Muse 2014 do not save the changes.

Muse 2014 do not save the changes. Everything freezes when asked to record. Can't do a save as or the other. However, can still operate on the record... but could not be saved. Very frustrating lost work and wasting time! Any ideas would be welcome.

You cannot send the file in response to these messages in the forum. The forum software strips attachments. Files must be sent directly to [email protected] as well as a link to this topic for the context. Thank you.

Tags: Adobe Muse

Similar Questions

  • Dreamweaver cc 2014 will not save the changes I made in the css for my second media query

    Dreamweaver cc 2014 does not record changes to my second media query can someone please tell me where I'm wrong

    Please provide a link to the site so that we can see the problem on the spot.

  • Muse do not save the changes inside the text boxes

    Several (but not all) pages on my site of Muse are not saving the changes I make inside a text of some box. I can not specifically with the choice of font, size, color, line spacing and super/index. I tried to disable in-browser editing and some of the pages have since begun to save but not to save even more. After I made changes and saved the site, when I close the program and open it then later these paragraph changes back to the original.

    I am very confused about why it's only a few pages and why that is the case at all. Any ideas or solutions would be useful! Thank you!

    I think I found a solution. It seems that the problems I had with the changes that do not stick were somehow connected to the tool 'copy of development shaped at all breakpoints. Once I started into implementing shaped each breakpoint by hand he started saving properly.

  • Photos app does not save the changes, impossible to edit photos without using other applications

    'Photos' of photo editing features does not work because it is impossible to save the changes. Photos can be edited as usual, but trying to save the changes that the photo is reinstated to the State of origin regardless of changes. There is no error message, to solve the problem, I tried to reset all settings, but it did not help.

    I have iOS 9.2.1 on an iPhone 6 s.

    Thanks in advance for your advice

    I have the same question since getting my iPhone 6. Very frustrating. Several times the photo says even "revert to original" even though the changes have been never applied, as if he thinks he has saved the changes. I asked for help with an apple store and they had never seen before and had no suggestions.

  • F10 does not save the changes

    I bought a HP 500-023 refurb which was great good cheap at Microcenter.  I would like to enable vt - x, which is a feature of the i3 chip that is installed on this computer, and finally because the Commission will support the other processors I could switch to something that can run a virtual machine that is better outside the i3 chip that went into it.  So, every time I enter the bios and go to the screen that allows me to change the vt - x for 'licence' to 'disabled', that it is not possible to F10 any change.  In fact, it is no screen in the bios at all which allows F10 to save even though the bios says «F10 save/ESC exit»  I built several computers myself in the past and unlocked cores on the processors through the settings of the bios etc, so I am very familiar with the bios settings.  The question is, literally, that the changes cannot be saved.  If someone knows something about HP computers specifically which would explain this weird behavior in the menu of the bios Setup?  To say they have simply disabled the ability to make changes is a total deal breaker and will return just the machine to the store.

    OK as it turns out I have F10 CAN save the changes to the bios settings and activate the HP motherboard Joshua 500-023 device virtualization.  The problem was that I just changed the BIOS with my keyboard not HP.  It's a Microsoft Wireless ergonomic keyboard that I use always.  I would never in a million years try to use cheap plastic keyboard that came with the computer, but read on UEFI and how it detects hardware confidence that it crossed my mind that maybe I should just plug the supplied keyboard with the computer.  YES... that's all it took.  I could then F10 and save changes to the bios.

  • Custody of Muse on crash - does not save the changes...

    I worked with Muse since the launch of the beta - I like the program, but the last 3 months, it was a pain in the...

    I'm working on 4 different sites - sometimes I got the error '#1009-' in 3 Web sites (thankfully, I'm normally able to restore with the latest changes).

    In the 4th website, it appears whenever I try to save the site (no matter if I use 'Save' or ' Save as ').

    Until today - now I get the error below which causes all changes to disappear

    Error01.PNG

    Any suggestions?

    I'm afraid that this 'virus' will also infect other sites, I'm working on that...

    Thanking you in advance for your help.

    NB. I use the release version:

    v1.0, building 948, CL 767416

    Duration of air: 3.2.0.2070

    It looks like at some point, a corruption of minor was introduced in your file. Muse made a thorough check of a file during a "Save as." If you get an error message and stop when you do a save as, you really need to send us the file for diagnosis and repair. Continue to work with a corrupted file may amplify the problem.

    Please send us the .muse file at [email protected] as well as a link to this topic. If the file is larger than 20 MB, you can use a service like Adobe SendNow, SendThisFile or WeTransfer.

    It would be useful that you could also send the "MuseLog.txt" file in your Documents folder. It must contain the information of all the errors you have encountered. It can help us better understand the source of the problem. Thank you.

