Muse CC 2015 - slow loading times. How loading deferred?

Similar Questions

• Adobe Media Encoder CC 2015 slow rendering time

  Hello!

  I'm new to video editing in general, but I'm quite intimate with the PC hardware so here.

  Specifications:

  • The stock of 4770K i7, no thermal regulation speed
  • 8 GB 1600 MHz CL9 DDR3 RAM
  • GTX 780 + 170 MHz clock and 110% limit/95 degrees C temp power target
  • Driver 368.39 used
  • 3 x Samsung 840 EVO (no raid)
    • Windows 10 64-bit running off SSD1
      • PE/AE/SOUL installed on this drive
      • Cache / Scratch areas on this drive
      • Images under development
    • SSD 2
      • Games
    • SSD3
      • Games

  I save images using shadowplay NVIDIA from a 75 Hz screen 2560 x 1080. The output file is a 1920 x 1080 60 fps 35Mbps bitrate H.264 MP4 file. (1920 x 810 with black bars).

  I would add that sequences Adobe Premiere elements 14, do any editing that I have to do, and then export it to a file of bitrate MP4 1080 p H.264 12Mbps. The rendering process usually take around 10-12 minutes to 6 minutes video.

  I then add this file to output in Adobe After effects CC 2015, create a composition with drag and create a button, add a few layers of text and export it via Adobe Media Encoder CC 2015 (AE supports native H.264 from what I understand) with the SAME PARAMETERS. But this time, and I estimate that I type here, render times are 40 minutes.

  I ran a few tests and in the course of the first to make the CPU turns to about 80% CPU and the use of 1.8 to 2 GB, as I watch often some youtube in the meantime, so that understandeably not 100%. However, to the course to make AE/SOUL, le CPU CPU remains at about 30% CPU and 1.8 GB ram usage. With the help of the Mercury Playback Engine GPU Acceleration (CUDA) I expect to see more high on my GTX 780 loads, but he is 2-3% of load, so anything.

  Since my render outputs are (to the best of my knowledge) identical between the EP and shall return AE/SOUL, it seems that the use of material by SOUL is in this case. Other posters have suggested that some effects require the previous frame to be returned to pass, but I have not used such effects, are limited to simple text.

  So what's happening? I would appreciate any insight you have on this and I stand ready to provide more information that you need.

  Kind regards

  Corentin Robin wrote:

  First of all, wow. Thank you so much for the depth and quality of your response! If everyone had that kind of mentality, forums would be a very different place...

  No problem! That's why I'm here.

  It is certainly useful that you said your question clearly, with a lot of info and he asked respectfully. Quantity of, "why his does not work u should help me solve this NAOW! 1. 1. ' messages with no information is astounding.

  Corentin Robin wrote:

  I'll try to be to condense my game data on a single disk or both and use the third exclusively for editing. Or I could buy a new one, if the budget allows.

  This would be ideal. In my freelance studio, I have three separate units

  1. OS/software
  2. Footage
  3. Cache (if there are different types of player, it should be faster than you [I know your are currently all the same, it's more for future fans forum])

  It will probably not help much for the rendering speed, but it should help when you're interacting.

  Corentin Robin wrote:

  Before moving on to something else, I want to explain what I'm doing with text. I add text and overlay video, with sometimes a few very basic motion tracking (I can't forget this feature if I need). To the best of my knowledge, PE lets just add a black screen with text over time, like on a Blackboard for example. No text overlays/over-the-video (if it has no meaning...). So respect that, Premiere Pro have these features? If so I could make the switch.

  Certainly, you should stop using the Premiere Elements and start using Premiere Pro. Not only it gives MUCH more flexibility in the work, but you can layer objects of type as much as you want on top of your film.

  He was also transparent enough with AE. By example, if you have a shot that you want to add text, you could cut the part that would have text and simply right-click and choose "replace with After Effects composition. That images will be replaced with a dynamic link to a model of EI that already contains the images that you are handling. You save your AE project and results will be displayed immediately on the first! It's really convenient. If you want to keep this direct link, you can. Or if you are sure you are finished with AE work and wants to read smoothly at first, you can choose to make and replace it. It restores an intermediate file to AE and replaces the model tied first with her. VERY useful feature.

