Multiple instances of the same symbol of edition

Similar Questions

• Can't swap multiple instances of the same symbol

  Hey!

  So, I can select a symbol and exchange with one another, but why can't I just Exchange several instances of the same symbol?

  A useless limitation don't y ' All think?

  -Dwayne

  If you're talking about the replacement of one symbol by another of the library, which is limited to one symbol at a time.  But you can extend this functionality using JSFL.  Here is a link to a tool that might work for you...

  http://spiralstormgames.com/blog/code-snippets/quick-Flash-extension-swap-multiple-element s-at-once.

  If you have a thousand things to change, you can review your design uses a dynamic approach, except the investment items must be managed manually defined specific locations.   In this way, you can simply change the link between the symbol and the programming will take care of the rest.

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How to prevent a user from opening multiple instances on the same computer?

  On site oldnavyweekly.com , there is a .swf which prevents users to open multiple instances of the site at the same time on the same computer. If you open the site and try to open it again in another window, it will not load. Cannot open the site again until the first window is closed. How did they implement this?
  My analysis, that is NOT:
  1. cookies - the block always takes place if you try to open it in Internet Explorer and also try to open it in Firefox at the same time.
  2 flash Cookies - the block always takes place if I disable flash cookies.
  3 IP Based Block - you are not blocked if you open the site on two separate computers with the same outgoing IP address. From my analysis, their server does not help in the block at all.
  It seems as if their .swf creates a sort of object throughout the global system which can be detected in other instances of the application on the same computer. How did they implement this?
  Thank you!

  use localconnection.  everyone has a localconnection to send and a receiving localconnection.  the lc reception closes the current application.

• Use of multiple instances of the same browser...

  Hi people,
  
  I have a question...
  I inherited a large APEX application, it uses Oracle SSO to log.
  
  We are migrating the application to a new set of servers and run regression tests.
  Testers are connecting using IE6 and multiple instances of the application both on the oldTest newTest servers and opening.
  
  If at some point, you can:

  an application Admin user (username ADMINTEST123)  logged into the application on oldTest
  an application Admin user (username ADMINTEST123)  logged into the application on newTest
  
  an application standard user (username TEST123)  logged into the application on oldTest
  an application standard user (username TEST123)  logged into the application on newTest

  Is this supported?
  
  Could someone tell me or direct me to the documentation or the thread that lists which is supported / unsupported for use of browser with APEX and SSO?
  
  Thanks in advance,
  Gus...

  So this can I conclude that what you say and the above results we could get questions if connection users and open new windows in this sense?

  Yes, if users connect or not, if requests for pages using the same session of apex are issued different browser instances, the results may be undesirable.

  Scott

• Creation of multiple versions of the same symbol

  I am currently using Adobe Flash CC on my macbook pro. I am trying to create different versions of a symbol. The one I have now has a walk cycle. If I duplicate symbol and start working with it, the changes that I have to him affect the original! How can I make different versions and chronology with the same symbol without them affecting one another? I need to know as soon as POSSIBLE, because it is a project.

  Right click on the symbol in the library and click on duplicate.  This will create a symbol that can be modified independently of the original.

• Can VMware Player run multiple instances of the same VM?

  I looked around but could find an answer to this question. If it has already been answered, please feel free to point me to that answer. I am relatively new to VMware Player, so this may seem like a stupid question. Please bear with me.

  I've been running Linux in a virtual machine using VMware Player 5.0.2 on Win7 and I would like to start another instance of the same virtual machine, simultaneously. When I try to launch the image once again, VMware asks if I want to take possession of the virtual machine running, but does not give the opportunity to start another instance.

  Is it because it is not possible to run two instances of the same VM, or y at - it another way to get there?

  Welcome to the community,

  This can be done. If another instance would be allowed to use the same file system, the guest operating system would be very likely corrupt the file system. What is possible - at least with VMware Workstation - is to create clones related, where the Basic virtual disk is the same (open in read-only mode), but writes go to independent virtual disk files.

  André

• Unique VO shared by multiple instances of the same taskflow

  Hello Experts,

  Need your expert opinion to this problem. I have a VO that is used to display the details of the master-child table on page jsff (say it as a Page of country-state).

