Similar Questions

• Flash of the MacBook Pro 13 '' end 2012 expansion options

  I have a Macbook Pro 13 "end 2012 with 120 GB SSD and I'm looking to increase its storage capacity by using the extension flash connector." I want to buy the highest capacity and fastest flash memory, that I can find, but I am confused and scared to buy flash memory which is not compatible with my Mac. Someone would be kind enough to point out the best options? The more I read, more confused I get. Laughing out loud. Thank you.

  The expansion slot Flash is mainly for SD camera card connectivity.   Thunderbolt is a slot with many options for external storage.

• Go to bed before exhausted battery MacBook Pro retina (mid-2012)

  I hope that someone in the community can help with this question.

  I have a MacBook Pro (mid-2012) with a battery 3.2 old Yes and less than 300 cycles. I think the battery is depleting faster (which is natural after 3.2 years) but benchmarking between percentage left and the unit goes into mode 'sleep' is meaningless. For example, tonight the battery came into sleep mode with 16% left on the screen - sound almost if the MacBook thought it was exhausted.  I have heard do NOT need calibration for that MacBook Pro, but it feels like it does.  Which leaves me feeling very concerned on what continues.

  Things I've tried so far:

  1. full reset SMC and General reboots.

  2. a full discharge and recharge (attempted calibration despite says that's not necessary).

  3 using the activity monitor to see if something is sucking energy unduly.  (Which there isn't, and everything seems normal).

  4 using the battery health app to look at the State of the battery - said its 87% in good health and no calls for service or replacement.  ('Normal' status).

  Anything related or apparently wrong - but certainly go faster down and switch mode 'sleep' around 16 to 19%.

  All the words of wisdom of the community?

  Thanks in advance.

  Brad.

  A full release just the risk damage to your battery. Are you sure that the Mac is not just go to sleep as it was designed to do? Try to reset your default energy-saving preferences. If that does not resolve the problem, maybe it's a problem with the operating system, in which case you should try to reinstall OS X by pressing down the command key and the R key as soon as you see the Apple logo at the start of your computer to the top and then clicking "reinstall Mac OS X" and following the on-screen instructions.

  I hope you find this information useful.

  Best regards

  Austin

• MacBook Pro retina end of 2013

  Hey, I'll buy a used MacBook Pro from a guy on Craigslist. He says that he will wipe away the SSD before you sell it to me, do you think that I should always wipe and it is necessary to re - install OS X?

  This is how it should be configured when you take possession.

  What to do before you sell or give away your Mac - Apple Support

  The seller must perform all the steps in the link above and when you turn on the computer, that's what you should get: "When the new owner turns on the Mac, the Setup Assistant will guide them through the configuration process."

• Replace the MLB MacBook Pro. End 2012 model

  Sitting quietly: my MacBook Pro died in front of me. Ouch.

  Has paid a visit to my local Apple store. It seems that it was a defective MLB. Dear - a £500 repair bill!

  .... I decided against him... a new was perhaps in order. But I can't afford it.

  Came home, did my research and found this:

  Failures of widespread graphics 2011 MacBook Pro finally addressed by Apple repair program

  Went immediately on the phone to Apple Care and they agreed to mine qould qualify.

  So back to my local Apple store. Five days later, fixed. Free of charge!

  I am happy.

  I'm so happy to hear that you guessed it sorted. Apple are not always easy to find information:

  

  Without my Red Oval link looks like he's hiding! Old retirees here have long recommended that anyone who has seen the validation of the repair Extension program has to print and take with them to the Apple Store or FSAA, because no all employees/agents appear to be fully informed about these programs.

• MacBook Pro (retina, mid-2012) Apple Hardware Test 4MEM/9 error code / 40000000:0x794a4390

  The first AHT I ran gave me the code of error 4MEM/9 / 40000000:0x79456d90.  I shut down the computer as suggested and then re run AHT and received the error code 4MEM/9 / 40000000:0x794a4390.  The two tests have been extended to tests.  Is that going to be an expensive repair?

  Thank you

  golden2

  The error indicates that there is a RAM problem.  Since you have a MBP of the retina, the only alternative you have is to take the MBP for an Apple store genius bar.  (RAM is welded in a MBP of the retina and is not accessible to the user)  The assessment will be FREE and they will advise you of all the costs involved.

  Ciao.

• Windows installation 10 pro in my MacBook Pro (retina, mid-2012)

  Hello

  I was wondering if someone could help me to run the object above. I tried all the possibilities, but am still unable to install the windows 10 pro. Thanks in advance

  You may need to explain what you tried. Use Windows 10 full installation from a DVD or a download of Microsoft? You try to install on a separate partition? You have in your Utilities folder bootcamp, which is what can be used to install by following the instructions that you are installing.

