Muse CC 2014 will not go beyond the start screen

Similar Questions

• Why google chrome will not remain on the start screen

  Well let's go.  When I down load google chrome and place it under windows 8 Start menu and open my email account, it works very well at this point. then when I close my google mail chrome disappears off the coast of my Start menu.   It remains in the Quick Start menu and multiply, here, whenever I chaque fois que j' ouvre open google chrome and open the e-mail.   It just won't stay on the start menu.   Even a bestbuy geekquad tech could not understand it. outside.

  Hi Dale,

  I suggest you to uninstall and reinstall Google Chrome. Then pin Google chrome for the splash screen.

  Follow these steps to uninstall the game.

  a. press the Windows key + X , and then select Control Panel.

  b. Select uninstall a program

  c. Select Google Chrome in the list, and then select Uninstall.

  Now, go back and go through the article to know how to pin to the start screen.

  Has Joust applications, Web sites and more at the beginning

  http://Windows.Microsoft.com/en-us/Windows-8/adding-apps-websites-to-start

  Let us know the results.

• Problem installing windows 7. It will not go beyond the Welcome screen.

  Hello people,

  Good so I recently bought an SDS and trying to do a clean install of windows 7 but it doesn't let me get past the Welcome screen. Before even the colored balls appear and it just hangs there. I am really frustrated and tried a few things but nothing I try seems to work.

  Any help would be so appreciated!

  Hello a tad noob.

  It shows the SSD at all? I would check to see that it is indeed to be picked up by the BIOS, and if not, check the cables.
  Sometimes, the Windows installation can chuck a fit when it detects a disk with a sector of boot/MBR not valid and won't install it. To resolve this problem, you can try the following
  1. start Windows 7 disc.
  2. when the Welcome screen is displayed on the Windows installation, press SHIFT + F10, which will display a command prompt.
  3 type 'diskpart' (without the quotes) and press ENTER.
  4 Type "list disk" and press ENTER.
  5. If all goes well, you can see your SSD in the list. You should see a number identifier. Now type "select disk X" (where X is the number of your SSD) and press ENTER.
  6. type 'clean' and press ENTER. He will write an empty MBR, YOU WILL LOSE ANY DATA ON THE SSD if you had anything on it.
  I hope that one of these tips helps you:
  )
  suggestion of technocrat.

  Let us know if that helps.

  Marilyn

• Help! My HP TouchSmart laptop will not go beyond the logo screen!

  My HP TouchSmart tm2 with VL618AV product number lights after the logo screen. I really don't understand why it is happeniing because it's just more than a year. I have Windows 7 and there are errors on the computer. Please help me.

  Yes-HARD drive is the hard disk. No way to know, without more testing, if it's hdd or other material causing a no don't start machine. Try to remove to see if you get any further as I mentioned above.

• Satellite A300 will not get before the start screen

  Hi all

  had a problem with a laptop A300 about 2 to 2.5 years old. I just installed windows 7 prof and it worked fine for about 3 days and then all of a sudden it blocked start.

  He gets to the toshiba start screen and then reboots. He doesn't even try to start windows. You can go into the bios and make changes, etc., you can not press f8 to load in safe mode, only it does not even come to that.
  You can press f12 and raise the start menu and try to boot from the CD but this new fact not work and it just restarts again

  I don't know how else to troubleshoot it. I don't think it's a motherboard problem can you enter the bios.
  It could be a HARD drive problem, but then I thought it would have gave you a warning message of any (no available boot device) and you can see the HARD drive in the bios and would have thought that it would have started at least on a CD.

  The only things I can think about are drive problem HARD for the problem RAM or motherboard problem.
  I think install win 7 to 3 days there is just a huge coincidence?

  Any help would be great. Thank you

  Hi hitenkacha,

  Hmm... Which is really strange, if the laptop restarts after the Toshiba start screen but it doesn t happen if you go into the BIOS or boot menu...
  So, if you go into the BIOS and wait a few minutes, he doesn t restart?

  Yet one thing would be interesting to know: what happens if you try to boot from the recovery disk Toshiba? Generally, it should still possible to boot from this drive if it s ok.

  Check this box!

