Music CD and DVD do not work on satellite notebook

Similar Questions

• Satellite L670 - CDs and DVDs do not work smoothly

  Hello!

  I recently bought a Satellite L670 and there is a problem with the DVD player: CDs and DVDs do not work smoothly, there is a lot of audio and video clippings.
  I uninstalled the driver for DVD drive and reboot the laptop, but it has not solved the problem.

  Could someone help me with this?

  Greetings from France!

  With cups, you mean peak and its gel for a second, right?

• WIFI and BT do not work on Satellite C850-F12S

  Hello
  My friend has a portable Satellite C850-F12S who wouldn't start so he asked me to fix it.
  I used a Windows 7 disc retail and product key as his cell phone to reinstall windows.

  I downloaded the Atheros wireless, intel drivers and realtek, but none of them want to install. I have the seam of Ant to get the wifi or bluetooth, too much work.

  When I enter the serial number in this site it is said that it is bluetooth and wifi but the drivers wont install and when I go to "network and sharing", "change adapter settings" it only shows the ethernet adapter nothing else. I tried pressing fn + f12 and the wireless led turns amber, but still nothing.

  I ran out of ideas. Could someone help me fix it please?
  Thanks in advance

  I can't read this specification for laptop (too small), but so deep is the product key, which means that this laptop model was offered with the original version of Windows preinstalled.
  Before that you're wasting your time trying to fix something I recommend you install the original version of OS which includes all necessary drivers, tools and utilities.

  I just hope that your friend have created recovery (DVD or USB) media because after your Windows disk recovery facility installation HARD does not work.

  Ask your friend if there a recovery media and use it for the installation of the OS.

• Switch signals and Wireless does not work on Satellite A660

  I have laptop Satellite A660 17 M AND I am facing a PROBLEM THAT IS THE WIRELESS DO SWITCH NOT RUN AND did not SWITCH THE WIRELESS ADAPTER ON or OFF
  AND ALSO ON THE TOP OF THE KEYBOARD FUNCTION BUTTONS DOES NOT WORK

  AFAIK, the utility Vap and flashcard support are responsible for these functions. You can try to download and install them

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Note, first you must install the utility of vap and restart the support belt utility and Visual support cards, then

• Keyboard and touchpad do not work on Satellite C870-13F

  I have a computer satellite C870-13th since August.

  Yesterday for no apparent reason, my touchpad has stopped working. (no, I didn't turn off)
  Not really bothered by it, I continued working on my computer for several hours.
  Find it me so that he might be a little bug, so I decided to restart my computer.

  When we turn back, not only my touchpad does not work, now nothing on my keyboard responded, not a single touch. I've updated the drivers, bios, done a virus scan, restored my computer for a few days before, nothing is.

  The strange thing is that the keyboard is always when I press F1 or F8, 0, enter, and arrow keys to get into the menus before windows starts.

  Help them, I used the toshiba recovery to restore the computer to factory settings.
  Despite all this, keyboard and touchpad are still pending.
  I don't really understand, because it works at startup may not be real materialistic damage!

  Now, I'm getting frustrated cause I have more solutions and tapping the screen with the keyboard is really slow! = p

  Any help?

  Hello

  I think that it s a bad material work because you have already tried the system recovery and the keyboard does not work even if you use the factory settings.

  But it would be interesting to know if the USB external keyboard would serve. You can test this? In my opinion if the external keyboard would work properly, then it would mean that your keyboard is faulty and must be replaced.
  I m wondering if the fault of the touchpad is related to failure of internal keyboard.

  However, I think that the guarantee must still be valid if you bought this unit in August. Then get in touch with service and guys should fix it for free!

• Keyboard and Touchpad does not work on Satellite L

  It's the second time this has happened to me
  However the last time a system restore solved the problem, this time restore system did not work.

  I can use my keyboard at startup and in safe mode, but that's all.
  I am currently using a USB keyboard and a mouse.

  I tried almost all the suggestions with no joy. Help, please.

  Hello

  There are not many options that could solve this problem.
  It can be a hardware software or related issue.

  You can use the internal keyboard in the BIOS?
  Select this check box.
  If this is not possible, I guess that the hardware is defective.

  Also I recommend that you test the keyboard and the touchpad using factory settings.
  Grab the laptop and check if the keyboard would serve. Otherwise you will need a help of a technician for laptop to replace the keyboard and the touchpad

• Update Windows SP3 and DVD will not work.

  I show a history of update of. NETFramwork 3.5 and Service packs 3 dating back to May 2010.  At the same time, I lost the use of the DVD +-RW.  While I got the update automatic running, even when I try a download of express update, the system always says that I need. NETFramwork 3.5 SP 1, error code 0 x 643.  I tried all the ways suggested to get the update, but it fails every time.  The "Add/Remove" says they are listed, but why can't pass the download system say I need the. NETFramework 3.5.  I had been doing my backup on the DVD but were not that the device appears even now on the screen.  I don't know what else to do.