• I've owned Adobe CS Master Collection since CS3. Currently, I run CS6 and can't update my software online. I run on a MacBook Pro retina mid 2012, 16 GB RAM, SSD, with the Mavericks 10.9

  Can you help me?

  Thank you

  Bob

  It seems that Adobe has reached the end of the line even by which they entered "desktop publishing." The 'right answer', it seems that you can not update of the CS6 use manual update. CS6 and, on the other hand, the idea of owning your own software and your files is no longer supported.

  Who doesn't remember the free versions of InDesign, we all received, even if Adobe has criticized the "bad old Quark" for overcharging their customers. No doubt that Quark was bad (and stupid - in retrospect). However, cloud 'Creative' new to Adobe is even worse than the Quarks value - rent you the software and don't have access to your own work while you pay the rent. We really speak to each other these questions on a Forum depopulated by Adobe? A few moments ago somebody assigned the label of "Right answer" to the first inadequate answer to my question. So now we compete with each other to see who can give the most 'popular' answer in the absence of adequate customer support?

  ?

• MacBook Pro (retina, mid-2012) will not start

  I have the mac above and I have a weird problem. The mac wouldn't start, I could hear the fan running and if I pressed the power button I can hear her stop.  There is no visible display or no light. the shift lock lights.  Charger lights work normally, if I reset the SMC, the light on the charger goes from green to orange and green. I contacted Apple and they could not help, we have also reset the PRAM.

  I left it on and then when the battery was completely dead, I plugged in the charger and tried to turn it on, I was rewarded with the icon of the dead battery, progress! After a few minutes that he started ok, I had the Apple logo and progress bar and then start.  Alls well well except when he went to sleep, she would not start again until I have go through the flattening of routine battery.  I now have reboot, stopped, started from cold, sleep and he waken up - everything looks ok.

  My question is there will be any newspaper to show what was causing the machine does not go to sleep?  I lost confidence and am very reluctant to go to the genius bar as I don't think they understand the problem.

  Thanks for reading

  All saved entries are found using Console in your Utilities folder. Is simply a software problem, then you can erase the drive and install a new copy of Mac OS X. If it's a hardware problem you need an appointment with Apple Genius Bar for the service. If you need a Apple Store - find a store - Apple.

• Reboots GPU - 2012 13 "Macbook Pro retina

  Hello.

  Recently had trouble with my 13 "Macbook Pro retina, end 2012 model.

  When you use safari (General Web pages or Youtube), the computer freezes completely and the sound (se) will be stutter. It will last for a minute until what the computer restarts automatically.

  I looked in the console and found this:

  
  

  Event: GPU Reset

  Date/time: Friday 20 May 22:29:54 2016

  Application: WindowServer

  Path:

  OS version: Mac OS X Version 10.11.5 (Build 15F34)

  Graphics hardware: graphics Intel HD 4000

  Signature: 813

  Report data:

  ===========================================================================

  Intel GPU Hang summary

  version 1.0.0

  ===========================================================================

  -Summary of the status for all THE rings-

  Ring MAIN is blocked in a lot buffer <-CAUSE DEEP!

  MEDIA ring is inactive

  Ring of BLT is inactive

  ===========================================================================

  Records of the key ring

  ===========================================================================

  -Ring MAIN-

  RING_HEAD = 0x00abe908 (offset = 0x000be908, wrap count = 5, wait_for_cond = 0x0)

  RING_TAIL = 0x000bfd60 (offset = 0x000bfd60)

  RING_START = 0 x 10204000 (offset = 0 x 10204000)

  RING_CTRL = 0x000ff001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 100 pages of 4 KB)

  -SUPPORTS - ring

  RING_HEAD = 0x00a0dc18 (offset = 0x0000dc18, wrap count = 5, wait_for_cond = 0x0)

  RING_TAIL = 0x0000dc18 (offset = 0x0000dc18)

  RING_START = 0 x 10304000 (offset = 0 x 10304000)

  RING_CTRL = 0x0000f001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 010 4 KB pages)

  -Ring of BLT-

  RING_HEAD = 0x00600b38 (offset = 0x00000b38, count of wrap = 3, wait_for_cond = 0x0)

  RING_TAIL = 0x00000b38 (offset = 0x00000b38)

  RING_START = 0 x 10314000 (offset = 0 x 10314000)

  RING_CTRL = 0x0001f001 (enabled, auto off report (0x00) don't waiting, semaphore without waiting, length = 0 x 020 4 KB pages)

  -Other records associated with convicted ring-

  BB_ADDR = 0x10c10f4d (offset = 0x10c10f4c, valid = 0x1)

  BB_STATE = 0 X 00000000

  IPEIR = 0 X 00000000

  ACTHD = 0X10C10F4C

  EIR = 0 X 00000000

  EMR = 0XFFFFFFFF

  ESR = 0 X 00000000

  INSTPM = 0 X 00000080

  INSTPS = 0X8000020B

  UHPTR = 0 X 00000000

  -Slice commune INST_DONE register.

