Multiple snapshot monitors led Flash memory-based

Similar Questions

• Satellite L500 is OFF and the Green LED flashes if hooked on sector

  Help!

  I have a L500 which is not outside the green light flashes when the power cable is plugged in, but does nothing else

  Hello

  What indicator do you mean exactly?

  DC (first on left) indicator lights up green when the properly feeding the power adapter. If the output voltage is abnormal or if breakdowns computers power indicator lights.

  The other indicator (power led second from left) lights green when the computer is turned on. If you turn off the computer to sleep, this LED starts blinking Orange.

  Also if there is a failure of memory Power LED repeatedly flashes
  0.5 sec and off 0.5 sec
  If there is a problem with the slot A the LED flashes two times orange then green once
  If there is an error in the B slot, the LED flashes orange green once then twice
  If there is error in the slot A and B the LED flashes two times in orange and green.

  But if the power light flashes green only, I guess there is a motherboard problem.

• Satellite L40 - 15 G - LED flashes

  Hello, I have this problem, the toshiba satellite L40 - 15G, junt does not illuminate.

  I already remove it from memory and try the power up, nothing.

  I already measured AC adapter / DC, 19v is ok.

  pressing the power button with battery on adaptor taken 30 seconds and nothing.

  The only thing appens, led light, the power light green and orange battery light, appear, and the battery orange flashing with green led power light.

  I mean, seers green rest power one and the battery led flashes, I unplug the AC adapter, e reconnect and the 2 green led watch on and orange, in a few seconds, stars blinking the led battery led (orange) and rest like this and nothing of power up... help please.

  I already try universal adapter and nothing, in addition to this question... really helps.

  And nothing moves fans nothing, only the led lights.

  Can someone help, please.

  Greetings to you all

  Also on my side i have the power to change, and the back side of the Commission, have nothe pass as the power switch, if a press led ligh e stops, I'm talking about, I have everything ready dissamble boad ok, on my hand, I found this switches... what he for?

  And some one take the battery CMOS, in frist place I guess is not a problem, only the Don t of the bios, save the changes I did, plase can one help everything, everything...

  Find the testicles or, thank you!

  I can tell you with certainty what s wrong with your laptop, but I guess that its a serious problem of motherboard.
  Perhaps the electronic power supply on the motherboard is affected.

  Fact is that this isn't the battery problem. Why? Because the laptop should work without the battery, but comes to connect to the network.

  You said that the adapter is OK. Well, it means that the battery and AC adapter isn't the troublemaker you said that memory was also tested.
  So this isn't memory problem and, therefore, I think, it could be the related problem of motherboard.

• Flash memory card data verification, how to compare folders/files in Labview?

  Hi, I need to check and verify the data that is stored in a Flash memory card, sience I got a good card Flash contant, I hv to write a VI to check suspected bad Flash card data against Flash memory good data card, I use the output folder list folder list function is compared with the data of constant string that contains the name of folder and files (since I know the content good map).

  Is there any other method to compare the data/files/folders, such as the CRC check for data... all all tracks, ideas? Please help me.

  Thanks in advance,

  Ravikumar C

  The range of the file IO has a function to perform an MD5 on a file.  If you want to detect the validity of a set of files, what happens if you had a list of files and md5s and then conducted an audit to see if all the files have the MD5 expected.  Of course, you will need to take a line of well known file-based and MD5s.

• HP Pavilion m9066 green led flashes

  Hello!

  I have HP Pavilion m6099 and nothing happens when I press on at the power switch. At the back of the power supply the Green led flashes when the power cord is connected. When I take off the motherboad main supply cable stops flashing and led a continuous green light. When I connect MB power cable flashes again begins.

  Can I determine this behavior that PSU is ok and the problem is in the MB, CPU, memory, etc. I tried to remove all of the cards memory one by one, but still flashing continues. I have no tools to test the PSU.

  It flashes continuously, without interruption, etc..

  Do you have any other suggestions how to proceed?