• Windows Anytime Upgrade will not go beyond the first screen. He tells me that my address is not valid, even if it is correct.

  I get my exact address, all fields of the form are 100% correct and it does not tell my that my address is not valid. I'm confused, because I have never had any problems to enter my own address, nor usually have problems try to give my money to people. I'll have to waste time on this is pretty insulting. Windows 7 has been well otherwise.

  Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7install/threads

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• E260 will not go past the opening screen

  I got my 260 E for about a year and later that yesterday I went to turn it on, but it remains on the logon screen. Enter mode 'sleep', but I can't listen to music or find out anything because it will not go beyond the opening screen. The second of 10-15 soft reset I tried a hundred times, but it does not work.

  If remove/insert the battery did not work, the next step would be to format the drive.  You can also try to update the firmware.  I hope that you have a model v1.  What does say on the back of the drive?  Do you see a blue Sansa logo on the splash screen?  If so, you have a model v2 with no recovery mode.

  Assuming you have a v1 with the recovery mode:

  1. Turn off the player.
  2. Slide the key lock (to headphone jack).
  3. Press and hold the RECORD when connecting to the PC.
  4. Output RECORD when the "Welcome to recovery mode" message on the LCD s drive.
  5. Open my computer/Windows explore and see if you can find a new "16 MB - FORMAT" labeled removable flash drive
  6. Right-click on 16 MB-FORMAT and select new folder.
  7. Name the new folder "sansa.fmt" (without the quotes).
  8. Use the remove safely icon in the system tray.
  9. HOLD reset in the unlocked position.
  10. Disconnect the player from the PC.

  The player must, by seeing the folder sansa.fmt in the root directory of the drive, proceed to format itself.  Pay attention to any error/success message see you.  If all goes well, it will tell the full format and then to restart.

  DO NOT TRY TO FORMAT THE VOLUME 16 MB-FORMAT!

  If the format does not work, the next step is to try to update the firmware.  Go to the correct sticky message and download the firmware for your region .24A (assuming that he is a player of v1).  Drag and drop the embedded .mi4 and ROM files of archive of the firmware in the root directory of the 16 MB-FORMAT drive.  Make sure that the files end up in the root directory and not in a subdirectory.  Unplug and restart the player as before.

• Satellite L500 will not load beyond the screen "Welcome".

  Hello

  My Toshiba Satellite L500 laptop will not load beyond the screen "Welcome". The right slider thing keeps going around and around, but won't on my desk.

  Last night, he went into a temporary profile and he got a message saying "another profile cannot load at this time please try again later".

  Any help would be greatly appreciated.
  Thank you
  Kara

  The error message is not known to me and also looking in google didn t get advice.
  Maybe your Windows operating system is confusing upward.

  Have you tried to boot Win 7 in safe mode?
  Try this. Restart your laptop, press the F8 key.
  In advanced startup options, select the option called Mode without failure.

  If the laptop does not start Safe Mode, try the last good known Configuration option.

  If this n t help, try to fix my computer. Here, you can choose between different settings.
  Who could solve that problem is HARD drive recovery that helps you define the notebook to factory settings. But it also means that your disk should be formatted!

  So be aware of this!

• Repair Windows installation will not continue beyond the mark of 26 min during fill the stage of installation

  Hi there all your PC gurus

  PC fails to complete a repair of Windows XP installation. It does not go beyond the mark of 26 min during the installation phase ends. You can still move the mouse around, however installation is not continue beyond this point.

  The 2 following errors are received:
  Error installing com +.
  "of the subcomponent com + threw an exception during the processing of the OC_complete_installation Setup message.
  d:/xpsp/com/com1x/src/complussetup/Comsetup/csetuputil.cpp (line 3429)
  Error code = 0x8000ffff
  Castastrophic failure
  Cannot run the function ' DllRegisterserverc)' in
  c:/Windows/System32/clbcatq.dll ".

  Corrupted file Unregmp2.exe
  The file or the directory c:/documents and settings by default/user/start menu/programs/windows Media.lnk is damaged and unreadable. Please run the chkdsk utility. »

  PC is a Dell Vostro 1510, it is only a couple of years.

  Can someone please?

