MUTE led & mouse

Similar Questions

• Product name: HP ENVY 15 x 360: Mute LED does not work

  My mute led (F6) no longer works. The mute real works but not the LED is orange. I have read other forums about this, but they were out of date and do not fix my problem. Help, please.

  Hello
  
  Try the following.
  
  Download Realtek HD Audio Installer on the link below and save it in your downloads folder.
  
  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66250.exe
  
  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers. Right click on the Realtek audio device and select uninstall - also, you should get a command prompt to delete the current driver, check the box to enable this and then proceed to uninstall.
  
  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp66001-66500/sp66227.exe

  After reinstalling Chipset, stop the laptop - for this by holding down the left SHIFT key you click Shutdown to temporarily prevent a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu. Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER. Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When windows has reloaded, open your download folder, right click on the installer of Realtek and select "Run as Administrator" to launch the installation. When it finished, restart the computer before checking if the 'secret' led works now.

  Kind regards

  DP - K

• HP ENVY Sleekbook 6-1126sa - Mute LED does not

  Name of the product and operating system

  • HP ENVY Sleekbook has 6-1126
  • Windows 8.1

  Description of the problem

  • LED MUTE does not work/display
  • Nothing has changed I'm aware

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp58501-59000/sp58502.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, close the laptop by holding down the SHIFT key when you click Shutdown to stop temporarily a boot hybrid.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• Pavilion 15 p009st: HP Pavilion 15 laptop computer p009st button mute LED does not

  Help, please!

  I've had this laptop for two years, and it's already happened; I don't remember how I solved it then. The small orange LED on the button mute (also f6) don't would light up. This happened after I cleaned the computer using CCleaner. I guess I deleted something I shouldn't. Does anyone have an idea how to solve this problem? Thank you.

  Hello

  Try the following.

  Download the Realtek Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72139.exe

  When finished, press and hold the Windows key and press R.

  In the run window, type devmgmt.msc and press ENTER.

  In the Device Manager window, expand sound, video and game controllers, right click on the Realtek device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you are finished, download and reinstall the Chipset driver at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72043.exe

  When the reinstallation of Chipset is finished, stop the laptop.

  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f9 to load the default values (sometimes it is f5, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  When Windows has reloaded, open your download folder, right-click on the setup of Realtek Audio and select "Run as Administrator" to launch the installation.  When this has completed, restart the laptop.

  Kind regards

  DP - K

• EliteBook 8440p: button Mute LED Touch doesn't change color.

  My laptop has a Ribbon bar buttons touch LED above the function keys. In this document, the 3rd button on the right is the button mute volume. When they are affected (as expected) he cut the sound or vice versa. But the problem is it stopped to change the color of Cyan to Orange when cut (and vice versa). Although earlier he did change color as expected.

  I even tried the taskbar sound mute, but even then it does not change color. The LEDhardware's alright (no fault of material here). I can tell because when I turn on my laptop, this is the case, as expected, go orange.

  Hello

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp46501-47000/sp46721.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When you're done, shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  Once done, restart the laptop.

  Kind regards

  DP - K

• HP LED mouse wheel to scroll - how to fix?

  I downloaded drivers but the PC still says I have the latest and best. Spent several days trying to solve this problem, but no luck. Help, please?

  Running W7 x 64

  You can find PS/2 mice up markets chips and mom/pop style computer stores.   New cost only $6.50 + ship. or less

• Thunderbird installed 38 & now the PC freezes. No response from mouse & KB. What should do? How knowledge is there a w/o e-mail response?

  As explained in the summary...

  Version of Thunderbird installed 38 last night. This morning I have urgent questions on the email.

  I open Thunderbird and before it finishes downloading the mails from the server, and sometimes even before the end of the authentication password for the accounts, if freezes. I restarted three times with zero improvement. Mouse and KB are both unresponsive while the LED mouse works when the mouse moves and indicators CAPS etc meet key activities respective, so devices are working on their own, but Mozilla Thunderbird blocks the communication between them and the PC.

  Now, I don't have access to email and no way to know when there is an answer to this! Nice!

  What exactly is necessary to make Thunderbird work? And how can I find out about it without any email?

  I use Windows 7 on a PC. I use Firefox and Open Office, no other product from Ms.

  PS: I have an account already, but you do not provide a way to recover passwords, so that's my account 02!

  Try turning off hardware acceleration.
  Tools (Alt - T) - Options - Advanced - general tab
  Uncheck the "use hardware acceleration".

  What is your anti-virus software?

  THREE calls to your London Office

  Mozilla does not support. This forum is the official place to support Thunderbird. Most of the people here are volunteers devoting their time to help other users.

• M9X68AV - HP ENVY 17 t-n100: My Mute button light Don't Come On... but Mute function work

  I see other people are having this same problem.  Me you can point you in the right direction to solve this problem.