  The user comes to the jsff by taskflow launch page, passing a search results table (say it as countries search result). I have provided hypertext links in the table of countries so the user can click on the name of country and go to the country-state page.

  Occurs when the user clicks on the links from different countries and thus to open several pages of country-state jsff. In this case, all the pages pointing to the same country-state record.

  Example; Search country table has three rows - India, China, Japan. User clicked on the India, China and Japan of the Web links provided in the table. He opened 3 pages of the table of State of the country. But all these pages show details of the Japan as he was finally activated.

  I'm new to ADF and it's the first assignment . I learned and put in place through blogs on the internet but stuck here now.

  Appreciate any help.

  PS - I've seen a few articles mentioning to create multiple instances of VO, but my problem is that I don't know how many instances of create. Because it depends on how many times users click on hyperlink and launch taskflow.

  Kind regards

  Newbie

  This is not a property of the vo but the workflow. Please watch this http://www.youtube.com/watch?v=SHfilCAVzTs video that shows the concept.

  Timo

• multiple instances of the same Subvi in the public Service

  Hiall,

  I found the interesting feature that I can't diplay panels before subVIs in sub-panels in front of my main VI and so far, it works fine:

  

  Here, I have 4 screws tracing data and all their facades displayed on the main VI. They are called by some intermediary VI which in turn is called from the main VI.

  now, since these parcel 4 screws are the same, I'm looking for something like this:

  

  How can I get the 4 instance references? the ref 'this VI' is the same for the 4 cases, I checked. I put it on preallouee environment.

  Thank you much for the help!

  If you share your code, it would be much easier to show you. I think you should use the function Open Ref VI with a shred of option 0x08 to run environment. Open 4 different refs and you should have 4 different memory spaces.

  You will have to pass these references in your intermediate VI and the call by reference to run with the right input.

• Multiple instances of the same audio clip increase the size of the file?

  By example, if the same audio clip is placed on layers separated five as opposed to one (5 v 1)?

  Does not Flash "dedupe"?

  No, they do not increase the size of file significantly.  That is to say, the assistance of 100 cases of a noise could increase the file size of 1 KB on a single instance because noise of no added 100 times at the end of file, just the necessary info to indicate where it should play in the timeline or in your actionscript code.

• dynamically generate multiple instances of the same subform

  I have the field box where the user can select up to 10 accounts.  For each account, I need to have a certain display subform.  So if the user selects 5 accounts need 5 occurrences of the same subform.

  Is it possible by programming?  Or do I have to have 10 subforms and just hide/show what I need?  I prefer the former, if can be done.

  Please advise,

  Thank you

  Elaine

  Of course, it is not too hard once you know what you're doing.  First of all, make sure that all subforms of 'parent' of your subform are defined to be "Flowed" in the object tab, and that your subform is set to "repeat subform for each data element" in the binding tab.  For example, your user enters the number of accounts they have in a numeric field or text (we'll call it Number_of_Accounts).  At this point, you might have the form to generate the number of instances of the subform you want when the user leaves this area, or you could have a button that says something like "generate accounts."  Whatever it is, your script will be something like this:

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  This will generate the number of instances of the requested subform.  A warning-if the person changes the value of Number_of_Accounts after they put a (i.e. in a first step, they said 5 but then it changed to 3), the instances at the end to go (so in our example the 4th and 5th instances would be deleted).  I suggest putting a warning in the same place, you put the script above, so it will look like

  If (_Accounts_Subform.count > Number_of_Accounts.rawValue) {}

  If (xfa.host.messageBox ("attention! You are about to permanently delete all accounts after the number"+ Number_of_Accounts.rawValue +".. "  Are you sure you want to continue? ', ' danger! "(, 3, 2) (= 4) {}".

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  else {}

  Number_of_Accounts.RawValue = _Accounts_Subform.count

  }
  }

  else {}

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  In addition, I suggest putting a delete button with each instance of the subform, so they can remove a case at a time and specifically (i.e. delete the first instance without deleting all subsequent instances).  A start-up caution-make sure that your "addresses" are correct (in this case Accounts_Subform and Number_of_Accounts).  If you are not sure if an address is correct, select the object on which you are scripting, go in the script editor, hold down Ctrl, and click in Design view, on the object you are trying to reference.  I'm sorry if this is not clear, but I can't imagine a better way to explain this right now.

