MUTE button Red

Similar Questions

• Sound not coming from speakers, mute button Red

  Mute the button on my hp pavilion laptop dv4 1551dx is permanently red and the sound will not come out of my speakers. When I touch, the screen will indicate that it has been reactivated, but the speakers do not always work. However, I am able to hear the sound in my headphones. I tried run tests and download a new BIOS, still have not found a solution. Also a message keeps popping up when I restart my computer that says "the compatibility issues with HP buttons" or something like that. I have download the bad BIOS? I would like some tips on how to get this problem fixed as soon as POSSIBLE! Let me know if you need more information to help, as I'm not very experienced with computers. Thank you!

  Uninstall the current driver for IDT audio.

  Resources:
  Uninstall software in Windows 7

  Uninstall or change a program in Windows 7

  Install the latest IDT audio driver for your model here.

  Restart the system.

  Now install HP Quick Launch Buttons here (ver 6.50.13.1 for 32/64-bit Win7).

  Restart again and check the result.

• Pavilion dv6-1030US mute stays red button

  Hey, help please.  Have windows vista (not sure if there are 64) or just vista.  MUTE button red all the time. Volume bar works most of the time, well that some time not.  I flashed the bios.  Don't know where to go from here.  old FRT of 65 year, not too savi on pc please talk to me as such.  Thank you in advance for any help you can give me.

  Hello

  You are welcome

  Try to use Recovery Manager to reinstall the IDT Audio driver - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows Vista

  After reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP Pavilion dv6-1334us Entertainment Notebook - mute button color in the key board is always Red

  The color of button mute Audio always on red although the sound turns power on and off when you press.  When the switch is turned off indicator turns white for a second.  Please suggest me the solution so that the mute button becomes red and white on the operation.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  IDT Audio Driver - Windows 7.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When it finished, restart the computer again and check if the 'secret' led now changes colors correctly.

  Kind regards

  DP - K

• HP Pavilion dv6 1335 TX - Mute button is red all the time and not of sound through computer speakers.

  HP Pavilion dv6 1335 TX - Notebook PC (New Zealand)

  MUTE button is red all the time and not of sound through computer speakers. # LED light is 5 according to the guidelines of the manual for the identification of your component externally.

  Processor Intel Core 2 Duo T6600 CPU @ 2.20 GHz, 2200 Mhz, 2 Lossnay, 2 logical processors

  Name of the OS Microsoft Windows 8 Preview version

  Version 6.2.8400 Build 8400

  System Type X 86-based PC

  All drivers works normally and have been checked for updates that were not necessary.

  Turn help would be appreciated

  Hello

  Mute key functionality is provided by IDT Audio software, so the problem may be that Windows 8 has installed a reference driver that does not contain.  Often, the Windows 7 version works Ok, so I would try downloading and installing the following driver IDT.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48830.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Quick Launch button MUTE constantly Red

  I took delivery of a HDX16 - 1030EA last week. The MUTE button works but is not white, he is constantly red, even when his cheek. I uninstalled the software to launch quick & even reinstalled. No difference.

  I am running Vista Home premium 64 & used 64 drivers.

  Any help appreciated. not a big thing, just iratating.

  Thank you.

  Please don't mind try to uninstall the audio driver and then go to your recovery Manager (click Start > in the search box > type: Recovery > look, click on Recovery Manager > click Advanced option > relocation of hardware driver > next > next > choose the audio driver on the list > next > wait that it finished installing the driver > click Finish > computer requires a restart > prove the functionality > if she don't) , try to download an audio driver updated to hp.com then update the bios to a later version. Good luck!

• not his (red mute button) after IDT installing on my laptop dv4-1435dx

  This is now my edges burn...

  I've had this laptop almost a year and since installing windows7, there is no sound coming out of this laptop.

  wrong to describe the problem:

  After you install the update for windows7 HP it installed the IDT audio codec, and after a reboot, the mute button became red and will not pass.

  After making back the IDT pilot button turned white, stayed like that and it has sound... but it does not turn red (although the audio sign on the trey turns off Cup-no)

  I updated my BIOS, installed all the drivers of quick launch button, the IDT pilot on the site of HP compatible to my laptop.

  can you help me please?

  OS: windows7 64 bit

  Hello

  Download, but not install it:
  IDT sound sp48668

  Disconnect from the Internet.
  Uninstalling your system IDT audio drivers.

  Resources:
  Uninstall software in Windows 7
  Uninstall or change a program in Windows 7

  Restart your system:
  At startup, press ' F8 ' and choose ' safe mode '.