  I had a problem with "display driver stopped responding and has recovered.  Display driver Intel HD Graphics Drivers for Windows 8 (R) stopped responding and has successfully recovered. "I contacted the HP Support and they ran a BIOS update and removed my NVIDIA driver and install the driver of Intel HD.  The next morning, the mute led will not come.

  If you can help, I will HERE it.

  Thank you

  Hello

  Driving down features are provided by the audio software.  Try to reinstall the Realtek HD Audio software at the following link.

  http://ftp.HP.com/pub/SoftPaq/sp72001-72500/sp72117.exe

  When reinstalling, restart the laptop.

  Kind regards

  DP - K

• HP envy 17 J160NR: hp envy 17 J160NR mute button does not turn on

  I have a 17-inch hp envy laptop my work button mute it just used to light up orange when cut more I've had this laptop for a year. It was working fine yesterday but when I went to bed last night hp was an update of copying files and other stuff for this, but when I woke up this morning the button mute wouldn't lite upward when you press. and on my laptop the mute button is f6 and the keyboard is backlit. can anyone please help me out and tell me how to solve this problem? It's really annoying, I need help badly please. It is a portable jump movement.

  Hello

  The driving mute functionality is provided by the audio software package, so most likely, Windows has updated this to a version that does not have this feature.

  Try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63555.exe

  When finished, turn off your WiFi card (or if wired, just unplug the router/access point).

  Then open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver.

  When finished, restart the laptop.

  Let Windows load fully, then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  If your mute led functions now correctly, turn on your wireless adapter (or re - connect the access point / router) and use the utility on the following link to prevent Windows 10 automatically update the IDT audio driver again.

  https://support.Microsoft.com/en-GB/KB/3073930

  Kind regards

  DP - K

• (Redirected) Error POST LED codes laptop Studio XPS 1647

  (I posted this on the forum of portable equipment, but it has been a few days so far that there is no help yet).

  Symptom:

  Studio XPS 1647 computer laptop cannot start after POST and pasted to the Dell screen with about 80 percent progress bar. After that now the FN key and press the power button to start ePSA, all three volumes would be flashes two times, immediately followed by the MUTE LED flashing layout and then jump, followed by up and down LEDs + turn signals and the volume upward the LED switches off the coast and then just the Volume Down LED flashing continuously. The fan is switched on immediately after the PSA starts at slow speed, and then it runs faster after a few seconds with the noises.

  My Studio XPS 1647 has recently had overheating problems, and sometimes they would cause BSOD. A reboot after BSOD shows always broke the screen images. The BSOD has always come with error bcode 116: it's apparently related video card. Last weekend so I opened the case, removed the radiator and fan. The event of heat sink was completely blocked with a thick layer of dust, so it is no wonder the overheating. I have cleaned the vent system to the radiator and fan, cleaned the top of the processor and the upper part of the GPU chip, the shape of base paste heat and everything back together. After that, the machine could not go to the Dell splash screen at startup.   I already checked the discussions and followed suggestions on holding down the power button to remove static, the reinstallation of the memory card, etc., but they are of no use.

  The following video shows the locking POST LED codes:
  http://youtu.be/l0zbweEeCYY

  cs_setInnerHtml ('video_ecc56317-e9df - 4 c 82-a36d-f4e0f34ae06b', ");

  Thank you
  Troy

  Hi shng,.

  Mobile forum would be the right place to get help. Back to the forum of the laptop and make a comment on your original post so it floats on top again.

  http://en.community.Dell.com/support-forums/laptop/

• HP 15 - d008tu, MODEL - F6D29PA: audio

  Mr President.

  I recently updated windows 8.1 to Windows 10 pro before 1 month, after that I found that my audio is not as same as previous. also, my button mute is not lighting it is only functioning, I previously realtek hd audio driver, but I can't find it after the upgrade instead I have microphone (audio device high definition and 2 high definition speaker audio device. so I request to you please solve my problem as soon as possible.)

  Hi @rajat08,

  Welcome to the HP Forums! I read your post and wanted to help.

  I understand that the sound is different after upgrade to Windows 10, mute LED is not lit, and the audio driver is missing.

  Reinstall the audio driver: sp71918.exe restart your laptop and check the sound, cut the light and the audio driver again.

  The link for all the drivers: http://support.hp.com/us-en/drivers/selfservice/HP-15-d000-Notebook-PC-series/6529963/model/6622223

  Let me know if it helps.

  If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• DV7-lights remain on after stopping

  I have a problem with laptop DV7 - 3164CL s.  Everything works perfectly EXCEPT when I stopped, the machine stops (power led on front left goes and top off) but the mute led, the volume, the multimedia control slider of the duct and the stay of the adapter wireless led (orange now) all the lit.  There is no disk activity and, except for the led stays on, it would appear that the machine has stopped.

