Multipoint Server 2011 (HP Multiseat 6200 SFF)

Similar Questions

• Firefox does not work for multiple instances of the SAME user account on Windows Multipoint Server 2011

  We have a PC HP of MulitSeat MS6200
  It runs Microsoft Windows MultiPoint Server 2011 (which seems to be a twisted version of Windows 7)
  It is implemented in a laboratory of computer science and students connect you using their account for shared room - IE multiple instances of the same user accounts are currently running on the PC at the same time.
  The first student to run Firefox can work with it without a problem.
  However, when another student try to start firefox they get the following message:
  Firefox is already running but is not responding. To open a new window, you must first close the existing Firefox process, or restart your system.

  Cannot start Firefox using a profile that is already used by someone else.
  Each Firefox instance needs its own profile or you will get this error message.

  • http://KB.mozillazine.org/Using_multiple_profiles_-_Firefox
  • http://KB.mozillazine.org/Bypassing_the_Profile_Manager

  Use-no.-line switch remote control to open another instance of Firefox with its own profile and to different instances of Firefox running concurrently.

  • http://KB.mozillazine.org/Opening_a_new_instance_of_Firefox_with_another_profile

• An anti virus for multipoint Server 2011?

  I am a teacher using multipoint Server 2011 with computing devices of N. I can't install 2011 anti virus trend micro titanium or kasperskey anti virus 2011 on my work stations please help...

  You will find the Windows Server support in these forums: http://social.technet.microsoft.com/Forums/en/category/windowsserver

  Specific Windows Server security sub-forum: http://social.technet.microsoft.com/Forums/en-US/winserversecurity/threads

• Windows Multipoint Server 2011, several stations does not.

  WINDOWS MULTIPOINT SERVER 2011, SEVERAL STATIONS DOES NOT

  I USE WINDOWS MULTIPOINT SERVER 2011, TWO STATIONS OR MORE ARE NOT ABLE TO IMPLEMENT.

  I INSTALLED 20 CAL DEVICE

  HOW TO INSTALL SEVERAL STATIONS? ANY OTHER LICENSE, I NEED AGAIN?

  Help me. .

  CONTACT ME: * address email is removed from the privacy *

  Hello

  Because the problem is with Windows Multipoint Server, I recommend you post this question in the Forums of Windows Server.

• Is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011?

  Hello everyone!

  I have studied MultiPoint Server documents, but have not found the answer: is it possible to set up workstations with 2 or 3 monitors each in MultiPoint Server 2011? For example I have computer with graphics HD6970 and HD4790 (more HD4290 on board) and to 'split' in several positions - a high performance graphic with 3 monitors and 2 connected to HD6970 or 3 other workstations for internet/treatment of text with each, a lcd panel connected to HD4790 and HD4290 cards. So I could build small desk with a powerful station :).

  In other words, using windows terminology guide, one might wonder it is able to have the teachers with more than one monitor computer, while students have jobs with a monitor?

  (Subsidiary question is: what Eyefinity, is working for MultiPoint - assuming that the station with more than a graphics card?) Can't find any information in the deployment also guide).

  Kind regards

  Maciej

  Please transfer your inquiry in the most appropriate in Forum Windows Multipoint Server.  Thank you!

• Do I need Windows Server 2008 CALs to use MultiPoint Server 2011?

  Our company is planing to use MultiPoint Server 2011.

  I found prices info here: http://www.microsoft.com/windows/multipoint/buy.aspx
  But I do not understand the difference between "MultiPoint 2011 CAL (with Windows Server 2008 CAL) 'and"MultiPoint 2011 CAL (without Windows Server 2008 CAL)"
  Do we really need Windows Server 2008 client access licenses?
  Best regards
  ALEKS.

  Hello

  You will need to create a new post on the TechNet site for the server support, please visit the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• picture of windows multipoint server premium edition 2011

  Hello

  need urgent image of windows multipoint server premium edition 2011

  I download the same support of https://www.microsoft.com/licensing/servicecenter/

  download media is wrong (it's the image of windows server 2008 r2 edition)

  the name of the image download is [SW_DVD5_Win_MultiPoint_Svr_Prem_2011_64Bit_English_MLF_X17-35077]

  Please someone do what is necessary for the same

  Hello

  I had a call with vlsc Center, 0008004401555. the Executive said to post an email and he tried to reslove the issue.

  then I look on the net. I got my answer in wikipedia

  "Windows MultiPoint Server 2011, based on Windows Server 2008 R2 SP1"

  When we install the software we get first installation screen "windows server 2008 R2" because it is based on windows server 2008 R2. »

  When the installation is complete we have windows multipoint Server 2011

  and we also get the "windows server 2012" screen when we install mulitpoint 2012

  It's the first version of the MultiPoint rest on Windows Server 2012 ,

  Please visit: http://en.wikipedia.org/wiki/Windows_MultiPoint_Server

  THE PROBLEM IS SOLVED

• Where can I find the Multipoint server 2010 and 2011 Dutch languagepack?

  original title: Multipoint Server language packs?

