Music Bluetooth connection while the execution is HORRIBLE

I've had my Apple Watch - sport watch 42 original - since the date of launch.  I use it all the time.  But from the beginning, I have known a glaring problem and a huge inconvenience: if I try to listen to music via bluetooth to a BT Headset activated during the running/jogging to Apple Watch, transmission is atrocious.  The music signal / autour jumps, there are 2-3 second lag, the signal falls completely, etc..  It does not work perfectly.  And the issue is NOT the BT headset.  The problem occurs on each BT headset, I tried: Dear and low-end models.  These same BT headsets work absolutely perfect w / my Mac and iPhone.  The problem is the watch...

You can imagine how frustrating is: who wants to listen to music from the Apple Watch for BT headphones when he cut and in a few seconds.  So now, I end up using the Apple Watch to track my physical condition, but am forced to lug along my iPhone if I want to listen to music.

Here's something very revealing on the signal low/inaccurate bluetooth from the Apple Watch: if I sit stationary or walking like a robot without arms or by moving the head, streaming works much better.  But this isn't a solution.

How can I fix it?  Is it even fixable or is it just another glitch in the post World Steve Jobs...

My brother-in-law has the same w/his Apple Watch BT problem whenever it tries to use it as a source of music during the race...

Hello

It is a known problem.

It's frustrating, and it should be fixed. I have experienced the same problems myself.

You can report it directly to Apple via Twitter: @AppleSupport

Only one of the thousands of complaints across multiple sites to support > Apple Watch and the Bluetooth connection is terrible during my career.  Anyone else having the same questions?

You can also provide your comments here > http://www.apple.com/feedback/watch.html

Tags: Apple Watch

Similar Questions

  • Bluetooth connection with the Lego Mindstorms NXT robot

    Hello
    I got a license for Bluetooth Stack for Windows by Toshiba.
    I try to connect to the Lego Mindstorms NXT robot: http://mindstorms.lego.com/en-us/default.aspx
    But it does not work.
    The connection seems to be good and NXT and PC to find them, but when I try to connect, the NXT said "the line is busy".
    Is someone can tell me if he can get through this issue?
    Toshiba and Lego have an agreement on the connection of the questions?
    Thank you.

    Hello

    Do you have Toshiba notebook or just use the Toshiba BT stack?

    How to pass through this issue? Should anyone of us spent 250 Euros to buy it and test it at home? Dear oracid it's user forum and you can get help from someone who has the same home equipment and can help you with his experience.

    Agreement between Toshiba and Lego in my opinion it is not problem. Any manufacturer who build material and want to use BT must know how it works. On the market of equipment, there are specific characteristics for each communication technology and what do we do Toshiba is to build and offer the specified material.

    In your case, you must contact the Lego support and ask for help. they, no doubt, tested own stuff with different hardware platforms, the operating systems and software BT so Lego should have enough experience with own products.

  • Problems of BlueTooth connectivity on the 4K 65 "TV

    Hello the Sony team,

    I recently bought a 4K 65 "TV and it is really amazing. However, one nagging question I have and I just could not understand. I tried to connect my BlueTooth devices to the TV, but the TV is simply unable to find ANY BlueTooth device. I repeat ANY device. I tried all possible combinations of menu choices, but can't seem to find my BlueTooth devices. Help, please.

    Corinne

    Corinne,

    The 4K 65 "TV bluetooth functionality is limited to bluetooth mice.

  • I have problems with my bluetooth connection. The computer will not receive files. (But can send)

    It's my computer specs:

    Acer Aspire 4741G
    Genuine Windows 7 with SP1 (full update)
    Trend Micro Internet Security

    Problems:

    Problem:
    (1) on the (Fn + F3) bluetooth connection
    (2) Bluetooth icon at the bottom right.
    (3) right click on bluetooth icon.
    (4) number, 'send a file' or 'receive a file' options.

    Problem 2:
    (1) successfully connected to a Blackberry curve 8900
    (2) I can send files to the handphone.
    (3) when the handphone sends the files to the computer: this message appears:
    (a) connecting...
    (b) sending file...
    (c) and then it stucks at 0%.
    (4) I have the feeling that the blackberry is trying to send the file, detects the computer, but the computer is waiting for a user input to receive.
    (5) maybe the problem is: nothing on the screen shows up to tell me to accept the file.