  If you keep track of movement, you probably want to use AE. Although you can make an animation in Premiere Pro, AE is much more suited to do. And if you start to get really fancy, you probably want to do some rotoscoping too.

  Corentin Robin wrote:

  I understand that EI requires much more accurately, and the way you explained it enabled me to understand one of the big question I had with her, which was "why reading in real time is so difficult in AE? You answered that perfectly, cheers!

  There is much more detail in the fact that I could get! Basically, AE must first build a cache, and then he reads. Maybe I should have said that. It is even simpler and shorter!

  Corentin Robin wrote:

  On the issue of compression, I realized that the work of a compressed codec is not ideal. My gross output of Shadowplay file was indeed H.264 because I believe that is the single output file, it allows. I don't think I can do without shadowplay for now because it has unique characteristics which cannot be replaced:

  • For extremely low hardware with Nvidia drivers
  • Ability to retroactively save a video after an interesting "keep-worthy" event, to avoid recording 24/7 in the hope of something interesting

  Those who do not sound like some very useful features. Just make sure that you get quality settings in the codec to achieve a data rate as it allows.

  Corentin Robin wrote:

  Also, to continue on the issue of compression, I got mixed responses regarding this. Some, like you, would say that working with H.264 sacrifices quality and performance, but some say that it is not a problem since the youtube compression will be severely disfigue the file in any case.

  YouTube can recompress, Yes. But if so, it adds ANOTHER layer of compression. That would be an argument even more important to preserve the quality of your side as much as possible.

  Corentin Robin wrote:

  I think my question would be: I would win a much higher quality using Fraps/Dxtory where I can control the settings of the raw images (keeping in mind I lose the comfort of ShadowPlay) even though the compression of Youtube should (I think?) disfigure this film?

  I think that the benefits of ShadowPlay outweigh the concerns that I had about compression in only one step. I still say don't do any other steps in making H.264s again and again that you transmit your project between applications. If you need to make something (you won't have to if you start to use together the Premiere Pro and AE), renders an intermediate codec until you create your deliverable.

  Corentin Robin wrote:

  So, keeping in mind of all of your suggestions and the constraints I have / has chosen to conform to, I should:

  • Have the work files on a separate disk, with areas scratch on this drive or free
  • Replace PE PP to eliminate the need for the AE and have only a single record
  • Since a single rendition is necessary, it is therefore more a real need for an intermediate codec low compression/lossless

  Yes. Although, you can still use AE, you have eliminated the need to make the intermediate files if you use Premiere Pro and AE set.

  In addition the Dynamic Link workflow I mentioned, you can also (once you have finished your editing in Premiere Pro), your Premiere Pro project import into AE. Use import > import Premiere Pro control project. She puts your complete sequence in AE with each cut on its own layer. You really need to do if you started to do really complex with your AE work if.

• Analytics.js DW 2015 still loads Slow When Google Tracking Code in the file

  I thought that this frustrating bug slipped with the release of 2015?

  subhadeep_banerjee last October pointed me they could reproduce the bug I had sent and I assumed that DW would charge quickly, because he did before the 20141 with the analytics.js script in a file.  I've just updated until 2015, a HTML file with, as any would file, the script in the file analytics.js and I waited a good one or two minutes for the file to load.

  I'm running split vertical (live code to the left to the right).  Am I missing something?  Why is it slow load bug always around here?

  It's really unproductive situation.

  Delphine noticed in my previous thread on this bug at MayrBlight on February 26, 2015 the following:

  Hello Mary,.

  The bug because of slow loading with script Google Analytics (3843167) has been fixed in their own country, and will be part of the next version.

  -Christophe

  Any new information would be appreciated.

  Hello

  Sorry to hear that you are still having this problem. I would like to remind that the bug has been fixed in the latest version. (3843167)

  We did some optimization on loading script such as second time to the same script will take time.

  The current page with the script load time, is similar to what you see on Google Chrome as well.

  -Christophe

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• Slow load time

  Any ideas why the Sansa Fuze + takes a long time to load? 5 hours for a full Charge?