  Reach:

  Panel-> Manager devices-> Audio, video and game controllers

  and find there sound card IDT. Click with the right button of your mouse and choose uninstall the driver.
  Reboot your system, and this time it starts normally.

  Install the audio driver that you have already downloaded.

• the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  the camera shutter sound cannot be silent with the mute button on my phone i 6 s

  Depending on where you purchased your phone, this is not possible, because of legislation in these countries that regulate this feature.

  In all other cases, try to force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again. You won't lose data, but it can cure some problems after installing new software or applications.

  In the case where this does not work, restore the phone:

  Use iTunes to restore your device iOS to factory settings

• MUTE button stuck

  Hello I have a hp pavilion dv7 and the mute button was stuck for a while, I went to the site to download new drivers and for maybe 30 minutes the mute button was off however, he returned to be stuck all of a sudden. Help please . My flag is the dv7 - 1245ca and runs on windows 7 64 bit

  Hello

  It's curious, why the program the Audio driver installation failed, but try the following to see if it is more successful.

  Windows Control Panel, open Device Manager and open sound, video and game controllers.  Right-click on the IDT audio device and select Properties.  Click the driver tab and then click on set to update driver.  Select this option to check on the internet and see if another driver is found and installed.  If this is the case, restart, and then check the good operation of the Mute button.

  Kind regards

  DP - K

• Satellite P300-1gn starts up it free or by touching the Mute button

  My satellite P300 1gn starts that it self.
  It starts also toutching the Mute button or button CD (they are part of the extra of the enlightened next buttons set the power button. Is it possible to disable these keys additional lluminated?

  I wonder that it is a hardware issue or a result of a virus?

  Help, please.

  Hey Buddy,

  It starts by itself from the standby or hibernation mode? Or when you turn the computer off completely?

  Have you tried to load the default settings in the BIOS?

  The laptop must usually start only when you press the power button. If it is an update of the BIOS might be useful in this case

• Qosmio X 870-14 M - mute button FN does not work

  Hello

  I have problem with mute button only, all other works very well. When I push button nothing happens. Funny is that when I close Wifi key first, the key works put on mute for a short time, but that the judgment.

  Please you have any idea how I can solve this problem.

  Hello

  Do you mean the Fn + F11 key combination?
  AFAIK the FN + F11 mutes the sound from the laptop

  Fn + F12 activates and disables the internal Wi - Fi and a Bluetooth module.

  Do you need to press the FN button to use the function key?
  You can configure the key operating mode by selecting the mode of special function or Standard F1 - F12. This would use the function keys with or without the extra FN key-press.

  I also recommend the application of the function of Toshiba key.
  You can find it in Desktop-> Desktop Assistant (in the task bar)-> utility tools & -> Toshiba function key

• HP Pavilion 15-P017TU: my Mute button light won't

  After updating my laptop for windows 10 my orange color LED light on the F6 key used as mute button has stopped working.

  It of a minor problem but would be happy if can receive a solution...

  Hello

  Line mute functionality depends on the software, so try to reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  When this has completed, restart the laptop.

  Kind regards

  DP - K

• Satellite P300-1EJ - Mute button does not work

  Hello world

  Press mute on the media panel is no longer functional.
  I have the Satellite P300 1EJ.

  Help, please

  Hello!

  Is - it only the mute button not working or other buttons too?

  Normally you need for these buttons the Toshiba value added package if you are using Vista. I think you should try to reinstall. So to remove the older version, reboot the laptop and install the most recent version that you can download from the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good luck!

  Good bye

• HP Elitebook 8440p - Mute button works but blocked on orange.

  Recently bought a refurb HP Elitebook 8440p and noticed that although the mute button works the key just above the keyboard is always orange. Is it possible for me to correct it so that it shows orange only when on mute and green when not cut?

  Hello

  Try the following.

  Download IDT Audio Installer found on the link below and save it in your downloads folder.

  IDT HD Audio Installer.

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the driver to Chipset found on the following link.

  Driver Chipset.

  When thie Chipset resettlement has completed, reboot the laptop and let Windows load completely-, it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, restart the laptop again before checking the function of the button mute conduit.

  Kind regards

  DP - K

• HP pavilion beats mute but mute button is not on

  My laptop works fine, except for the fact that I can't hear any sound with everything I do if it means that I am on youtube, iTunes, etc.  However, my button mute is definitely not on, and I don't know if there is another way to her other than the regular mute button of inhibition. Help!

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57966.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once this done, do a right-click the speaker icon in the taskbar and select playback devices.  'Speakers and headphones' left click once to highlight, and then click the Set Default button - check if you now audio.

  Kind regards

  DP - K