  • Y at - it an option to "do not save the changes" to a VI

    Hello

    Often times I will open VI and maybe I clicked through or navigate the block schema tab controls...

    In any case - LabView does not allow me not to save these changes, which then makes it look like I edited the VI.

    Is there a way where I can click to NOT SAVE when I close, rather than to rely on when I have to close the project and then I hope that I can remember that I've changed and who I just opened for reference?

    Michael

    Before you close the VI, you can select file | Then return the file colse.

  • Acrord32.exe (Windows 7 and Acrobat cc) breaking, can not save the changes, Windows Explorer crash earlier

    Recently decided to upgrade to Acrobat DC after discovering that she will allow me to OCR files that previously forced me to spend of TIFF, and then back.

    I downloaded the program and installed today.  I was the conversion of Acrobat 9.  After that I started uninstalling Acrobat 9 Pro, Windows Explorer has started crashing.  I finally restored the computer

    I checked the Microsoft forums to see what could have gone wrong, and they seem to indicate that I should run sfc in the prompt, then see if there are problems in the registry. Here, of course, began with today or yesterday (which doesn't make sense - not sure that the report gave me irreparable files, or both fixed and fixed, or what). Other research suggests that I do a disk cleanup, and since then I had the problem of Windows Explorer.

    I tried then just install Acrobat DC on Acrobat 9.  This seemed to work properly.  However, now I have problems with Acrobat to crash (although the window remains open?). The message says that acrord32.exe is the culprit.  In addition, a number of my PDF files cannot be replaced - if I want to save my changes, I have to save to a different folder, delete the old file and move the other in its place.

    It's basically a nightmare, and I lost a ton of productivity today putting out fires.  Do not have these problems until I started playing with Acrobat.

    Please give me some suggestions.

    Thank you

    In fact, I could hope to find the solution on this thread:

    Adobe Reader DC contains errors and crashes with Windows Server R2 2012

    Going to see how it goes with the preview pane disabled (although she will suck if I can't use TI - hope you guys who patch).

    Also, add a folder by the instructions under C:/User / [USER] / AppData.

    In the hope that this problem will be solved in between.

    EDIT: It looks like it fix the problem.  Acrobat Pro DC now works without any problem.

  • ESXi 5.0 - do not save the changes SD. changes after restart

    Try to solve problems with USB passthrough and needing to make changes to the configuration. Whenever a change is made, it is destroyed after a reboot.

    After digging around the shell, it seems to me that the system uses local.tgz configuration instead of/bootbank/state.tgz file. Ive brought changes, and each time I checked these files. In the esx.conf file I see that nothing changes on the file local.tgz but it does on the state.tgz file. This may not mean anything, and I could look at this all wrong. I confirmed that backups are spend the hour + 1 min and I made manual backups with the script/sbin/auto - backup.sh.

    One thing to mention is that when I do edit and run the auto - backup.sh I see that it lists the changes, and I see that it is what I guess it is in the file local.tgz.

    I read a number of different ways to this address, but none seem to be able to help.

    I have attempted to copy the file state.tgz on the local.tgz file and change the permissions on it. To restart, local.tgz file returned to the date that was the 13th but the state.tgz file remains to day it seems.

    I think I should be able to point just sort the system starts on the state.tgz file but I don't know if this is possible / should already be the case / makes sense given that we use an SD card to begin.

    I read in this document http://www.vm-help.com/esx41/adding_files_to_state_tgz.php that if you use an SD card, it will start on the local.tgz file.

    I used this guide http://store.vmware.com/store/vmware/en_US/DisplayProductDetailsPage/ThemeID.2485600/productID.28435970

    to see if I could adjust the location of the file... scratch that change does not persist after a reboot.

    I think that the only way I could solve this problem is to start on an iso of linux and to make changes.

    Any ideas on how to solve this problem or there at - it a way to indicate to the synchronization local.tgz and state.tgz system?

    Thank you.

    I got the problem solved.

    For all those who need assistance on this I hope this helps:

    Found that when under the configuration of host-> advanced if USB devices are passthrough value, they will not be monitored by the usbarbitrator service. This service allows for the virtual machines to use USB devices.

    I could not change it because the system does not update the SD card when configuration changes are made.

    Two options:

    Edit the file esx.conf on the SD card

    or

    Re-install ESXi

    I went with option 1.

    used this post

    How to disable Passthrough ESXi my conclusions

    Ubuntu iso desktop to live starting in the system.

    From there on, I was able to edit the files and restart ESXi. This fixed my issue.

  • ClearType Tuner do not save the changes

    I can't get the tuner to record changes in pages 3 and 4, as I can in 1 and 2.