  [I needed a security related update to qualify you for a free Microsoft support.]

  See the section "How to get help", for example, http://support.microsoft.com/kb/979909

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start a Windows Update support incident email request for free
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• CD/DVD does not work in Satellite A200

  I own an A200 laptop series. At the present time it is not read any CD/DVD. While checking the Device Manager, it shows to WHAT CD/DVD is either corrupted or missing code 39.

  I uninstalled the driver. Now what should I do to reinstall and my laptop to read CD/DVD?

  Try it please with http://support.microsoft.com/kb/314060/en-us

  Good bye

• The CD/DVD does not work with El Capitan 10.11.5 on Macbook Pro

  Hello everyone, I spent the time to research on the here and the other site on why the CD/DVD does not work with El Capitan 10.11.5 on MacBook Pro mid 2009. This discussion forum has said that he will not work with the El Capitan software. Any idea or suggestion? Back to Marverick or Yosemite? I tried to use SMC reset, restart, recovery and still the same issue.

  I thank in advance.

  ~ Mike

  I have my doubts that the (10.11.5) software is the problem.  Are you sure that the DVD player is simply not defective?  Have you tried to clean the lens?  What is the State of the disc?

  Your best option may be a date at a bar in engineering of the Apple store for a FREE evaluation.

  Ciao.

• Satellite C855 - 17M - CD/DVD does not work

  Hello

  I have a Satellite C855 - 17M. nd that the cd/dvd is not working.
  I tried upper and lower in regedit but the file is missing, and said it also the format is not supported.
  Any 1 help me pls pls.

  Thank you very much

  Hello

  What exactly do you mean by not working do not?
  You have problems reading the disc or write data on the disks?

  Which discs have you tried and you have a few problems with the disks?

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.

• The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook

  The device Optiarc DVD RW not working not not on HP Pavilion dv9000 notebook... When I insert a dvd/cd he made just loads off noise and won't load anything. When I try to go into MyComputer to manually load theres nothing showing there just my local disk... one of my friends said that it mite Miss port or driver... could someone help please

  Thank you

  ·                        http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• DVD-CD not work - the SOLUTION!

  I discovered that Microsoft forgot to put in the software for the readers. Go to MicrosoftWindows.com/updatedrivers and look for the "Microsoft Fix It", link and it will download the drivers on your computer and DVD discs will work! Good luck! Don't pay for someone to do it for you, its simple!

  To fix readers, go to http://www.microsoftwindows.com , click on support and help from microsoft.   Then scroll auto supported, Microsoft Fix it Support Center , and then scroll down to "Windows", then all the way down to, your CD drive or DVD drive is missing or is not recognized by Windows or other programs .   Click on this link and click on "difficulty it for me ', and it is where you can fix it yourself. It is easy. Nice day!

• USB and DVD does not

  (1) when I'm injection hard-wear PC cannot access mass storage... Please suggest me.
  (2) even DVD does not work on my PC. It shows that research on vacuum... (windows 7 ultimate 64 bit OS ms 2009 system)

  Hello Bharat,

  (1) what mass storage device you are trying to use?

  (2) you are able to play any other DVD in the computer?

  (3) have you tried to connect the USB key to another computer or another port?

  In the meantime, please follow the Microsoft Fixit and see if that helps.

  Diagnose and automatically fix the Windows USB problems

  http://support.Microsoft.com/mats/Windows_USB_diagnostics

  Also refer to:

  Tips for solving problems of USB devices

  () Also applies to Windows 7( )

  http://Windows.Microsoft.com/en-in/Windows-Vista/tips-for-solving-problems-with-USB-devices

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• I've lost the ability to copy files on my CD player. When I drag and drop, the only authorized action is 'move' and it does not work.

  I've lost the ability to copy files on my CD player.  When I drag and drop, the only authorized action is 'move' and it does not work.   I tried press and hold the CTRL key while dragging, and when I do that all the other disks show "copy" as the default action, but when I hover over the action CD player available only changes to 'pass '.   I ran the Microsoft Troubleshooting tool for CD/DVD players and he said that the media were not writable, but there is a blank CD in the drive.  Any ideas on how to solve this problem?

  Thanks, but the cd/dvd drive works well - I can burn a cd with windows media player for example.  the problem is that I can't copy files to it.   I can play CDs (haven't checked the DVD).  I can not do and could do before, is doing drag and drop files on it.  The only authorized action is "move".   This happens even when I click CTRL + do drag.   I can copy it to any other player, but the CD player, and when I hover over the "exemplary" drive CD goes to 'move '.

  have you tried using a different suite of cd/dvd burning?

  Imageburn is free and easy to use: http://download.imgburn.com/SetupImgBurn_2.5.7.0.exe

  There may be something to play with your access keys if you have a (ie., wirekeys)