    Problem 3:
    1) click on the start menu
    (2) search for bluetooth. (Icon)
    3) click the icon.
    (4) nothing happens. O_O

    Can anyone help?

    Thank you

    Kind regards

    Yong Tze Shoong

    Hello

    I suggest you follow the method and check if it helps.

    Disable your anti-virus and check if that helps.

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    If the problem persists, try posting your question in forum Blackberry

    http://supportforums.BlackBerry.com/T5/community-home/CT-p/comm_home

  • Headset Bluetooth connected to the PC, but has stopped working.

    I recently bought a Bluetooth hands-free headset, with the intention to use it for my PC and Playstation 3. It took me a while to find a way to connect it correctly, but I managed to put in place and both the speaker and the microphone worked perfectly. However, when I moved my Bluetooth adapter to another USB port and reconnected my headphones, the speaker has stopped working. It was not broken, because he was still working on my PS3, but it did not play all the sounds from my computer. I would go to control panel > sound and I would be with the right button of the headset and click 'test', it would have displayed on my screen as if he were playing, but no sound came through the speaker. The microphone was still working, and I don't really use the speaker, so I didn't really like. However, I recently connected an controller to my PC as a game controller, and I installed the wrong drivers while my card is always connected. I uninstalled the drivers and later installed good, Bluetooth had stopped working on my PC, so I rebooted, plugged the adapter in, active Bluetooth etc, and I was able to reconnect my helmet. However, now the microphone has stopped working as well. I tried to use "Microsoft Fix It", and when I would try to help out the speaker or microphone, he told me to turn on my camera, then it is already enabled, and I wouldn't be able to do anything.

    Hi sexualharrasmentpanda,

    Please see the post below with a similar problem and fix possible:

    http://social.answers.Microsoft.com/forums/en-us/w7hardware/thread/2fdc6964-78f6-468F-98c2-a1a9c7ffadce

    I hope this helps!

    Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • (Help) I need simple code for Bluetooth connection in the Eclipse IDE

    I need simple code for Bluetooth in the Eclipse IDE connection because I do not know tutorial http://docs.blackberry.com/en/developers/deliverables/11938/Use_a_Bluetooth_serial_port_connection_5...

    Please help me, thanks for all

    Use the tutorial for 5 SDK (or lower), each SDK has its own set of samples.

  • Win10 Desktop shows never "connected" while the user is logged

    Hello

    We have a bunch of floating swimming pools 10 windows and they work fine. We also 1 pool standing/manual with a single machine virtual of Win10 inside (came from the same master-image).

    Strange thing is, that this one specific Windows 10 VM still shows as 'available' in view 6.2.0 admin.

    The user who owns that VM can connect fine with his client to view. But it can connect * once *.

    While it connects, works. Disconnects, and then tries to reconnect, but customer barks that there is no available jobs. Meanwhile, the virtual machine appear as 'available' in admin view. In fact, it never shows anything else.

    Only when the virtual machine is turned off, it will say "Agent unreachable" as it should. But apart from that, it shows as 'available', regardless of the actual state.

    The administrator or the user must restart the virtual computer to be able to connect again from each second attempt on and go, causing the error "no available offices.

    At the same time, the user can resume the session still running with RDP (bypassing effectively view) as often as he wants. The problem lies only in the view.

    This virtual machine is running on the same subnet that brokers connection so firewall issues are out of the question. And brokers see the VM when it starts and change "agent unreachable" to "available". So, there is communication between the brokers and agent of this virtual machine (all v6.2.0).)

    Any idea?  This behavior began a few months ago. Previously, it worked fine. The virtual machine is highly personalized and can not be put away and rebuild. I have re-installed the view Agent and the VMtools and done all the obvious troubleshooting stuff. I'm puzzled.

    Can you double check that wssm starts correctly inside the user's session?

    Confirming that the userinit string is correctly configured (1028975) | VMware KB

  • Version 20.01 is "Unable to connect" while the previous Version 19.02 works great!

    My work computer which runs Windows XP Pro with Service pack 3 and beyond has been upgrade FF worm. 20.01 this afternoon and is "unable to connect". It worked very well on the version previous minutes before it has been updated! Nothing has changed in my network connections and my firewall settings! I'm writing this on a Windows 7 computer that is currently running FF worm. 20.02 that works well! I have another Windows XP Pro computer that is currently running FF Ver, 19.02 and there is a "Software Update" window on the screen asking me to update this computer to 20.01 worm. FF. I clicked on "Ask later" in fear that it will have the same problem "unable to connect"! Help!

