Multisim API toolkit for LabVIEW works not


Sorry, I don't have the appropriate license, that's why it does not work...

If someone is able to do (maybe a moderator): Please remove the post. I can't.

Ussr123.

Tags: NI Software

Similar Questions

  • Internet Toolkit for LabVIEW 2012 64-bit

    I have an application which is currently written in LabVIEW 2009. It requires the Internet. I try to open it in 2012 of LabVIEW (64-bit) (using Windows 7 64-bit). LabVIEW 2012 does not find the box at Internet tools since he has been deprecated in LabVIEW 2012, so LabVIEW complains.

    So I downloaded the toolkit LabVIEW 2012 Internet and tried to install it. When the Setup program tries to run, it stops with an error message that says:

    "NEITHER LabVIEW 2012 (32-bit) or more must be installed before installing OR.
    2012 Internet Toolkit LabVIEW. »

    Can someone tell me where I can find the Internet Toolkit for LabVIEW 2012
    (64 bit)?

    Thank you

    -Ray

    Since you seem to understand that the Internet Toolkit has been deprecated, I do not understand your question. There is no 64-bit version of the tool. In fact, it has very few tools that do not have a 64-bit version. In order to use the old, 32-bit version, you must use it with the version 32-bit LabVIEW, as said the message.

  • Third-party licenses and Activation Toolkit for Labview 8.5

    There are any third-party licenses and the Activation Toolkit for Labview 8.5 as LV2010. PLS help...

    I know what you're asking, and in the other thread, said you it was for 2010 only. There is a support for 2009, but not for your old version. Go with the suggested dongle or upgrade your version of LabVIEW.

  • modulation toolkit for labview for embedded controller PXI-8106

    Hello

    I have an on-board controller: 8106 PXI OR PXI 5661 and 5671. He came with DAMA RFSG but not the Modulation Toolkit (TM). Now I cannot access some screws RF Toolkit as NI DAMA close.vi etc. I opened a code that uses this DAMA close.vi and since I donot have probably MT, I can't run since the claim code to choose the path!

    I checked for the TM in the start menu-> all programs-> national instruments-> modulation but in vain. Also, I opened MAX and under "Software", I could find DAA, pilots RFSG etc but not the Mt.

    When I checked online it says I have to buy the cd/dvd of MT. If I do, how I run on my controller?  What are my other options?

    PK

    Hello

    I think I solved the above problem. I had to install the RFSG and ACD for labVIEW. For some reason, the equipment was delivered to me with DAMA and RFSG, but only for C. This part was misleading because I saw on my National Instruments system but not the DAMA DAMA and RFSG vi. Also spectral measurement Toolkit (SMT) has not been installed. SMT is a MUST for the good functioning of the RF VSA. After you install the required drivers and tool boxes, I am able to run and use the VI completely.

    Thanks for your support Abhishek.

    PK

  • Report Generation toolkit for labview 2010

    H all.

    I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

    Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

    Thanks for reading.

    Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

  • Call a dll for Labview: function not found in the library

    Hello

    I try to call a form very simple .dll Labview. I have compiled .dll file for x 64 by using Visual Studio 2010, because I'm using Labview(64-bit). I did everything exactly as I have read in several tutorials. But the "call library function node" does not create a menu with functions avalible as it is supposed to do. The Import Wizard found no function either. What is the problem with my .dll?

    I added a block marked 'extern "C" ' file in my source, but it still doesn't work.

    Thank you

    Matthias

    You have not read the article properly. Read step 3. In the .cpp file, you add '__declspec(dllexport)' to the body of the function. In the header file, you add extern 'C' at the beginning of the prototype. It comes to dealing with the name decoration than the C++ compilers.

  • How can I remove a file for LabVIEW does not keep a copy in memory?

    After I use the command "Delete" files Advanced features, and then create a new file with the same name, LabVIEW must have the original in memory because the file continues to grow and is not what I want to do.  I tried the deallocation "request" for the control of the Application--> control of memory, but it does not work either.

