MyApplication();
              service.enterEventDispatcher();
          }
      }
  
      public void messagesAdded(FolderEvent e) {
          /// Receive messages
          }   
  
  }
  

  In this regard, any help will be apreciated!

  Thank you

  I don't know if it's your entire code, but if you register your application as a file time listener never, it is called, then you save several headphones. The listener does not cause deleted your app closes, you must explicitly remove the listener. You must either put the listener in its own class and only sign up to start or find a way to check if the listener is already registered whenever the application is called.

• OAM - map multiple URLS for the same web application

  Is OAM, posible to map multiple URLS to the same web application? When the user access to a different URL, it passes to the same application but set up with different strategy?

  In this case, this is the scenario that describes ROISSAC - as he says OAM cannot protect the same resource with two different strategies.

  Perhaps you could do this at the level of the network - if the two companies access the application through different proxy servers, you can use different identifiers to host for the two WebGates on proxy servers. This solution is easier to apply when there is a physical separation of users (for example, the internal/external users) rather than different users coming through the same path.

  Kind regards
  Colin

• Can I install multiple instances of the Adobe PDF printer driver?

  Our application allows printing to be directed to different folders depending on the document to print.  However, the Adobe printer driver printing preferences requires that the file to a specific location, then keep all the documents in a folder.  Is it possible to have multiple instances of the printer, for example Adobe PDF 1, Adobe PDF 2 driver with output folder set to a different location for each driver, or y at - it an easier way to specify output files?

  Thank you

  (Instructions for XP Pro and Acrobat 8.0)

  Open the Printers folder and click Add a printer.

  Click Next on the Welcome screen

  Select "Local printer attached to this computer", uncheck automatically detect and install my Plug and Play printer, click Next

  Click on create a new port, select "Adobe PDF Port" in the list, click Next

  Select the folder that you want the PDF file stored in, click OK

  The printer software install screen click on disk

  Click the Browse button, then go to "Program Adobe 8.0\Acrobat\xtras\AdobePDF" (may be different for your configuration)

  Select the AdobePDF.inf (English version), and then click OK

  Select the Adobe's PDF Converter (there may be several in the list, I always choose the top) and click Next

  If the dialog use pilot existing if poster click on "Keep the existing driver" click Next

  Name of the printer or Adobe PDF 1, click Next

  Set options for sharing, printing a page of test if you want and finish.

  Now, when you print to this printer from an application, it will create the PDF file in the specified folder

  You can repeat this process for a number of outputs.

  Hope this helps