  BR

  Laakspen

  laakspen,

  This is a normal situation. There is a discussion. Read through all of the first page. The discussion involves the diagnosis of the PSU and a hair dryer.

• Master of IO card blue LED flashing

  Hello, I have an alienware aurora ALX R4 and when I opened the door to have a peek inside I see a blue LED flashing on the master of i/o board, is - this normal?

  Ahmed I can only say that it is not a question based on the Area-51 MIO. Issue 3 of the LED flashes (blue) and it is close to the part of READING of e/s of the MIO. Just to see these messages on the Diag tests:

  en.Community.Dell.com/.../20148230.aspx

  en.Community.Dell.com/20128296.aspx

• Take a multiple snapshot of different VM´s

  Hello

  Anyone got a script to take different VM´s. example multiple snapshots when you windows patch id like to snapshot slected vm´s before applying the patch.

  Concerning

  Christer S

  Hi Chrsun02,

  "is it a medium esay to ad a function report to the commnad.

  Please tell more that you want to report on

  "im"wishing to' an easy way to get rid of stereotypes when I know that servers is ok. "

  Right, so before patching, you created snapshots for some virtual machines, and gave you the name of the snapshot for this purpose.

  for example

  Get - vm testgk | New-cliché - memory: $false - suspend: $false-name "testsnapshot001" - Description "my snapshot test patch before.

  on my vm testgk, I created the new snapshot with the name "testsnapshot001" for this pupose

  now I want to remove it

  Get - vm testgk | Get-Snapshot? {$_. Name - eq "testsnapshot001"} | Remove-Snapshot

  So I have vm testgk query, ask this virtual machine snapshots that have name testsnapshot001, and then delete the snapshot.

  If you have created snpahosts for more virtual machines give their name separated by a ",".

  Get - vm "vm1', 'vm2', 'vm3 | Get-Snapshot? {$_. Name - eq "testsnapshot001"} | Remove-Snapshot

  If you're sure you didn't any what other snapshots you can omit this part?: {$_. Name - eq "testsnapshot001"}

  so in the end, you would write:

  Get - vm "vm1', 'vm2', 'vm3 | Get-Snapshot | Remove-Snapshot

  If you don't want to answer the question confirmation add - confirm: $true

  Get - vm "vm1', 'vm2', 'vm3 | Get-Snapshot | Remove-Snapshot - confirm: $true

  If you want to specify vms not with names but with location:

  Get-cluster "my_cluster01" | get - vm | Get-Snapshot | Remove-Snapshot - confirm: $true

  If you want to get a report for snapshots:

  Get - vm | Get-Snapshot? {$_.name - eq "testsnapshot001"} | Select the name of name,@{N='VM'; {E = {$_.vm}}, @{N = "CreatedOn"; E={$_. Created}}

  So it will go through all of the virtual machines, instant advertising with the name: testsnapshot001 and display its name, date, name of the virtual machine

  Get - vm | Get-Snapshot? {$_.name - eq "testsnapshot001"} | Select the name of name,@{N='VM'; {E = {$_.vm}}, @{N = "CreatedOn"; E={$_. Created}}

  VM name CreatedOn name
  ----                                         -------                                 ---------
  testsnapshot001 testgk 21/08/2012 14:09:47

  And even once on the line will interview all machines virtual registerd in vc. If you want to check only for some more specific:

  Get - vm "vm1', 'vm2', 'vm3 | Get-Snapshot? {$_.name - eq "testsnapshot001"} | Select the name of name,@{N='VM'; {E = {$_.vm}}, @{N = "CreatedOn"; E={$_. Created}}

  or

  Get - vm "vm1', 'vm2', 'vm3 | Get-Snapshot | Select the name of name,@{N='VM'; {E = {$_.vm}}, @{N = "CreatedOn"; E={$_. Created}}

  to query all snapshots there and not only those that have been made for the purposes of the application of patches

  OR!

  a dirty, quick control for VMS with snapshots in general:

  Notice-EEG - ViewType VirtualMachine-filter @{"snapshot" = ""} | Select name

  I would like to know if it works for you.

