Muse and preview mode are not the same

Similar Questions

• CAB and PS6 images are not the same

  Still clinging to SP6 for now.  Recently, I noticed that the images open in ACR PS6 look the same as they did when seen in ACR.  As I open as smart objects, I can return to the cab and determine that the image appears without a doubt different.  PS6 image seems to be more washed out and dish than the same image in ACR.  Here's shears to show my settings:

  ACR

  

  PS6

  

  I use a Dell 2410 calibrated with an i1 Display Pro.  I checked to make sure that all my drivers are up to date.  Only recent changes has been upgraded to Win7 to Win10 and update some brightness mixing of stocks that I use.

  Someone has suggestions that might provide a clue as to what is the problem?

  No, it was just a diagnostic test. Now, we know that the profile is indeed the problem, but must know why the i1 profile is initially either PS or ACR choke.

  The first thing to try is the profile policy. It may be the specification icc version 2 or version 4. Go with v2 if you have this option somewhere - v4 it is still not widely supported. Secondly, and perhaps more likely the issue, is that the profiles can be based on tables, either based on the matrix. Based on a table (usually called LUT) is more accurate, but also more complex and prone to error, more focused on the matrix (sometimes called curves or Gamma in some calibration software).

  I did use i1 Profiler in a while so I don't remember not where you find these options. But I'm fairly certain they are there somewhere, set up a new calibration and seek. The security options are then v2 and profiles matrix-based.

  BTW, the new profile that you will replace Adobe RGB, so you don't need to do anything special to change back.

• Columns and rows created are not the same in a browser as in DW

  I tried to create 5 column using CSS.  I was very happy when it worked, and it worked on mine!  So before you start to copy my code for created about 19 lines of the same columns that I created, I looked in a browser to see that it is in every sense.

  I did put the direct page because I don't want my potential customers, seeing this, but if I have to for someone to help me I'll do it. My images will jump to the right of the screen in a browser, but as in DW said everything looks good.  Hope someone can help me please.

  < div id = 'column-container-full hunting' >

  < div id = "column-container-left" > * of HERE IS MY HTML

  < /P > < p > DESIGN

  < / div >

  < div id = "column-container-Center" > < DETAILS P > < /P >

  < / div >

  < div id = 'column-container-right' > < BUDGET P > < /P >

  < / div >

  < div id = "column-container-rightA" > < STANDARD P > < /P >

  < / div >

  < div id = "column-container-rightB" > < PREMIUM P > < /P >

  < / div >

  < / div > <! - column-cotainer-full hunting end - >

  < div id = 'column-container-full hunting' >

  < div id = "column-container-left" >

  "< img src="images/photos/21.jpg "width ="297"height ="234"alt ="field of 12 x 24 shelter"/ > < / div >

  < div id = "column-container-Center" >

  SHELTER 12 x 12 < P > < /P >

  < P > skates in wood 12 X 12 < /P >

  < P > kick panels OSB 11 MM < /P >

  < P > Kick Boards PLY 12MM < /P >

  < /P > < P > wooden DOOR

  < /P > < P > SKIP TRACK

  < / div >

  < div id = "column-container-right" >

  < P >£ 750 < /P >

  < P > < /P > 150

  < P >£ 90 < /P >

  < P > < /P > 120 pounds

  < P > < /P > £150

  < P >£ 40 < /P >

  < / div >

  < div id = "column-container-rightA" >

  < P >£ 1000 < /P >

  < P > < /P > £150

  < P >£ 90 < /P >

  < P > < /P > 120 pounds

  < P > < /P > £150

  < P >£ 40 < /P >

  < / div >

  < div id = "column-container-rightB" >

  < P >£ 1300 < /P >

  < P > < /P > £150

  NA < P > < /P >

  INCLUDED in the < P > < /P >

  < P > < /P > £150

  < P >£ 40 < /P >

  < / div >

  < / div > <! - column-cotainer-full hunting end - >

  < div id = "footer" >

  < ul >

  < li > < a href = "index.html" > home < /a > < /li >

  < li > < a href = "stables.html" > stables < /a > < /li > ""

  < li > < a href = "shelters.html" > shelters < /a > < /li > ""

  < li > < a href = "gallery.html" > Gallery < /a > < /li > ""

  < li > < a href = "pricelist.html" > price list < /a > < /li > "

  < li > < a href = "usefulinks.html" > < /a > < /li > useful links "

  < li > < a href = "contactus.php" > contact us < /a > < /li >

  < /ul >

  < class p 'foot of page-text' = > Copyright 2014 Bristol equestrian Services < /p >

  < / div > <! - end of footer - >

  < / div > <! - end wrapper - >

  < / div > <! - end outerWrapper - >

  < / body >

  < / html >

  CSS

  #column - container - full-width

  {width: 100% ;}}

  }

  {#column - container - left

  	Width: 300px;
  	float: left;

  }

  {#column-container-Center}

  		Width: 300px;
  	float: left;

  }

  {#column - container - right

  	Width: 100px;
  	float: left;

  }

  {#column-container-rightA}

  	Width: 100px;
  	float: left;

  }

  {#column-container-rightB}

  	Width: 100px;
  	float: left;

  }

  Try adding overflow: hidden; and see if that solves the problem:

  {#column - container - full-width

  Width: 100%;

  overflow: hidden;

  }

• product code and product key are not the same...

  i solve this application system 32 product code #. the only thing I found on the bottom of the laptop near that long is the product key and it is not long enough.  where can I find the "product code"?