    Your help is appreciated and thank you.

    Vince

    I never saw a 4 d picture in before real employment.

    You're not erase your data.  In the second excerpt that you posted, you continually add new 3D you berries table 4 d.  You manage this 4 d with the feedback node table.

    What you need to do, when you want to delete this table 4 d, for wire table 4 d vacuum in this feedback node rather than the result of the function Array construct.  You can use a function of selection or a structure deal to choose between the results on the cable and an empty table 4 d constant according to some Boolean condition allows you to determine the table needs to be emptied.

  • MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer?

    Hello

    Help, please

    Hi 40123157,

    MATRIX support is included in the competition MINDSTORMS Kit. Here you can find the box tool from last year: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.

    An updated version of this tool for 2014-2015 aims to be released at the end of August.

  • quick response of iOS for whatsapp works not when the alphanumeric password has been on iPhones

    Hello

    My question was, I was getting keyboard white with no key, just by doing a quick response to whatsapp messages, while the phone is locked and if the phone has been unlocked, it works fine.

    After a quick search, I found that in this case, on all iPhones (I was able to replicate on iPhone6s, 6 and 4S), regardless of the versions of iOS (as long as it takes in charge the quick response), while the phone has been set with digital access code Alpha and locked. If it's a digital password, quick response normally works with the good visible keyboard. From now on, I found that this happens only with Whatsapp Application. Can someone tell me what is an iOS problem or something which Whatsapp team need to check?

    (Also please check on your other app, instant messaging, if get you this error during the series with an alphanumeric password).

    Thank you

    Doudou.

    With the help of iPhone6S

    OS version: 9.3.4

    Since I have never heard of this issue with any other application and WhatsApp is not an Apple application, I suggest you address the problem with WhatsApp and see what they have to say.

  • Microsoft client for networks works not

    I had trouble to connect to other machines through recent programs.  He began by trying to access a PowerPivot file that told me that I had no access to the data for some pages on our server .xml, but I can open the page directly through my browser and I can even connect to the server itself without problem.  I traced the problem down to my Client for Microsoft networks.  I'm on the same network as all computers in our area, but I am not connected to the domain itself.  I tried connected to the domain, but when I look at my options, the option to connect to the field is grayed out (I am logged on as an administrator account on my local computer).  When I go into the properties of my network, I can't access the properties for the Client for Microsoft networks.  I tried uninstalling the Client for Microsoft networks and put it back, without success.  I tried to uninstall my network drivers and resettlement without a bit of luck.  I have a feeling that the files of Client for Microsoft networks have become corrupt (I think they are the .inf files.  Can I get a confirmation on that? and if it's true, no matter where I can download new ones for Windows 7 replace the 'old'?).

    I'm not too sure if anyone has any ideas... This seems to be a problem with Windows XP and 98 after doing some research.  Any help would be appreciated!  Thank you guys!

    Hi Jay,.

    The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

    Windows 7 networking TechNet Forums

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Mcc usb 1208FS for labview 10.0 connection problems

    I have version 10.0 of Labview installed on windows XP computer. I want to connect MCC USB 1208FS for Labview. Not able to see the device MCC in device of measurement and Automation Explorer interface. It appears? Please let me know the steps to access the device of the MCC in Labview.

    I can see the MCC card detected in the software InstalCal of MCC supported. I installed the latest version of the CMC the CMC site software.

    As far as I know, you will not be able to see physical computer as in MAX.

    From the file of help from MAX: "Measurement & Automation explore (MAX) allows to access your National
    Instruments of devices and systems. "that is material MCC is not a feature of National Instruments.

    Why not stick with the InstaCal software and the MCC screws provided?

    Ian

  • Getting BB JDE Plugin for Eclipse work?

    Hello

    I was now almost two days on this and am nowhere near where I need to be - more no matter I can't do the BB JDE plug-in for Eclipse work not at all.

