Multiple Instances of the same vCenter Server listed

Similar Questions

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• How to prevent a user from opening multiple instances on the same computer?

  On site oldnavyweekly.com , there is a .swf which prevents users to open multiple instances of the site at the same time on the same computer. If you open the site and try to open it again in another window, it will not load. Cannot open the site again until the first window is closed. How did they implement this?
  My analysis, that is NOT:
  1. cookies - the block always takes place if you try to open it in Internet Explorer and also try to open it in Firefox at the same time.
  2 flash Cookies - the block always takes place if I disable flash cookies.
  3 IP Based Block - you are not blocked if you open the site on two separate computers with the same outgoing IP address. From my analysis, their server does not help in the block at all.
  It seems as if their .swf creates a sort of object throughout the global system which can be detected in other instances of the application on the same computer. How did they implement this?
  Thank you!

  use localconnection.  everyone has a localconnection to send and a receiving localconnection.  the lc reception closes the current application.

• Use of multiple instances of the same browser...

  Hi people,
  
  I have a question...
  I inherited a large APEX application, it uses Oracle SSO to log.
  
  We are migrating the application to a new set of servers and run regression tests.
  Testers are connecting using IE6 and multiple instances of the application both on the oldTest newTest servers and opening.
  
  If at some point, you can:

  an application Admin user (username ADMINTEST123)  logged into the application on oldTest
  an application Admin user (username ADMINTEST123)  logged into the application on newTest
  
  an application standard user (username TEST123)  logged into the application on oldTest
  an application standard user (username TEST123)  logged into the application on newTest

  Is this supported?
  
  Could someone tell me or direct me to the documentation or the thread that lists which is supported / unsupported for use of browser with APEX and SSO?
  
  Thanks in advance,
  Gus...

  So this can I conclude that what you say and the above results we could get questions if connection users and open new windows in this sense?

  Yes, if users connect or not, if requests for pages using the same session of apex are issued different browser instances, the results may be undesirable.

  Scott

• Can't swap multiple instances of the same symbol

  Hey!

  So, I can select a symbol and exchange with one another, but why can't I just Exchange several instances of the same symbol?

  A useless limitation don't y ' All think?

  -Dwayne

  If you're talking about the replacement of one symbol by another of the library, which is limited to one symbol at a time.  But you can extend this functionality using JSFL.  Here is a link to a tool that might work for you...

  http://spiralstormgames.com/blog/code-snippets/quick-Flash-extension-swap-multiple-element s-at-once.

  If you have a thousand things to change, you can review your design uses a dynamic approach, except the investment items must be managed manually defined specific locations.   In this way, you can simply change the link between the symbol and the programming will take care of the rest.

• Can VMware Player run multiple instances of the same VM?

  I looked around but could find an answer to this question. If it has already been answered, please feel free to point me to that answer. I am relatively new to VMware Player, so this may seem like a stupid question. Please bear with me.

  I've been running Linux in a virtual machine using VMware Player 5.0.2 on Win7 and I would like to start another instance of the same virtual machine, simultaneously. When I try to launch the image once again, VMware asks if I want to take possession of the virtual machine running, but does not give the opportunity to start another instance.

  Is it because it is not possible to run two instances of the same VM, or y at - it another way to get there?

  Welcome to the community,

  This can be done. If another instance would be allowed to use the same file system, the guest operating system would be very likely corrupt the file system. What is possible - at least with VMware Workstation - is to create clones related, where the Basic virtual disk is the same (open in read-only mode), but writes go to independent virtual disk files.

  André

• Unique VO shared by multiple instances of the same taskflow

  Hello Experts,

  Need your expert opinion to this problem. I have a VO that is used to display the details of the master-child table on page jsff (say it as a Page of country-state).

  The user comes to the jsff by taskflow launch page, passing a search results table (say it as countries search result). I have provided hypertext links in the table of countries so the user can click on the name of country and go to the country-state page.

  Occurs when the user clicks on the links from different countries and thus to open several pages of country-state jsff. In this case, all the pages pointing to the same country-state record.

  Example; Search country table has three rows - India, China, Japan. User clicked on the India, China and Japan of the Web links provided in the table. He opened 3 pages of the table of State of the country. But all these pages show details of the Japan as he was finally activated.

  I'm new to ADF and it's the first assignment . I learned and put in place through blogs on the internet but stuck here now.

  Appreciate any help.

  PS - I've seen a few articles mentioning to create multiple instances of VO, but my problem is that I don't know how many instances of create. Because it depends on how many times users click on hyperlink and launch taskflow.

  Kind regards

  Newbie

  This is not a property of the vo but the workflow. Please watch this http://www.youtube.com/watch?v=SHfilCAVzTs video that shows the concept.