    I use Windows 7 Home Premium 64 bit on an Acer laptop nine.

    Is there a solution?

    Hi fish,.
     
    Thanks for visiting the site of the community of Microsoft Windows. In order to focus more on your particular situation, it would be better, if you could post in a new thread.  Announcement new threads are taken to mitigate the confusion caused by more than one display on similar topics, which allows us to focus on each client individually
    Thanks for visiting the site of the community of Microsoft Windows
     
    You can ask your question new here...
  • Unable to save the changes in the resolution of the screen on Satellite P20

    Recently, I have problems with the resolution/quality of images on my laptop P20.

    When I try to remedy this in the tab settings of Options Diplay it me does not save the changes to the screen resolution or image quality. I am currently using the default monitor on NVIDIA GeFOrce FX Go5200.

    Any ideas?

    Hello

    For all the ideas give us more information please. I just know that the resolution of the standard screen for this laptop is 1440 x 900 and if the right display driver is pre-installed to avoid any problems.

    I used Satellite P20-303 (nVIDIA GeForce FX Go5600) nearly two years with the original display driver and have never had any similar problems.

  • Why won't my router save the changes to 192.168.0.1 DNS settings? (DGN2200v4)

    I just bought a DGN2200v4 and successfully connected to the internet. However, it took me ages to figure out how to save the changes made to DNS settings. (I wanted to use "OpenDNS" on 208.67.222.222)

    It turns out that if I connect to the router through 192.168.0.1, I can not change the DNS settings. When I click "Apply" after entering the new numbering, it takes 30 seconds or more for the progress bar for complete, but no change is made. i.e. it does not save the changes I made.

    If instead I connect to the router via www.routerlogin.net, changes are correctly saved after clicking 'Apply', with the progress bar by taking 30 seconds or more.

    I tried several times with consistent results. Why 192.168.0.1 not working then as www.routerlogin.net don't? I thought they were equivalent - the webpage 'Netgear genius' is identical on both...

    JC

    JCA says:


    Also, do you recommend make a factory hard reset after the firmware update, or there at - there no need?

    Sorry for the late reply.

    Personally, I tend to reset factory and re - enter the settings manually, unless I've saved a backup of this same version of the firmware. However, I use Netgear as Access Points routers and so I have little data to re-enter. To some people will say that a factory reset is useless and very often they would be correct, but the effects of factory reset no when it may be necessary are often difficult to predict. I was moderator on these forums for a dozen years, and have seen hundreds of threads where the solution to the problems after an update of the firmware has been at the factory to reset the router.

  • Adobe Muse does not save the file

    Good afternoon. I have a problem with the file Adobe Muse. Once, I add to one of the accordion Widgets pages, Adobe Muse does not save the file. All menu files is no longer active.

    link to a screen problem

    Yandeks.disk

    link to a Web site already recorded and released

    price Esenina

    Please send your .muse file to my attention at [email protected] along with a link to this topic. Assuming that it is a recurring problem, it would be very useful to have more details on exactly what is being done between during the last activated menus and when they became disabled. A registration screen would be wonderfully helpful.

    If the file is larger than 20 MB, you can use a service like Adobe SendNow, Dropbox, WeTransfer, etc. (if you use a service, please include your email address in the body of the message back, given that not all services to include it in the invite sharing they send.)

    Thank you.

    -Zak

    Zak Williamson

    Senior scientist

    Adobe Muse

  • Why is my Windows Photo Gallery not allowing me to save the changes I made to my photos?

    I've always been able to edit my images under "fix" and then save the changes. However, now I get a message that the changes cannot be saved because an error with my Windows Photo Gallery. Anyone know what can possibly be wrong?

    Go to this thread and the possible error code in their entirety, the list

    http://windowslivehelp.com/forums.aspx?ForumID=cafb0556-8959-49b9-AFEB-635314aa02f3

  • Firefox and Palemoon does not save the settings of a Web site.

    He is a recent problem. I use Firefox 25.0.1 because progress of download in Firefox 26 changes are unacceptable.

    I use www.nzbindex.nl a lot - Out of the blue Firefox will not save the settings, but will Google Chrome. In my view, that the problem is a Java problem. Any advice would be appreciated.

    This can be caused by corrupted cookies or cookies are blocked (check the permissions on the subject: permissions page).

    You can control and manage permissions for the domain in the tab currently selected through these steps:

    • Click on "Site Identity" (globe/lock) in the address bar
    • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
    • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

    Clear the cache and cookies only from Web sites that are causing problems.

    "Clear the Cache":

    • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

    'Delete Cookies' sites causing problems:

    • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

    It is not advisable to continue to use older versions of Firefox with disclosed security vulnerabilities.

Maybe you are looking for