    Steps, I tried:

    1. download the latest version of Eclipse on the Eclipse site

    2 installed Eclipse

    3 downloaded the BlackBerry Java plug-in for Eclipse v1.1 (full installation program)

    4. install the plug-in

    This succeeded without error reported, and no errors in the log in the root directory but when starting Eclipse eclipses, I get without the slightest trace of what either Blackberry - Blackberry no draft, no menus, no different a simple installation of Eclipse.

    I repeated the above on a clean eclipse install but open Eclipse between steps 1 and 2, to see if Eclipse to initialize anything - same result, without success.

    Then I saw that plugin BB Setup includes in fact a full install of eclipse, so I erased my efforts earlier and just ran the installer of plugin.  This completed without error, but once again there is no trace what whether Blackberry in the eclipse resulting only install - no Blackberry project, no menus.  Another failure.

    Some recent posts offers to install the plugins and packs of component from within a clean Eclipse install via 'Help-> add new software (or equivalent depending on the version of Eclipse used)', but the often detached url of http://na.blackberry.com/eng/developers/javaappdev/javaeclipseplug.jsp just gives me a 404 error, as does a second suggested link on http://www.blackberry.com/go/eclipseUpdate

    Others recommend downloading archives separately, once again on the javaeclipseplug.jsp page, once again it is an option that is not available.

    I don't have a weird Setup or interesting, just Windows 7 32 bit with 4 GB of ram - I can't understand what he could possible be wrong!  Everything I tried, each path suggested at the forum and blog messages either do not work or use the old pages which I can't find the equivalent on the Blackberry site today.

    Any help would be greatly appreciated!  It's incredibly frustrating.

    Very strange.  What folder you installed Eclipse in?  I've seen problems if you install in a folder with spaces (e.g. "Program Files")

    Also, what JDK do you have.  You need JDK 6u10 minimum, but there are problems with the u21 and Eclipse so if you have a u21 he may not work.

  • NOR-DAQmx 9.2.2 for 6251 USB works for labview 8.2?

    Driver download OR-DAQmx 9.2.2 USB 6251 work for labview 8.2?

    Thanks in advance

    NOR-DAQmx 9.1.1 was the last version to officially support LabVIEW 8.2

    NIquist: I'm a student as to why this KB seems to have disappeared in the air.  I can see inside, but not outside.  I'll update the post you linked when I tell me what's wrong.

  • LabVIEW does not support for NI-DAQmx.

    Hello fellow programmers.

    I am an absolute beginner with LabVIEW and I have the problem that even if I installed the latest versions of the NOR-DAQmx (9.7.5) driver and LabVIEW (2013) I get the error message "LabVIEW does not support for NOR-DAQmx. Please reinstall.

    I created a task in the NOT-MAX. According to the tutorial now there should be an element in LabVIEW under "Measure i/o", but it is not. I carried the task via drag & drop in the block diagram, but when I want to turn in code, I get the above message.

    Operating system: Windows XP SP3

    Any suggestions?

    Thanks in advance

    Laura

    crossrulz,

    Thank you for your response. Well, I installed the latest version of NOR-DAQmx (9.8) and this time I also installed packages for the former executives etc and now it works.

  • LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

    Hello.

    I used labview to make an assignment of the University. As part of the im supposed to transfer the .vi file to my teacher, but all .vi files sent using the e-mail system are corrupt. When I try to open mine it gives this error

    LabVIEW: The file is not a resource file. The file is not a valid file for LabVIEW

    Unfortunately, I also lost my backup as I was working on a lab computer and didn't upload my files on the storage server.

    So I was wondering if someone can help out me. Thank you very much.

    The problem is that the email system dealt with the file as a text file. All thesequences have been replaced as . You can see this opening of VI in a hexeditor. Each VI begins with "RSRC".". Your VI begins with "RSRC.

    I replaced the two occurrences of "RSRC"with "RSRC"."and he opened in LV 8.6. Missing just a few controls and subVIs.

    I did this on Windows.

Maybe you are looking for