  Timo

• Multiple instances of the same symbol of edition

  Hi, was looking for a solution to this for a while, did not a straight answer yet. So I hope you guys can help.

  For a game of Hangman-esque I have a flash document (with CS5, but that probably doesn't matter) who has (or will have rather) a library of 26 clips that will contain a letter of the alphabet every.

  They will be inside their own dynamic text box, so I am able to change the font, background color etc at will.

  But it is even possible to edit multiple instances of a clip on the stage at the same time, without being too complex?

  In other words can I put several A, B, C etc. on the stage and get all change at the same time if someone guesses a letter?

  I know you can change instances unique of a clip, but for that you must give a name to each instance and I don't know how many of each letter I would be put on the stage, let alone how I could easily access.

  It could perhaps through classes or something? I've not really covered before if.

  Feel free to ask for more details... I admit that some I have things I write can be a little vague...

  Yes, a table that contains references to all the clips that are related functionally and when you manipulate them - loop in table and change all what you need to change on the table instances.

  I don't know what you want to learn more on...

• multiple instances of the same Subvi in the public Service

  Hiall,

  I found the interesting feature that I can't diplay panels before subVIs in sub-panels in front of my main VI and so far, it works fine:

  

  Here, I have 4 screws tracing data and all their facades displayed on the main VI. They are called by some intermediary VI which in turn is called from the main VI.

  now, since these parcel 4 screws are the same, I'm looking for something like this:

  

  How can I get the 4 instance references? the ref 'this VI' is the same for the 4 cases, I checked. I put it on preallouee environment.

  Thank you much for the help!

  If you share your code, it would be much easier to show you. I think you should use the function Open Ref VI with a shred of option 0x08 to run environment. Open 4 different refs and you should have 4 different memory spaces.

  You will have to pass these references in your intermediate VI and the call by reference to run with the right input.

• Multiple instances of the same audio clip increase the size of the file?

  By example, if the same audio clip is placed on layers separated five as opposed to one (5 v 1)?

  Does not Flash "dedupe"?

  No, they do not increase the size of file significantly.  That is to say, the assistance of 100 cases of a noise could increase the file size of 1 KB on a single instance because noise of no added 100 times at the end of file, just the necessary info to indicate where it should play in the timeline or in your actionscript code.

• dynamically generate multiple instances of the same subform

  I have the field box where the user can select up to 10 accounts.  For each account, I need to have a certain display subform.  So if the user selects 5 accounts need 5 occurrences of the same subform.

  Is it possible by programming?  Or do I have to have 10 subforms and just hide/show what I need?  I prefer the former, if can be done.

  Please advise,

  Thank you

  Elaine

  Of course, it is not too hard once you know what you're doing.  First of all, make sure that all subforms of 'parent' of your subform are defined to be "Flowed" in the object tab, and that your subform is set to "repeat subform for each data element" in the binding tab.  For example, your user enters the number of accounts they have in a numeric field or text (we'll call it Number_of_Accounts).  At this point, you might have the form to generate the number of instances of the subform you want when the user leaves this area, or you could have a button that says something like "generate accounts."  Whatever it is, your script will be something like this:

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  This will generate the number of instances of the requested subform.  A warning-if the person changes the value of Number_of_Accounts after they put a (i.e. in a first step, they said 5 but then it changed to 3), the instances at the end to go (so in our example the 4th and 5th instances would be deleted).  I suggest putting a warning in the same place, you put the script above, so it will look like

  If (_Accounts_Subform.count > Number_of_Accounts.rawValue) {}

  If (xfa.host.messageBox ("attention! You are about to permanently delete all accounts after the number"+ Number_of_Accounts.rawValue +".. "  Are you sure you want to continue? ', ' danger! "(, 3, 2) (= 4) {}".

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  else {}

  Number_of_Accounts.RawValue = _Accounts_Subform.count

  }
  }

  else {}

  _Accounts_Subform.Count = Number_of_Accounts.rawValue;

  }

  In addition, I suggest putting a delete button with each instance of the subform, so they can remove a case at a time and specifically (i.e. delete the first instance without deleting all subsequent instances).  A start-up caution-make sure that your "addresses" are correct (in this case Accounts_Subform and Number_of_Accounts).  If you are not sure if an address is correct, select the object on which you are scripting, go in the script editor, hold down Ctrl, and click in Design view, on the object you are trying to reference.  I'm sorry if this is not clear, but I can't imagine a better way to explain this right now.

• Dblink Oracle to sql server, multiple database on the same server sql under a dblink

  Hi, we managed to set up an Oracle dblink to sql server and retrieve data.

  The user of sql server have been using via dblink has access to multiple databases on the same sql server

  But the question is how in oracle (if possible) prepend you the SQL access to this?