    It is possible that your security (firewall, antivirus) software blocks or limit Firefox or the process of plugin-container without you inform, possibly after the detection of changes (update) for the Firefox program.

    Delete all rules for Firefox and the plugin-container in the permissions list in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container and the update process.

    See:

  • WiFi doesn't connect while the phone is in standby

    Everyone knows the mobile data taking priority over wifi in some compact Z5 scenarios?

    To reproduce:

    1. Phone is fully charged.  None of the energy savings options are enabled.  Dungeon of wifi on during sleep is enabled.
    2. Phone is somewhere far away from wifi to use with mobile data.
    3. Phone becomes in the scope of a known any wifi device in not in use.
    4. After a period of time, the phone is used.
    5. Mobile data are still in use and wifi turned on only at the point of the screen truns.

    This happens at home and my office.

    Issue edited by Rickard

    In the last update, 32.2.A.0.224, we have enabled analysis for WiFi so that your phone is (re) branch after being out of reach even when it is dormant in the background. It could take up to 5 minutes or so before it connects when to sleep well.

    If your WiFi is still not working properly after this update, if possible, try your phone with an another router/access point to make sure that this is not caused by the router/access point.

  • music mute app while the display turns off.

    There is a musical project of my hand.

    but the app still mute when the screen will Dim (the playbook in standby mode).

    How to fix coding or config?

    If the screen should be forced to stay in your application (unlikely) then you want to investigate NativeApplication.nativeApplication.systemIdleMode.

    If weather is nice, the screen darkens and the PlayBook goes into sleep mode, but you want your application to continue to play the same music in this case, you want to study QNXSystem.system.inactivePowerMode.

    I posted awhile back with a summary of this feature , and a link to the Knowledge Base article on this subject.

  • I can't the music playing in my car when I have iPod touch connected via Bluetooth. I get message says: CONNECT to THE WI FI TO PLAY music. Why not play via Bluetooth only?

    Hello..

    I'm playing my iPod touch in my car through Bluetooth. The audio system in my car recognizes the iPod via Bluetooth. but, I can't seem to play the music. I get a message on the iPod that reads to CONNECT to WI - FI TO PLAY MUSIC. There is of course no WIFI signal in my car, just Bluetooth. Why can't the iPod to play through my audio system via the Bluetooth connection? Why he keep insisting that I need to connect to the wi FI? How to play via a Bluetooth connection? The Bluetooth is in the car & on the iPod. It is synchronized to the top.

    Thank you in advance for help.

    Hi, Mishkapatches.

    Please visit Apple support communities.

    It sounds like you may be a subscriber of Apple music and media has not been made available to listen to offline.  I suggest you take a look at the article below.  This will guide you through the process of downloading music music Apple directly on the device so that you can listen to music when not connected to the internet.

    Add music catalog to Apple's music to your library on your iPhone, iPad, iPod touch, Mac or PC

    See you soon

  • "The account specified for this service is different from the account specified for other services running in the same process" while trying to connect to the internet.

    Original title: the account specified for this service is different from the account specified for other services running in the same process

    while trying to connect to internet, I get the message "connection status: unknown the account specified for this service is different from the account specified for other services running in the same process" that you start happens out of the blue. When I run the diagnostic and repair tool it says that Windows cannot resolve the problem, contact admin or your ISP. I know that my internet service works very well. I am currently on an e-machine running Windows Vista Edition Home Premium and it connects without problems. My problem is that my most recent top of office (gateway also on Windows Vista Home Premium) receives connection problems. IM connected to the internet (DSL) with the ethernet cable from the Yukon. All the lights are green on the wireless gateway, so I know that the service is very good. Strange thing I noticed, when I go to network status and share and view Gateway desktop computer shows the "Yukon Ethernet controller" as the connection while the e-machine device says Im using "Intel (R) PRO/100VE Network Connection" Im using the same cable (Yukon) and put in place for both computers, so I was wondering what that was all too. Any help is appreciated.

    Hello

    Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not connect to Internet.

    1. have there been recent changes to the computer before the show?

    2. the problem occurs in safe mode with networking?

    Please go ahead and follow the steps mentioned and later a update on the State of the question.