  What is the 'solve this system"and where did you find (link, please)?

  What is the exact wording of the message you are trying to answer to?

  The term "product code" is often loosely used to mean several different things, so the context and the wording of the exact message are important.

  For your information...

  Usually, the number on the holographic label on the bottom of your laptop is the license key Windows of 25 characters (xxxxx-xxxxx-xxxxx-xxxxx).  Do NOT publish this type of key in this forum or anywhere else online.

  Sometimes you will see a reference to a "product ID" or product code.  It is usually a number of 20 characters according to this format: xxxxx-yyy-zzzzzzz-zzzzz.  This identifies the version of Windows.  On a computer 'brand', the second group of characters is OEM, as in 55274-OEM-zzzzzzz-zzzzzzz.  In this example, the 55274 refers to a generic version of XP Pro OEM.

  Microsoft Office programs use a product code of 32 characters or a Globally Unique ID (GUID) such as
  {WXYYZZZZ-6000-11 D 9 3-8CFE-0050048383C}.

• Separators from decimals/mile are not the same for the number and format of thousands. How can I get even. ?

  I installed the version 11 of Pastel partner and the error message "separators from decimals/thaousand for number and currency formats are not the same" how to get this right?

  Pastel partner support site through and their instructions/FAQ

• Apex 5, call a modal page, set page elements, in values referenced title page elements are not the same (correct) than the item itself

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO., DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can run to display the values of the correct point in the title of the page corresponding to the values of the correct page element (that I have hidden).

  Y at - it something more to do, or it could be a small bug?

  I've created a little demo app on
  https://Apex.Oracle.com/pls/Apex/f?p=75955:2

  WS: AMLWS001

  Demo/demo (developer is)

  Please see the report 1.

  Thank you in advance!

  André

  Hi andremi,

  andreml wrote:

  Hello

  Apex 5.

  IR (departments) on page 2 I want to open a modal page 3 (classic report) with the detail data (from emp) for a Masters depno via a link on depno column.
  In Page 3, I created two elements P3_DEPNO and P3_DNAME. These elements are defined in modal page 3 of page 2.
  When I do these two visible elements on page 3 I can see, the values are set correct according to the value in column (depno) link on page 2.
  However, I would like to place these element values in the page title of page 3
  Title: PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME.

  It happens that the values mentioned in the title of the page are not the same (good) as in the items himself.
  Initially, they are NULL. Only when I refresh page 2 the values change but remain the same (last called depno) as long as I'm doing a new refresh of page 2.

  I wonder how I can make it work to display the values of the correct point in the title of the page corresponding to the values point right page (what I have hidden).

  Y at - it something more to do, or it could be a small bug?

  Page title is rendered before the page elements, that is why is not highlighted in your title.

  I don't think directly, we can use the page as a page element value.

  Creates a copy of yours and made the change it new App id - 45390

  There, I created a static area without a model before your report area and put your article into that.

  then displayed title PGE for DepNo: & P3_DEPNO, DepName: & P3_DNAME. for the area of your report.

  Kind regards

  Jitendra

• drop table left-right scale of the value axis are not the same scale

  http://img20.imageshack.us/img20/6264/questionk.PNG
  
  the scale of the axis left and right are not the same.
  
  How to configure?
  
  Thank you very much!

  Hello

  Try this
  Chart, Goto Advanced properties-> check the line sync and the axis of the bar
  This will make the two scale of identical values.

  Thank you
  Vino

• Information VCOPS and the high command are not the same.

  User complains that the machine does not work have enough RAM. VCOP shows that all right. Active comments (KB) - 8 327 788 Maximum of all time. A currently much cheaper. high command shows 10,600,000 KB or higher. Where does get vcops data? And how he can trust?

  And another question. how fast it pulls graphics? Now 10:45 but METRICS TABLE is pulled only at 8.15 (pic)
  

  According to me, there are a lot of related info on these forums, search a bit.

  vc_ops takes the info from the same source, questioning vCenter, who gets to one or several corresponding ESX hosts.

  However, it is the poll every 5 minutes and taking values averaged for that interval.

  Lag displayed points to time synchronization problems in Setup - make sure your vCenter vc ops both are configured correctly for the NTP and time on both is the same.

  Another reason could be if you browser (client machine) in the different time zone which is set up on ops vc

• Remote Desktop works when my office and cell phones are on the same system, but then when I take my laptop home, it does not work!