  Where can I find the Multipoint server 2010 and 2011 Dutch languagepack?
  There is a pack of 35 languages available, where can I find it?

  Thank you

  Please repost your request in the Forum Windows Multipoint Server.  Thank you!

• Windows Home Server 2011 complete system restore problem = cannot start the LAN adapter

  Home built PC

  Card mother Gigabyte GA-Z77MX-D3H

  Network adapter Atheros AR8151 PCI-E on the map connected to the LAN Cat6

  Windows Pro 10

  Windows Home Server 2011 on LAN

  I had a hard drive failure partial who gave no symptoms or errors except a VERY slow start-up and operation.  I tried to do a restore of the entire system of my Home Server 2011 backups to see if, perhaps, just the image was corrupt.  USB was created and all drivers copied from pilots for the full system restore folder.  Has started the full restoration of the system and loaded the missing NETWORK adapter driver by using the scanner for drivers.  Driver support was successful but no lights NIC and the message "cannot find server".  NETWORK card was working fine before, even with the bad hard drive and also after the abandonment of the restoration.  Installed the new drive hard C:-System and that was the main problem, BUT..., the later to restore attempt was always the NIC starts not problem.  Tried the driver directly at Gigabyte support and drivers drivers for the full restoration of the system of records from several different backups.  No love.  Just NIC does not start after the specified load successful pilot.

  All good advice?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Windows Small Business Server 2011 - "windows setup cannot continue because a required driver could not be installed.

  Hello

  I try to install windows server enterprise on my hp proliant gen 8. I used smart supply and that everything was working fine, when switching to the windows installation it gets to 99% then comes up with the error:

  Windows Setup cannot continue because a required driver could not be installed

  I was wondering what I can do to solve this problem, I have tried several times without success. Thank you for your time.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Windows Multipoint server 2012

  Hi all

  I am facing this problem in Windows Multipoint Server"

  The number of connections to this computer is limited and all connections are in use right now. Try connection again later or contact your system administrator. I want to connect through a single server 20 clients but when seven users are connected to other people can not connect. I need some help on how I can solve this problem.

  Thank you

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your question in the Multipoint Server Technet Forums.

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=windowsmultipointserver

  See you soon.

• Looking for Windows Multipoint Server 2012 Standard

  Hello

  I can't find the standard version of the Multipoint Server 2012. I found a 180-day trial, but it can only be upgraded to Premium and I have a Standard version product key.

  Also, I see that the standard version a well-off 10 landmark. This means that I can use the server in station mode and have also 10 connected on terminals, or the server is considered to be a terminal and only 9 that more terminals will work?

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• 0xc000000e - Windows Home Server 2011 - how to open the repair or the command line option

  Hello

  I currently have the problem that my Windows Home Server 2011 stops booting with the 0xc000000e error code.

  Of course, I searched the web and found the following article:

  https://support.Microsoft.com/en-us/KB/2261423

  Can I boot from my installation DVD. "Windows loading files.

  While two options:

  -new installation

  -repair

  I click on repair. The next screen prompts to choose a restore image. ???? No other options or possibilities. No command line, nothing.

  OK boot with F8. Start menu. No repair option. Only "safe mode with cmd. Tried this. Then download the same GUI as before. Same two options. No CMD and taxation not possibility to use STARTREP. EXE.

  Any suggestions?

  Thanks in advance.

  Alexander

  Hello

  Your question is beyond the scope of this community.

  Repost in Windows Home Server Forums.

  https://social.Microsoft.com/forums/en-us/home?category=WindowsHomeServer

  See you soon.

• Windows home server 2011 - remote access error - wrong password or account to GoDaddy

  My windows Home server remote access does not recognize the domain, I've implemented into Go Daddy.

  The login and the password are considered bad by the wizard.

  Of course I can access with login and password to godaddy.com and everything is nominal.

  I noticed the problem 4 weeks ago. No solution has worked so far.

  I tried even to remove the entry in the register (via REGEDIT), I found a link to that in the past. But the problem remains.

  I fear that some change was introduced on the way the security part

  Hello

  I suggest you post your query on the TechNet forums to get help. Consult the following link:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/ba0d1c89-ad59-414a-bf00-d3085a9f25d9/Windows-Home-Server-2011?Forum

  It will be useful.

• Windows Small Business Server 2011 Standard access to download

  Hello

  I need to access a copy of the Small Business Server 2011 Standard edition since the MSDN site, in order to help one of my clients.

  They have SBS 2011 standard installed on their network and I'm going to make some big changes to their network. To do this I need to access the installation (file ISO DVD) on MSDN disc. They have the product key, but not the original disks that were used to install SBS 2011 Std.

  Thank you for your help.

  Hello

  Your Question is beyond the scope of this community.

  I suggest that repost you your question in the Forums of SBS.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.