    Method 1: Wi - Fi and in Windows network connection issues:

    http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=Tab03

    Additional information:

    The problems of Internet connection:
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

    Please follow these recommended steps and post if you still experience the problem.

  • Unable to connect to the Wi - Fi "Verizon MiFi" network

    Using the Windows XP w/SP3 Media Center Edition operating system. Recently got a Verizon Wireless MiFi wireless hotspot. The computer will connect while the device is plugged into the USB port but not connect wireless. I get the following error message: unable to connect to the network Wi - Fi "Verizon MiFi. To make another attempt, press the retry button. If you want to change the permissions for "Verizon MiFi", press the button change the credentials.

    I tried the Microsoft #871122 articles, 313242, 815485, 826942, 884787 and 915727.

    Any ideas? I'm at the end of my rope.

    Moreover, my laptop that runs Vista operating system connect wireless.

    (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

    (2) START, CONNECT, WIRELESS INTERNET CONNECTION

    --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

    --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

    3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

  • Bluetooth connection is no longer

    Hello world


    I'm currently under that Vista Ultimate completely up-to-date (03/15/10) on my Acer 5680. I've been running my mouse Mogo (BT) for months now without any problems. But for some reason my bluetooth is now unable to find the devices either.

    All my devices appear on other computers BT active in the House, but just not mine?

    I tried a system restore, uninstall and reinstall the drivers of BT, the file Microsoft Fix - It and everything else I read on here and elsewhere.

    The mouse is always displayed under the mouse-> Bluetooth, but does not connect.

    Any help would be greatly appreciated.

    Thank you

    Matt

    Hello

    Hardware devices not detected or does not work - a Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    The problems with Bluetooth devices
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

    Set up a Bluetooth compatible device
    http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

    The problems with Bluetooth devices
    http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

    How to set up a Bluetooth connection
    http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

    The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not work as expected
    When you click the item
    http://support.Microsoft.com/kb/960531/en-us

    If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

    BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
    devices around you. For each detected Bluetooth device, it displays the following information:
    The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
    Last detection time and more. BluetoothView can also warn when a new Bluetooth device
    is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE http://www.nirsoft.net/utils/bluetooth_viewer.html

    BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
    the standard output. For each Bluetooth device, the following information is displayed: MAC
    Address, name, Major Device Type, minor device Type and possibly the name of the company of
    the device (if the external file of MAC addresses - oui.txt is provided) - FREE
    http://www.NirSoft.NET/utils/bluetoothcl.html

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • How can I disconnect from the internet but to maintain my connection to the local network in Windows 7?

    I need to disconnect internet to my PC Windows 7 while maintaining my LAN network. Can anyone help?

    Hello

    If you want to disconnect Internet on the Windows 7 computer, then you can follow the steps mentioned below. These steps would help you to disconnect from the wired connection, while the connection is still active.

    (a) click Start.

    (b) type network and sharing Center in the start search bar and press ENTER.

    (c) in the left pane, click on change adapter settings

    (d) it would be to open a window with the connection to the wired LAN.

    (e) now, right click on the wired LAN connection icon and select Disable. (Provide the password if necessary).

    (f) it would disconnect the computer from Windows 7 to connect to the local network.

Maybe you are looking for

  • iOS 10 news

    I really dislike the new iOS news 10/look ow I have to scroll forever to access articles on the company or technology I have to scroll a ton of sections, I want not - a whole section on football? How can I get rid of these? T there is no communityfor

  • The iMac has a digital input?

    Hello I searched for centuries for the answer to what I thought was a simple question - the iMac has one digital input (optical or other)? I know that the headphone port doubles as an analog audio to as well as an optical digital output, but this por

  • TFT-panel in the Satellite Z830

    What type of TFT screen not the Z830 series has? In the specs it says proudly there an ultra super LED backlit HD regardless, but it does not say what type of Panel. I'm afraid it's a slab TN, otherwise it would send a clear message. Still, I wish th

  • I don't get any audio except DIVX streaming video

    It used to work fine, but for over a period of 8 months now, I have no sound with streaming videos. I have no problem playing the videos that I downloaded. I sometimes audio streaming from a DIVX as MegaVideo site. This has happened Each time Firefox

  • Someone is using my Apple ID for purchased an ITunes song? What can I do?

    someone is using my apple id and bought a song on iTunes. What can I do?