• Multiple Instances of the same vCenter Server listed

  I uninstalled and then reinstalled the installer of VMware vFoglight for agents of collector/connector on my vCenter server. It is now listed twice in my console vFoglight. How can I delete the duplicate entry?

  Hi Gerry. There is an option to remove the old date within the FMS. Vizioncore gave me a doc that explains it.
  in the left menu, go to foglight-> servers-> data-> vmware model management
  Here, you can select the vc to remove... but be careful with what you remove! Make sure that the right vc :-)
  If you led the whole tree and restart the service of Fogle, it should disappear... give fms a few minutes to delete (depends on the size of the data) before restarting the service... cheers, patrik
  Sorry... didn't scroll down... I didn ' see that there is already a... pat post

• Parameters for the single instance of DCOM for multiple users on the same machine

  I have a DCOM on a Windows 2008 R2, Enterprise Edition machine. I would like to be able to open an instance of the DCOM and have it accessible by multiple users on the same machine, i.e. users connected to Windows accounts.

  What settings will do? In the tab 'identity' in dcomconfg for my DCOM object settings, I tried "interactive user", 'the user running' and 'this user', all three lead to the same result: start a new instance DCOM on easch Windows of the connected customer accounts, despite the existence of bodies being already running on other accounts. This baffles me, especially with the third alternative, 'this user', which should certainly lead to all proceedings being started by this specific account? This is not the case. Any help would be appreciated!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Multiple Instances of the Application to access the same DAQ hardware

  I have a relatively simple application that reads from a device of data acquisition (OR-9205 connected to NI WLS-9163) wireless.  I would like to run multiple instances of the executable, but I get the error-201105 (resource reserved) as soon as the DAQmx task starts on the second instance.  Each instance tries to acquire different channels of the same DAQ hardware.  Is this a problem with the data acquisition device, or DAQmx in general?  Thank you.

  -Joe

  Hey Joe,

  Unfortunately, you can only one type of access channel with each program.  For example, you might HAVE a program access and another use AO, but you can't have two programs different AI the same access card.  It is common among all of the DAQ hardware to NEITHER.

• Multiple sites using the same instance of CF?

  Hi Gang-
  I have a client who has recently improved CF Pro to Enterprise and they use in a relatively simple way as an intranet. They would like to help me configure a second instance for the purpose of a staging server, but I noticed after they revealed they do not have the link of Enterprise Manager in their CF Admin screen.
  
  They need to reinstall CF using the MultiServer installation version to be able to deploy a second instance of CF? Need to uninstall and reinstall? Ugh...
  
  Can't they just create a second site under their web server, using a different port and you worry about the second instance of CF? Best practices for a moment, remember, they do not necessarily expand on this server, it is intended to be a staging server.
  
  Any ideas on the best and fastest way to handle this?
  
  Many thanks in advance,
  Rich

  Many questions, many answers. :-)

  Yes, rich, they would need to install the version multiserver for you to see this Enterprise Manager option in the CF Admin. But no, they would not need to uninstall the server deployment (what you did) to add to the MultiServer deployment. They can coexist (although it is not something most would do in general).

  The best news for you is that, Yes, they can indeed just set up a second site on their web server, and who also point to the deployment server CF one you have installed. It is, of course, assuming that they are running a web server that supports multiple sites. If it's Apache, you're good. If this is Windows, then as long as the Windows Server 2003 (or 2008 or Vista), you're good, too. (Just to be complete, for other readers, XP does not allow you run multiple sites at the same time.)

  If during the installation of the CF tells you that there all sites on the web server with CF, you need do nothing again create site. It should be immediately able to run pages CF. If you said that it is in CF link to a site, then you will need run the server web Configurator again. You can do it manually, even after installation. See the CF Admin and Config docs to learn more about it, as well as on this issue. (I know many like to just run things and hope that the interface is pretty clear, but as this issue shows, for some things anyone installing CF will be well served by looking at this collection of Miss often.)

  Hope that helps, Rich. It is not a RTFM response. :-) Suffice it to say that if you need more that what I said, it's in the manual. Yet, I am happy to answer follow up if I can.