  For example:

  Sqlserver_prod has the user sqlserver_user which seems to be set up as default database sqlserver_db1

  But we have select access to sqlserver_db2

  all work well as sqlserver_user

  Select * from table_fromdb1

  Select * from dbo.table_fromdb1

  Select * from sqlserver_db1.dbo.table_fromdb1

  as does

  Select * from sqlserver_db2.dbo.table_fromdb2

  more in Oracle

  Oracle_db a dblink sqlserver_prod. World connection sqlserver_user

  everything works fine

  Select * from 'table_fromdb1"@sqlserver_prod '.

  Select * from 'dbo '. "table_fromdb1"@sqlserver_prod

  But how to (if possible) access from oracle

  sqlserver_db2.dbo.table_fromdb2

  without having to create a new sqlserver_db2_user referenced in a new dblink

  If oracle for oracle would be

  Select * from remote_oracle_schema.table@remote_oracle_db

  Hello

  You cannot select a table in a different SQL * database server from that to which the gateway instance connects.
  As stated in the documentation-

  Oracle® database gateway

  Installation and Configuration Guide

  11g Release 2 (11.2) for AIX 5 L Based Systems (64-bit), HP - UX

  Itanium, Solaris (SPARC 64-Bit), Linux x 86 operating system,

  and Linux x 86-64

  In the section.

  The example SQL Server multiple databases: Configuration of the modem router

  A separate instance of the gateway that is required for each SQL Server database. Each

  instance needs its own Gateway system ID (SID).

  ==========

  You will need to create a new instance of the gateway for the SQL * Server DB2 as well as a link separate db.

  Kind regards

  Mike

• the JRC, many cases can be on the same database server?

  and if so, that that the advantage of this would be, because there would be no tolerance of breakdowns or of load balancing in question?
  
  im just curious,
  
  Thank you

  I hope that this is just a rhetorical question. If we keep data and you want to start the instance on the same machine, the db_unique_name would do the trick, giving each one a different name. But in the cars, the instance name will change keeping the db_name even and also, the Vip would be alone for two instances. So no real advantage to do so would not be possible at all. No TAF or these things would be there because CARS is used for HA and when the only machine would come down, you would have lost everything. That said, I am always doubtful that you can even start multiple instances on the same computer even or not.

  Just my 2 cents.

  Aman...

• You can run several APEX headphones for different instances on the same server

  Please confirm that we can run several APEX headphones for different instances on the same server?  It is a configuration of xml configuration or do we need to do more?

  
  

  Thank you

  
  

  Tony Miller

  SmartDog Services

  Austin, TX
  

  Hello

  With last listener APEX, you can configure multiple databases

  Oracle Application Express listener configuration

  Is that what you mean?

  Kind regards
  Jari

• Multiple sites using the same instance of CF?

  Hi Gang-
  I have a client who has recently improved CF Pro to Enterprise and they use in a relatively simple way as an intranet. They would like to help me configure a second instance for the purpose of a staging server, but I noticed after they revealed they do not have the link of Enterprise Manager in their CF Admin screen.
  
  They need to reinstall CF using the MultiServer installation version to be able to deploy a second instance of CF? Need to uninstall and reinstall? Ugh...
  
  Can't they just create a second site under their web server, using a different port and you worry about the second instance of CF? Best practices for a moment, remember, they do not necessarily expand on this server, it is intended to be a staging server.
  
  Any ideas on the best and fastest way to handle this?
  
  Many thanks in advance,
  Rich

  Many questions, many answers. :-)

  Yes, rich, they would need to install the version multiserver for you to see this Enterprise Manager option in the CF Admin. But no, they would not need to uninstall the server deployment (what you did) to add to the MultiServer deployment. They can coexist (although it is not something most would do in general).

  The best news for you is that, Yes, they can indeed just set up a second site on their web server, and who also point to the deployment server CF one you have installed. It is, of course, assuming that they are running a web server that supports multiple sites. If it's Apache, you're good. If this is Windows, then as long as the Windows Server 2003 (or 2008 or Vista), you're good, too. (Just to be complete, for other readers, XP does not allow you run multiple sites at the same time.)

  If during the installation of the CF tells you that there all sites on the web server with CF, you need do nothing again create site. It should be immediately able to run pages CF. If you said that it is in CF link to a site, then you will need run the server web Configurator again. You can do it manually, even after installation. See the CF Admin and Config docs to learn more about it, as well as on this issue. (I know many like to just run things and hope that the interface is pretty clear, but as this issue shows, for some things anyone installing CF will be well served by looking at this collection of Miss often.)

  Hope that helps, Rich. It is not a RTFM response. :-) Suffice it to say that if you need more that what I said, it's in the manual. Yet, I am happy to answer follow up if I can.