  The initial problem was that the PC did not go beyond the page of Windows to start upward. So I had to do an installation of the Dell windows XP disk repair. But I couldn't boot from the CD, (even after changing in the system BIOS boot order) to work around this problem, so I had to disable the boot on the other upward options being - HDD, USB etc. so only if it start from the disc.

  After completing the first part of the repair facility, the PC restarted to complete the second part of the installation, however I got an error message "the Kernel32.dll file is possibly corrupt. The header checksum does not match the checksum calculated.

  After some research, I solved this problem by using the windows recovery console to extract a new copy of the kernel32.dll from the windows XP disc. It seemed to work. The second part of the window repair facility restarted successfully, but now the problem is it will not complete installation, it gets stuck/not will not go beyond the 26 minute mark during the phase of "complete installation."

  It has been full of hiccups. I'm not a person of computer tech at all, but have managed to get so far at this stage.  Can someone please please help, very much appreciated.
  Thanks :)

  Hello

  Follow the steps from the link: you receive the error message "UNREGMP2." EXE - Entry Point not found"when you upgrade or repair Windows XP: http://support.microsoft.com/kb/889288

  You can also try the steps from the link which is very useful for troubleshooting Windows XP startup problems:

  How do I recover from a corrupted registry that prevents http://support.microsoft.com/kb/307545 of Windows XP startup

• Can't reinstall Vista. Because Vista will not get to the Setup screen.

  Hi people. Got a prob a little. Vista stopped booting the other night. So, I tried safe mode, and it hung on crcdisk.sys. So, I decided to get in shape. Problem is, it will boot from the DVD, but will not load / access the Setup screen (I waited for 7-8 minutes and nothing's happened, shows just the thing with the green bar).

  Not too sure if it's because the hard drive is 1 TB (but Vista was on the same front hdd with Windows 7). I tried to remove the 2 GB of ram (I use 4). No go. Tried another DVD rom, not go. Removed USB devices that have been connected. No go. I know that the DVD itself is fine. I tried on the other PC here, the installation screen came within 2-3 minutes. But his is not a 1 to (its 250 GB) the only DVD that will work / I install is the Windows 7 DVD.  So, how can I reinstall Vista?

  I deleted all partitions / recreated with the Win7 installation as well. Still couldn't get Vista to get to the Setup screen

  Any info appreciated

  Thank you

  Finally fixed it. I read that USB legacy can also cause this. So, I disabled it. Everything is good. Managed to get to the Setup screen, then reinstall Vista

• New HP Pavilion will not go beyond the screen with the "HP" Logo and the "circle of points."

  I recently bought a computer HP Pavilion (HP Pavilion 10:10 - e010nr). It was my first experience with Windows 9.1, but everything seemed to go OK. Then, yesterday when I had to retype my password, the computer began to run very slowly and then seemed to lock-up; It would not do anthing. I held onto the "button until the computer turns off and then restarted. When it restarted, it didn't go beyond the initial screen that shows "HP" in a blue circle and the small circle of the small white watch points there work but nothing ever happens. (I tried this many times, but the same thing happens. If anyone can help me to go beyond this opening "HP" screen, I would really appreciate it.

  Hi Referee06. I understand that your computer does not load past the HP logo at startup. To resolve this problem, proceed to the section "the computer crashes to the screen of the HP or Compaq logo or the Windows loading screen" in this document: computer does not (Windows 8)
  
  Let me know how it turns out.

• Could not Explorer beyond the start page of Internet Explorer, Firefox, Aol, etc.

  Original title: impossible to surf after updates

  Yesterday, I found that my computer was restarted after a large number of windows updates, mainly to do with the Office.  I couldn't Explorer beyond the start page of Explorer, Firefox, Aol, etc.

  I had to use recovery and restore a day earlier, and then everything worked. But this morning the updates had been installed re and the same problem exists now. Namely, I can't go beyond the first page of a browser. It feels like Groundhog Day. Can you help me? Paul

  Hi Paul,.

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you can't access the internet after you install the latest update. Could you please give us the number of the update which settle and causes the problem.

  Normally, updated installation does not cause this problem, but if it causes in your case, please provide us with the number of the update so that we can find the root cause and provide you with the appropriate resolution.