  I recently updated my computer to Windows 7 Pro.  I also have a laptop running Vista Pro.  I have configured remote desktop on my Windows 7 machine to allow my laptop to access and it works fine when I work the two machines on the same Linksys WRT54 router, here at my small business.  I have configured my router to allow communications to port 3389, but as soon as I take my computer laptop home, I can't access my desktop computer.   I have to configure my home router as well?  It's a new Motorola ADSL router/modem and no place in the configuration to allow port forwarding or port address.  Help!

  Hello

  We are unable to access a computer from another computer if they are in another network by using remote desktop.

  If they are in the same network, use the following links as reference:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  Hope that helps.

• In Premiere Pro and video export colors are not the same, why?

  Hello

  So, I filed a clip in speedgrade and exported from Premiere Pro.

  Strangely when I play the video with vlc it does not show the colors I had in Premiere Pro.

  Now, when I import this clip in AE it seems identical to SpeedGrade and Premiere Pro.

  After have exported them sequelae with and without the color profile converter efffect set to sRGB, as well as with and without the workspace defined as srgb, they all look the same, off the coast of color

  Did I miss a step?

  VLC is up to date?

• CC of InDesign for Mac and PC are not the same?

  I have creative cloud on a Mac and a PC. I can't open Indesign Mac on PC files and it's frustrating. The whole point of getting Adobe CC should be able to work on both platforms. The Mac of Indesign version is showing that 9.2.1 and the PC version is showing that the version 8.0.2. If you're never going to get the PC version, the same, how can I return the Mac down to version 8.0.2 so files will be interchangeable?

  Sounds like you have CC Mac, but only a CS6 version (that you could get subscription) on the PC. Make sure that you install CC on both machines.

• Photosmart Prem C410 all-in-one: our laptop and printer AiO are on the same network, but laptops can 'see' printer

  Our two portable Windows 10 both our Photosmart Prem C410 AiO printer are connected to the same network (as evidenced by checking the name of the network of all 3 devices).  We were able to connect between laptops and printer without problem (printing, scanning, etc.).  A blow, or laptop computer can "see" the printer.  I uninstalled and reinstalled the printer on two laptops, but when I enter the IP address of the printer as part of the installation process, I get the error message (on computers) "your printer is not found on your wireless network.  I used the wireless Wizard connect to the printer, restarted the wireless router and restart the two laptops... the IP of the printer stays the same every time and laptops and printers continue to be connected to the same network named.  Help

  On the printer's wireless radio was 'on' but I clicked OK anyway.    Disconnected and reconnected to the network and noted the address IP of the printer had changed.  Laptops are now able to see the printer.  Problem is solved.

• Any paragraph styles are not the same as the original document

  I use InDesign CC 9.2 x 64

  I have the document with a series of master pages and paragraph styles. I wanted to move them in a blank document, as well as a few pages of the original document.

  In the new document I loaded master pages and paragraph styles, and everything seems to be okay. I moved a few pages in the document and paragraph styles do not seem to get the same thing. It seems greater than in the original document line spacing, but I can't find what the problem is

  It's really annoying, since the point of the whole of paragraph styles, it's that they ensure consistency!

  Any ideas?

  Thank you!

  What can go wrong with it is that the paragraphs are aligned on the grid of reference set in the preferences.
  Two different documents can have two different settings for it. Check the baseline grid in preferences and adapt one to the other setting.

  Uwe

• Droid A855 USB cables are not the same.

  I have nearly 20 of the Verizon Droid. We used Treo pro for Sprint, but they have been undermined by the poor coverage of Sprint and a rate of 25% of failure in a year.

  When I got the Droid A855, I tried using that Treo Chargers and it worked very well. However, if I used a USB cable from the Treo to a USB charger, the screen would go crazy until the cable has been removed. I got the same results of OEM Samsung cables that would be compatible with the Droid. I had to return 10 of the Samsung cables after attempting to convince the seller that they do not work on the Motorola Droid A855.

  After reading some of the discussions on this site, I got the impression that there is a USB standard following cell phones. My experience is just the opposite. Anyone can comment on this fact?  Can I buy a cable from someone else than Motorola and operate in the USB Chargers?

  I believe that the question can be some of your instruction ect but shielding the supply itself is a more important factor. USB is not very consistent as a source of energy. The only battery charger, I bought today from verizon said he did not use a normal usb computer cable and charge the batttery. I've had questions, thinking that it was the cable, experimenting different supplies of cables and charger it is the charger port or usb, not on the cable. I also use a generic cable and one who came with an LG Dare phone and three others, seem all verizon/Motorola. All work fine as long as two or three lightwieght chargers are not used. These same circumstances are repeated with the Ipone has my son, even if we don't change cables, Chargers fair.

• Why there are not the same on second VI Listbox?

  Hello

  I want to change the color of the items of the listbox displays as shown on ListboxTest1.vi.  I want to duplicate the same behaivor of ListboxTest1.vi on the second vi: Compare2TextFilesX.vi.

  ListboxTest1.vi works fine but not Compare2TextFilesX.vi even if they both have a similar code.

  If you want the same action simply use a shift register instead of use the iteration. Initialize the registry at offset 0 and not 1 in the case of false and just run the wire through the case of true.