  I did a full system recovery, made all updates of HP driver, all the Windows updates, latest version of the bios installed.  The problem still manifests.  I'm now leaning towards a material defect problem or maybe a bad connector plugged in the led Panel?  Any suggestions would be greatly appreciated.

  Thank you, in advance.

  Bob R.

  This problem is no longer.  I had posted a thread separate here; but responding to a similar problem here:

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/HP-Pavilion-dv7-computer-keeps-shutting-down-by-itself/m-p/2406561/highlight/false#M33934

  It's the same problem, two positions.  Thanks for helping - I don't know what we would do without the forums and google.  Many problems are solved here.  It was surprising to see how few people know about this thing with the lights on after his stop.  Perhaps our conclusions and our messages will help someone else with this problem.

• Yoga ThinkPad FN keys

  Hello

  I completely reinstalled windows 8.1 pro on my ThinkPad Yoga. After that, I installed all the drivers, including the updates provided by Microsoft and Lenovo (using the 5 Lenovo system update).

  But I can't use all the FN keys (which means special functions such as the opening of the bar pane windows 8 settings...) Also the orange led is lit on the F1 key (I guess this must indicate that my speakers are muted - but this led is always on).

  What should I do or what I have to install also using all special keys FN, including the correct indication of the mute-LED?

  you have the screen on installed? check under uninstall menu in Control Panel.

• Silent allways orange but work and volume/tone are not displayed.

  I have a 1100-DV8T running win7 pro.  Product #vf836av.  Once Microsoft fixed a few issues that I noticed that the Mute button is still orange but works correctly.  Settings mute, volume and tone do not appear on the screen when you use the touch buttons which makes it difficult to know what is happening.  I guess that's probably a driver issue since it occurred when the pilot for a hard drive problem.  I already tried a hard reset with no luck.   Any suggestion?  Any help would be appreciated.

  Hello

  Regarding the status of the mute LED, try the following.

  Download IDT Audio Installer on the link below and save it in your downloads folder.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48945.exe

  One time finished, open windows control panel, open Device Manager and open sound, video and game controllers.  Right click on the IDT device and select uninstall - also, you should get a command prompt to delete the current driver, check the box allow this and then proceed to uninstall.

  When finished, restart the laptop.

  Allow Windows to fully - charge it will automatically load an audio driver, but let just this complete.  Then open your download folder, right-click on the IDT Installer and select "Run as Administrator" to launch the installation.  When this has completed, restart the computer again.

  On-screen display for volume etc is provided by HP MediaSmart SmartMenu which can be downloaded from the following link.

  http://ftp.HP.com/pub/SoftPaq/sp48501-49000/sp48552.exe

  Once the installation is complete, you will need to restart the laptop.

  Kind regards

  DP - K

• HP Mini 210: Sound silent light 'stuck' on

  This computer was initially provided with Windows 7 Starter. I recently uppgraded to windows 7 Home Premium, 64-bit.

  Initially, I had bad turn the wi-fi/bluetooth radio.

  Now the radio will function correctly but the volume mute led is on, but the sound of the computer is not cut.

  I can turn off the sound by using the icon in the system tray.

  Any ideas?

  I know it's a little slow, but a bit boring.

  Thanks in advance.

  Here is the final verdict which has solved the problems for me.

  Computer: HP Mini 210 t-1000

  Operating system: Win7 (originally shipped with Starter - 32 bit; upgraded to Home Premium 64-bit edition)

  All other parameters are OEM

  When the Home Premium 64-bit Win7 was installed there are a few problems of key board because the sound has not might be cut from the keyboard (stuck on silent light) and wi-fi/bluetooth could not be extinguished (taped to light; required function two presses of the key wireless turns off).

  These two issues have been resolved, thanks in part to the good advice of HP Support Agent D5GR!  View to look at the pilot sets put me on the track of successful correction gaps.  Note: I was very careful to replace the chipset drives until I did research more. That would be my last option.

  So, my first step, then, was to look at all the drivers of the computer. D5GR has provided the link (see his response me above/below) by pilots.  Given that the original machine is equipped with a 32 bit OS, I excluded all the "32-bit only" downloads in this section.  That included the driver chipset - BTW

  Then, I downloaded all the drivers and utilities that were compatible with the 64 bit OS.  This includes the audio driver (sp49308.exe), wireless driver (sp48591.exe) for the Broadcom adapter installed and the Wizard (sp45222) wireless. There are a couple, but I didn't feel that they were relevant to this situation.

  After each installation, a reboot has been accomplished.  When I had finished all the problems have been corrected; the computer works perfectly.

  Finally, it should be noted that when a retail upgrade (not HP) is installed, there are the features expected that are not addressed in this upgrade - it is usually an OEM "generic."  These gaps must be filled with the provided HP solutions for the specific computer that you are upgrading.

  That is my lesson learned in a few words.

  Once again thank you D5GR for your advice and continue.  HP; the only way! ><>