  The problem may be caused, if there is a miss match the IP address configuration. Then I suggest you to release and renew the IP address. If you are unable to use the browser the problem is related to their drivers, or network adapter settings. I suggest you to try the steps in the article mentioned below and see if it helps you to solve the problem.

  Method 1:

  Release and renew the IP address of your computer:

  1. go to Start, click all programs and open the Accessories.

  2. right click on command prompt in the list programs and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, or click OK.

  3. in the command prompt, type the following command and press ENTER:
  enough ipconfig and press ENTER.

  4. type ipconfig / renew and press ENTER.

  5 type Exit and press ENTER.

  Method 2: Running convenience store network.

  Automated convenience store is a tool that can find and automatically fix problems with your computer. These utilities are not designed to solve all the problems, but they are useful to try because they can often save your time and efforts.

  Run the network troubleshooter utility:

  Additional information:

  You can also view the following link.

   

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows/cant-connect-Internet#1TC=Windows-7

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Kind regards

• My hp will not go past the blue screen

  I tried everything I can think of.

  Safe mode

  Restore and system recovery

  Cleaning system

  nothing will make me past the blue screen

  Model number G62-244

  Please help me!

  Hello cannary77:

  Sorry your computer broke down. Thanks to updates from Microsoft. Well I see you tried safe mode and couldn't open. I hope you have your recovery disk. It's the time to use them. Just insert the disk and turn on coomputer. If your memory or your hard drive was not damaged it must start the process of full recovery. Follow on screen commands. If you do not have your recovery disk, then you can order them through section of HP computer parts. I hope that this step is all you need. Because if this last resort fails then your computer should be taken for repairs. Maybe just replacing memory chips or the hard drive maybe both.

  Once you fall upwards and re-run. Modify the updater settings to automatically update, but let me pick witch to install. Now manually check you for updater and see if the updates are downloaded. Check only one couple at a time. For some reason when a buch of them settle in once, what is happening. I got lucky when it happpened to me. I could get my computer in safe mode and do a restore from the back. Since I changed my settings it didn't happen.

  Oh if you need send repairs request an estimate may be cheeper to buy new, then tries to fix it. Also check your warranty may still be covered. All HP computers come with one year warranty. Good luck

• trial version will not run before the splash screen

  I hope someone can help please!
  I downloaded the demo of dreamweaver 8 yesterday and I installed and ran fine. Today, that he will not run in front of the start screen. He stands up and asks if I want to buy or wear on the trial--I take trials and the dreamweaver start screen 8 arrives, and then nothing happens. The program does not start. I uninstalled and reinstalled. I rebooted etc - still no go. The other trial, I downloaded (firestarter) works very well yet.
  I am running windows XP media center edition service pack 2.
  Can anyone help please?

  Yes - it ran fine yesterday.
  I think I found the answer. I searched through the posts here & found someone else with the same question a few months ago.
  For anyone who needs to fix - check out this link - read to the bottom where he talks about problems. I ran the updater.2 and it seems to work OK now.
  http://www.Macromedia.com/cfusion/knowledgebase/index.cfm?id=a3f38dcf
  Thanks for the reply though.

• HP Pavilion Elite HPE-555sc desktop PC - will not get past the first screen of the BIOS

  Hello

  Since yesterday my PC, a HP Pavilion Elite HPE-555sc desktop computer, does not start. It freezes at the start screen "HP".

  It only allows me to enter the BIOS and it meets no other entry.

  I thought it might be the motherboard.

  Is anyone know about this problem? Is it already happened?

  It comes to my PC

  My PC was already supposed to be an upgrade, but I would like to know if this can be corrected before I create a new.

  I knew no more probably is not on warranty.

  Thank you.

  Hello

  Which is usually caused by a corrupt BIOS. You can clear the CMOS. Sometimes, but not always, which solves the problem.

  It is of the card mother reference web page.

  Look for the clear instructions of the CMOS. The instructions do not specify this, but it is best to remove the RTC battery before performing the clear procedure of CMOS.

  While the RTC battery is out and the PC unplugged, press and hold the power switch of the PC for about 15 seconds. When you replace the RTC dough the + must be facing upwards.

  Best regards

  ERICO