  Slow load time means that the usb port is off a small amount of power. If you are using a desktop pc, use a usb port back as the front are usually of low power. If you use a laptop, then plug the laptop power supply before you start to charge the player. For faster loading, use a usb adapter which is rated at 1 amp output (1 000 my). Most usb adapters only put my well of about 500.

• very slow loading

  Hi, I have a very slow loading in my site. Here is the link:

  Print

  Please, any advice on how to can improve load time?

  Thank you

  Ignacio

  I recommend that you only contact QooQee for questions about this page runs. 90% of the code for this page comes from a QooQee widget that you use. Only the outer shell of the page, it's that anything generated by Adobe Muse.

• Microsoft Edge and IE slow loading of pages and unresponsive.

  Original title: Microsoft Edge and IE

  I give up trying to use Bing, Microsoft Edge and IE on my HP laptop.  They are therefore extremely slow loading pages and unresponsive.  I have to type in the search bar repeatedly until I have data entered.  When I try to go up and down the page it has no answer for a long time.  When I perform bing searches I get results that are not useful.  I became totally frustrated, try to use your products.   I don't have these problems using Google and Chrome.  You have an idea why I'm not able to use your products?

  I've turned off sticky keys and filter keys.  I hope that ends my problem.

  Thank you for your help.

  I think my computer was somehow set up for users with disabilities with the settings in Control Panel to sticky keys and keys on filters.  Now, they are disabled.

• This homepage is slow load on your system?

  My homepage seems to be slow loading. I don't know if it is due to one or multiple items on the page. I have two swf files flash out there (photos and navigation) and a calendar of google and a google search bar. One or the combination of all these is the web page of slow loading? I tried in firefox and ie9.

  My goal is also to add a non flash page auto option charges for ipad/mobile. I just need to get the code for this. Thank you!

  http://victorylcms.org/

  In addition, the

  Loads in seconds here.

  Good looking site.

  Clean up your code so that it validates

  http://validator.w3.org/check?URI=http%3A%2f%2Fvictorylcms.org%2f&charset=%28detect+automa automatically % 29 & doctype = Inline & group = 0

  I also re - think this Flash navigation bar. It is novel but 1) how to navigate those without Flash on the site? (2) now it will soon become a chore.

  CSS by navbars created, such as the Server Side Includes is perhaps a better choice.

• Slow loading of Firefox and web pages.

  I have Firefox Version 38.05 on Windows 7 and have refreshed, tried for a new cache.checked HTTP on the Add-ons and always have the same problems
  The statement above about slow loading on my Firefox appears on my desktop, but not on my Windows 7 laptop. I tried all the solutions advocated, and so far nothing works. There is a possibility that some other programs may be in conflict with Firefox? This problem has been ongoing for several months and my patience is wearing thin. Any suggestions, corrections or advice? Thank you

  Created a new profile and had the same problem, although I did not remove the original profile of news: today, I followed through and continued with the rest of the steps as indicated in the notice mentioned previously. Sorry, but it does not solve my problem.

  As a last resort, I uninstalled my antivirus McAfee and lo and here's all my slow misfortunes with my browser have disappeared. I install another antivirus (AVG) and all browsers seem to work as it should!

• My iPad WiFi Air video very slow loading same 3 full bar signal

  My iPad WiFi Air video very slow loading same 3 full bar signal... Any suggestion?

  Should I send to AppleCare or upgrade to the latest version of iOS?

  Yes, update to the latest version, 9.3.1. Also here are a few general suggestions for problems of Wi - Fi. Suggest you start at the top and down, maybe they'll help...

  (1) perform a forced reboot: hold the Home and Sleep/Wake buttons simultaneously for about 15-20 seconds, until the Apple logo appears. Leave the device to reboot.

  (2) resetting the network settings: settings > general > reset > reset network settings. Join the network again.

  (3) reboot router/Modem: unplug power for 2 minutes and reconnect. Update the Firmware on the router (support Web site of the manufacturer for a new FW check). Also try different bands (2.4 GHz and 5 GHz) and different bandwidths (recommended for 2.4 to 20 MHz bandwidth).