  Kind regards

  Greg

• How to monitor the CPU, memory and i/o on the system

  Hello..
  
  Some body help me?...
  
  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?
  2. how to monitor the CPU, memory and i/o on the system?
  
  TQ
  balleur

  In an attempt to partially answer your questions:

  1. how to manage the monitoring of the performance of the system and the database during execution of ODI?

  Monitor the performance of the application from a commercial point of view. As transactions per minute, or response time or time elapsed for the key events of the company. Monitor the activity of the material such that the CPU usage is not necessarily linked to the performance of your application. Performance should be measured from top to bottom - business first, then the lower levels until you get finally to computer equipment. Only if you get a problem to the next level - response time is too large, for example - you can go through the lower levels to identify the cause and fix it.

  2. how to monitor the CPU, memory and i/o on the system?

  I personally use "sar" on UNIX-BASED or Linux, or rather "CFDCs" which is the system activity data collector. SADC will measure and collect data on activities on CPU, memory, disks, etc. and save them to a file in binary format. You can then extract these measures later for analysis using SAR (sar f sadc_file_name). The benefits of SADC are that it is light (these operating systems measure such things anyway, just CFDC records far), it records everything at once (with the exception of the network), it records the time stamp too for each measure, and you can analyze it later when you want to.

  There are commercial products out there too who do similar work, with additional features, such as the integration of Oracle and the relationship between several systems. TeamQuest is an example, but there are others also. (I do not work for TeamQuest, but I used their product in the past).

  John

• Satellite A60-392, problem of flash memory

  Hello world
  I just installed Win XP Pro on my laptop A60-392. I have a Sony Microvault 128 MB of flash memory. I plugged the memory stick into a usb port. The device drivers have been installed correctly, but then the memory stick looks like it's empty. I checked with the other pc and it works perfectly. I also checked the slot usb with a mouse or other usb camera devices, and both work properly. Any ideas on that?
  Thanks in advance

  Hello

  Please check if you have any "mapped manully" devices that could collide with the Windows dynamic drive mappings.
  F.ex. If you have a network folder that you have written or manually set on E: and the PC has a C: (hard drive), and a D: (CD/DVD) then the next card reader would be E:. Windows is not 100% good to discover you already manually or by other means mapped your network to E: folder so he's trying to map your USB drive to E: - then it will be not visible in Explorer and so on.
  Solution: Map the USB device or mmanually device mapped to a different drive letter.

  BR

  Tom

• Tecra S2 - power and battery LED flashes - no start

  G ' Day at all.

  I have a TECRA S2 under XP SP3.
  Everything was fine until I went to a place of friends with her and plugged into the power supply and it lights up not at all and no LED.

  I removed the battery and then tried again and then happen to the power and battery LED flash together, but nothing else.

  Tried several times with the battery inside and out with the same results.
  I have stabilize power before removing or installing battery.

  Do not even have BIOS or a screen. I put the HARD drive in a caddy, and it's accessible.
  See you soon
  kb3500

  > Everything was going well until I went to a place of friends with her and plugged to the power
  Did you use the right adapter?

  To be honest, it looks like a malfunction of the power supply motherboard maybe electronic issue of power.
  the power indicator would start flashing amber if the AC adapter voltage is abnormal or failure of computer power supply.

• How to install Win XP on Qosmio G20 using USB flash memory key

  Dear Admin,

  This is regarding my laptop Qosmio G20.

  Last month my OS (windows XP media edition) has been corrupted so I attempt to reformat and reinstall the operating system.

  But unfortunately my CD/DVD-Rom does not work/play,.