  Some common slice engines DO NOT.

  -INSTDONE_CS (= 0xffffff97): don't do not = HiZ, IZ, SBE,

  If anyone can help with this question it is greatly appreciated

  If it's a 15 "model then see: 2011 MacBook Pro Extension program repair the graphics issues. Or make an appointment at the Apple Store - Genius Bar store and bring it into service. You can also search an Apple Store - find a store - Apple.

• Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  Need advice. Would you sink (at least) $600 to replace the screen on a MacBook Pro 13 inch retina end 2012 or you want to buy a new one?

  You can buy a worn integers for that.

  Only if your machine is Virgin and you want only one specific

• is macbook pro 13-inch 2012 no retina. apple remote support?

  is macbook pro 13-inch 2012 no retina. apple remote support?

  Yes. It has infrared port.

• MacBook pro retina display (mid-2012) goes black

  All by using the computer to randomly screen goes completely black.  After a few attempts at tapping trackpad or a bite or two, screen turns on but then log on to the computer. Program I was running is still there and continues on. It is very random and I fear that a logic board or the video card component may be out.  MacBook Pro retina display mid-2012, 16 GB 1600 mHz DDR3 RAM, graphics NVIDIA GeForce GT 1024Mo of 650M;  2.6 i7 running OS 10.11.2

  Hi James,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your MacBook Pro. I'm a bit ambiguous on the screen exactly who you see when you log in, but according to your description it looks that your computer may be involuntarily go to sleep. If this is the case, you can find the troubleshooting steps in the following article useful:

  If your Mac does not sleep or wake up when expected - Apple supports

  As mentioned in this article, another possibility on laptops like the MacBook Pro is that the screen closed sensor may be triggered unintentionally. There is a small magnetic sensor in portable computers and sometimes, being close to things like briefcases magnetic closure or magnetic jewelry can cause him to think that the display was closed, which then puts the machine in a locked sleep state. If possible, you can test the issue on an office open without any potential source of interference.

  Magnets in devices could cause sleep your Mac computer - Apple Support

  See you soon

• Connect two Macbook Pro retina to create the extended desktop

  I have two Macbook Pros retina 15 inches (personal: mid 2012, work: mid 2015). They are both under OS x El Capitan 10.11.3

  I would like to connect them to create a wide area network.

  Am I wrong? Is there a way to share the two opens with a bolt of lightning?

  I don't understand what you're trying to do. In your message your refer to:

  1. create the extended desktop

  2. create a WAN

  3. share the poster

  That is what you try to do?

• Acrobat XI on MacBook Pro retina drops the scroll of PDFs

  Hi all.

  I have seen a lot of discussions around the net on a slow scrolling on macbook and acrobat pro, but after trying a few things I am obliged to ask me for help.

  I have a MacBook Pro 15 retina "end 2012 and fully updated Mountain Lion (10.8.3), there the SSD and I hit him with the upgrade of the processor and the ram on purchase upgrades."

  For most applications it is very fortunately quickly - including, I should say a large part of the suite CS6.

  But when it comes using PDF files in Acrobat XI it is really almost unusable.  Interface for scrolling and scrolling lag hesitation is overwhelmed.  It doesn't seem to matter too much if it's a large or small PDF number of pages or the size of the images - IE the pages of texts which are rendered instead of text.

  Of course, some of the PDF files I use generally are quite long and wide. I'm frustrated at present more than one which is 690 pages but only 5 MB - 300 pages and less than 2 MB, but they bogged down something horrible.

  And the most frustrating thing is when I open their preview they scroll through everything as quickly and cleanly as they do on my iPAD!

  I tried to reinstall, I tried to uncheck "run in 32-bit" and I looked at each internal adjustment, I can find nothing doesn't.

  Can anyone suggest anything that could be causing it is so slooowly on this platform who should eat look at a simple pdf and in annotating alive - (and I have yet the point where I'd be confident adding PitStop etc.)

  Best regards

  Will be

  I'm sorry it doesn't work for you, and if I write we support Retina Display, it because we

  You should not change the info.plist file to support retina display (except if you have messy hair with a previous installation to try to support retina display as it is proposed to do for MS Office on certain websites).

  Menus, toolbars, dialog boxes... are all rendered at full resolution and if other users confirm that, then maybe you should yourself question on this subject rather than accuse Adobe of a compatible software Retina no shipping...

  Jon brings a good point to ask you to check the plist file. Supports Acrobat 11.0.03 same retina display (in the user interface only, not the view of document), so there is NO WAY you get pixelated menus with a regular install.

  BTW - on a different thread I asked you to double check that you are under 11.0.04 and possibly provide a screenshot. I'll be happy to help you if you really have a problem. Let me know if you need someone from Adobe to provide you with some support.

  Thank you

  Luke