  (4) change of Google DNS: settings > Wi - Fi > click the network, delete all the numbers under DNS and enter 8.8.8.8 or otherwise 8.8.4.4

  (5) disable the prioritization of device on the router if this feature is available.

  (6) determine if other wireless network devices work well (other iOS devices, Mac, PC).

  (7) try the device on another network, i.e., neighbors, the public coffee house, etc.

  (8) to restore the device (ask for more details if you wish).

  https://support.Apple.com/en-us/HT201252

  (9) go to the Apple Store for the evaluation of the material.

  Council: https://discussions.apple.com/docs/DOC-9892

• slow loading of search engines

  My search engines, slow very slow loading of period.

  Hello

  It is slower than for search engines or is it slow when internet browsing also. What browser do you use?

  If the internet Explorer try Reseting IE

  Also indicate your system...

• Explorer 8 is really bad compared to 6. It hangs very, very slow loading, if cela an inprovement, then you are in trouble!

  Explorer 8 is really bad compared to 6. It CRASHES constantly, is very slow loading. If cela an inprovement, then you're in trouble. The difficulty of this piece of garbage!

  Hello goodwrench70, welcome.

  Internet Explorer 8, the conditions are correct, will run at normal speed. If the browser is slow or if it crashes, it could be a number of possibilities.

  My suggestion would be to first try and launch IE8 in no add-on mode. This will allow us to see if maybe something 3 rd-party is causing the problem.

  1. click on START
  2. click on "programs".
  3. click on "Accessories".
  4. click on "system tools."
  5. click on 'Internet Explorer 8 (no add-on).

  If the browser still runs slowly or crashes, you can place the machine in a clean boot state.

  1. click on START
  2 type "msconfig" (without the quotes) and press enter
  3. go to the "Startup" tab and uncheck all the entries displayed
  4. click on 'Apply' at the bottom right
  5 restart your computer

  If the browser still runs slowly or crashes, you can try using a different browser to see if the problem is systemic, or just with Internet Explorer. Search "Web Browser" in your search engine. There are a number available there.

  If another browser to work properly, then I suggest to uninstall and reinstall Internet Explorer 8. After the reinstallation, I go to Windows Update and download all the updates that are available for IE8.

  Link reference for the manual uninstall IE8: http://support.microsoft.com/default.aspx/kb/957700

  Hope this helps,

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer laptop is slow loading programs, then I have error message

  Original title: LAPTOP IS SLOW LOADING PROGRAMS, THEN I GET AN ERROR MESSAGE.

  My laptop Windows XP is loading slowly & I get an error message when you click the icons.  Error message: the instruction at 0xffbadd11 referenced memory at 0xffbadd11. The memory could not be "written", click ok to complete the program. I turn off the clean boot windows, and you can click to open the remaining programs quickly, but not in a 'normal' State of windows. What can I do else?

  One of your startup items is badly behave.  You can isolate that through a process of elimination.  Do a clean boot, and then add the items one by one and restart.  When it slows down you found.

  We could be more useful if you gave us your system specs and the specific error message.

• EA4500 - slow loading for Web sites randomly

  Hi guys,.

  I have this problem, try to load sites like http://animeflv.net/ or http://www.reddit.com/r/leagueoflegends/ that they get stuck and start very slow loading. I follow the guide MTU and set it to 1300, but it did not improve it.

  Also, I did reset using the administrator and manually by pressing the red button. Really, I don't know what to do and would like to help.

  Thank you.

  At the end of the day, he fixed himself, ISP problem, I guess. Thanks for the help.

• Die habe ich Gratistestversion von Knoll Light factory von S.redgiant in den Adobe Photoshop CC 2015 Ordner loading. Wie kann man das Tool in Photoshop anwenden?

  Die habe ich Gratistestversion von Knoll Light factory von S.redgiant in den Adobe Photoshop CC 2015 Ordner loading. Wie kann man das Tool in Photoshop anwenden?

  From the product Page, it looks like this product is for Adobe After Effects and Adobe Premier.

  Red giant | Compatibility