  Then I try to install it via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  plezz help me install XP or Vista or 7 those who works there...

  plezzz plezzz sound my laptop preferred

  Thanks in advance

  JAI

  > Then I try to install via a PEN drive bootable with integrated... XP but when I go into the BIOS I n I find USB Boot option... :-(

  Connect the USB flash memory key to the laptop, now switch on and press F12.
  The start menu should appear where you could see all the possible boot devices.

  Do you see the USB boot option in the start menu?
  If this isn't the case, then you will not be able to boot from USB flash memory.

  > Then I remove my main hard drive and put it in another laptop and install the XP, its work in this laptop, but unfortunately when I put the new HARD drive the Qosmio his departure gives the XP logo but in 5-10 sec its judgment and give a blue screen message then then restart automatically...

  I guess that this is because the RAID drivers was not included!
  Qosmio G20 supports the RAID controller and you add the RAID driver (located on the Toshiba UE driver page) in order to recognize the HARD drive.
  But I put t know if you could do so using another computer I guess that's not possible.

  Maybe you can try to disable RAID in BIOS

• Toshiba 22L1334G - green LED flashing and TV does nothing

  Hello, I have a 22L1334G and I had my tv problem is that every time he has cycled from st - by situation is that the first tuning has been activated that he had just bought. Do you want to download the latest version of the software on the web that corresponds to the version V3, 6 3 and now my camera is left with the Green LED flashes and does nothing. Could someone help me.
  A welcome message

  Same problem with 32L1334DG

• Satellite Pro M10 cannot start properly - AC LED flashing orange

  Hello

  I have a weird problem that I can't solve.

  (1) when my Satellite Pro M10 the plugged AC adapter and the battery, the AC led is green and battery led is orange.
  (2) when I try to turn it on, several times it not light and the dissepear of leds for 1 or 2 seconds and my AC led flashes orange. Sometimes it lights up as it should be.
  _________
  When this problem occurs, it will take a lot of time before it turns normally. I searched the internet for a solution, but I couldn't find one.

  I already removed the battery and try to turn it on, but it does not solve the problem. Or when I remove the AC adapter and try to start it on the battery itself.

  I also removed the two of them and you press the button power on for 60 seconds. After that, it will sometimes start with mains or battery adapter.

  My bios is updated to the latest version. (I've done this when he started only five minutes ago, but the problem is not resolved). I also believe that when the m10 is enabled and when I close it, it crashes also.

  Do anyone know how to solve the poblem? Thanks in advance.

  Hello

  These problems are very rare and shouldn't t happen if hardware or software is ok.
  Power LED blinking orange means there could be a hardware malfunction.
  It is a code flashing microphone and a technician can be read.
  This code must be translated into the hexadecimal digit.

  But for ordinary users it s not able to know what it means. In my opinion a power electronic malfunctions and must be verified by an ASP.

• AT200 led flash does not work after upgrade ICS

  Hello!

  I know not why, but after the upgrade to ICS, I realize that the rear camera led flash lights.

  Anyone have this problem?

  Thank you!

  Hello

  Have you tried to reset the AT200?
  Do this

  Check the updates of the Service Station once more
  Someone posted a new update available

• Toshiba 40SL733g - how do I play video files from USB flash memory

  When I plug my USB key into the USB port, menu Media Player comes with two options: Photos and settings.

  How can I make my TV recognize and play video files from USB flash memory?
  Flash is on FAT32.

  I tried to play avi, mp4 and mkv files, but nothing happens. It seems that flash is empty.

  Could you please help me solve this problem.
  Thank you!

  bzunic, have you updated the firmware your model?

  With my own game, (32RL900A), the notice said that some of the buttons of the remote control are "unused", however, after the first update of the firmware, the "unused" buttons have been used, (in our case, record, Time Shift and so on).

  Is the reason why I talk about this, these features became available after an update of the firmware and not included in the manual of the user, in our case, and a subsequent download of the instruction manual for our model actually gave instructions for the use of these features, which have been presented as 'not available '. in the manual original instructions supplied with the TV, but became available after the update of the firmware.

  Let us know how it works...

  donhe7